Skip to contentSkip to conversation

yocto touchscreen

DISCUSSION Stanisavljevic 3 participants 17 messages Feb 4, 2019 – Apr 17, 2019

lore
Share & tools
lore
#0 lore raw

Hy Team,

I have a problem

I buid a custom os for AM335x processor and I used yocto to do it.

I build a first version of this os with version krogoth and it work fine.

Now I build a second version of this os with version sumo and the touchscreen work fine during boot process but when kernel is loaded, touchscreen freeze / lock and impossible to use it.

The terminal is printed on the touchscreen but the screen is locked, impossible to write a command or to move the mouse to select, ..

Here is the log of boot to the user session (log got with serial communication between PC and board) :

U-Boot SPL 2017.05-00001-g041a398 (May 02 2018 - 18:36:57)

Trying to boot from MMC1

reading uboot.env

reading u-boot.img

reading u-boot.img

reading u-boot.img

reading u-boot.img

U-Boot 2017.05-00001-g041a398 (May 02 2018 - 18:36:57 +0200)

CPU : AM335X-GP rev 2.1

Model: TI AM335x EVM-SK

DRAM: 256 MiB

NAND: 0 MiB

MMC: OMAP SD/MMC: 0, OMAP SD/MMC: 1

reading uboot.env

ERROR: No USB device found

at drivers/usb/gadget/ether.c:2709/usb_ether_init()

Net: CACHE: Misaligned operation at range [8df323c0, 8df32464]

Warning: ethernet@4a100000 using MAC address from ROM

eth0: ethernet@4a100000

Hit any key to stop autoboot: 0

reading zImage

3412752 bytes read in 251 ms (13 MiB/s)

reading dtb

39733 bytes read in 12 ms (3.2 MiB/s)

## Flattened Device Tree blob at 82000000

Booting using the fdt blob at 0x82000000

Loading Device Tree to 8df19000, end 8df25b34 ... OK

Starting kernel ...

[    0.000000] Booting Linux on physical CPU 0x0
[    0.000000] Initializing cgroup subsys cpu
[    0.000000] Initializing cgroup subsys cpuacct
[    0.000000] Linux version 4.4.19-ge581bb1cac

(polycaptil@polycaptil-HP-Notebook) (gcc version 5.3.0 (GCC) ) #1 PREEMPT Thu May 24 11:42:17 CEST 2018

[    0.000000] CPU: ARMv7 Processor [413fc082] revision 2 (ARMv7),

cr=10c5387d

[    0.000000] CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing

instruction cache

[    0.000000] Machine model: TI AM335x EVM-SK
[    0.000000] cma: Reserved 48 MiB at 0x8a800000
[    0.000000] Memory policy: Data cache writeback
[    0.000000] CPU: All CPU(s) started in SVC mode.
[    0.000000] AM335X ES2.1 (sgx neon )
[    0.000000] Built 1 zonelists in Zone order, mobility grouping on.  Total

pages: 64960

[    0.000000] Kernel command line: console=ttyO0,115200 root=/dev/mmcblk0p3

rw

[    0.000000] PID hash table entries: 1024 (order: 0, 4096 bytes)
[    0.000000] Dentry cache hash table entries: 32768 (order: 5, 131072

bytes)

[    0.000000] Inode-cache hash table entries: 16384 (order: 4, 65536 bytes)
[    0.000000] Memory: 200444K/262144K available (6495K kernel code, 313K

rwdata, 2368K rodata, 260K init, 265K bss, 12548K reserved, 49152K cma-reserved, 0K highmem)

[    0.000000] Virtual kernel memory layout:
[    0.000000]     vector  : 0xffff0000 - 0xffff1000   (   4 kB)
[    0.000000]     fixmap  : 0xffc00000 - 0xfff00000   (3072 kB)
[    0.000000]     vmalloc : 0xd0800000 - 0xff800000   ( 752 MB)
[    0.000000]     lowmem  : 0xc0000000 - 0xd0000000   ( 256 MB)
[    0.000000]     pkmap   : 0xbfe00000 - 0xc0000000   (   2 MB)
[    0.000000]     modules : 0xbf000000 - 0xbfe00000   (  14 MB)
[    0.000000]       .text : 0xc0008000 - 0xc08b0034   (8865 kB)
[    0.000000]       .init : 0xc08b1000 - 0xc08f2000   ( 260 kB)
[    0.000000]       .data : 0xc08f2000 - 0xc09407f0   ( 314 kB)
[    0.000000]        .bss : 0xc09407f0 - 0xc0982d58   ( 266 kB)
[    0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=1, Nodes=1
[    0.000000] Preemptible hierarchical RCU implementation.
[    0.000000]  Build-time adjustment of leaf fanout to 32.
[    0.000000] NR_IRQS:16 nr_irqs:16 16
[    0.000000] IRQ: Found an INTC at 0xfa200000 (revision 5.0) with 128

interrupts

[    0.000000] OMAP clockevent source: timer2 at 24000000 Hz
[    0.000015] sched_clock: 32 bits at 24MHz, resolution 41ns, wraps every

89478484971ns

[    0.000036] clocksource: timer1: mask: 0xffffffff max_cycles: 0xffffffff,

max_idle_ns: 79635851949 ns

[    0.000047] OMAP clocksource: timer1 at 24000000 Hz
[    0.000222] clocksource_probe: no matching clocksources found
[    0.000415] Console: colour dummy device 80x30
[    0.000442] WARNING: Your 'console=ttyO0' has been replaced by 'ttyS0'
[    0.000448] This ensures that you still see kernel messages. Please
[    0.000454] update your kernel commandline.
[    0.000473] Calibrating delay loop... 795.44 BogoMIPS (lpj=3977216)
[    0.089064] pid_max: default: 32768 minimum: 301
[    0.089193] Mount-cache hash table entries: 1024 (order: 0, 4096 bytes)
[    0.089205] Mountpoint-cache hash table entries: 1024 (order: 0, 4096

bytes)

[    0.089932] Initializing cgroup subsys io
[    0.089964] Initializing cgroup subsys memory
[    0.090005] Initializing cgroup subsys devices
[    0.090021] Initializing cgroup subsys freezer
[    0.090036] Initializing cgroup subsys perf_event
[    0.090048] Initializing cgroup subsys pids
[    0.090078] CPU: Testing write buffer coherency: ok
[    0.090499] Setting up static identity map for 0x80008200 - 0x80008258
[    0.092680] devtmpfs: initialized
[    0.105440] VFP support v0.3: implementor 41 architecture 3 part 30

variant c rev 3

[    0.120529] omap_hwmod: debugss: _wait_target_disable failed
[    0.175584] clocksource: jiffies: mask: 0xffffffff max_cycles:

0xffffffff, max_idle_ns: 19112604462750000 ns

[    0.179852] pinctrl core: initialized pinctrl subsystem
[    0.181216] NET: Registered protocol family 16
[    0.183420] DMA: preallocated 256 KiB pool for atomic coherent

allocations

[    0.209061] cpuidle: using governor ladder
[    0.239048] cpuidle: using governor menu
[    0.243661] OMAP GPIO hardware version 0.1
[    0.254360] hw-breakpoint: debug architecture 0x4 unsupported.
[    0.297629] edma 49000000.edma: TI EDMA DMA engine driver
[    0.298606] reg-fixed-voltage fixedregulator@2: could not find pctldev

for node /ocp/l4_wkup@44c00000/scm@210000/pinmux@800/pinmux_wl12xx_gpio, deferring probe

[    0.302364] omap_i2c 44e0b000.i2c: could not find pctldev for node

/ocp/l4_wkup@44c00000/scm@210000/pinmux@800/pinmux_i2c0_pins, deferring probe

[    0.302525] media: Linux media interface: v0.10
[    0.302588] Linux video capture interface: v2.00
[    0.302638] pps_core: LinuxPPS API ver. 1 registered
[    0.302646] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo

Giometti <[email protected]>

[    0.302676] PTP clock support registered
[    0.302741] EDAC MC: Ver: 3.0.0
[    0.303966] omap-mailbox 480c8000.mailbox: omap mailbox rev 0x400
[    0.304332] Advanced Linux Sound Architecture Driver Initialized.
[    0.305512] clocksource: Switched to clocksource timer1
[    0.316775] NET: Registered protocol family 2
[    0.317599] TCP established hash table entries: 2048 (order: 1, 8192

bytes)

[    0.317636] TCP bind hash table entries: 2048 (order: 1, 8192 bytes)
[    0.317663] TCP: Hash tables configured (established 2048 bind 2048)
[    0.317748] UDP hash table entries: 256 (order: 0, 4096 bytes)
[    0.317767] UDP-Lite hash table entries: 256 (order: 0, 4096 bytes)
[    0.317925] NET: Registered protocol family 1
[    0.318352] RPC: Registered named UNIX socket transport module.
[    0.318366] RPC: Registered udp transport module.
[    0.318372] RPC: Registered tcp transport module.
[    0.318379] RPC: Registered tcp NFSv4.1 backchannel transport module.
[    0.319330] hw perfevents: enabled with armv7_cortex_a8 PMU driver, 5

counters available

[    0.321392] futex hash table entries: 256 (order: -1, 3072 bytes)
[    0.329780] squashfs: version 4.0 (2009/01/31) Phillip Lougher
[    0.330717] NFS: Registering the id_resolver key type
[    0.330798] Key type id_resolver registered
[    0.330807] Key type id_legacy registered
[    0.330886] ntfs: driver 2.1.32 [Flags: R/O].
[    0.334673] Block layer SCSI generic (bsg) driver version 0.4 loaded

(major 248)

[    0.334706] io scheduler noop registered
[    0.334719] io scheduler deadline registered
[    0.334877] io scheduler cfq registered (default)
[    0.336555] pinctrl-single 44e10800.pinmux: 142 pins at pa f9e10800 size

568

[    0.339415] backlight supply power not found, using dummy regulator
[    0.402480] Serial: 8250/16550 driver, 10 ports, IRQ sharing disabled
[    0.406962] 44e09000.serial: ttyS0 at MMIO 0x44e09000 (irq = 158,

base_baud = 3000000) is a 8250

[    1.017357] console [ttyS0] enabled
[    1.022206] 48022000.serial: ttyS1 at MMIO 0x48022000 (irq = 159,

base_baud = 3000000) is a 8250

[    1.032273] [drm] Initialized drm 1.1.0 20060810
[    1.039564] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
[    1.046349] [drm] No driver support for vblank timestamp query.
[    1.062121] Console: switching to colour frame buffer device 60x34
[    1.070360] tilcdc 4830e000.lcdc: fb0:  frame buffer device
[    1.105531] [drm] Initialized tilcdc 1.0.0 20121205 on minor 0
[    1.118644] loop: module loaded
[    1.124253] libphy: Fixed MDIO Bus: probed
[    1.185550] davinci_mdio 4a101000.mdio: davinci mdio revision 1.6
[    1.191695] davinci_mdio 4a101000.mdio: detected phy mask fffffffe
[    1.198786] libphy: 4a101000.mdio: probed
[    1.202886] davinci_mdio 4a101000.mdio: phy[0]: device 4a101000.mdio:00,

driver SMSC LAN8710/LAN8720

[    1.212890] cpsw 4a100000.ethernet: Detected MACID = a0:f6:fd:4c:a6:ba
[    1.220531] cpsw 4a100000.ethernet: cpsw: Detected MACID =

c4:ed:ba:88:2a:92

[    1.229382] mousedev: PS/2 mouse device common for all mice
[    1.235845] i2c /dev entries driver
[    1.240508] cpuidle: enable-method property 'ti,am3352' found operations
[    1.248197] omap_hsmmc 48060000.mmc: Got CD GPIO
[    1.275713] pinctrl-single 44e10800.pinmux: bad data for mux

pinmux_mmc2_pins

[    1.282895] pinctrl-single 44e10800.pinmux: no pins entries for

pinmux_mmc2_pins

[    1.317159] ledtrig-cpu: registered to indicate activity on CPUs
[    1.326069] NET: Registered protocol family 10
[    1.332092] sit: IPv6 over IPv4 tunneling driver
[    1.337715] NET: Registered protocol family 17
[    1.342510] Key type dns_resolver registered
[    1.347095] omap_voltage_late_init: Voltage driver support not added
[    1.407145] tps65910-rtc tps65910-rtc: rtc core: registered tps65910-rtc

as rtc0

[    1.415278] omap_i2c 44e0b000.i2c: bus 0 rev0.11 at 400 kHz
[    1.421665] omap_hsmmc 48060000.mmc: Got CD GPIO
[    1.426813] vmmc: supplied by vbat
[    1.466341] pinctrl-single 44e10800.pinmux: bad data for mux

pinmux_mmc2_pins

[    1.474737] pinctrl-single 44e10800.pinmux: no pins entries for

pinmux_mmc2_pins

[    1.513247] mmc0: host does not support reading read-only switch,

assuming write-enable

[    1.523414] mmc0: new high speed SDHC card at address 0001
[    1.529635] mmcblk0: mmc0:0001 AS 3.72 GiB
[    1.535996]  mmcblk0: p1 p2 p3
[    1.595932] vdd_mpu: supplied by vbat
[    1.602167] input: gpio_buttons@0 as

/devices/platform/gpio_buttons@0/input/input0

[    1.618291] tps65910-rtc tps65910-rtc: setting system clock to 2019-02-01

20:07:49 UTC (1549051669)

[    1.639394] lis3_reg: disabling
[    1.655732] ALSA device list:
[    1.658720]   No soundcards found.
[    1.678290] EXT4-fs (mmcblk0p3): couldn't mount as ext3 due to feature

incompatibilities

[    1.696920] EXT4-fs (mmcblk0p3): couldn't mount as ext2 due to feature

incompatibilities

[    2.183999] EXT4-fs (mmcblk0p3): recovery complete
[    2.196864] EXT4-fs (mmcblk0p3): mounted filesystem with ordered data

mode. Opts: (null)

[    2.205084] VFS: Mounted root (ext4 filesystem) on device 179:3.
[    2.225670] devtmpfs: mounted
[    2.235781] Freeing unused kernel memory: 260K (c08b1000 - c08f2000)
[    2.242162] This architecture does not have kernel memory protection.

INIT: version 2.88 booting

Starting udev

[    3.090091] udevd[78]: starting version 3.2.5
[    3.106175] random: udevd: uninitialized urandom read (16 bytes read, 26

bits of entropy available)

[    3.118667] random: udevd: uninitialized urandom read (16 bytes read, 26

bits of entropy available)

[    3.128014] random: udevd: uninitialized urandom read (16 bytes read, 26

bits of entropy available)

[    3.137335] random: udevd: uninitialized urandom read (16 bytes read, 26

bits of entropy available)

[    3.218433] udevd[79]: starting eudev-3.2.5
[    3.325886] random: udevd: uninitialized urandom read (16 bytes read, 29

bits of entropy available)

[    3.346155] random: udevd: uninitialized urandom read (16 bytes read, 29

bits of entropy available)

[    4.820708] EXT4-fs (mmcblk0p3): re-mounted. Opts: data=ordered
[    5.548283] random: dd: uninitialized urandom read (512 bytes read, 43

bits of entropy available)

INIT: Entering runlevel: 5

Configuring network interfaces... [ 5.820546] net eth0: initializing cpsw
version 1.12 (0)

[    5.825987] net eth0: initialized cpsw ale version 1.4
[    5.831150] net eth0: ALE Table size 1024
[    5.838581] net eth0: phy found : id is : 0x7c0f1
[    5.851838] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
[    9.896392] cpsw 4a100000.ethernet eth0: Link is Up - 100Mbps/Full - flow

control rx/tx

[    9.904635] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready

chown: unrecognized option '--reference=/etc/resolv.conf'

BusyBox v1.27.2 (2018-11-05 21:16:09 UTC) multi-call binary.

Usage: chown [-Rh]... USER[:[GRP]] FILE...

chmod: unrecognized option '--reference=/etc/resolv.conf'

BusyBox v1.27.2 (2018-11-05 21:16:09 UTC) multi-call binary.

Usage: chmod [-R] MODE[,MODE]... FILE...

done.

Starting system message bus: [ 14.887099] random: dbus-daemon:
uninitialized urandom read (12 bytes read, 62 bits of entropy available)

[   14.912318] random: dbus-daemon: uninitialized urandom read (12 bytes

read, 62 bits of entropy available)

dbus.

Starting OpenBSD Secure Shell server: sshd

[   15.393971] random: sshd: uninitialized urandom read (32 bytes read, 65

bits of entropy available)

done.

Starting Xserver

Starting DHCP server:

.

starting DNS forwarder and DHCP server: dnsmasq...

X.Org X Server 1.19.6

Release Date: 2017-12-20

X Protocol Version 11, Revision 0

Build Operating System: Linux 4.15.0-38-generic x86_64

Current Operating System: Linux polycaptil-machine-am335x-evmsk 4.4.19-ge581bb1cac #1 PREEMPT Thu May 24 11:42:17 CEST 2018 armv7l

Kernel command line: console=ttyO0,115200 root=/dev/mmcblk0p3 rw

Build Date: 05 November 2018 09:33:21PM

Current version of pixman: 0.34.0

Before reporting problems, check http://wiki.x.org

to make sure that you have the latest version.

Markers: (--) probed, (**) from config file, (==) default setting,

(++) from command line, (!!) notice, (II) informational,

(WW) warning, (EE) error, (NI) not implemented, (??) unknown.

(==) Log file: "/var/log/Xorg.0.log", Time: Fri Feb 1 20:08:02 2019

(==) Using config file: "/etc/X11/xorg.conf"

(==) Using system config directory "/usr/share/X11/xorg.conf.d"

done.

Starting HOSTAP Daemon: Configuration file: /etc/hostapd.conf

nl80211: 'nl80211' generic netlink not found

Failed to initialize driver 'nl80211'

wlan0: interface state UNINITIALIZED->DISABLED

wlan0: AP-DISABLED

hostapd_free_hapd_data: Interface wlan0 wasn't started

Starting ntpd: done

Starting syslogd/klogd: done

Starting crond: OK

Poky (Yocto Project Reference Distro) 2.5 polycaptil-machine-am335x-evmsk /dev/ttyS0

polycaptil-machine-am335x-evmsk login: D-BUS per-session daemon address is:
unix:abstract=/tmp/dbus-07WuJSySeb,guid=a3e41f2692316c19766e95535c54a725

Size 1024x768 not found in available modes

Error: No calibratable devices found.

matchbox: Cant find a keycode for keysym 269025056

matchbox: ignoring key shortcut XF86Calendar=!$contacts

matchbox: Cant find a keycode for keysym 2809

matchbox: ignoring key shortcut telephone=!$dates

matchbox: Cant find a keycode for keysym 269025050

matchbox: ignoring key shortcut XF86Start=!matchbox-remote -desktop

dbus-daemon[358]: Activating service name='org.a11y.atspi.Registry' requested by ':1.0' (uid=0 pid=354 comm="matchbox-terminal ")

dbus-daemon[358]: Successfully activated service 'org.a11y.atspi.Registry'

SpiRegistry daemon is running with well-known name - org.a11y.atspi.Registry

[   30.662697] random: nonblocking pool is initialized

Poky (Yocto Project Reference Distro) 2.5 polycaptil-machine-am335x-evmsk /dev/ttyS0

Thank's to take time to read my message.

N.Stanisavljevic

#1 lore raw
Quoted 5 lines

I built a first version of this os with version krogoth and it works fine.

Now I build a second version of this os with version sumo and the touch screen works fine during boot process but when kernel is loaded, touchscreen freeze / lock and impossible to use it.

Did you compare Krogoth kernel defconfig with Sumo kernel defconfig?

May there are some mismatches in drivers' setup between these two?

Zoran
_______

Quoted 592 lines · Stanisavljevic

Hy Team,

I have a problem

I buid a custom os for AM335x processor and I used yocto to do it.

I build a first version of this os with version krogoth and it work fine.

Now I build a second version of this os with version sumo and the touchscreen work fine during boot process but when kernel is loaded, touchscreen freeze / lock and impossible to use it.

The terminal is printed on the touchscreen but the screen is locked, impossible to write a command or to move the mouse to select, ….

Here is the log of boot to the user session (log got with serial communication between PC and board) :

U-Boot SPL 2017.05-00001-g041a398 (May 02 2018 - 18:36:57)

Trying to boot from MMC1

reading uboot.env

reading u-boot.img

reading u-boot.img

reading u-boot.img

reading u-boot.img

U-Boot 2017.05-00001-g041a398 (May 02 2018 - 18:36:57 +0200)

CPU : AM335X-GP rev 2.1

Model: TI AM335x EVM-SK

DRAM: 256 MiB

NAND: 0 MiB

MMC: OMAP SD/MMC: 0, OMAP SD/MMC: 1

reading uboot.env

ERROR: No USB device found

at drivers/usb/gadget/ether.c:2709/usb_ether_init()

Net: CACHE: Misaligned operation at range [8df323c0, 8df32464]

Warning: ethernet@4a100000 using MAC address from ROM

eth0: ethernet@4a100000

Hit any key to stop autoboot: 0

reading zImage

3412752 bytes read in 251 ms (13 MiB/s)

reading dtb

39733 bytes read in 12 ms (3.2 MiB/s)

## Flattened Device Tree blob at 82000000

Booting using the fdt blob at 0x82000000

Loading Device Tree to 8df19000, end 8df25b34 ... OK

Starting kernel ...

[    0.000000] Booting Linux on physical CPU 0x0
[    0.000000] Initializing cgroup subsys cpu
[    0.000000] Initializing cgroup subsys cpuacct
[    0.000000] Linux version 4.4.19-ge581bb1cac (polycaptil@polycaptil-HP-Notebook) (gcc version 5.3.0 (GCC) ) #1 PREEMPT Thu May 24 11:42:17 CEST 2018
[    0.000000] CPU: ARMv7 Processor [413fc082] revision 2 (ARMv7), cr=10c5387d
[    0.000000] CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instruction cache
[    0.000000] Machine model: TI AM335x EVM-SK
[    0.000000] cma: Reserved 48 MiB at 0x8a800000
[    0.000000] Memory policy: Data cache writeback
[    0.000000] CPU: All CPU(s) started in SVC mode.
[    0.000000] AM335X ES2.1 (sgx neon )
[    0.000000] Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 64960
[    0.000000] Kernel command line: console=ttyO0,115200 root=/dev/mmcblk0p3 rw
[    0.000000] PID hash table entries: 1024 (order: 0, 4096 bytes)
[    0.000000] Dentry cache hash table entries: 32768 (order: 5, 131072 bytes)
[    0.000000] Inode-cache hash table entries: 16384 (order: 4, 65536 bytes)
[    0.000000] Memory: 200444K/262144K available (6495K kernel code, 313K rwdata, 2368K rodata, 260K init, 265K bss, 12548K reserved, 49152K cma-reserved, 0K highmem)
[    0.000000] Virtual kernel memory layout:
[    0.000000]     vector  : 0xffff0000 - 0xffff1000   (   4 kB)
[    0.000000]     fixmap  : 0xffc00000 - 0xfff00000   (3072 kB)
[    0.000000]     vmalloc : 0xd0800000 - 0xff800000   ( 752 MB)
[    0.000000]     lowmem  : 0xc0000000 - 0xd0000000   ( 256 MB)
[    0.000000]     pkmap   : 0xbfe00000 - 0xc0000000   (   2 MB)
[    0.000000]     modules : 0xbf000000 - 0xbfe00000   (  14 MB)
[    0.000000]       .text : 0xc0008000 - 0xc08b0034   (8865 kB)
[    0.000000]       .init : 0xc08b1000 - 0xc08f2000   ( 260 kB)
[    0.000000]       .data : 0xc08f2000 - 0xc09407f0   ( 314 kB)
[    0.000000]        .bss : 0xc09407f0 - 0xc0982d58   ( 266 kB)
[    0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=1, Nodes=1
[    0.000000] Preemptible hierarchical RCU implementation.
[    0.000000]  Build-time adjustment of leaf fanout to 32.
[    0.000000] NR_IRQS:16 nr_irqs:16 16
[    0.000000] IRQ: Found an INTC at 0xfa200000 (revision 5.0) with 128 interrupts
[    0.000000] OMAP clockevent source: timer2 at 24000000 Hz
[    0.000015] sched_clock: 32 bits at 24MHz, resolution 41ns, wraps every 89478484971ns
[    0.000036] clocksource: timer1: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 79635851949 ns
[    0.000047] OMAP clocksource: timer1 at 24000000 Hz
[    0.000222] clocksource_probe: no matching clocksources found
[    0.000415] Console: colour dummy device 80x30
[    0.000442] WARNING: Your 'console=ttyO0' has been replaced by 'ttyS0'
[    0.000448] This ensures that you still see kernel messages. Please
[    0.000454] update your kernel commandline.
[    0.000473] Calibrating delay loop... 795.44 BogoMIPS (lpj=3977216)
[    0.089064] pid_max: default: 32768 minimum: 301
[    0.089193] Mount-cache hash table entries: 1024 (order: 0, 4096 bytes)
[    0.089205] Mountpoint-cache hash table entries: 1024 (order: 0, 4096 bytes)
[    0.089932] Initializing cgroup subsys io
[    0.089964] Initializing cgroup subsys memory
[    0.090005] Initializing cgroup subsys devices
[    0.090021] Initializing cgroup subsys freezer
[    0.090036] Initializing cgroup subsys perf_event
[    0.090048] Initializing cgroup subsys pids
[    0.090078] CPU: Testing write buffer coherency: ok
[    0.090499] Setting up static identity map for 0x80008200 - 0x80008258
[    0.092680] devtmpfs: initialized
[    0.105440] VFP support v0.3: implementor 41 architecture 3 part 30 variant c rev 3
[    0.120529] omap_hwmod: debugss: _wait_target_disable failed
[    0.175584] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns
[    0.179852] pinctrl core: initialized pinctrl subsystem
[    0.181216] NET: Registered protocol family 16
[    0.183420] DMA: preallocated 256 KiB pool for atomic coherent allocations
[    0.209061] cpuidle: using governor ladder
[    0.239048] cpuidle: using governor menu
[    0.243661] OMAP GPIO hardware version 0.1
[    0.254360] hw-breakpoint: debug architecture 0x4 unsupported.
[    0.297629] edma 49000000.edma: TI EDMA DMA engine driver
[    0.298606] reg-fixed-voltage fixedregulator@2: could not find pctldev for node /ocp/l4_wkup@44c00000/scm@210000/pinmux@800/pinmux_wl12xx_gpio, deferring probe
[    0.302364] omap_i2c 44e0b000.i2c: could not find pctldev for node /ocp/l4_wkup@44c00000/scm@210000/pinmux@800/pinmux_i2c0_pins, deferring probe
[    0.302525] media: Linux media interface: v0.10
[    0.302588] Linux video capture interface: v2.00
[    0.302638] pps_core: LinuxPPS API ver. 1 registered
[    0.302646] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <[email protected]>
[    0.302676] PTP clock support registered
[    0.302741] EDAC MC: Ver: 3.0.0
[    0.303966] omap-mailbox 480c8000.mailbox: omap mailbox rev 0x400
[    0.304332] Advanced Linux Sound Architecture Driver Initialized.
[    0.305512] clocksource: Switched to clocksource timer1
[    0.316775] NET: Registered protocol family 2
[    0.317599] TCP established hash table entries: 2048 (order: 1, 8192 bytes)
[    0.317636] TCP bind hash table entries: 2048 (order: 1, 8192 bytes)
[    0.317663] TCP: Hash tables configured (established 2048 bind 2048)
[    0.317748] UDP hash table entries: 256 (order: 0, 4096 bytes)
[    0.317767] UDP-Lite hash table entries: 256 (order: 0, 4096 bytes)
[    0.317925] NET: Registered protocol family 1
[    0.318352] RPC: Registered named UNIX socket transport module.
[    0.318366] RPC: Registered udp transport module.
[    0.318372] RPC: Registered tcp transport module.
[    0.318379] RPC: Registered tcp NFSv4.1 backchannel transport module.
[    0.319330] hw perfevents: enabled with armv7_cortex_a8 PMU driver, 5 counters available
[    0.321392] futex hash table entries: 256 (order: -1, 3072 bytes)
[    0.329780] squashfs: version 4.0 (2009/01/31) Phillip Lougher
[    0.330717] NFS: Registering the id_resolver key type
[    0.330798] Key type id_resolver registered
[    0.330807] Key type id_legacy registered
[    0.330886] ntfs: driver 2.1.32 [Flags: R/O].
[    0.334673] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 248)
[    0.334706] io scheduler noop registered
[    0.334719] io scheduler deadline registered
[    0.334877] io scheduler cfq registered (default)
[    0.336555] pinctrl-single 44e10800.pinmux: 142 pins at pa f9e10800 size 568
[    0.339415] backlight supply power not found, using dummy regulator
[    0.402480] Serial: 8250/16550 driver, 10 ports, IRQ sharing disabled
[    0.406962] 44e09000.serial: ttyS0 at MMIO 0x44e09000 (irq = 158, base_baud = 3000000) is a 8250
[    1.017357] console [ttyS0] enabled
[    1.022206] 48022000.serial: ttyS1 at MMIO 0x48022000 (irq = 159, base_baud = 3000000) is a 8250
[    1.032273] [drm] Initialized drm 1.1.0 20060810
[    1.039564] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
[    1.046349] [drm] No driver support for vblank timestamp query.
[    1.062121] Console: switching to colour frame buffer device 60x34
[    1.070360] tilcdc 4830e000.lcdc: fb0:  frame buffer device
[    1.105531] [drm] Initialized tilcdc 1.0.0 20121205 on minor 0
[    1.118644] loop: module loaded
[    1.124253] libphy: Fixed MDIO Bus: probed
[    1.185550] davinci_mdio 4a101000.mdio: davinci mdio revision 1.6
[    1.191695] davinci_mdio 4a101000.mdio: detected phy mask fffffffe
[    1.198786] libphy: 4a101000.mdio: probed
[    1.202886] davinci_mdio 4a101000.mdio: phy[0]: device 4a101000.mdio:00, driver SMSC LAN8710/LAN8720
[    1.212890] cpsw 4a100000.ethernet: Detected MACID = a0:f6:fd:4c:a6:ba
[    1.220531] cpsw 4a100000.ethernet: cpsw: Detected MACID = c4:ed:ba:88:2a:92
[    1.229382] mousedev: PS/2 mouse device common for all mice
[    1.235845] i2c /dev entries driver
[    1.240508] cpuidle: enable-method property 'ti,am3352' found operations
[    1.248197] omap_hsmmc 48060000.mmc: Got CD GPIO
[    1.275713] pinctrl-single 44e10800.pinmux: bad data for mux pinmux_mmc2_pins
[    1.282895] pinctrl-single 44e10800.pinmux: no pins entries for pinmux_mmc2_pins
[    1.317159] ledtrig-cpu: registered to indicate activity on CPUs
[    1.326069] NET: Registered protocol family 10
[    1.332092] sit: IPv6 over IPv4 tunneling driver
[    1.337715] NET: Registered protocol family 17
[    1.342510] Key type dns_resolver registered
[    1.347095] omap_voltage_late_init: Voltage driver support not added
[    1.407145] tps65910-rtc tps65910-rtc: rtc core: registered tps65910-rtc as rtc0
[    1.415278] omap_i2c 44e0b000.i2c: bus 0 rev0.11 at 400 kHz
[    1.421665] omap_hsmmc 48060000.mmc: Got CD GPIO
[    1.426813] vmmc: supplied by vbat
[    1.466341] pinctrl-single 44e10800.pinmux: bad data for mux pinmux_mmc2_pins
[    1.474737] pinctrl-single 44e10800.pinmux: no pins entries for pinmux_mmc2_pins
[    1.513247] mmc0: host does not support reading read-only switch, assuming write-enable
[    1.523414] mmc0: new high speed SDHC card at address 0001
[    1.529635] mmcblk0: mmc0:0001 AS 3.72 GiB
[    1.535996]  mmcblk0: p1 p2 p3
[    1.595932] vdd_mpu: supplied by vbat
[    1.602167] input: gpio_buttons@0 as /devices/platform/gpio_buttons@0/input/input0
[    1.618291] tps65910-rtc tps65910-rtc: setting system clock to 2019-02-01 20:07:49 UTC (1549051669)
[    1.639394] lis3_reg: disabling
[    1.655732] ALSA device list:
[    1.658720]   No soundcards found.
[    1.678290] EXT4-fs (mmcblk0p3): couldn't mount as ext3 due to feature incompatibilities
[    1.696920] EXT4-fs (mmcblk0p3): couldn't mount as ext2 due to feature incompatibilities
[    2.183999] EXT4-fs (mmcblk0p3): recovery complete
[    2.196864] EXT4-fs (mmcblk0p3): mounted filesystem with ordered data mode. Opts: (null)
[    2.205084] VFS: Mounted root (ext4 filesystem) on device 179:3.
[    2.225670] devtmpfs: mounted
[    2.235781] Freeing unused kernel memory: 260K (c08b1000 - c08f2000)
[    2.242162] This architecture does not have kernel memory protection.

INIT: version 2.88 booting

Starting udev

[    3.090091] udevd[78]: starting version 3.2.5
[    3.106175] random: udevd: uninitialized urandom read (16 bytes read, 26 bits of entropy available)
[    3.118667] random: udevd: uninitialized urandom read (16 bytes read, 26 bits of entropy available)
[    3.128014] random: udevd: uninitialized urandom read (16 bytes read, 26 bits of entropy available)
[    3.137335] random: udevd: uninitialized urandom read (16 bytes read, 26 bits of entropy available)
[    3.218433] udevd[79]: starting eudev-3.2.5
[    3.325886] random: udevd: uninitialized urandom read (16 bytes read, 29 bits of entropy available)
[    3.346155] random: udevd: uninitialized urandom read (16 bytes read, 29 bits of entropy available)
[    4.820708] EXT4-fs (mmcblk0p3): re-mounted. Opts: data=ordered
[    5.548283] random: dd: uninitialized urandom read (512 bytes read, 43 bits of entropy available)

INIT: Entering runlevel: 5

Configuring network interfaces... [ 5.820546] net eth0: initializing cpsw version 1.12 (0)

[    5.825987] net eth0: initialized cpsw ale version 1.4
[    5.831150] net eth0: ALE Table size 1024
[    5.838581] net eth0: phy found : id is : 0x7c0f1
[    5.851838] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
[    9.896392] cpsw 4a100000.ethernet eth0: Link is Up - 100Mbps/Full - flow control rx/tx
[    9.904635] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready

chown: unrecognized option '--reference=/etc/resolv.conf'

BusyBox v1.27.2 (2018-11-05 21:16:09 UTC) multi-call binary.

Usage: chown [-Rh]... USER[:[GRP]] FILE...

chmod: unrecognized option '--reference=/etc/resolv.conf'

BusyBox v1.27.2 (2018-11-05 21:16:09 UTC) multi-call binary.

Usage: chmod [-R] MODE[,MODE]... FILE...

done.

Starting system message bus: [ 14.887099] random: dbus-daemon: uninitialized urandom read (12 bytes read, 62 bits of entropy available)

[   14.912318] random: dbus-daemon: uninitialized urandom read (12 bytes read, 62 bits of entropy available)

dbus.

Starting OpenBSD Secure Shell server: sshd

[   15.393971] random: sshd: uninitialized urandom read (32 bytes read, 65 bits of entropy available)

done.

Starting Xserver

Starting DHCP server:

.

starting DNS forwarder and DHCP server: dnsmasq...

X.Org X Server 1.19.6

Release Date: 2017-12-20

X Protocol Version 11, Revision 0

Build Operating System: Linux 4.15.0-38-generic x86_64

Current Operating System: Linux polycaptil-machine-am335x-evmsk 4.4.19-ge581bb1cac #1 PREEMPT Thu May 24 11:42:17 CEST 2018 armv7l

Kernel command line: console=ttyO0,115200 root=/dev/mmcblk0p3 rw

Build Date: 05 November 2018 09:33:21PM

Current version of pixman: 0.34.0

Before reporting problems, check http://wiki.x.org

to make sure that you have the latest version.

Markers: (--) probed, (**) from config file, (==) default setting,

(++) from command line, (!!) notice, (II) informational,

(WW) warning, (EE) error, (NI) not implemented, (??) unknown.

(==) Log file: "/var/log/Xorg.0.log", Time: Fri Feb 1 20:08:02 2019

(==) Using config file: "/etc/X11/xorg.conf"

(==) Using system config directory "/usr/share/X11/xorg.conf.d"

done.

Starting HOSTAP Daemon: Configuration file: /etc/hostapd.conf

nl80211: 'nl80211' generic netlink not found

Failed to initialize driver 'nl80211'

wlan0: interface state UNINITIALIZED->DISABLED

wlan0: AP-DISABLED

hostapd_free_hapd_data: Interface wlan0 wasn't started

Starting ntpd: done

Starting syslogd/klogd: done

Starting crond: OK

Poky (Yocto Project Reference Distro) 2.5 polycaptil-machine-am335x-evmsk /dev/ttyS0

polycaptil-machine-am335x-evmsk login: D-BUS per-session daemon address is: unix:abstract=/tmp/dbus-07WuJSySeb,guid=a3e41f2692316c19766e95535c54a725

Size 1024x768 not found in available modes

Error: No calibratable devices found.

matchbox: Cant find a keycode for keysym 269025056

matchbox: ignoring key shortcut XF86Calendar=!$contacts

matchbox: Cant find a keycode for keysym 2809

matchbox: ignoring key shortcut telephone=!$dates

matchbox: Cant find a keycode for keysym 269025050

matchbox: ignoring key shortcut XF86Start=!matchbox-remote -desktop

dbus-daemon[358]: Activating service name='org.a11y.atspi.Registry' requested by ':1.0' (uid=0 pid=354 comm="matchbox-terminal ")

dbus-daemon[358]: Successfully activated service 'org.a11y.atspi.Registry'

SpiRegistry daemon is running with well-known name - org.a11y.atspi.Registry

[   30.662697] random: nonblocking pool is initialized

Poky (Yocto Project Reference Distro) 2.5 polycaptil-machine-am335x-evmsk /dev/ttyS0

Thank’s to take time to read my message.

N.Stanisavljevic

--
_______________________________________________
yocto mailing list
[email protected]
https://lists.yoctoproject.org/listinfo/yocto

#2 lore raw

Hy Zoran

Thank's to take time to answer

I created a kernel recipe with a bbappend file, and, I added the same defconfig that I used for krogoth version. The bbappend for kernel recipe concern meta-ti layer.
I didn't edited defconfig file in other layers which contain a kernel recipe.

I think it's a problem which concern the screen resolution, screen frequency and adc touchscreen. Something is different between the krogoth and sumo version, but I didn't find what is changed...

Xrandr show that problem is maybe around the screen resolution.
It's show the next message : "Size 1024x768 not found in available modes"
Maybe it was changed between krogoth and sumo version...but I don't know where it is indicated if sources files...

What do you think ? problem can be around the screen resolution, screen frequency and adc touchscreen ?

Nikola

-----Message d'origine-----
De : Zoran Stojsavljevic <[email protected]> Envoyé : lundi 4 février 2019 17:08
À : Stanisavljevic <[email protected]> Cc : Yocto Project <[email protected]> Objet : Re: [yocto] yocto touchscreen

Quoted 5 lines

I built a first version of this os with version krogoth and it works fine.

Now I build a second version of this os with version sumo and the touch screen works fine during boot process but when kernel is loaded, touchscreen freeze / lock and impossible to use it.

Did you compare Krogoth kernel defconfig with Sumo kernel defconfig?

May there are some mismatches in drivers' setup between these two?

Zoran
_______

Quoted 600 lines · Stanisavljevic

Hy Team,

I have a problem

I buid a custom os for AM335x processor and I used yocto to do it.

I build a first version of this os with version krogoth and it work fine.

Now I build a second version of this os with version sumo and the touchscreen work fine during boot process but when kernel is loaded, touchscreen freeze / lock and impossible to use it.

The terminal is printed on the touchscreen but the screen is locked, impossible to write a command or to move the mouse to select, ….

Here is the log of boot to the user session (log got with serial communication between PC and board) :

U-Boot SPL 2017.05-00001-g041a398 (May 02 2018 - 18:36:57)

Trying to boot from MMC1

reading uboot.env

reading u-boot.img

reading u-boot.img

reading u-boot.img

reading u-boot.img

U-Boot 2017.05-00001-g041a398 (May 02 2018 - 18:36:57 +0200)

CPU : AM335X-GP rev 2.1

Model: TI AM335x EVM-SK

DRAM: 256 MiB

NAND: 0 MiB

MMC: OMAP SD/MMC: 0, OMAP SD/MMC: 1

reading uboot.env

ERROR: No USB device found

at drivers/usb/gadget/ether.c:2709/usb_ether_init()

Net: CACHE: Misaligned operation at range [8df323c0, 8df32464]

Warning: ethernet@4a100000 using MAC address from ROM

eth0: ethernet@4a100000

Hit any key to stop autoboot: 0

reading zImage

3412752 bytes read in 251 ms (13 MiB/s)

reading dtb

39733 bytes read in 12 ms (3.2 MiB/s)

## Flattened Device Tree blob at 82000000

Booting using the fdt blob at 0x82000000

Loading Device Tree to 8df19000, end 8df25b34 ... OK

Starting kernel ...

[    0.000000] Booting Linux on physical CPU 0x0
[    0.000000] Initializing cgroup subsys cpu
[    0.000000] Initializing cgroup subsys cpuacct
[    0.000000] Linux version 4.4.19-ge581bb1cac (polycaptil@polycaptil-HP-Notebook) (gcc version 5.3.0 (GCC) ) #1 PREEMPT Thu May 24 11:42:17 CEST 2018
[    0.000000] CPU: ARMv7 Processor [413fc082] revision 2 (ARMv7), cr=10c5387d
[    0.000000] CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instruction cache
[    0.000000] Machine model: TI AM335x EVM-SK
[    0.000000] cma: Reserved 48 MiB at 0x8a800000
[    0.000000] Memory policy: Data cache writeback
[    0.000000] CPU: All CPU(s) started in SVC mode.
[    0.000000] AM335X ES2.1 (sgx neon )
[    0.000000] Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 64960
[    0.000000] Kernel command line: console=ttyO0,115200 root=/dev/mmcblk0p3 rw
[    0.000000] PID hash table entries: 1024 (order: 0, 4096 bytes)
[    0.000000] Dentry cache hash table entries: 32768 (order: 5, 131072 bytes)
[    0.000000] Inode-cache hash table entries: 16384 (order: 4, 65536 bytes)
[    0.000000] Memory: 200444K/262144K available (6495K kernel code, 313K rwdata, 2368K rodata, 260K init, 265K bss, 12548K reserved, 49152K cma-reserved, 0K highmem)
[    0.000000] Virtual kernel memory layout:
[    0.000000]     vector  : 0xffff0000 - 0xffff1000   (   4 kB)
[    0.000000]     fixmap  : 0xffc00000 - 0xfff00000   (3072 kB)
[    0.000000]     vmalloc : 0xd0800000 - 0xff800000   ( 752 MB)
[    0.000000]     lowmem  : 0xc0000000 - 0xd0000000   ( 256 MB)
[    0.000000]     pkmap   : 0xbfe00000 - 0xc0000000   (   2 MB)
[    0.000000]     modules : 0xbf000000 - 0xbfe00000   (  14 MB)
[    0.000000]       .text : 0xc0008000 - 0xc08b0034   (8865 kB)
[    0.000000]       .init : 0xc08b1000 - 0xc08f2000   ( 260 kB)
[    0.000000]       .data : 0xc08f2000 - 0xc09407f0   ( 314 kB)
[    0.000000]        .bss : 0xc09407f0 - 0xc0982d58   ( 266 kB)
[    0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=1, Nodes=1
[    0.000000] Preemptible hierarchical RCU implementation.
[    0.000000]  Build-time adjustment of leaf fanout to 32.
[    0.000000] NR_IRQS:16 nr_irqs:16 16
[    0.000000] IRQ: Found an INTC at 0xfa200000 (revision 5.0) with 128 interrupts
[    0.000000] OMAP clockevent source: timer2 at 24000000 Hz
[    0.000015] sched_clock: 32 bits at 24MHz, resolution 41ns, wraps every 89478484971ns
[    0.000036] clocksource: timer1: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 79635851949 ns
[    0.000047] OMAP clocksource: timer1 at 24000000 Hz
[    0.000222] clocksource_probe: no matching clocksources found
[    0.000415] Console: colour dummy device 80x30
[    0.000442] WARNING: Your 'console=ttyO0' has been replaced by 'ttyS0'
[    0.000448] This ensures that you still see kernel messages. Please
[    0.000454] update your kernel commandline.
[    0.000473] Calibrating delay loop... 795.44 BogoMIPS (lpj=3977216)
[    0.089064] pid_max: default: 32768 minimum: 301
[    0.089193] Mount-cache hash table entries: 1024 (order: 0, 4096 bytes)
[    0.089205] Mountpoint-cache hash table entries: 1024 (order: 0, 4096 bytes)
[    0.089932] Initializing cgroup subsys io
[    0.089964] Initializing cgroup subsys memory
[    0.090005] Initializing cgroup subsys devices
[    0.090021] Initializing cgroup subsys freezer
[    0.090036] Initializing cgroup subsys perf_event
[    0.090048] Initializing cgroup subsys pids
[    0.090078] CPU: Testing write buffer coherency: ok
[    0.090499] Setting up static identity map for 0x80008200 - 0x80008258
[    0.092680] devtmpfs: initialized
[    0.105440] VFP support v0.3: implementor 41 architecture 3 part 30 variant c rev 3
[    0.120529] omap_hwmod: debugss: _wait_target_disable failed
[    0.175584] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns
[    0.179852] pinctrl core: initialized pinctrl subsystem
[    0.181216] NET: Registered protocol family 16
[    0.183420] DMA: preallocated 256 KiB pool for atomic coherent allocations
[    0.209061] cpuidle: using governor ladder
[    0.239048] cpuidle: using governor menu
[    0.243661] OMAP GPIO hardware version 0.1
[    0.254360] hw-breakpoint: debug architecture 0x4 unsupported.
[    0.297629] edma 49000000.edma: TI EDMA DMA engine driver
[    0.298606] reg-fixed-voltage fixedregulator@2: could not find pctldev for node /ocp/l4_wkup@44c00000/scm@210000/pinmux@800/pinmux_wl12xx_gpio, deferring probe
[    0.302364] omap_i2c 44e0b000.i2c: could not find pctldev for node /ocp/l4_wkup@44c00000/scm@210000/pinmux@800/pinmux_i2c0_pins, deferring probe
[    0.302525] media: Linux media interface: v0.10
[    0.302588] Linux video capture interface: v2.00
[    0.302638] pps_core: LinuxPPS API ver. 1 registered
[    0.302646] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <[email protected]>
[    0.302676] PTP clock support registered
[    0.302741] EDAC MC: Ver: 3.0.0
[    0.303966] omap-mailbox 480c8000.mailbox: omap mailbox rev 0x400
[    0.304332] Advanced Linux Sound Architecture Driver Initialized.
[    0.305512] clocksource: Switched to clocksource timer1
[    0.316775] NET: Registered protocol family 2
[    0.317599] TCP established hash table entries: 2048 (order: 1, 8192 bytes)
[    0.317636] TCP bind hash table entries: 2048 (order: 1, 8192 bytes)
[    0.317663] TCP: Hash tables configured (established 2048 bind 2048)
[    0.317748] UDP hash table entries: 256 (order: 0, 4096 bytes)
[    0.317767] UDP-Lite hash table entries: 256 (order: 0, 4096 bytes)
[    0.317925] NET: Registered protocol family 1
[    0.318352] RPC: Registered named UNIX socket transport module.
[    0.318366] RPC: Registered udp transport module.
[    0.318372] RPC: Registered tcp transport module.
[    0.318379] RPC: Registered tcp NFSv4.1 backchannel transport module.
[    0.319330] hw perfevents: enabled with armv7_cortex_a8 PMU driver, 5 counters available
[    0.321392] futex hash table entries: 256 (order: -1, 3072 bytes)
[    0.329780] squashfs: version 4.0 (2009/01/31) Phillip Lougher
[    0.330717] NFS: Registering the id_resolver key type
[    0.330798] Key type id_resolver registered
[    0.330807] Key type id_legacy registered
[    0.330886] ntfs: driver 2.1.32 [Flags: R/O].
[    0.334673] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 248)
[    0.334706] io scheduler noop registered
[    0.334719] io scheduler deadline registered
[    0.334877] io scheduler cfq registered (default)
[    0.336555] pinctrl-single 44e10800.pinmux: 142 pins at pa f9e10800 size 568
[    0.339415] backlight supply power not found, using dummy regulator
[    0.402480] Serial: 8250/16550 driver, 10 ports, IRQ sharing disabled
[    0.406962] 44e09000.serial: ttyS0 at MMIO 0x44e09000 (irq = 158, base_baud = 3000000) is a 8250
[    1.017357] console [ttyS0] enabled
[    1.022206] 48022000.serial: ttyS1 at MMIO 0x48022000 (irq = 159, base_baud = 3000000) is a 8250
[    1.032273] [drm] Initialized drm 1.1.0 20060810
[    1.039564] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
[    1.046349] [drm] No driver support for vblank timestamp query.
[    1.062121] Console: switching to colour frame buffer device 60x34
[    1.070360] tilcdc 4830e000.lcdc: fb0:  frame buffer device
[    1.105531] [drm] Initialized tilcdc 1.0.0 20121205 on minor 0
[    1.118644] loop: module loaded
[    1.124253] libphy: Fixed MDIO Bus: probed
[    1.185550] davinci_mdio 4a101000.mdio: davinci mdio revision 1.6
[    1.191695] davinci_mdio 4a101000.mdio: detected phy mask fffffffe
[    1.198786] libphy: 4a101000.mdio: probed
[    1.202886] davinci_mdio 4a101000.mdio: phy[0]: device 4a101000.mdio:00, driver SMSC LAN8710/LAN8720
[    1.212890] cpsw 4a100000.ethernet: Detected MACID = a0:f6:fd:4c:a6:ba
[    1.220531] cpsw 4a100000.ethernet: cpsw: Detected MACID = c4:ed:ba:88:2a:92
[    1.229382] mousedev: PS/2 mouse device common for all mice
[    1.235845] i2c /dev entries driver
[    1.240508] cpuidle: enable-method property 'ti,am3352' found operations
[    1.248197] omap_hsmmc 48060000.mmc: Got CD GPIO
[    1.275713] pinctrl-single 44e10800.pinmux: bad data for mux pinmux_mmc2_pins
[    1.282895] pinctrl-single 44e10800.pinmux: no pins entries for pinmux_mmc2_pins
[    1.317159] ledtrig-cpu: registered to indicate activity on CPUs
[    1.326069] NET: Registered protocol family 10
[    1.332092] sit: IPv6 over IPv4 tunneling driver
[    1.337715] NET: Registered protocol family 17
[    1.342510] Key type dns_resolver registered
[    1.347095] omap_voltage_late_init: Voltage driver support not added
[    1.407145] tps65910-rtc tps65910-rtc: rtc core: registered tps65910-rtc as rtc0
[    1.415278] omap_i2c 44e0b000.i2c: bus 0 rev0.11 at 400 kHz
[    1.421665] omap_hsmmc 48060000.mmc: Got CD GPIO
[    1.426813] vmmc: supplied by vbat
[    1.466341] pinctrl-single 44e10800.pinmux: bad data for mux pinmux_mmc2_pins
[    1.474737] pinctrl-single 44e10800.pinmux: no pins entries for pinmux_mmc2_pins
[    1.513247] mmc0: host does not support reading read-only switch, assuming write-enable
[    1.523414] mmc0: new high speed SDHC card at address 0001
[    1.529635] mmcblk0: mmc0:0001 AS 3.72 GiB
[    1.535996]  mmcblk0: p1 p2 p3
[    1.595932] vdd_mpu: supplied by vbat
[    1.602167] input: gpio_buttons@0 as /devices/platform/gpio_buttons@0/input/input0
[    1.618291] tps65910-rtc tps65910-rtc: setting system clock to 2019-02-01 20:07:49 UTC (1549051669)
[    1.639394] lis3_reg: disabling
[    1.655732] ALSA device list:
[    1.658720]   No soundcards found.
[    1.678290] EXT4-fs (mmcblk0p3): couldn't mount as ext3 due to feature incompatibilities
[    1.696920] EXT4-fs (mmcblk0p3): couldn't mount as ext2 due to feature incompatibilities
[    2.183999] EXT4-fs (mmcblk0p3): recovery complete
[    2.196864] EXT4-fs (mmcblk0p3): mounted filesystem with ordered data mode. Opts: (null)
[    2.205084] VFS: Mounted root (ext4 filesystem) on device 179:3.
[    2.225670] devtmpfs: mounted
[    2.235781] Freeing unused kernel memory: 260K (c08b1000 - c08f2000)
[    2.242162] This architecture does not have kernel memory protection.

INIT: version 2.88 booting

Starting udev

[    3.090091] udevd[78]: starting version 3.2.5
[    3.106175] random: udevd: uninitialized urandom read (16 bytes read, 26 bits of entropy available)
[    3.118667] random: udevd: uninitialized urandom read (16 bytes read, 26 bits of entropy available)
[    3.128014] random: udevd: uninitialized urandom read (16 bytes read, 26 bits of entropy available)
[    3.137335] random: udevd: uninitialized urandom read (16 bytes read, 26 bits of entropy available)
[    3.218433] udevd[79]: starting eudev-3.2.5
[    3.325886] random: udevd: uninitialized urandom read (16 bytes read, 29 bits of entropy available)
[    3.346155] random: udevd: uninitialized urandom read (16 bytes read, 29 bits of entropy available)
[    4.820708] EXT4-fs (mmcblk0p3): re-mounted. Opts: data=ordered
[    5.548283] random: dd: uninitialized urandom read (512 bytes read, 43 bits of entropy available)

INIT: Entering runlevel: 5

Configuring network interfaces... [ 5.820546] net eth0: initializing cpsw version 1.12 (0)

[    5.825987] net eth0: initialized cpsw ale version 1.4
[    5.831150] net eth0: ALE Table size 1024
[    5.838581] net eth0: phy found : id is : 0x7c0f1
[    5.851838] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
[    9.896392] cpsw 4a100000.ethernet eth0: Link is Up - 100Mbps/Full - flow control rx/tx
[    9.904635] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready

chown: unrecognized option '--reference=/etc/resolv.conf'

BusyBox v1.27.2 (2018-11-05 21:16:09 UTC) multi-call binary.

Usage: chown [-Rh]... USER[:[GRP]] FILE...

chmod: unrecognized option '--reference=/etc/resolv.conf'

BusyBox v1.27.2 (2018-11-05 21:16:09 UTC) multi-call binary.

Usage: chmod [-R] MODE[,MODE]... FILE...

done.

Starting system message bus: [ 14.887099] random: dbus-daemon: uninitialized urandom read (12 bytes read, 62 bits of entropy available)

[   14.912318] random: dbus-daemon: uninitialized urandom read (12 bytes read, 62 bits of entropy available)

dbus.

Starting OpenBSD Secure Shell server: sshd

[   15.393971] random: sshd: uninitialized urandom read (32 bytes read, 65 bits of entropy available)

done.

Starting Xserver

Starting DHCP server:

.

starting DNS forwarder and DHCP server: dnsmasq...

X.Org X Server 1.19.6

Release Date: 2017-12-20

X Protocol Version 11, Revision 0

Build Operating System: Linux 4.15.0-38-generic x86_64

Current Operating System: Linux polycaptil-machine-am335x-evmsk 4.4.19-ge581bb1cac #1 PREEMPT Thu May 24 11:42:17 CEST 2018 armv7l

Kernel command line: console=ttyO0,115200 root=/dev/mmcblk0p3 rw

Build Date: 05 November 2018 09:33:21PM

Current version of pixman: 0.34.0

Before reporting problems, check http://wiki.x.org

to make sure that you have the latest version.

Markers: (--) probed, (**) from config file, (==) default setting,

(++) from command line, (!!) notice, (II) informational,

(WW) warning, (EE) error, (NI) not implemented, (??) unknown.

(==) Log file: "/var/log/Xorg.0.log", Time: Fri Feb 1 20:08:02 2019

(==) Using config file: "/etc/X11/xorg.conf"

(==) Using system config directory "/usr/share/X11/xorg.conf.d"

done.

Starting HOSTAP Daemon: Configuration file: /etc/hostapd.conf

nl80211: 'nl80211' generic netlink not found

Failed to initialize driver 'nl80211'

wlan0: interface state UNINITIALIZED->DISABLED

wlan0: AP-DISABLED

hostapd_free_hapd_data: Interface wlan0 wasn't started

Starting ntpd: done

Starting syslogd/klogd: done

Starting crond: OK

Poky (Yocto Project Reference Distro) 2.5
polycaptil-machine-am335x-evmsk /dev/ttyS0

polycaptil-machine-am335x-evmsk login: D-BUS per-session daemon address is:
unix:abstract=/tmp/dbus-07WuJSySeb,guid=a3e41f2692316c19766e95535c54a7 25

Size 1024x768 not found in available modes

Error: No calibratable devices found.

matchbox: Cant find a keycode for keysym 269025056

matchbox: ignoring key shortcut XF86Calendar=!$contacts

matchbox: Cant find a keycode for keysym 2809

matchbox: ignoring key shortcut telephone=!$dates

matchbox: Cant find a keycode for keysym 269025050

matchbox: ignoring key shortcut XF86Start=!matchbox-remote -desktop

dbus-daemon[358]: Activating service name='org.a11y.atspi.Registry' requested by ':1.0' (uid=0 pid=354 comm="matchbox-terminal ")

dbus-daemon[358]: Successfully activated service 'org.a11y.atspi.Registry'

SpiRegistry daemon is running with well-known name - org.a11y.atspi.Registry

[   30.662697] random: nonblocking pool is initialized

Poky (Yocto Project Reference Distro) 2.5
polycaptil-machine-am335x-evmsk /dev/ttyS0

Thank’s to take time to read my message.

N.Stanisavljevic

--
_______________________________________________
yocto mailing list
[email protected]
https://lists.yoctoproject.org/listinfo/yocto

#3 lore raw

Hello Nikola,

Quoted 5 lines

I created a kernel recipe with a bbappend file, and, I added the same defconfig that I used for krogoth version. The bbappend for kernel recipe concern meta-ti layer. I didn't edited defconfig file in other layers which contain a kernel recipe.

It could be some problem that Sumo does not take your bbappend file into the consideration as placed.

It could be something else, as well.

I have the same issue with my defconfig file for my Thud Beagle Bone Black (BBB)
standard board. Every time I recompile my YOCTO for it for different releases, I need
to import my specific defconfig. But I use complete different repos for my standard
Beagle Bone Black than YOCTO BBB Poky reference distro.

Here is what I use in Thud (my bblayers.conf):

POKY_BBLAYERS_CONF_VERSION = "2"
BBPATH = "${TOPDIR}"
BBFILES ?= ""

BBLAYERS ?= " \
    /home/user/projects2/beaglebone-black/yocto-thud/meta-bbb \

/home/user/projects2/beaglebone-black/yocto-thud/meta-openembedded/meta-networking \

/home/user/projects2/beaglebone-black/yocto-thud/meta-openembedded/meta-oe \

/home/user/projects2/beaglebone-black/yocto-thud/meta-openembedded/meta-python

\
    /home/user/projects2/beaglebone-black/yocto-thud/meta-qt5 \
    /home/user/projects2/beaglebone-black/yocto-thud/poky/meta \
    /home/user/projects2/beaglebone-black/yocto-thud/poky/meta-poky"

There, I replace defconfig in this layer:
/home/user/projects2/beaglebone-black/yocto-thud/meta-bbb with my own defconfig.

In the directory:
/home/user/projects2/beaglebone-black/yocto-thud/meta-bbb/recipes-kernel/linux/linux-stable-4.19/beaglebone

If you use only Poky repository, then you need to read the following paragraph (how to use
your defconfig with Poky):

*[2.3.3. Changing the Configuration] YOCTO Project Linux Development Manualhttps://www.yoctoproject.org/docs/2.5/kernel-dev/kernel-dev.html#using-an-in-tree-defconfig-file
<https://www.yoctoproject.org/docs/2.5/kernel-dev/kernel-dev.html#using-an-in-tree-defconfig-file>*
*2.3.3. Changing the Configuration*

I hope this will help. Please, keep us posted!

Zoran
_______

Quoted 711 lines · Stanisavljevic

Hy Zoran

Thank's to take time to answer

I created a kernel recipe with a bbappend file, and, I added the same defconfig that I used for krogoth version.
The bbappend for kernel recipe concern meta-ti layer.
I didn't edited defconfig file in other layers which contain a kernel recipe.

I think it's a problem which concern the screen resolution, screen frequency and adc touchscreen.
Something is different between the krogoth and sumo version, but I didn't find what is changed...

Xrandr show that problem is maybe around the screen resolution. It's show the next message : "Size 1024x768 not found in available modes" Maybe it was changed between krogoth and sumo version...but I don't know where it is indicated if sources files...

What do you think ? problem can be around the screen resolution, screen frequency and adc touchscreen ?

Nikola

-----Message d'origine-----
De : Zoran Stojsavljevic <[email protected]> Envoyé : lundi 4 février 2019 17:08
À : Stanisavljevic <[email protected]> Cc : Yocto Project <[email protected]> Objet : Re: [yocto] yocto touchscreen

Quoted 1 line

I built a first version of this os with version krogoth and it works

fine.

Quoted 4 lines

Now I build a second version of this os with version sumo and the touch screen works fine during boot process but when kernel is loaded, touchscreen freeze / lock and impossible to use it.

Did you compare Krogoth kernel defconfig with Sumo kernel defconfig?

May there are some mismatches in drivers' setup between these two?

Zoran
_______

Quoted 13 lines · Stanisavljevic

Hy Team,

I have a problem

I buid a custom os for AM335x processor and I used yocto to do it.

Quoted 5 lines

I build a first version of this os with version krogoth and it work fine.

Now I build a second version of this os with version sumo and the

touchscreen work fine during boot process but when kernel is loaded, touchscreen freeze / lock and impossible to use it.

Quoted 2 lines

The terminal is printed on the touchscreen but the screen is locked,

impossible to write a command or to move the mouse to select, ….

Quoted 4 lines

Here is the log of boot to the user session (log got with serial

communication between PC and board) :

Quoted 73 lines

U-Boot SPL 2017.05-00001-g041a398 (May 02 2018 - 18:36:57)

Trying to boot from MMC1

reading uboot.env

reading u-boot.img

reading u-boot.img

reading u-boot.img

reading u-boot.img

U-Boot 2017.05-00001-g041a398 (May 02 2018 - 18:36:57 +0200)

CPU : AM335X-GP rev 2.1

Model: TI AM335x EVM-SK

DRAM: 256 MiB

NAND: 0 MiB

MMC: OMAP SD/MMC: 0, OMAP SD/MMC: 1

reading uboot.env

ERROR: No USB device found

at drivers/usb/gadget/ether.c:2709/usb_ether_init()

Net: CACHE: Misaligned operation at range [8df323c0, 8df32464]

Warning: ethernet@4a100000 using MAC address from ROM

eth0: ethernet@4a100000

Hit any key to stop autoboot: 0

reading zImage

3412752 bytes read in 251 ms (13 MiB/s)

reading dtb

39733 bytes read in 12 ms (3.2 MiB/s)

## Flattened Device Tree blob at 82000000

Booting using the fdt blob at 0x82000000

Loading Device Tree to 8df19000, end 8df25b34 ... OK

Starting kernel ...

Quoted 7 lines
[    0.000000] Booting Linux on physical CPU 0x0
[    0.000000] Initializing cgroup subsys cpu
[    0.000000] Initializing cgroup subsys cpuacct
[    0.000000] Linux version 4.4.19-ge581bb1cac

(polycaptil@polycaptil-HP-Notebook) (gcc version 5.3.0 (GCC) ) #1 PREEMPT Thu May 24 11:42:17 CEST 2018

Quoted 2 lines
[    0.000000] CPU: ARMv7 Processor [413fc082] revision 2 (ARMv7),

cr=10c5387d

Quoted 2 lines
[    0.000000] CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing

instruction cache

Quoted 5 lines
[    0.000000] Machine model: TI AM335x EVM-SK
[    0.000000] cma: Reserved 48 MiB at 0x8a800000
Quoted 7 lines
[    0.000000] Memory policy: Data cache writeback
[    0.000000] CPU: All CPU(s) started in SVC mode.
[    0.000000] AM335X ES2.1 (sgx neon )
[    0.000000] Built 1 zonelists in Zone order, mobility grouping on.

Total pages: 64960

Quoted 2 lines
[    0.000000] Kernel command line: console=ttyO0,115200

root=/dev/mmcblk0p3 rw

Quoted 4 lines
[    0.000000] PID hash table entries: 1024 (order: 0, 4096 bytes)
[    0.000000] Dentry cache hash table entries: 32768 (order: 5, 131072

bytes)

Quoted 2 lines
[    0.000000] Inode-cache hash table entries: 16384 (order: 4, 65536

bytes)

Quoted 2 lines
[    0.000000] Memory: 200444K/262144K available (6495K kernel code,

313K rwdata, 2368K rodata, 260K init, 265K bss, 12548K reserved, 49152K cma-reserved, 0K highmem)

Quoted 25 lines
[    0.000000] Virtual kernel memory layout:
[    0.000000]     vector  : 0xffff0000 - 0xffff1000   (   4 kB)
[    0.000000]     fixmap  : 0xffc00000 - 0xfff00000   (3072 kB)
[    0.000000]     vmalloc : 0xd0800000 - 0xff800000   ( 752 MB)
[    0.000000]     lowmem  : 0xc0000000 - 0xd0000000   ( 256 MB)
[    0.000000]     pkmap   : 0xbfe00000 - 0xc0000000   (   2 MB)
[    0.000000]     modules : 0xbf000000 - 0xbfe00000   (  14 MB)
[    0.000000]       .text : 0xc0008000 - 0xc08b0034   (8865 kB)
[    0.000000]       .init : 0xc08b1000 - 0xc08f2000   ( 260 kB)
[    0.000000]       .data : 0xc08f2000 - 0xc09407f0   ( 314 kB)
[    0.000000]        .bss : 0xc09407f0 - 0xc0982d58   ( 266 kB)
[    0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=1, Nodes=1
Quoted 7 lines
[    0.000000] Preemptible hierarchical RCU implementation.
[    0.000000]  Build-time adjustment of leaf fanout to 32.
[    0.000000] NR_IRQS:16 nr_irqs:16 16
[    0.000000] IRQ: Found an INTC at 0xfa200000 (revision 5.0) with 128

interrupts

Quoted 4 lines
[    0.000000] OMAP clockevent source: timer2 at 24000000 Hz
[    0.000015] sched_clock: 32 bits at 24MHz, resolution 41ns, wraps

every 89478484971ns

Quoted 2 lines
[    0.000036] clocksource: timer1: mask: 0xffffffff max_cycles:

0xffffffff, max_idle_ns: 79635851949 ns

Quoted 11 lines
[    0.000047] OMAP clocksource: timer1 at 24000000 Hz
[    0.000222] clocksource_probe: no matching clocksources found
[    0.000415] Console: colour dummy device 80x30
[    0.000442] WARNING: Your 'console=ttyO0' has been replaced by 'ttyS0'
[    0.000448] This ensures that you still see kernel messages. Please
Quoted 7 lines
[    0.000454] update your kernel commandline.
[    0.000473] Calibrating delay loop... 795.44 BogoMIPS (lpj=3977216)
[    0.089064] pid_max: default: 32768 minimum: 301
[    0.089193] Mount-cache hash table entries: 1024 (order: 0, 4096

bytes)

Quoted 2 lines
[    0.089205] Mountpoint-cache hash table entries: 1024 (order: 0, 4096

bytes)

Quoted 13 lines
[    0.089932] Initializing cgroup subsys io
[    0.089964] Initializing cgroup subsys memory
[    0.090005] Initializing cgroup subsys devices
[    0.090021] Initializing cgroup subsys freezer
[    0.090036] Initializing cgroup subsys perf_event
[    0.090048] Initializing cgroup subsys pids
Quoted 7 lines
[    0.090078] CPU: Testing write buffer coherency: ok
[    0.090499] Setting up static identity map for 0x80008200 - 0x80008258
[    0.092680] devtmpfs: initialized
[    0.105440] VFP support v0.3: implementor 41 architecture 3 part 30

variant c rev 3

Quoted 4 lines
[    0.120529] omap_hwmod: debugss: _wait_target_disable failed
[    0.175584] clocksource: jiffies: mask: 0xffffffff max_cycles:

0xffffffff, max_idle_ns: 19112604462750000 ns

Quoted 6 lines
[    0.179852] pinctrl core: initialized pinctrl subsystem
[    0.181216] NET: Registered protocol family 16
[    0.183420] DMA: preallocated 256 KiB pool for atomic coherent

allocations

Quoted 5 lines
[    0.209061] cpuidle: using governor ladder
[    0.239048] cpuidle: using governor menu
Quoted 7 lines
[    0.243661] OMAP GPIO hardware version 0.1
[    0.254360] hw-breakpoint: debug architecture 0x4 unsupported.
[    0.297629] edma 49000000.edma: TI EDMA DMA engine driver
[    0.298606] reg-fixed-voltage fixedregulator@2: could not find

pctldev for node /ocp/l4_wkup@44c00000/scm@210000/pinmux@800/pinmux_wl12xx_gpio, deferring probe

Quoted 2 lines
[    0.302364] omap_i2c 44e0b000.i2c: could not find pctldev for node

/ocp/l4_wkup@44c00000/scm@210000/pinmux@800/pinmux_i2c0_pins, deferring probe

Quoted 8 lines
[    0.302525] media: Linux media interface: v0.10
[    0.302588] Linux video capture interface: v2.00
[    0.302638] pps_core: LinuxPPS API ver. 1 registered
[    0.302646] pps_core: Software ver. 5.3.6 - Copyright 2005-2007

Rodolfo Giometti <[email protected]>

Quoted 7 lines
[    0.302676] PTP clock support registered
[    0.302741] EDAC MC: Ver: 3.0.0
[    0.303966] omap-mailbox 480c8000.mailbox: omap mailbox rev 0x400
Quoted 7 lines
[    0.304332] Advanced Linux Sound Architecture Driver Initialized.
[    0.305512] clocksource: Switched to clocksource timer1
[    0.316775] NET: Registered protocol family 2
[    0.317599] TCP established hash table entries: 2048 (order: 1, 8192

bytes)

Quoted 13 lines
[    0.317636] TCP bind hash table entries: 2048 (order: 1, 8192 bytes)
[    0.317663] TCP: Hash tables configured (established 2048 bind 2048)
[    0.317748] UDP hash table entries: 256 (order: 0, 4096 bytes)
[    0.317767] UDP-Lite hash table entries: 256 (order: 0, 4096 bytes)
[    0.317925] NET: Registered protocol family 1
[    0.318352] RPC: Registered named UNIX socket transport module.
Quoted 7 lines
[    0.318366] RPC: Registered udp transport module.
[    0.318372] RPC: Registered tcp transport module.
[    0.318379] RPC: Registered tcp NFSv4.1 backchannel transport module.
[    0.319330] hw perfevents: enabled with armv7_cortex_a8 PMU driver, 5

counters available

Quoted 7 lines
[    0.321392] futex hash table entries: 256 (order: -1, 3072 bytes)
[    0.329780] squashfs: version 4.0 (2009/01/31) Phillip Lougher
[    0.330717] NFS: Registering the id_resolver key type
Quoted 7 lines
[    0.330798] Key type id_resolver registered
[    0.330807] Key type id_legacy registered
[    0.330886] ntfs: driver 2.1.32 [Flags: R/O].
[    0.334673] Block layer SCSI generic (bsg) driver version 0.4 loaded

(major 248)

Quoted 8 lines
[    0.334706] io scheduler noop registered
[    0.334719] io scheduler deadline registered
[    0.334877] io scheduler cfq registered (default)
[    0.336555] pinctrl-single 44e10800.pinmux: 142 pins at pa f9e10800

size 568

Quoted 6 lines
[    0.339415] backlight supply power not found, using dummy regulator
[    0.402480] Serial: 8250/16550 driver, 10 ports, IRQ sharing disabled
[    0.406962] 44e09000.serial: ttyS0 at MMIO 0x44e09000 (irq = 158,

base_baud = 3000000) is a 8250

Quoted 4 lines
[    1.017357] console [ttyS0] enabled
[    1.022206] 48022000.serial: ttyS1 at MMIO 0x48022000 (irq = 159,

base_baud = 3000000) is a 8250

Quoted 4 lines
[    1.032273] [drm] Initialized drm 1.1.0 20060810
[    1.039564] [drm] Supports vblank timestamp caching Rev 2

(21.10.2013).

Quoted 13 lines
[    1.046349] [drm] No driver support for vblank timestamp query.
[    1.062121] Console: switching to colour frame buffer device 60x34
[    1.070360] tilcdc 4830e000.lcdc: fb0:  frame buffer device
[    1.105531] [drm] Initialized tilcdc 1.0.0 20121205 on minor 0
[    1.118644] loop: module loaded
[    1.124253] libphy: Fixed MDIO Bus: probed
Quoted 7 lines
[    1.185550] davinci_mdio 4a101000.mdio: davinci mdio revision 1.6
[    1.191695] davinci_mdio 4a101000.mdio: detected phy mask fffffffe
[    1.198786] libphy: 4a101000.mdio: probed
[    1.202886] davinci_mdio 4a101000.mdio: phy[0]: device

4a101000.mdio:00, driver SMSC LAN8710/LAN8720

Quoted 4 lines
[    1.212890] cpsw 4a100000.ethernet: Detected MACID = a0:f6:fd:4c:a6:ba
[    1.220531] cpsw 4a100000.ethernet: cpsw: Detected MACID =

c4:ed:ba:88:2a:92

Quoted 6 lines
[    1.229382] mousedev: PS/2 mouse device common for all mice
[    1.235845] i2c /dev entries driver
[    1.240508] cpuidle: enable-method property 'ti,am3352' found

operations

Quoted 4 lines
[    1.248197] omap_hsmmc 48060000.mmc: Got CD GPIO
[    1.275713] pinctrl-single 44e10800.pinmux: bad data for mux

pinmux_mmc2_pins

Quoted 2 lines
[    1.282895] pinctrl-single 44e10800.pinmux: no pins entries for

pinmux_mmc2_pins

Quoted 7 lines
[    1.317159] ledtrig-cpu: registered to indicate activity on CPUs
[    1.326069] NET: Registered protocol family 10
[    1.332092] sit: IPv6 over IPv4 tunneling driver
Quoted 7 lines
[    1.337715] NET: Registered protocol family 17
[    1.342510] Key type dns_resolver registered
[    1.347095] omap_voltage_late_init: Voltage driver support not added
[    1.407145] tps65910-rtc tps65910-rtc: rtc core: registered

tps65910-rtc as rtc0

Quoted 8 lines
[    1.415278] omap_i2c 44e0b000.i2c: bus 0 rev0.11 at 400 kHz
[    1.421665] omap_hsmmc 48060000.mmc: Got CD GPIO
[    1.426813] vmmc: supplied by vbat
[    1.466341] pinctrl-single 44e10800.pinmux: bad data for mux

pinmux_mmc2_pins

Quoted 2 lines
[    1.474737] pinctrl-single 44e10800.pinmux: no pins entries for

pinmux_mmc2_pins

Quoted 2 lines
[    1.513247] mmc0: host does not support reading read-only switch,

assuming write-enable

Quoted 10 lines
[    1.523414] mmc0: new high speed SDHC card at address 0001
[    1.529635] mmcblk0: mmc0:0001 AS 3.72 GiB
[    1.535996]  mmcblk0: p1 p2 p3
[    1.595932] vdd_mpu: supplied by vbat
[    1.602167] input: gpio_buttons@0 as /devices/platform/gpio_buttons@0

/input/input0

Quoted 2 lines
[    1.618291] tps65910-rtc tps65910-rtc: setting system clock to
2019-02-01 20:07:49 UTC (1549051669)
Quoted 8 lines
[    1.639394] lis3_reg: disabling
[    1.655732] ALSA device list:
[    1.658720]   No soundcards found.
[    1.678290] EXT4-fs (mmcblk0p3): couldn't mount as ext3 due to

feature incompatibilities

Quoted 2 lines
[    1.696920] EXT4-fs (mmcblk0p3): couldn't mount as ext2 due to

feature incompatibilities

Quoted 4 lines
[    2.183999] EXT4-fs (mmcblk0p3): recovery complete
[    2.196864] EXT4-fs (mmcblk0p3): mounted filesystem with ordered data

mode. Opts: (null)

Quoted 9 lines
[    2.205084] VFS: Mounted root (ext4 filesystem) on device 179:3.
[    2.225670] devtmpfs: mounted
[    2.235781] Freeing unused kernel memory: 260K (c08b1000 - c08f2000)
[    2.242162] This architecture does not have kernel memory protection.
Quoted 7 lines

INIT: version 2.88 booting

Starting udev

[    3.090091] udevd[78]: starting version 3.2.5
[    3.106175] random: udevd: uninitialized urandom read (16 bytes read,

26 bits of entropy available)

Quoted 2 lines
[    3.118667] random: udevd: uninitialized urandom read (16 bytes read,

26 bits of entropy available)

Quoted 2 lines
[    3.128014] random: udevd: uninitialized urandom read (16 bytes read,

26 bits of entropy available)

Quoted 2 lines
[    3.137335] random: udevd: uninitialized urandom read (16 bytes read,

26 bits of entropy available)

Quoted 4 lines
[    3.218433] udevd[79]: starting eudev-3.2.5
[    3.325886] random: udevd: uninitialized urandom read (16 bytes read,

29 bits of entropy available)

Quoted 2 lines
[    3.346155] random: udevd: uninitialized urandom read (16 bytes read,

29 bits of entropy available)

Quoted 4 lines
[    4.820708] EXT4-fs (mmcblk0p3): re-mounted. Opts: data=ordered
[    5.548283] random: dd: uninitialized urandom read (512 bytes read,

43 bits of entropy available)

Quoted 4 lines

INIT: Entering runlevel: 5

Configuring network interfaces... [ 5.820546] net eth0: initializing

cpsw version 1.12 (0)

Quoted 10 lines
[    5.825987] net eth0: initialized cpsw ale version 1.4
[    5.831150] net eth0: ALE Table size 1024
[    5.838581] net eth0: phy found : id is : 0x7c0f1
[    5.851838] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
[    9.896392] cpsw 4a100000.ethernet eth0: Link is Up - 100Mbps/Full -

flow control rx/tx

Quoted 17 lines
[    9.904635] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready

chown: unrecognized option '--reference=/etc/resolv.conf'

BusyBox v1.27.2 (2018-11-05 21:16:09 UTC) multi-call binary.

Usage: chown [-Rh]... USER[:[GRP]] FILE...

chmod: unrecognized option '--reference=/etc/resolv.conf'

BusyBox v1.27.2 (2018-11-05 21:16:09 UTC) multi-call binary.

Quoted 5 lines

Usage: chmod [-R] MODE[,MODE]... FILE...

done.

Starting system message bus: [ 14.887099] random: dbus-daemon:

uninitialized urandom read (12 bytes read, 62 bits of entropy available)

Quoted 2 lines
[   14.912318] random: dbus-daemon: uninitialized urandom read (12 bytes

read, 62 bits of entropy available)

Quoted 6 lines

dbus.

Starting OpenBSD Secure Shell server: sshd

[   15.393971] random: sshd: uninitialized urandom read (32 bytes read,

65 bits of entropy available)

Quoted 96 lines

done.

Starting Xserver

Starting DHCP server:

.

starting DNS forwarder and DHCP server: dnsmasq...

X.Org X Server 1.19.6

Release Date: 2017-12-20

X Protocol Version 11, Revision 0

Build Operating System: Linux 4.15.0-38-generic x86_64

Current Operating System: Linux polycaptil-machine-am335x-evmsk 4.4.19-ge581bb1cac #1 PREEMPT Thu May 24 11:42:17 CEST 2018 armv7l

Kernel command line: console=ttyO0,115200 root=/dev/mmcblk0p3 rw

Build Date: 05 November 2018 09:33:21PM

Current version of pixman: 0.34.0

Before reporting problems, check http://wiki.x.org

to make sure that you have the latest version.

Markers: (--) probed, (**) from config file, (==) default setting,

(++) from command line, (!!) notice, (II) informational,

(WW) warning, (EE) error, (NI) not implemented, (??) unknown.

(==) Log file: "/var/log/Xorg.0.log", Time: Fri Feb 1 20:08:02 2019

(==) Using config file: "/etc/X11/xorg.conf"

(==) Using system config directory "/usr/share/X11/xorg.conf.d"

done.

Starting HOSTAP Daemon: Configuration file: /etc/hostapd.conf

nl80211: 'nl80211' generic netlink not found

Failed to initialize driver 'nl80211'

wlan0: interface state UNINITIALIZED->DISABLED

wlan0: AP-DISABLED

hostapd_free_hapd_data: Interface wlan0 wasn't started

Starting ntpd: done

Starting syslogd/klogd: done

Starting crond: OK

Poky (Yocto Project Reference Distro) 2.5
polycaptil-machine-am335x-evmsk /dev/ttyS0

polycaptil-machine-am335x-evmsk login: D-BUS per-session daemon address is:
unix:abstract=/tmp/dbus-07WuJSySeb,guid=a3e41f2692316c19766e95535c54a7 25

Size 1024x768 not found in available modes

Error: No calibratable devices found.

matchbox: Cant find a keycode for keysym 269025056

matchbox: ignoring key shortcut XF86Calendar=!$contacts

matchbox: Cant find a keycode for keysym 2809

matchbox: ignoring key shortcut telephone=!$dates

matchbox: Cant find a keycode for keysym 269025050

Quoted 8 lines

matchbox: ignoring key shortcut XF86Start=!matchbox-remote -desktop

dbus-daemon[358]: Activating service name='org.a11y.atspi.Registry' requested by ':1.0' (uid=0 pid=354 comm="matchbox-terminal ")

dbus-daemon[358]: Successfully activated service

'org.a11y.atspi.Registry'

Quoted 22 lines

SpiRegistry daemon is running with well-known name - org.a11y.atspi.Registry

[   30.662697] random: nonblocking pool is initialized

Poky (Yocto Project Reference Distro) 2.5
polycaptil-machine-am335x-evmsk /dev/ttyS0

Thank’s to take time to read my message.

N.Stanisavljevic

--
_______________________________________________
yocto mailing list
[email protected]
https://lists.yoctoproject.org/listinfo/yocto

#4 lore raw

Hello Nikola,

Let us try to cut to the chase!

After reading what Marc Ferland says/writes, and looking into the following:
https://bugzilla.redhat.com/show_bug.cgi?id=1650634

I have spotted the following:
*Pat Riehecky ** 2018-11-20 14:28:22 UTC *

*the bug remains with the elrepo kernels:kernel-ml-4.19.2-1.el7.elrepo.x86_64kernel-lt-4.4.163-1.el7.elrepo.x86_64*

I never had this problem since I do not use Xorg (GFX), rather I only use serial console from VBox VM from my BBB (pass-through).

Thus, my suggestion for you, to skip the whole mess is to rebuild your distro *in the light of YOCTO Project 2.6.1 (thud 20.0.0.1).*

My best guess (then you'll inherit YOCTO kernel 4.20.x with fixed Xorg - X11).

I am using Fedora 29 on my laptop. Also from the bugzilla:
*Pat Riehecky ** 2018-11-20 15:46:11 UTC *

*Bug resolved by rebuilding xorg-x11-server-1.20.3-1.fc29 [1] for 7.6.* *With this in mind it appears to be an Xorg server bug rather than fbdev.*

From my HP EliteBook 840 G1 Fedora 29, Xorg.0.log - February 5th, 2019., I have the following:

[    26.955] Kernel command line: BOOT_IMAGE=/

*vmlinuz-4.20.6-200.fc29.x86_64*
root=/dev/mapper/fedora-root ro rd.lvm.lv=fedora/root rd.lvm.lv=fedora/swap rhgb
quiet LANG=en_US.UTF-8

[    26.955] Build Date: 11 January 2019  12:47:38PM
*[    26.955] Build ID: xorg-x11-se**rver 1.20.3-3.fc29*
[    26.955] Current version of pixman: 0.34.0

Best Regards,
Zoran
_______

Quoted 10 lines · Zoran Stojsavljevic

Hello Nikola,

Quoted 5 lines

I created a kernel recipe with a bbappend file, and, I added the same defconfig that I used for krogoth version. The bbappend for kernel recipe concern meta-ti layer. I didn't edited defconfig file in other layers which contain a kernel recipe.

It could be some problem that Sumo does not take your bbappend file into

the

Quoted 5 lines

consideration as placed.

It could be something else, as well.

I have the same issue with my defconfig file for my Thud Beagle Bone

Black (BBB)

Quoted 1 line

standard board. Every time I recompile my YOCTO for it for different

releases, I need

Quoted 1 line

to import my specific defconfig. But I use complete different repos for

my standard

Quoted 11 lines

Beagle Bone Black than YOCTO BBB Poky reference distro.

Here is what I use in Thud (my bblayers.conf):

POKY_BBLAYERS_CONF_VERSION = "2"
BBPATH = "${TOPDIR}"
BBFILES ?= ""

BBLAYERS ?= " \
    /home/user/projects2/beaglebone-black/yocto-thud/meta-bbb \

/home/user/projects2/beaglebone-black/yocto-thud/meta-openembedded/meta-networking \

Quoted 1 line

/home/user/projects2/beaglebone-black/yocto-thud/meta-openembedded/meta-oe \

Quoted 1 line

/home/user/projects2/beaglebone-black/yocto-thud/meta-openembedded/meta-python \

Quoted 5 lines
    /home/user/projects2/beaglebone-black/yocto-thud/meta-qt5 \
    /home/user/projects2/beaglebone-black/yocto-thud/poky/meta \
    /home/user/projects2/beaglebone-black/yocto-thud/poky/meta-poky"

There, I replace defconfig in this layer:

/home/user/projects2/beaglebone-black/yocto-thud/meta-bbb

Quoted 4 lines

with my own defconfig.

In the directory:

/home/user/projects2/beaglebone-black/yocto-thud/meta-bbb/recipes-kernel/linux/linux-stable-4.19/beaglebone

Quoted 2 lines

If you use only Poky repository, then you need to read the following

paragraph (how to use

Quoted 4 lines

your defconfig with Poky):

[2.3.3. Changing the Configuration] YOCTO Project Linux Development Manual

https://www.yoctoproject.org/docs/2.5/kernel-dev/kernel-dev.html#using-an-in-tree-defconfig-file

Quoted 9 lines

2.3.3. Changing the Configuration

I hope this will help. Please, keep us posted!

Zoran
_______

On Tue, Feb 5, 2019 at 10:54 AM Stanisavljevic <

Quoted 6 lines · [email protected]> wrote:
Quoted 6 lines

Hy Zoran

Thank's to take time to answer

I created a kernel recipe with a bbappend file, and, I added the same

defconfig that I used for krogoth version.

Quoted 2 lines
Quoted 2 lines

The bbappend for kernel recipe concern meta-ti layer.
I didn't edited defconfig file in other layers which contain a kernel

recipe.

Quoted 2 lines
Quoted 2 lines

I think it's a problem which concern the screen resolution, screen

frequency and adc touchscreen.

Quoted 1 line
Quoted 1 line

Something is different between the krogoth and sumo version, but I

didn't find what is changed...

Quoted 4 lines
Quoted 4 lines

Xrandr show that problem is maybe around the screen resolution. It's show the next message : "Size 1024x768 not found in available modes" Maybe it was changed between krogoth and sumo version...but I don't know

where it is indicated if sources files...

Quoted 2 lines
Quoted 2 lines

What do you think ? problem can be around the screen resolution, screen

frequency and adc touchscreen ?

Quoted 11 lines
Quoted 11 lines

Nikola

-----Message d'origine-----
De : Zoran Stojsavljevic <[email protected]> Envoyé : lundi 4 février 2019 17:08
À : Stanisavljevic <[email protected]> Cc : Yocto Project <[email protected]> Objet : Re: [yocto] yocto touchscreen

Quoted 1 line

I built a first version of this os with version krogoth and it works

fine.

Quoted 13 lines
Quoted 13 lines
Quoted 4 lines

Now I build a second version of this os with version sumo and the touch screen works fine during boot process but when kernel is loaded, touchscreen freeze / lock and impossible to use it.

Did you compare Krogoth kernel defconfig with Sumo kernel defconfig?

May there are some mismatches in drivers' setup between these two?

Zoran
_______

On Mon, Feb 4, 2019 at 12:24 PM Stanisavljevic <

Quoted 9 lines · [email protected]> wrote:
Quoted 9 lines
Quoted 9 lines

Hy Team,

I have a problem

Quoted 5 lines
Quoted 5 lines
Quoted 5 lines

I buid a custom os for AM335x processor and I used yocto to do it.

I build a first version of this os with version krogoth and it work

fine.

Quoted 4 lines
Quoted 4 lines
Quoted 4 lines

Now I build a second version of this os with version sumo and the

touchscreen work fine during boot process but when kernel is loaded, touchscreen freeze / lock and impossible to use it.

Quoted 2 lines
Quoted 2 lines
Quoted 2 lines

The terminal is printed on the touchscreen but the screen is locked,

impossible to write a command or to move the mouse to select, ….

Quoted 4 lines
Quoted 4 lines
Quoted 4 lines

Here is the log of boot to the user session (log got with serial

communication between PC and board) :

Quoted 73 lines
Quoted 73 lines
Quoted 73 lines

U-Boot SPL 2017.05-00001-g041a398 (May 02 2018 - 18:36:57)

Trying to boot from MMC1

reading uboot.env

reading u-boot.img

reading u-boot.img

reading u-boot.img

reading u-boot.img

U-Boot 2017.05-00001-g041a398 (May 02 2018 - 18:36:57 +0200)

CPU : AM335X-GP rev 2.1

Model: TI AM335x EVM-SK

DRAM: 256 MiB

NAND: 0 MiB

MMC: OMAP SD/MMC: 0, OMAP SD/MMC: 1

reading uboot.env

ERROR: No USB device found

at drivers/usb/gadget/ether.c:2709/usb_ether_init()

Net: CACHE: Misaligned operation at range [8df323c0, 8df32464]

Warning: ethernet@4a100000 using MAC address from ROM

eth0: ethernet@4a100000

Hit any key to stop autoboot: 0

reading zImage

3412752 bytes read in 251 ms (13 MiB/s)

reading dtb

39733 bytes read in 12 ms (3.2 MiB/s)

## Flattened Device Tree blob at 82000000

Booting using the fdt blob at 0x82000000

Loading Device Tree to 8df19000, end 8df25b34 ... OK

Starting kernel ...

Quoted 7 lines
Quoted 7 lines
Quoted 7 lines
[    0.000000] Booting Linux on physical CPU 0x0
[    0.000000] Initializing cgroup subsys cpu
[    0.000000] Initializing cgroup subsys cpuacct
[    0.000000] Linux version 4.4.19-ge581bb1cac

(polycaptil@polycaptil-HP-Notebook) (gcc version 5.3.0 (GCC) ) #1 PREEMPT Thu May 24 11:42:17 CEST 2018

Quoted 2 lines
Quoted 2 lines
Quoted 2 lines
[    0.000000] CPU: ARMv7 Processor [413fc082] revision 2 (ARMv7),

cr=10c5387d

Quoted 2 lines
Quoted 2 lines
Quoted 2 lines
[    0.000000] CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing

instruction cache

Quoted 5 lines
Quoted 5 lines
Quoted 5 lines
[    0.000000] Machine model: TI AM335x EVM-SK
[    0.000000] cma: Reserved 48 MiB at 0x8a800000
Quoted 7 lines
Quoted 7 lines
Quoted 7 lines
[    0.000000] Memory policy: Data cache writeback
[    0.000000] CPU: All CPU(s) started in SVC mode.
[    0.000000] AM335X ES2.1 (sgx neon )
[    0.000000] Built 1 zonelists in Zone order, mobility grouping on.

Total pages: 64960

Quoted 2 lines
Quoted 2 lines
Quoted 2 lines
[    0.000000] Kernel command line: console=ttyO0,115200

root=/dev/mmcblk0p3 rw

Quoted 4 lines
Quoted 4 lines
Quoted 4 lines
[    0.000000] PID hash table entries: 1024 (order: 0, 4096 bytes)
[    0.000000] Dentry cache hash table entries: 32768 (order: 5,

131072 bytes)

Quoted 2 lines
Quoted 2 lines
Quoted 2 lines
[    0.000000] Inode-cache hash table entries: 16384 (order: 4, 65536

bytes)

Quoted 2 lines
Quoted 2 lines
Quoted 2 lines
[    0.000000] Memory: 200444K/262144K available (6495K kernel code,

313K rwdata, 2368K rodata, 260K init, 265K bss, 12548K reserved, 49152K cma-reserved, 0K highmem)

Quoted 17 lines
Quoted 17 lines
Quoted 17 lines
[    0.000000] Virtual kernel memory layout:
[    0.000000]     vector  : 0xffff0000 - 0xffff1000   (   4 kB)
[    0.000000]     fixmap  : 0xffc00000 - 0xfff00000   (3072 kB)
[    0.000000]     vmalloc : 0xd0800000 - 0xff800000   ( 752 MB)
[    0.000000]     lowmem  : 0xc0000000 - 0xd0000000   ( 256 MB)
[    0.000000]     pkmap   : 0xbfe00000 - 0xc0000000   (   2 MB)
[    0.000000]     modules : 0xbf000000 - 0xbfe00000   (  14 MB)
[    0.000000]       .text : 0xc0008000 - 0xc08b0034   (8865 kB)
Quoted 7 lines
Quoted 7 lines
Quoted 7 lines
[    0.000000]       .init : 0xc08b1000 - 0xc08f2000   ( 260 kB)
[    0.000000]       .data : 0xc08f2000 - 0xc09407f0   ( 314 kB)
[    0.000000]        .bss : 0xc09407f0 - 0xc0982d58   ( 266 kB)
[    0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=1,

Nodes=1

Quoted 8 lines
Quoted 8 lines
Quoted 8 lines
[    0.000000] Preemptible hierarchical RCU implementation.
[    0.000000]  Build-time adjustment of leaf fanout to 32.
[    0.000000] NR_IRQS:16 nr_irqs:16 16
[    0.000000] IRQ: Found an INTC at 0xfa200000 (revision 5.0) with

128 interrupts

Quoted 4 lines
Quoted 4 lines
Quoted 4 lines
[    0.000000] OMAP clockevent source: timer2 at 24000000 Hz
[    0.000015] sched_clock: 32 bits at 24MHz, resolution 41ns, wraps

every 89478484971ns

Quoted 2 lines
Quoted 2 lines
Quoted 2 lines
[    0.000036] clocksource: timer1: mask: 0xffffffff max_cycles:

0xffffffff, max_idle_ns: 79635851949 ns

Quoted 8 lines
Quoted 8 lines
Quoted 8 lines
[    0.000047] OMAP clocksource: timer1 at 24000000 Hz
[    0.000222] clocksource_probe: no matching clocksources found
[    0.000415] Console: colour dummy device 80x30
[    0.000442] WARNING: Your 'console=ttyO0' has been replaced by

'ttyS0'

Quoted 10 lines
Quoted 10 lines
Quoted 10 lines
[    0.000448] This ensures that you still see kernel messages. Please
[    0.000454] update your kernel commandline.
[    0.000473] Calibrating delay loop... 795.44 BogoMIPS (lpj=3977216)
[    0.089064] pid_max: default: 32768 minimum: 301
[    0.089193] Mount-cache hash table entries: 1024 (order: 0, 4096

bytes)

Quoted 2 lines
Quoted 2 lines
Quoted 2 lines
[    0.089205] Mountpoint-cache hash table entries: 1024 (order: 0,

4096 bytes)

Quoted 9 lines
Quoted 9 lines
Quoted 9 lines
[    0.089932] Initializing cgroup subsys io
[    0.089964] Initializing cgroup subsys memory
[    0.090005] Initializing cgroup subsys devices
[    0.090021] Initializing cgroup subsys freezer
Quoted 7 lines
Quoted 7 lines
Quoted 7 lines
[    0.090036] Initializing cgroup subsys perf_event
[    0.090048] Initializing cgroup subsys pids
[    0.090078] CPU: Testing write buffer coherency: ok
[    0.090499] Setting up static identity map for 0x80008200 -

0x80008258

Quoted 4 lines
Quoted 4 lines
Quoted 4 lines
[    0.092680] devtmpfs: initialized
[    0.105440] VFP support v0.3: implementor 41 architecture 3 part 30

variant c rev 3

Quoted 4 lines
Quoted 4 lines
Quoted 4 lines
[    0.120529] omap_hwmod: debugss: _wait_target_disable failed
[    0.175584] clocksource: jiffies: mask: 0xffffffff max_cycles:

0xffffffff, max_idle_ns: 19112604462750000 ns

Quoted 6 lines
Quoted 6 lines
Quoted 6 lines
[    0.179852] pinctrl core: initialized pinctrl subsystem
[    0.181216] NET: Registered protocol family 16
[    0.183420] DMA: preallocated 256 KiB pool for atomic coherent

allocations

Quoted 5 lines
Quoted 5 lines
Quoted 5 lines
[    0.209061] cpuidle: using governor ladder
[    0.239048] cpuidle: using governor menu
Quoted 7 lines
Quoted 7 lines
Quoted 7 lines
[    0.243661] OMAP GPIO hardware version 0.1
[    0.254360] hw-breakpoint: debug architecture 0x4 unsupported.
[    0.297629] edma 49000000.edma: TI EDMA DMA engine driver
[    0.298606] reg-fixed-voltage fixedregulator@2: could not find

pctldev for node /ocp/l4_wkup@44c00000/scm@210000/pinmux@800/pinmux_wl12xx_gpio, deferring probe

Quoted 2 lines
Quoted 2 lines
Quoted 2 lines
[    0.302364] omap_i2c 44e0b000.i2c: could not find pctldev for node

/ocp/l4_wkup@44c00000/scm@210000/pinmux@800/pinmux_i2c0_pins, deferring probe

Quoted 8 lines
Quoted 8 lines
Quoted 8 lines
[    0.302525] media: Linux media interface: v0.10
[    0.302588] Linux video capture interface: v2.00
[    0.302638] pps_core: LinuxPPS API ver. 1 registered
[    0.302646] pps_core: Software ver. 5.3.6 - Copyright 2005-2007

Rodolfo Giometti <[email protected]>

Quoted 7 lines
Quoted 7 lines
Quoted 7 lines
[    0.302676] PTP clock support registered
[    0.302741] EDAC MC: Ver: 3.0.0
[    0.303966] omap-mailbox 480c8000.mailbox: omap mailbox rev 0x400
Quoted 7 lines
Quoted 7 lines
Quoted 7 lines
[    0.304332] Advanced Linux Sound Architecture Driver Initialized.
[    0.305512] clocksource: Switched to clocksource timer1
[    0.316775] NET: Registered protocol family 2
[    0.317599] TCP established hash table entries: 2048 (order: 1,

8192 bytes)

Quoted 11 lines
Quoted 11 lines
Quoted 11 lines
[    0.317636] TCP bind hash table entries: 2048 (order: 1, 8192 bytes)
[    0.317663] TCP: Hash tables configured (established 2048 bind 2048)
[    0.317748] UDP hash table entries: 256 (order: 0, 4096 bytes)
[    0.317767] UDP-Lite hash table entries: 256 (order: 0, 4096 bytes)
[    0.317925] NET: Registered protocol family 1
Quoted 7 lines
Quoted 7 lines
Quoted 7 lines
[    0.318352] RPC: Registered named UNIX socket transport module.
[    0.318366] RPC: Registered udp transport module.
[    0.318372] RPC: Registered tcp transport module.
[    0.318379] RPC: Registered tcp NFSv4.1 backchannel transport

module.

Quoted 2 lines
Quoted 2 lines
Quoted 2 lines
[    0.319330] hw perfevents: enabled with armv7_cortex_a8 PMU driver,

5 counters available

Quoted 7 lines
Quoted 7 lines
Quoted 7 lines
[    0.321392] futex hash table entries: 256 (order: -1, 3072 bytes)
[    0.329780] squashfs: version 4.0 (2009/01/31) Phillip Lougher
[    0.330717] NFS: Registering the id_resolver key type
Quoted 7 lines
Quoted 7 lines
Quoted 7 lines
[    0.330798] Key type id_resolver registered
[    0.330807] Key type id_legacy registered
[    0.330886] ntfs: driver 2.1.32 [Flags: R/O].
[    0.334673] Block layer SCSI generic (bsg) driver version 0.4

loaded (major 248)

Quoted 8 lines
Quoted 8 lines
Quoted 8 lines
[    0.334706] io scheduler noop registered
[    0.334719] io scheduler deadline registered
[    0.334877] io scheduler cfq registered (default)
[    0.336555] pinctrl-single 44e10800.pinmux: 142 pins at pa f9e10800

size 568

Quoted 4 lines
Quoted 4 lines
Quoted 4 lines
[    0.339415] backlight supply power not found, using dummy regulator
[    0.402480] Serial: 8250/16550 driver, 10 ports, IRQ sharing

disabled

Quoted 2 lines
Quoted 2 lines
Quoted 2 lines
[    0.406962] 44e09000.serial: ttyS0 at MMIO 0x44e09000 (irq = 158,

base_baud = 3000000) is a 8250

Quoted 4 lines
Quoted 4 lines
Quoted 4 lines
[    1.017357] console [ttyS0] enabled
[    1.022206] 48022000.serial: ttyS1 at MMIO 0x48022000 (irq = 159,

base_baud = 3000000) is a 8250

Quoted 4 lines
Quoted 4 lines
Quoted 4 lines
[    1.032273] [drm] Initialized drm 1.1.0 20060810
[    1.039564] [drm] Supports vblank timestamp caching Rev 2

(21.10.2013).

Quoted 13 lines
Quoted 13 lines
Quoted 13 lines
[    1.046349] [drm] No driver support for vblank timestamp query.
[    1.062121] Console: switching to colour frame buffer device 60x34
[    1.070360] tilcdc 4830e000.lcdc: fb0:  frame buffer device
[    1.105531] [drm] Initialized tilcdc 1.0.0 20121205 on minor 0
[    1.118644] loop: module loaded
[    1.124253] libphy: Fixed MDIO Bus: probed
Quoted 7 lines
Quoted 7 lines
Quoted 7 lines
[    1.185550] davinci_mdio 4a101000.mdio: davinci mdio revision 1.6
[    1.191695] davinci_mdio 4a101000.mdio: detected phy mask fffffffe
[    1.198786] libphy: 4a101000.mdio: probed
[    1.202886] davinci_mdio 4a101000.mdio: phy[0]: device

4a101000.mdio:00, driver SMSC LAN8710/LAN8720

Quoted 2 lines
Quoted 2 lines
Quoted 2 lines
[    1.212890] cpsw 4a100000.ethernet: Detected MACID =

a0:f6:fd:4c:a6:ba

Quoted 2 lines
Quoted 2 lines
Quoted 2 lines
[    1.220531] cpsw 4a100000.ethernet: cpsw: Detected MACID =

c4:ed:ba:88:2a:92

Quoted 6 lines
Quoted 6 lines
Quoted 6 lines
[    1.229382] mousedev: PS/2 mouse device common for all mice
[    1.235845] i2c /dev entries driver
[    1.240508] cpuidle: enable-method property 'ti,am3352' found

operations

Quoted 4 lines
Quoted 4 lines
Quoted 4 lines
[    1.248197] omap_hsmmc 48060000.mmc: Got CD GPIO
[    1.275713] pinctrl-single 44e10800.pinmux: bad data for mux

pinmux_mmc2_pins

Quoted 2 lines
Quoted 2 lines
Quoted 2 lines
[    1.282895] pinctrl-single 44e10800.pinmux: no pins entries for

pinmux_mmc2_pins

Quoted 7 lines
Quoted 7 lines
Quoted 7 lines
[    1.317159] ledtrig-cpu: registered to indicate activity on CPUs
[    1.326069] NET: Registered protocol family 10
[    1.332092] sit: IPv6 over IPv4 tunneling driver
Quoted 7 lines
Quoted 7 lines
Quoted 7 lines
[    1.337715] NET: Registered protocol family 17
[    1.342510] Key type dns_resolver registered
[    1.347095] omap_voltage_late_init: Voltage driver support not added
[    1.407145] tps65910-rtc tps65910-rtc: rtc core: registered

tps65910-rtc as rtc0

Quoted 8 lines
Quoted 8 lines
Quoted 8 lines
[    1.415278] omap_i2c 44e0b000.i2c: bus 0 rev0.11 at 400 kHz
[    1.421665] omap_hsmmc 48060000.mmc: Got CD GPIO
[    1.426813] vmmc: supplied by vbat
[    1.466341] pinctrl-single 44e10800.pinmux: bad data for mux

pinmux_mmc2_pins

Quoted 2 lines
Quoted 2 lines
Quoted 2 lines
[    1.474737] pinctrl-single 44e10800.pinmux: no pins entries for

pinmux_mmc2_pins

Quoted 2 lines
Quoted 2 lines
Quoted 2 lines
[    1.513247] mmc0: host does not support reading read-only switch,

assuming write-enable

Quoted 10 lines
Quoted 10 lines
Quoted 10 lines
[    1.523414] mmc0: new high speed SDHC card at address 0001
[    1.529635] mmcblk0: mmc0:0001 AS 3.72 GiB
[    1.535996]  mmcblk0: p1 p2 p3
[    1.595932] vdd_mpu: supplied by vbat
[    1.602167] input: gpio_buttons@0 as

/devices/platform/gpio_buttons@0/input/input0

Quoted 2 lines
Quoted 2 lines
Quoted 2 lines
[    1.618291] tps65910-rtc tps65910-rtc: setting system clock to
2019-02-01 20:07:49 UTC (1549051669)
Quoted 8 lines
Quoted 8 lines
Quoted 8 lines
[    1.639394] lis3_reg: disabling
[    1.655732] ALSA device list:
[    1.658720]   No soundcards found.
[    1.678290] EXT4-fs (mmcblk0p3): couldn't mount as ext3 due to

feature incompatibilities

Quoted 2 lines
Quoted 2 lines
Quoted 2 lines
[    1.696920] EXT4-fs (mmcblk0p3): couldn't mount as ext2 due to

feature incompatibilities

Quoted 4 lines
Quoted 4 lines
Quoted 4 lines
[    2.183999] EXT4-fs (mmcblk0p3): recovery complete
[    2.196864] EXT4-fs (mmcblk0p3): mounted filesystem with ordered

data mode. Opts: (null)

Quoted 8 lines
Quoted 8 lines
Quoted 8 lines
[    2.205084] VFS: Mounted root (ext4 filesystem) on device 179:3.
[    2.225670] devtmpfs: mounted
[    2.235781] Freeing unused kernel memory: 260K (c08b1000 - c08f2000)
[    2.242162] This architecture does not have kernel memory

protection.

Quoted 8 lines
Quoted 8 lines
Quoted 8 lines

INIT: version 2.88 booting

Starting udev

[    3.090091] udevd[78]: starting version 3.2.5
[    3.106175] random: udevd: uninitialized urandom read (16 bytes

read, 26 bits of entropy available)

Quoted 2 lines
Quoted 2 lines
Quoted 2 lines
[    3.118667] random: udevd: uninitialized urandom read (16 bytes

read, 26 bits of entropy available)

Quoted 2 lines
Quoted 2 lines
Quoted 2 lines
[    3.128014] random: udevd: uninitialized urandom read (16 bytes

read, 26 bits of entropy available)

Quoted 2 lines
Quoted 2 lines
Quoted 2 lines
[    3.137335] random: udevd: uninitialized urandom read (16 bytes

read, 26 bits of entropy available)

Quoted 4 lines
Quoted 4 lines
Quoted 4 lines
[    3.218433] udevd[79]: starting eudev-3.2.5
[    3.325886] random: udevd: uninitialized urandom read (16 bytes

read, 29 bits of entropy available)

Quoted 2 lines
Quoted 2 lines
Quoted 2 lines
[    3.346155] random: udevd: uninitialized urandom read (16 bytes

read, 29 bits of entropy available)

Quoted 4 lines
Quoted 4 lines
Quoted 4 lines
[    4.820708] EXT4-fs (mmcblk0p3): re-mounted. Opts: data=ordered
[    5.548283] random: dd: uninitialized urandom read (512 bytes read,

43 bits of entropy available)

Quoted 4 lines
Quoted 4 lines
Quoted 4 lines

INIT: Entering runlevel: 5

Configuring network interfaces... [ 5.820546] net eth0:

initializing cpsw version 1.12 (0)

Quoted 10 lines
Quoted 10 lines
Quoted 10 lines
[    5.825987] net eth0: initialized cpsw ale version 1.4
[    5.831150] net eth0: ALE Table size 1024
[    5.838581] net eth0: phy found : id is : 0x7c0f1
[    5.851838] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
[    9.896392] cpsw 4a100000.ethernet eth0: Link is Up - 100Mbps/Full

- flow control rx/tx

Quoted 17 lines
Quoted 17 lines
Quoted 17 lines
[    9.904635] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready

chown: unrecognized option '--reference=/etc/resolv.conf'

BusyBox v1.27.2 (2018-11-05 21:16:09 UTC) multi-call binary.

Usage: chown [-Rh]... USER[:[GRP]] FILE...

chmod: unrecognized option '--reference=/etc/resolv.conf'

BusyBox v1.27.2 (2018-11-05 21:16:09 UTC) multi-call binary.

Quoted 5 lines
Quoted 5 lines
Quoted 5 lines

Usage: chmod [-R] MODE[,MODE]... FILE...

done.

Starting system message bus: [ 14.887099] random: dbus-daemon:

uninitialized urandom read (12 bytes read, 62 bits of entropy available)

Quoted 2 lines
Quoted 2 lines
Quoted 2 lines
[   14.912318] random: dbus-daemon: uninitialized urandom read (12

bytes read, 62 bits of entropy available)

Quoted 6 lines
Quoted 6 lines
Quoted 6 lines

dbus.

Starting OpenBSD Secure Shell server: sshd

[   15.393971] random: sshd: uninitialized urandom read (32 bytes

read, 65 bits of entropy available)

Quoted 96 lines
Quoted 96 lines
Quoted 96 lines

done.

Starting Xserver

Starting DHCP server:

.

starting DNS forwarder and DHCP server: dnsmasq...

X.Org X Server 1.19.6

Release Date: 2017-12-20

X Protocol Version 11, Revision 0

Build Operating System: Linux 4.15.0-38-generic x86_64

Current Operating System: Linux polycaptil-machine-am335x-evmsk 4.4.19-ge581bb1cac #1 PREEMPT Thu May 24 11:42:17 CEST 2018 armv7l

Kernel command line: console=ttyO0,115200 root=/dev/mmcblk0p3 rw

Build Date: 05 November 2018 09:33:21PM

Current version of pixman: 0.34.0

Before reporting problems, check http://wiki.x.org

to make sure that you have the latest version.

Markers: (--) probed, (**) from config file, (==) default setting,

(++) from command line, (!!) notice, (II) informational,

(WW) warning, (EE) error, (NI) not implemented, (??) unknown.

(==) Log file: "/var/log/Xorg.0.log", Time: Fri Feb 1 20:08:02 2019

(==) Using config file: "/etc/X11/xorg.conf"

(==) Using system config directory "/usr/share/X11/xorg.conf.d"

done.

Starting HOSTAP Daemon: Configuration file: /etc/hostapd.conf

nl80211: 'nl80211' generic netlink not found

Failed to initialize driver 'nl80211'

wlan0: interface state UNINITIALIZED->DISABLED

wlan0: AP-DISABLED

hostapd_free_hapd_data: Interface wlan0 wasn't started

Starting ntpd: done

Starting syslogd/klogd: done

Starting crond: OK

Poky (Yocto Project Reference Distro) 2.5
polycaptil-machine-am335x-evmsk /dev/ttyS0

polycaptil-machine-am335x-evmsk login: D-BUS per-session daemon address is:
unix:abstract=/tmp/dbus-07WuJSySeb,guid=a3e41f2692316c19766e95535c54a7 25

Size 1024x768 not found in available modes

Error: No calibratable devices found.

matchbox: Cant find a keycode for keysym 269025056

matchbox: ignoring key shortcut XF86Calendar=!$contacts

matchbox: Cant find a keycode for keysym 2809

matchbox: ignoring key shortcut telephone=!$dates

matchbox: Cant find a keycode for keysym 269025050

Quoted 8 lines
Quoted 8 lines
Quoted 8 lines

matchbox: ignoring key shortcut XF86Start=!matchbox-remote -desktop

dbus-daemon[358]: Activating service name='org.a11y.atspi.Registry' requested by ':1.0' (uid=0 pid=354 comm="matchbox-terminal ")

dbus-daemon[358]: Successfully activated service

'org.a11y.atspi.Registry'

Quoted 23 lines
Quoted 23 lines
Quoted 22 lines

SpiRegistry daemon is running with well-known name - org.a11y.atspi.Registry

[   30.662697] random: nonblocking pool is initialized

Poky (Yocto Project Reference Distro) 2.5
polycaptil-machine-am335x-evmsk /dev/ttyS0

Thank’s to take time to read my message.

N.Stanisavljevic

--
_______________________________________________
yocto mailing list
[email protected]
https://lists.yoctoproject.org/listinfo/yocto

#5 lore raw

Thank you Zoran for trying to help me.
I tried to resolve the problem, but I didn’t succeed yet, I think I will to continue, and If after some time I find nothing, I’m going to migrate to the thud version.

I will maybe try to use Bugzilla

Nikola

De : Zoran Stojsavljevic <[email protected]> Envoyé : mardi 5 février 2019 19:28
À : Stanisavljevic <[email protected]>
Cc : Yocto Project <[email protected]>; [email protected] Objet : Re: [yocto] yocto touchscreen

Hello Nikola,

Let us try to cut to the chase!

After reading what Marc Ferland says/writes, and looking into the following:
https://bugzilla.redhat.com/show_bug.cgi?id=1650634

I have spotted the following:

Pat Riehecky 2018-11-20 14:28:22 UTC

the bug remains with the elrepo kernels:
kernel-ml-4.19.2-1.el7.elrepo.x86_64
kernel-lt-4.4.163-1.el7.elrepo.x86_64

I never had this problem since I do not use Xorg (GFX), rather I only

use serial console from VBox VM from my BBB (pass-through).

Thus, my suggestion for you, to skip the whole mess is to rebuild your

distro in the light of YOCTO Project 2.6.1 (thud 20.0.0.1).

My best guess (then you'll inherit YOCTO kernel 4.20.x with fixed Xorg - X11).

I am using Fedora 29 on my laptop. Also from the bugzilla:

Pat Riehecky 2018-11-20 15:46:11 UTC

Bug resolved by rebuilding xorg-x11-server-1.20.3-1.fc29 [1] for 7.6.

With this in mind it appears to be an Xorg server bug rather than fbdev.

From my HP EliteBook 840 G1 Fedora 29, Xorg.0.log - February 5th, 2019.,

I have the following:

[    26.955] Kernel command line: BOOT_IMAGE=/vmlinuz-4.20.6-200.fc29.x86_64

root=/dev/mapper/fedora-root ro rd.lvm.lv <http://rd.lvm.lv> =fedora/root rd.lvm.lv <http://rd.lvm.lv> =fedora/swap rhgb

quiet LANG=en_US.UTF-8

[    26.955] Build Date: 11 January 2019  12:47:38PM
[    26.955] Build ID: xorg-x11-server 1.20.3-3.fc29
[    26.955] Current version of pixman: 0.34.0

Best Regards,
Zoran
_______

Quoted 696 lines · On Tue, Feb 5, 2019 at 2:49 PM Zoran Stojsavljevic…

Hello Nikola,

Quoted 5 lines

I created a kernel recipe with a bbappend file, and, I added the same defconfig that I used for krogoth version. The bbappend for kernel recipe concern meta-ti layer. I didn't edited defconfig file in other layers which contain a kernel recipe.

It could be some problem that Sumo does not take your bbappend file into the consideration as placed.

It could be something else, as well.

I have the same issue with my defconfig file for my Thud Beagle Bone Black (BBB) standard board. Every time I recompile my YOCTO for it for different releases, I need to import my specific defconfig. But I use complete different repos for my standard Beagle Bone Black than YOCTO BBB Poky reference distro.

Here is what I use in Thud (my bblayers.conf):

POKY_BBLAYERS_CONF_VERSION = "2"
BBPATH = "${TOPDIR}"
BBFILES ?= ""

BBLAYERS ?= " \
    /home/user/projects2/beaglebone-black/yocto-thud/meta-bbb \
    /home/user/projects2/beaglebone-black/yocto-thud/meta-openembedded/meta-networking \
    /home/user/projects2/beaglebone-black/yocto-thud/meta-openembedded/meta-oe \
    /home/user/projects2/beaglebone-black/yocto-thud/meta-openembedded/meta-python \
    /home/user/projects2/beaglebone-black/yocto-thud/meta-qt5 \
    /home/user/projects2/beaglebone-black/yocto-thud/poky/meta \
    /home/user/projects2/beaglebone-black/yocto-thud/poky/meta-poky"

There, I replace defconfig in this layer: /home/user/projects2/beaglebone-black/yocto-thud/meta-bbb with my own defconfig.

In the directory:
/home/user/projects2/beaglebone-black/yocto-thud/meta-bbb/recipes-kernel/linux/linux-stable-4.19/beaglebone

If you use only Poky repository, then you need to read the following paragraph (how to use your defconfig with Poky):

[2.3.3. Changing the Configuration] YOCTO Project Linux Development Manual
https://www.yoctoproject.org/docs/2.5/kernel-dev/kernel-dev.html#using-an-in-tree-defconfig-file
2.3.3. Changing the Configuration

I hope this will help. Please, keep us posted!

Zoran
_______

Quoted 642 lines · On Tue, Feb 5, 2019 at 10:54 AM Stanisavljevic <[email protected]…

Hy Zoran

Thank's to take time to answer

I created a kernel recipe with a bbappend file, and, I added the same defconfig that I used for krogoth version. The bbappend for kernel recipe concern meta-ti layer.
I didn't edited defconfig file in other layers which contain a kernel recipe.

I think it's a problem which concern the screen resolution, screen frequency and adc touchscreen. Something is different between the krogoth and sumo version, but I didn't find what is changed...

Xrandr show that problem is maybe around the screen resolution.
It's show the next message : "Size 1024x768 not found in available modes"
Maybe it was changed between krogoth and sumo version...but I don't know where it is indicated if sources files...

What do you think ? problem can be around the screen resolution, screen frequency and adc touchscreen ?

Nikola

-----Message d'origine-----
De : Zoran Stojsavljevic <[email protected] <mailto:[email protected]> > Envoyé : lundi 4 février 2019 17:08
À : Stanisavljevic <[email protected] <mailto:[email protected]> > Cc : Yocto Project <[email protected] <mailto:[email protected]> > Objet : Re: [yocto] yocto touchscreen

Quoted 5 lines

I built a first version of this os with version krogoth and it works fine.

Now I build a second version of this os with version sumo and the touch screen works fine during boot process but when kernel is loaded, touchscreen freeze / lock and impossible to use it.

Did you compare Krogoth kernel defconfig with Sumo kernel defconfig?

May there are some mismatches in drivers' setup between these two?

Zoran
_______

Quoted 600 lines · On Mon, Feb 4, 2019 at 12:24 PM Stanisavljevic <[email protected]…

Hy Team,

I have a problem

I buid a custom os for AM335x processor and I used yocto to do it.

I build a first version of this os with version krogoth and it work fine.

Now I build a second version of this os with version sumo and the touchscreen work fine during boot process but when kernel is loaded, touchscreen freeze / lock and impossible to use it.

The terminal is printed on the touchscreen but the screen is locked, impossible to write a command or to move the mouse to select, ….

Here is the log of boot to the user session (log got with serial communication between PC and board) :

U-Boot SPL 2017.05-00001-g041a398 (May 02 2018 - 18:36:57)

Trying to boot from MMC1

reading uboot.env

reading u-boot.img

reading u-boot.img

reading u-boot.img

reading u-boot.img

U-Boot 2017.05-00001-g041a398 (May 02 2018 - 18:36:57 +0200)

CPU : AM335X-GP rev 2.1

Model: TI AM335x EVM-SK

DRAM: 256 MiB

NAND: 0 MiB

MMC: OMAP SD/MMC: 0, OMAP SD/MMC: 1

reading uboot.env

ERROR: No USB device found

at drivers/usb/gadget/ether.c:2709/usb_ether_init()

Net: CACHE: Misaligned operation at range [8df323c0, 8df32464]

Warning: ethernet@4a100000 using MAC address from ROM

eth0: ethernet@4a100000

Hit any key to stop autoboot: 0

reading zImage

3412752 bytes read in 251 ms (13 MiB/s)

reading dtb

39733 bytes read in 12 ms (3.2 MiB/s)

## Flattened Device Tree blob at 82000000

Booting using the fdt blob at 0x82000000

Loading Device Tree to 8df19000, end 8df25b34 ... OK

Starting kernel ...

[    0.000000] Booting Linux on physical CPU 0x0
[    0.000000] Initializing cgroup subsys cpu
[    0.000000] Initializing cgroup subsys cpuacct
[    0.000000] Linux version 4.4.19-ge581bb1cac (polycaptil@polycaptil-HP-Notebook) (gcc version 5.3.0 (GCC) ) #1 PREEMPT Thu May 24 11:42:17 CEST 2018
[    0.000000] CPU: ARMv7 Processor [413fc082] revision 2 (ARMv7), cr=10c5387d
[    0.000000] CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instruction cache
[    0.000000] Machine model: TI AM335x EVM-SK
[    0.000000] cma: Reserved 48 MiB at 0x8a800000
[    0.000000] Memory policy: Data cache writeback
[    0.000000] CPU: All CPU(s) started in SVC mode.
[    0.000000] AM335X ES2.1 (sgx neon )
[    0.000000] Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 64960
[    0.000000] Kernel command line: console=ttyO0,115200 root=/dev/mmcblk0p3 rw
[    0.000000] PID hash table entries: 1024 (order: 0, 4096 bytes)
[    0.000000] Dentry cache hash table entries: 32768 (order: 5, 131072 bytes)
[    0.000000] Inode-cache hash table entries: 16384 (order: 4, 65536 bytes)
[    0.000000] Memory: 200444K/262144K available (6495K kernel code, 313K rwdata, 2368K rodata, 260K init, 265K bss, 12548K reserved, 49152K cma-reserved, 0K highmem)
[    0.000000] Virtual kernel memory layout:
[    0.000000]     vector  : 0xffff0000 - 0xffff1000   (   4 kB)
[    0.000000]     fixmap  : 0xffc00000 - 0xfff00000   (3072 kB)
[    0.000000]     vmalloc : 0xd0800000 - 0xff800000   ( 752 MB)
[    0.000000]     lowmem  : 0xc0000000 - 0xd0000000   ( 256 MB)
[    0.000000]     pkmap   : 0xbfe00000 - 0xc0000000   (   2 MB)
[    0.000000]     modules : 0xbf000000 - 0xbfe00000   (  14 MB)
[    0.000000]       .text : 0xc0008000 - 0xc08b0034   (8865 kB)
[    0.000000]       .init : 0xc08b1000 - 0xc08f2000   ( 260 kB)
[    0.000000]       .data : 0xc08f2000 - 0xc09407f0   ( 314 kB)
[    0.000000]        .bss : 0xc09407f0 - 0xc0982d58   ( 266 kB)
[    0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=1, Nodes=1
[    0.000000] Preemptible hierarchical RCU implementation.
[    0.000000]  Build-time adjustment of leaf fanout to 32.
[    0.000000] NR_IRQS:16 nr_irqs:16 16
[    0.000000] IRQ: Found an INTC at 0xfa200000 (revision 5.0) with 128 interrupts
[    0.000000] OMAP clockevent source: timer2 at 24000000 Hz
[    0.000015] sched_clock: 32 bits at 24MHz, resolution 41ns, wraps every 89478484971ns
[    0.000036] clocksource: timer1: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 79635851949 ns
[    0.000047] OMAP clocksource: timer1 at 24000000 Hz
[    0.000222] clocksource_probe: no matching clocksources found
[    0.000415] Console: colour dummy device 80x30
[    0.000442] WARNING: Your 'console=ttyO0' has been replaced by 'ttyS0'
[    0.000448] This ensures that you still see kernel messages. Please
[    0.000454] update your kernel commandline.
[    0.000473] Calibrating delay loop... 795.44 BogoMIPS (lpj=3977216)
[    0.089064] pid_max: default: 32768 minimum: 301
[    0.089193] Mount-cache hash table entries: 1024 (order: 0, 4096 bytes)
[    0.089205] Mountpoint-cache hash table entries: 1024 (order: 0, 4096 bytes)
[    0.089932] Initializing cgroup subsys io
[    0.089964] Initializing cgroup subsys memory
[    0.090005] Initializing cgroup subsys devices
[    0.090021] Initializing cgroup subsys freezer
[    0.090036] Initializing cgroup subsys perf_event
[    0.090048] Initializing cgroup subsys pids
[    0.090078] CPU: Testing write buffer coherency: ok
[    0.090499] Setting up static identity map for 0x80008200 - 0x80008258
[    0.092680] devtmpfs: initialized
[    0.105440] VFP support v0.3: implementor 41 architecture 3 part 30 variant c rev 3
[    0.120529] omap_hwmod: debugss: _wait_target_disable failed
[    0.175584] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns
[    0.179852] pinctrl core: initialized pinctrl subsystem
[    0.181216] NET: Registered protocol family 16
[    0.183420] DMA: preallocated 256 KiB pool for atomic coherent allocations
[    0.209061] cpuidle: using governor ladder
[    0.239048] cpuidle: using governor menu
[    0.243661] OMAP GPIO hardware version 0.1
[    0.254360] hw-breakpoint: debug architecture 0x4 unsupported.
[    0.297629] edma 49000000.edma: TI EDMA DMA engine driver
[    0.298606] reg-fixed-voltage fixedregulator@2: could not find pctldev for node /ocp/l4_wkup@44c00000/scm@210000/pinmux@800/pinmux_wl12xx_gpio, deferring probe
[    0.302364] omap_i2c 44e0b000.i2c: could not find pctldev for node /ocp/l4_wkup@44c00000/scm@210000/pinmux@800/pinmux_i2c0_pins, deferring probe
[    0.302525] media: Linux media interface: v0.10
[    0.302588] Linux video capture interface: v2.00
[    0.302638] pps_core: LinuxPPS API ver. 1 registered
[    0.302646] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <[email protected] <mailto:[email protected]> >
[    0.302676] PTP clock support registered
[    0.302741] EDAC MC: Ver: 3.0.0
[    0.303966] omap-mailbox 480c8000.mailbox: omap mailbox rev 0x400
[    0.304332] Advanced Linux Sound Architecture Driver Initialized.
[    0.305512] clocksource: Switched to clocksource timer1
[    0.316775] NET: Registered protocol family 2
[    0.317599] TCP established hash table entries: 2048 (order: 1, 8192 bytes)
[    0.317636] TCP bind hash table entries: 2048 (order: 1, 8192 bytes)
[    0.317663] TCP: Hash tables configured (established 2048 bind 2048)
[    0.317748] UDP hash table entries: 256 (order: 0, 4096 bytes)
[    0.317767] UDP-Lite hash table entries: 256 (order: 0, 4096 bytes)
[    0.317925] NET: Registered protocol family 1
[    0.318352] RPC: Registered named UNIX socket transport module.
[    0.318366] RPC: Registered udp transport module.
[    0.318372] RPC: Registered tcp transport module.
[    0.318379] RPC: Registered tcp NFSv4.1 backchannel transport module.
[    0.319330] hw perfevents: enabled with armv7_cortex_a8 PMU driver, 5 counters available
[    0.321392] futex hash table entries: 256 (order: -1, 3072 bytes)
[    0.329780] squashfs: version 4.0 (2009/01/31) Phillip Lougher
[    0.330717] NFS: Registering the id_resolver key type
[    0.330798] Key type id_resolver registered
[    0.330807] Key type id_legacy registered
[    0.330886] ntfs: driver 2.1.32 [Flags: R/O].
[    0.334673] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 248)
[    0.334706] io scheduler noop registered
[    0.334719] io scheduler deadline registered
[    0.334877] io scheduler cfq registered (default)
[    0.336555] pinctrl-single 44e10800.pinmux: 142 pins at pa f9e10800 size 568
[    0.339415] backlight supply power not found, using dummy regulator
[    0.402480] Serial: 8250/16550 driver, 10 ports, IRQ sharing disabled
[    0.406962] 44e09000.serial: ttyS0 at MMIO 0x44e09000 (irq = 158, base_baud = 3000000) is a 8250
[    1.017357] console [ttyS0] enabled
[    1.022206] 48022000.serial: ttyS1 at MMIO 0x48022000 (irq = 159, base_baud = 3000000) is a 8250
[    1.032273] [drm] Initialized drm 1.1.0 20060810
[    1.039564] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
[    1.046349] [drm] No driver support for vblank timestamp query.
[    1.062121] Console: switching to colour frame buffer device 60x34
[    1.070360] tilcdc 4830e000.lcdc: fb0:  frame buffer device
[    1.105531] [drm] Initialized tilcdc 1.0.0 20121205 on minor 0
[    1.118644] loop: module loaded
[    1.124253] libphy: Fixed MDIO Bus: probed
[    1.185550] davinci_mdio 4a101000.mdio: davinci mdio revision 1.6
[    1.191695] davinci_mdio 4a101000.mdio: detected phy mask fffffffe
[    1.198786] libphy: 4a101000.mdio: probed
[    1.202886] davinci_mdio 4a101000.mdio: phy[0]: device 4a101000.mdio:00, driver SMSC LAN8710/LAN8720
[    1.212890] cpsw 4a100000.ethernet: Detected MACID = a0:f6:fd:4c:a6:ba
[    1.220531] cpsw 4a100000.ethernet: cpsw: Detected MACID = c4:ed:ba:88:2a:92
[    1.229382] mousedev: PS/2 mouse device common for all mice
[    1.235845] i2c /dev entries driver
[    1.240508] cpuidle: enable-method property 'ti,am3352' found operations
[    1.248197] omap_hsmmc 48060000.mmc: Got CD GPIO
[    1.275713] pinctrl-single 44e10800.pinmux: bad data for mux pinmux_mmc2_pins
[    1.282895] pinctrl-single 44e10800.pinmux: no pins entries for pinmux_mmc2_pins
[    1.317159] ledtrig-cpu: registered to indicate activity on CPUs
[    1.326069] NET: Registered protocol family 10
[    1.332092] sit: IPv6 over IPv4 tunneling driver
[    1.337715] NET: Registered protocol family 17
[    1.342510] Key type dns_resolver registered
[    1.347095] omap_voltage_late_init: Voltage driver support not added
[    1.407145] tps65910-rtc tps65910-rtc: rtc core: registered tps65910-rtc as rtc0
[    1.415278] omap_i2c 44e0b000.i2c: bus 0 rev0.11 at 400 kHz
[    1.421665] omap_hsmmc 48060000.mmc: Got CD GPIO
[    1.426813] vmmc: supplied by vbat
[    1.466341] pinctrl-single 44e10800.pinmux: bad data for mux pinmux_mmc2_pins
[    1.474737] pinctrl-single 44e10800.pinmux: no pins entries for pinmux_mmc2_pins
[    1.513247] mmc0: host does not support reading read-only switch, assuming write-enable
[    1.523414] mmc0: new high speed SDHC card at address 0001
[    1.529635] mmcblk0: mmc0:0001 AS 3.72 GiB
[    1.535996]  mmcblk0: p1 p2 p3
[    1.595932] vdd_mpu: supplied by vbat
[    1.602167] input: gpio_buttons@0 as /devices/platform/gpio_buttons@0/input/input0
[    1.618291] tps65910-rtc tps65910-rtc: setting system clock to 2019-02-01 20:07:49 UTC (1549051669)
[    1.639394] lis3_reg: disabling
[    1.655732] ALSA device list:
[    1.658720]   No soundcards found.
[    1.678290] EXT4-fs (mmcblk0p3): couldn't mount as ext3 due to feature incompatibilities
[    1.696920] EXT4-fs (mmcblk0p3): couldn't mount as ext2 due to feature incompatibilities
[    2.183999] EXT4-fs (mmcblk0p3): recovery complete
[    2.196864] EXT4-fs (mmcblk0p3): mounted filesystem with ordered data mode. Opts: (null)
[    2.205084] VFS: Mounted root (ext4 filesystem) on device 179:3.
[    2.225670] devtmpfs: mounted
[    2.235781] Freeing unused kernel memory: 260K (c08b1000 - c08f2000)
[    2.242162] This architecture does not have kernel memory protection.

INIT: version 2.88 booting

Starting udev

[    3.090091] udevd[78]: starting version 3.2.5
[    3.106175] random: udevd: uninitialized urandom read (16 bytes read, 26 bits of entropy available)
[    3.118667] random: udevd: uninitialized urandom read (16 bytes read, 26 bits of entropy available)
[    3.128014] random: udevd: uninitialized urandom read (16 bytes read, 26 bits of entropy available)
[    3.137335] random: udevd: uninitialized urandom read (16 bytes read, 26 bits of entropy available)
[    3.218433] udevd[79]: starting eudev-3.2.5
[    3.325886] random: udevd: uninitialized urandom read (16 bytes read, 29 bits of entropy available)
[    3.346155] random: udevd: uninitialized urandom read (16 bytes read, 29 bits of entropy available)
[    4.820708] EXT4-fs (mmcblk0p3): re-mounted. Opts: data=ordered
[    5.548283] random: dd: uninitialized urandom read (512 bytes read, 43 bits of entropy available)

INIT: Entering runlevel: 5

Configuring network interfaces... [ 5.820546] net eth0: initializing cpsw version 1.12 (0)

[    5.825987] net eth0: initialized cpsw ale version 1.4
[    5.831150] net eth0: ALE Table size 1024
[    5.838581] net eth0: phy found : id is : 0x7c0f1
[    5.851838] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
[    9.896392] cpsw 4a100000.ethernet eth0: Link is Up - 100Mbps/Full - flow control rx/tx
[    9.904635] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready

chown: unrecognized option '--reference=/etc/resolv.conf'

BusyBox v1.27.2 (2018-11-05 21:16:09 UTC) multi-call binary.

Usage: chown [-Rh]... USER[:[GRP]] FILE...

chmod: unrecognized option '--reference=/etc/resolv.conf'

BusyBox v1.27.2 (2018-11-05 21:16:09 UTC) multi-call binary.

Usage: chmod [-R] MODE[,MODE]... FILE...

done.

Starting system message bus: [ 14.887099] random: dbus-daemon: uninitialized urandom read (12 bytes read, 62 bits of entropy available)

[   14.912318] random: dbus-daemon: uninitialized urandom read (12 bytes read, 62 bits of entropy available)

dbus.

Starting OpenBSD Secure Shell server: sshd

[   15.393971] random: sshd: uninitialized urandom read (32 bytes read, 65 bits of entropy available)

done.

Starting Xserver

Starting DHCP server:

.

starting DNS forwarder and DHCP server: dnsmasq...

X.Org X Server 1.19.6

Release Date: 2017-12-20

X Protocol Version 11, Revision 0

Build Operating System: Linux 4.15.0-38-generic x86_64

Current Operating System: Linux polycaptil-machine-am335x-evmsk 4.4.19-ge581bb1cac #1 PREEMPT Thu May 24 11:42:17 CEST 2018 armv7l

Kernel command line: console=ttyO0,115200 root=/dev/mmcblk0p3 rw

Build Date: 05 November 2018 09:33:21PM

Current version of pixman: 0.34.0

Before reporting problems, check http://wiki.x.org

to make sure that you have the latest version.

Markers: (--) probed, (**) from config file, (==) default setting,

(++) from command line, (!!) notice, (II) informational,

(WW) warning, (EE) error, (NI) not implemented, (??) unknown.

(==) Log file: "/var/log/Xorg.0.log", Time: Fri Feb 1 20:08:02 2019

(==) Using config file: "/etc/X11/xorg.conf"

(==) Using system config directory "/usr/share/X11/xorg.conf.d"

done.

Starting HOSTAP Daemon: Configuration file: /etc/hostapd.conf

nl80211: 'nl80211' generic netlink not found

Failed to initialize driver 'nl80211'

wlan0: interface state UNINITIALIZED->DISABLED

wlan0: AP-DISABLED

hostapd_free_hapd_data: Interface wlan0 wasn't started

Starting ntpd: done

Starting syslogd/klogd: done

Starting crond: OK

Poky (Yocto Project Reference Distro) 2.5
polycaptil-machine-am335x-evmsk /dev/ttyS0

polycaptil-machine-am335x-evmsk login: D-BUS per-session daemon address is:
unix:abstract=/tmp/dbus-07WuJSySeb,guid=a3e41f2692316c19766e95535c54a7 25

Size 1024x768 not found in available modes

Error: No calibratable devices found.

matchbox: Cant find a keycode for keysym 269025056

matchbox: ignoring key shortcut XF86Calendar=!$contacts

matchbox: Cant find a keycode for keysym 2809

matchbox: ignoring key shortcut telephone=!$dates

matchbox: Cant find a keycode for keysym 269025050

matchbox: ignoring key shortcut XF86Start=!matchbox-remote -desktop

dbus-daemon[358]: Activating service name='org.a11y.atspi.Registry' requested by ':1.0' (uid=0 pid=354 comm="matchbox-terminal ")

dbus-daemon[358]: Successfully activated service 'org.a11y.atspi.Registry'

SpiRegistry daemon is running with well-known name - org.a11y.atspi.Registry

[   30.662697] random: nonblocking pool is initialized

Poky (Yocto Project Reference Distro) 2.5
polycaptil-machine-am335x-evmsk /dev/ttyS0

Thank’s to take time to read my message.

N.Stanisavljevic

--
_______________________________________________
yocto mailing list
[email protected] <mailto:[email protected]>
https://lists.yoctoproject.org/listinfo/yocto

#6 lore raw

Hello Nikola,

Two things, which immediately came to my mind:
[1 - Harder way] Either to change xorg-x11-server in sumo to match at least xorg-x11-server *1.20.3;*
(harder way, since few people know exact dependencies among various
GFX packages, and what
and how many packages need to be also changed to make
xorg-x11-server 1.20.3 to work)
[2 - Easier Way] Either to migrate YOCTO to Thud, where the correct xorg-x11-server package 1.20.3
is already fixed and set!
(easier way, since exact dependencies among various GFX packages are
already set for 1.20.3)

Best Regards,
Zoran
_______

Quoted 883 lines · Stanisavljevic

Thank you Zoran for trying to help me.
I tried to resolve the problem, but I didn’t succeed yet, I think I will to continue, and If after some time I find nothing, I’m going to migrate to the thud version.

I will maybe try to use Bugzilla

Nikola

*De :* Zoran Stojsavljevic <[email protected]> *Envoyé :* mardi 5 février 2019 19:28
*À :* Stanisavljevic <[email protected]>
*Cc :* Yocto Project <[email protected]>; [email protected] *Objet :* Re: [yocto] yocto touchscreen

Hello Nikola,

Let us try to cut to the chase!

After reading what Marc Ferland says/writes, and looking into the following:
https://bugzilla.redhat.com/show_bug.cgi?id=1650634

I have spotted the following:

*Pat Riehecky* *2018-11-20 14:28:22 UTC *

*the bug remains with the elrepo kernels:kernel-ml-4.19.2-1.el7.elrepo.x86_64kernel-lt-4.4.163-1.el7.elrepo.x86_64*

I never had this problem since I do not use Xorg (GFX), rather I only

use serial console from VBox VM from my BBB (pass-through).

Thus, my suggestion for you, to skip the whole mess is to rebuild your

distro *in the light of YOCTO Project 2.6.1 (thud 20.0.0.1).*

My best guess (then you'll inherit YOCTO kernel 4.20.x with fixed Xorg - X11).

I am using Fedora 29 on my laptop. Also from the bugzilla:

*Pat Riehecky* *2018-11-20 15:46:11 UTC *

*Bug resolved by rebuilding xorg-x11-server-1.20.3-1.fc29 [1] for 7.6.*

*With this in mind it appears to be an Xorg server bug rather than fbdev.*

From my HP EliteBook 840 G1 Fedora 29, Xorg.0.log - February 5th, 2019.,

I have the following:

[    26.955] Kernel command line: BOOT_IMAGE=/

*vmlinuz-4.20.6-200.fc29.x86_64*

root=/dev/mapper/fedora-root ro rd.lvm.lv=fedora/root rd.lvm.lv=fedora/swap rhgb

quiet LANG=en_US.UTF-8

[    26.955] Build Date: 11 January 2019  12:47:38PM
*[    26.955] Build ID: xorg-x11-server 1.20.3-3.fc29*
[    26.955] Current version of pixman: 0.34.0

Best Regards,
Zoran
_______

Quoted 10 lines · Zoran Stojsavljevic

Hello Nikola,

Quoted 5 lines

I created a kernel recipe with a bbappend file, and, I added the same defconfig that I used for krogoth version. The bbappend for kernel recipe concern meta-ti layer. I didn't edited defconfig file in other layers which contain a kernel recipe.

It could be some problem that Sumo does not take your bbappend file into

the

Quoted 5 lines

consideration as placed.

It could be something else, as well.

I have the same issue with my defconfig file for my Thud Beagle Bone

Black (BBB)

Quoted 1 line

standard board. Every time I recompile my YOCTO for it for different

releases, I need

Quoted 1 line

to import my specific defconfig. But I use complete different repos for

my standard

Quoted 11 lines

Beagle Bone Black than YOCTO BBB Poky reference distro.

Here is what I use in Thud (my bblayers.conf):

POKY_BBLAYERS_CONF_VERSION = "2"
BBPATH = "${TOPDIR}"
BBFILES ?= ""

BBLAYERS ?= " \
    /home/user/projects2/beaglebone-black/yocto-thud/meta-bbb \

/home/user/projects2/beaglebone-black/yocto-thud/meta-openembedded/meta-networking \

Quoted 1 line

/home/user/projects2/beaglebone-black/yocto-thud/meta-openembedded/meta-oe \

Quoted 1 line

/home/user/projects2/beaglebone-black/yocto-thud/meta-openembedded/meta-python \

Quoted 5 lines
    /home/user/projects2/beaglebone-black/yocto-thud/meta-qt5 \
    /home/user/projects2/beaglebone-black/yocto-thud/poky/meta \
    /home/user/projects2/beaglebone-black/yocto-thud/poky/meta-poky"

There, I replace defconfig in this layer:

/home/user/projects2/beaglebone-black/yocto-thud/meta-bbb

Quoted 4 lines

with my own defconfig.

In the directory:

/home/user/projects2/beaglebone-black/yocto-thud/meta-bbb/recipes-kernel/linux/linux-stable-4.19/beaglebone

Quoted 2 lines

If you use only Poky repository, then you need to read the following

paragraph (how to use

Quoted 3 lines

your defconfig with Poky):

[2.3.3. Changing the Configuration] YOCTO Project Linux Development

Manual

Quoted 1 line

https://www.yoctoproject.org/docs/2.5/kernel-dev/kernel-dev.html#using-an-in-tree-defconfig-file

Quoted 9 lines

2.3.3. Changing the Configuration

I hope this will help. Please, keep us posted!

Zoran
_______

On Tue, Feb 5, 2019 at 10:54 AM Stanisavljevic <

Quoted 6 lines · [email protected]> wrote:
Quoted 6 lines

Hy Zoran

Thank's to take time to answer

I created a kernel recipe with a bbappend file, and, I added the same

defconfig that I used for krogoth version.

Quoted 2 lines
Quoted 2 lines

The bbappend for kernel recipe concern meta-ti layer.
I didn't edited defconfig file in other layers which contain a kernel

recipe.

Quoted 2 lines
Quoted 2 lines

I think it's a problem which concern the screen resolution, screen

frequency and adc touchscreen.

Quoted 1 line
Quoted 1 line

Something is different between the krogoth and sumo version, but I

didn't find what is changed...

Quoted 3 lines
Quoted 3 lines

Xrandr show that problem is maybe around the screen resolution. It's show the next message : "Size 1024x768 not found in available

modes"

Quoted 1 line
Quoted 1 line

Maybe it was changed between krogoth and sumo version...but I don't

know where it is indicated if sources files...

Quoted 2 lines
Quoted 2 lines

What do you think ? problem can be around the screen resolution, screen

frequency and adc touchscreen ?

Quoted 11 lines
Quoted 11 lines

Nikola

-----Message d'origine-----
De : Zoran Stojsavljevic <[email protected]> Envoyé : lundi 4 février 2019 17:08
À : Stanisavljevic <[email protected]> Cc : Yocto Project <[email protected]> Objet : Re: [yocto] yocto touchscreen

Quoted 1 line

I built a first version of this os with version krogoth and it works

fine.

Quoted 13 lines
Quoted 13 lines
Quoted 4 lines

Now I build a second version of this os with version sumo and the touch screen works fine during boot process but when kernel is loaded, touchscreen freeze / lock and impossible to use it.

Did you compare Krogoth kernel defconfig with Sumo kernel defconfig?

May there are some mismatches in drivers' setup between these two?

Zoran
_______

On Mon, Feb 4, 2019 at 12:24 PM Stanisavljevic <

Quoted 9 lines · [email protected]> wrote:
Quoted 9 lines
Quoted 9 lines

Hy Team,

I have a problem

Quoted 5 lines
Quoted 5 lines
Quoted 5 lines

I buid a custom os for AM335x processor and I used yocto to do it.

I build a first version of this os with version krogoth and it work

fine.

Quoted 4 lines
Quoted 4 lines
Quoted 4 lines

Now I build a second version of this os with version sumo and the

touchscreen work fine during boot process but when kernel is loaded, touchscreen freeze / lock and impossible to use it.

Quoted 2 lines
Quoted 2 lines
Quoted 2 lines

The terminal is printed on the touchscreen but the screen is locked,

impossible to write a command or to move the mouse to select, ….

Quoted 4 lines
Quoted 4 lines
Quoted 4 lines

Here is the log of boot to the user session (log got with serial

communication between PC and board) :

Quoted 73 lines
Quoted 73 lines
Quoted 73 lines

U-Boot SPL 2017.05-00001-g041a398 (May 02 2018 - 18:36:57)

Trying to boot from MMC1

reading uboot.env

reading u-boot.img

reading u-boot.img

reading u-boot.img

reading u-boot.img

U-Boot 2017.05-00001-g041a398 (May 02 2018 - 18:36:57 +0200)

CPU : AM335X-GP rev 2.1

Model: TI AM335x EVM-SK

DRAM: 256 MiB

NAND: 0 MiB

MMC: OMAP SD/MMC: 0, OMAP SD/MMC: 1

reading uboot.env

ERROR: No USB device found

at drivers/usb/gadget/ether.c:2709/usb_ether_init()

Net: CACHE: Misaligned operation at range [8df323c0, 8df32464]

Warning: ethernet@4a100000 using MAC address from ROM

eth0: ethernet@4a100000

Hit any key to stop autoboot: 0

reading zImage

3412752 bytes read in 251 ms (13 MiB/s)

reading dtb

39733 bytes read in 12 ms (3.2 MiB/s)

## Flattened Device Tree blob at 82000000

Booting using the fdt blob at 0x82000000

Loading Device Tree to 8df19000, end 8df25b34 ... OK

Starting kernel ...

Quoted 7 lines
Quoted 7 lines
Quoted 7 lines
[    0.000000] Booting Linux on physical CPU 0x0
[    0.000000] Initializing cgroup subsys cpu
[    0.000000] Initializing cgroup subsys cpuacct
[    0.000000] Linux version 4.4.19-ge581bb1cac

(polycaptil@polycaptil-HP-Notebook) (gcc version 5.3.0 (GCC) ) #1 PREEMPT Thu May 24 11:42:17 CEST 2018

Quoted 2 lines
Quoted 2 lines
Quoted 2 lines
[    0.000000] CPU: ARMv7 Processor [413fc082] revision 2 (ARMv7),

cr=10c5387d

Quoted 2 lines
Quoted 2 lines
Quoted 2 lines
[    0.000000] CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing

instruction cache

Quoted 5 lines
Quoted 5 lines
Quoted 5 lines
[    0.000000] Machine model: TI AM335x EVM-SK
[    0.000000] cma: Reserved 48 MiB at 0x8a800000
Quoted 7 lines
Quoted 7 lines
Quoted 7 lines
[    0.000000] Memory policy: Data cache writeback
[    0.000000] CPU: All CPU(s) started in SVC mode.
[    0.000000] AM335X ES2.1 (sgx neon )
[    0.000000] Built 1 zonelists in Zone order, mobility grouping

on. Total pages: 64960

Quoted 2 lines
Quoted 2 lines
Quoted 2 lines
[    0.000000] Kernel command line: console=ttyO0,115200

root=/dev/mmcblk0p3 rw

Quoted 4 lines
Quoted 4 lines
Quoted 4 lines
[    0.000000] PID hash table entries: 1024 (order: 0, 4096 bytes)
[    0.000000] Dentry cache hash table entries: 32768 (order: 5,

131072 bytes)

Quoted 2 lines
Quoted 2 lines
Quoted 2 lines
[    0.000000] Inode-cache hash table entries: 16384 (order: 4, 65536

bytes)

Quoted 2 lines
Quoted 2 lines
Quoted 2 lines
[    0.000000] Memory: 200444K/262144K available (6495K kernel code,

313K rwdata, 2368K rodata, 260K init, 265K bss, 12548K reserved, 49152K cma-reserved, 0K highmem)

Quoted 17 lines
Quoted 17 lines
Quoted 17 lines
[    0.000000] Virtual kernel memory layout:
[    0.000000]     vector  : 0xffff0000 - 0xffff1000   (   4 kB)
[    0.000000]     fixmap  : 0xffc00000 - 0xfff00000   (3072 kB)
[    0.000000]     vmalloc : 0xd0800000 - 0xff800000   ( 752 MB)
[    0.000000]     lowmem  : 0xc0000000 - 0xd0000000   ( 256 MB)
[    0.000000]     pkmap   : 0xbfe00000 - 0xc0000000   (   2 MB)
[    0.000000]     modules : 0xbf000000 - 0xbfe00000   (  14 MB)
[    0.000000]       .text : 0xc0008000 - 0xc08b0034   (8865 kB)
Quoted 7 lines
Quoted 7 lines
Quoted 7 lines
[    0.000000]       .init : 0xc08b1000 - 0xc08f2000   ( 260 kB)
[    0.000000]       .data : 0xc08f2000 - 0xc09407f0   ( 314 kB)
[    0.000000]        .bss : 0xc09407f0 - 0xc0982d58   ( 266 kB)
[    0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=1,

Nodes=1

Quoted 8 lines
Quoted 8 lines
Quoted 8 lines
[    0.000000] Preemptible hierarchical RCU implementation.
[    0.000000]  Build-time adjustment of leaf fanout to 32.
[    0.000000] NR_IRQS:16 nr_irqs:16 16
[    0.000000] IRQ: Found an INTC at 0xfa200000 (revision 5.0) with

128 interrupts

Quoted 4 lines
Quoted 4 lines
Quoted 4 lines
[    0.000000] OMAP clockevent source: timer2 at 24000000 Hz
[    0.000015] sched_clock: 32 bits at 24MHz, resolution 41ns, wraps

every 89478484971ns

Quoted 2 lines
Quoted 2 lines
Quoted 2 lines
[    0.000036] clocksource: timer1: mask: 0xffffffff max_cycles:

0xffffffff, max_idle_ns: 79635851949 ns

Quoted 8 lines
Quoted 8 lines
Quoted 8 lines
[    0.000047] OMAP clocksource: timer1 at 24000000 Hz
[    0.000222] clocksource_probe: no matching clocksources found
[    0.000415] Console: colour dummy device 80x30
[    0.000442] WARNING: Your 'console=ttyO0' has been replaced by

'ttyS0'

Quoted 10 lines
Quoted 10 lines
Quoted 10 lines
[    0.000448] This ensures that you still see kernel messages. Please
[    0.000454] update your kernel commandline.
[    0.000473] Calibrating delay loop... 795.44 BogoMIPS (lpj=3977216)
[    0.089064] pid_max: default: 32768 minimum: 301
[    0.089193] Mount-cache hash table entries: 1024 (order: 0, 4096

bytes)

Quoted 2 lines
Quoted 2 lines
Quoted 2 lines
[    0.089205] Mountpoint-cache hash table entries: 1024 (order: 0,

4096 bytes)

Quoted 9 lines
Quoted 9 lines
Quoted 9 lines
[    0.089932] Initializing cgroup subsys io
[    0.089964] Initializing cgroup subsys memory
[    0.090005] Initializing cgroup subsys devices
[    0.090021] Initializing cgroup subsys freezer
Quoted 7 lines
Quoted 7 lines
Quoted 7 lines
[    0.090036] Initializing cgroup subsys perf_event
[    0.090048] Initializing cgroup subsys pids
[    0.090078] CPU: Testing write buffer coherency: ok
[    0.090499] Setting up static identity map for 0x80008200 -

0x80008258

Quoted 4 lines
Quoted 4 lines
Quoted 4 lines
[    0.092680] devtmpfs: initialized
[    0.105440] VFP support v0.3: implementor 41 architecture 3 part

30 variant c rev 3

Quoted 4 lines
Quoted 4 lines
Quoted 4 lines
[    0.120529] omap_hwmod: debugss: _wait_target_disable failed
[    0.175584] clocksource: jiffies: mask: 0xffffffff max_cycles:

0xffffffff, max_idle_ns: 19112604462750000 ns

Quoted 6 lines
Quoted 6 lines
Quoted 6 lines
[    0.179852] pinctrl core: initialized pinctrl subsystem
[    0.181216] NET: Registered protocol family 16
[    0.183420] DMA: preallocated 256 KiB pool for atomic coherent

allocations

Quoted 5 lines
Quoted 5 lines
Quoted 5 lines
[    0.209061] cpuidle: using governor ladder
[    0.239048] cpuidle: using governor menu
Quoted 7 lines
Quoted 7 lines
Quoted 7 lines
[    0.243661] OMAP GPIO hardware version 0.1
[    0.254360] hw-breakpoint: debug architecture 0x4 unsupported.
[    0.297629] edma 49000000.edma: TI EDMA DMA engine driver
[    0.298606] reg-fixed-voltage fixedregulator@2: could not find

pctldev for node /ocp/l4_wkup@44c00000/scm@210000/pinmux@800/pinmux_wl12xx_gpio, deferring probe

Quoted 2 lines
Quoted 2 lines
Quoted 2 lines
[    0.302364] omap_i2c 44e0b000.i2c: could not find pctldev for node

/ocp/l4_wkup@44c00000/scm@210000/pinmux@800/pinmux_i2c0_pins, deferring probe

Quoted 8 lines
Quoted 8 lines
Quoted 8 lines
[    0.302525] media: Linux media interface: v0.10
[    0.302588] Linux video capture interface: v2.00
[    0.302638] pps_core: LinuxPPS API ver. 1 registered
[    0.302646] pps_core: Software ver. 5.3.6 - Copyright 2005-2007

Rodolfo Giometti <[email protected]>

Quoted 7 lines
Quoted 7 lines
Quoted 7 lines
[    0.302676] PTP clock support registered
[    0.302741] EDAC MC: Ver: 3.0.0
[    0.303966] omap-mailbox 480c8000.mailbox: omap mailbox rev 0x400
Quoted 7 lines
Quoted 7 lines
Quoted 7 lines
[    0.304332] Advanced Linux Sound Architecture Driver Initialized.
[    0.305512] clocksource: Switched to clocksource timer1
[    0.316775] NET: Registered protocol family 2
[    0.317599] TCP established hash table entries: 2048 (order: 1,

8192 bytes)

Quoted 2 lines
Quoted 2 lines
Quoted 2 lines
[    0.317636] TCP bind hash table entries: 2048 (order: 1, 8192

bytes)

Quoted 2 lines
Quoted 2 lines
Quoted 2 lines
[    0.317663] TCP: Hash tables configured (established 2048 bind

2048)

Quoted 7 lines
Quoted 7 lines
Quoted 7 lines
[    0.317748] UDP hash table entries: 256 (order: 0, 4096 bytes)
[    0.317767] UDP-Lite hash table entries: 256 (order: 0, 4096 bytes)
[    0.317925] NET: Registered protocol family 1
Quoted 7 lines
Quoted 7 lines
Quoted 7 lines
[    0.318352] RPC: Registered named UNIX socket transport module.
[    0.318366] RPC: Registered udp transport module.
[    0.318372] RPC: Registered tcp transport module.
[    0.318379] RPC: Registered tcp NFSv4.1 backchannel transport

module.

Quoted 2 lines
Quoted 2 lines
Quoted 2 lines
[    0.319330] hw perfevents: enabled with armv7_cortex_a8 PMU

driver, 5 counters available

Quoted 7 lines
Quoted 7 lines
Quoted 7 lines
[    0.321392] futex hash table entries: 256 (order: -1, 3072 bytes)
[    0.329780] squashfs: version 4.0 (2009/01/31) Phillip Lougher
[    0.330717] NFS: Registering the id_resolver key type
Quoted 7 lines
Quoted 7 lines
Quoted 7 lines
[    0.330798] Key type id_resolver registered
[    0.330807] Key type id_legacy registered
[    0.330886] ntfs: driver 2.1.32 [Flags: R/O].
[    0.334673] Block layer SCSI generic (bsg) driver version 0.4

loaded (major 248)

Quoted 8 lines
Quoted 8 lines
Quoted 8 lines
[    0.334706] io scheduler noop registered
[    0.334719] io scheduler deadline registered
[    0.334877] io scheduler cfq registered (default)
[    0.336555] pinctrl-single 44e10800.pinmux: 142 pins at pa

f9e10800 size 568

Quoted 4 lines
Quoted 4 lines
Quoted 4 lines
[    0.339415] backlight supply power not found, using dummy regulator
[    0.402480] Serial: 8250/16550 driver, 10 ports, IRQ sharing

disabled

Quoted 2 lines
Quoted 2 lines
Quoted 2 lines
[    0.406962] 44e09000.serial: ttyS0 at MMIO 0x44e09000 (irq = 158,

base_baud = 3000000) is a 8250

Quoted 4 lines
Quoted 4 lines
Quoted 4 lines
[    1.017357] console [ttyS0] enabled
[    1.022206] 48022000.serial: ttyS1 at MMIO 0x48022000 (irq = 159,

base_baud = 3000000) is a 8250

Quoted 4 lines
Quoted 4 lines
Quoted 4 lines
[    1.032273] [drm] Initialized drm 1.1.0 20060810
[    1.039564] [drm] Supports vblank timestamp caching Rev 2

(21.10.2013).

Quoted 13 lines
Quoted 13 lines
Quoted 13 lines
[    1.046349] [drm] No driver support for vblank timestamp query.
[    1.062121] Console: switching to colour frame buffer device 60x34
[    1.070360] tilcdc 4830e000.lcdc: fb0:  frame buffer device
[    1.105531] [drm] Initialized tilcdc 1.0.0 20121205 on minor 0
[    1.118644] loop: module loaded
[    1.124253] libphy: Fixed MDIO Bus: probed
Quoted 7 lines
Quoted 7 lines
Quoted 7 lines
[    1.185550] davinci_mdio 4a101000.mdio: davinci mdio revision 1.6
[    1.191695] davinci_mdio 4a101000.mdio: detected phy mask fffffffe
[    1.198786] libphy: 4a101000.mdio: probed
[    1.202886] davinci_mdio 4a101000.mdio: phy[0]: device

4a101000.mdio:00, driver SMSC LAN8710/LAN8720

Quoted 2 lines
Quoted 2 lines
Quoted 2 lines
[    1.212890] cpsw 4a100000.ethernet: Detected MACID =

a0:f6:fd:4c:a6:ba

Quoted 2 lines
Quoted 2 lines
Quoted 2 lines
[    1.220531] cpsw 4a100000.ethernet: cpsw: Detected MACID =

c4:ed:ba:88:2a:92

Quoted 6 lines
Quoted 6 lines
Quoted 6 lines
[    1.229382] mousedev: PS/2 mouse device common for all mice
[    1.235845] i2c /dev entries driver
[    1.240508] cpuidle: enable-method property 'ti,am3352' found

operations

Quoted 4 lines
Quoted 4 lines
Quoted 4 lines
[    1.248197] omap_hsmmc 48060000.mmc: Got CD GPIO
[    1.275713] pinctrl-single 44e10800.pinmux: bad data for mux

pinmux_mmc2_pins

Quoted 2 lines
Quoted 2 lines
Quoted 2 lines
[    1.282895] pinctrl-single 44e10800.pinmux: no pins entries for

pinmux_mmc2_pins

Quoted 5 lines
Quoted 5 lines
Quoted 5 lines
[    1.317159] ledtrig-cpu: registered to indicate activity on CPUs
[    1.326069] NET: Registered protocol family 10
Quoted 7 lines
Quoted 7 lines
Quoted 7 lines
[    1.332092] sit: IPv6 over IPv4 tunneling driver
[    1.337715] NET: Registered protocol family 17
[    1.342510] Key type dns_resolver registered
[    1.347095] omap_voltage_late_init: Voltage driver support not

added

Quoted 2 lines
Quoted 2 lines
Quoted 2 lines
[    1.407145] tps65910-rtc tps65910-rtc: rtc core: registered

tps65910-rtc as rtc0

Quoted 8 lines
Quoted 8 lines
Quoted 8 lines
[    1.415278] omap_i2c 44e0b000.i2c: bus 0 rev0.11 at 400 kHz
[    1.421665] omap_hsmmc 48060000.mmc: Got CD GPIO
[    1.426813] vmmc: supplied by vbat
[    1.466341] pinctrl-single 44e10800.pinmux: bad data for mux

pinmux_mmc2_pins

Quoted 2 lines
Quoted 2 lines
Quoted 2 lines
[    1.474737] pinctrl-single 44e10800.pinmux: no pins entries for

pinmux_mmc2_pins

Quoted 2 lines
Quoted 2 lines
Quoted 2 lines
[    1.513247] mmc0: host does not support reading read-only switch,

assuming write-enable

Quoted 10 lines
Quoted 10 lines
Quoted 10 lines
[    1.523414] mmc0: new high speed SDHC card at address 0001
[    1.529635] mmcblk0: mmc0:0001 AS 3.72 GiB
[    1.535996]  mmcblk0: p1 p2 p3
[    1.595932] vdd_mpu: supplied by vbat
[    1.602167] input: gpio_buttons@0 as

/devices/platform/gpio_buttons@0/input/input0

Quoted 2 lines
Quoted 2 lines
Quoted 2 lines
[    1.618291] tps65910-rtc tps65910-rtc: setting system clock to
2019-02-01 20:07:49 UTC (1549051669)
Quoted 8 lines
Quoted 8 lines
Quoted 8 lines
[    1.639394] lis3_reg: disabling
[    1.655732] ALSA device list:
[    1.658720]   No soundcards found.
[    1.678290] EXT4-fs (mmcblk0p3): couldn't mount as ext3 due to

feature incompatibilities

Quoted 2 lines
Quoted 2 lines
Quoted 2 lines
[    1.696920] EXT4-fs (mmcblk0p3): couldn't mount as ext2 due to

feature incompatibilities

Quoted 4 lines
Quoted 4 lines
Quoted 4 lines
[    2.183999] EXT4-fs (mmcblk0p3): recovery complete
[    2.196864] EXT4-fs (mmcblk0p3): mounted filesystem with ordered

data mode. Opts: (null)

Quoted 6 lines
Quoted 6 lines
Quoted 6 lines
[    2.205084] VFS: Mounted root (ext4 filesystem) on device 179:3.
[    2.225670] devtmpfs: mounted
[    2.235781] Freeing unused kernel memory: 260K (c08b1000 -

c08f2000)

Quoted 2 lines
Quoted 2 lines
Quoted 2 lines
[    2.242162] This architecture does not have kernel memory

protection.

Quoted 8 lines
Quoted 8 lines
Quoted 8 lines

INIT: version 2.88 booting

Starting udev

[    3.090091] udevd[78]: starting version 3.2.5
[    3.106175] random: udevd: uninitialized urandom read (16 bytes

read, 26 bits of entropy available)

Quoted 2 lines
Quoted 2 lines
Quoted 2 lines
[    3.118667] random: udevd: uninitialized urandom read (16 bytes

read, 26 bits of entropy available)

Quoted 2 lines
Quoted 2 lines
Quoted 2 lines
[    3.128014] random: udevd: uninitialized urandom read (16 bytes

read, 26 bits of entropy available)

Quoted 2 lines
Quoted 2 lines
Quoted 2 lines
[    3.137335] random: udevd: uninitialized urandom read (16 bytes

read, 26 bits of entropy available)

Quoted 4 lines
Quoted 4 lines
Quoted 4 lines
[    3.218433] udevd[79]: starting eudev-3.2.5
[    3.325886] random: udevd: uninitialized urandom read (16 bytes

read, 29 bits of entropy available)

Quoted 2 lines
Quoted 2 lines
Quoted 2 lines
[    3.346155] random: udevd: uninitialized urandom read (16 bytes

read, 29 bits of entropy available)

Quoted 4 lines
Quoted 4 lines
Quoted 4 lines
[    4.820708] EXT4-fs (mmcblk0p3): re-mounted. Opts: data=ordered
[    5.548283] random: dd: uninitialized urandom read (512 bytes

read, 43 bits of entropy available)

Quoted 4 lines
Quoted 4 lines
Quoted 4 lines

INIT: Entering runlevel: 5

Configuring network interfaces... [ 5.820546] net eth0:

initializing cpsw version 1.12 (0)

Quoted 10 lines
Quoted 10 lines
Quoted 10 lines
[    5.825987] net eth0: initialized cpsw ale version 1.4
[    5.831150] net eth0: ALE Table size 1024
[    5.838581] net eth0: phy found : id is : 0x7c0f1
[    5.851838] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
[    9.896392] cpsw 4a100000.ethernet eth0: Link is Up - 100Mbps/Full

- flow control rx/tx

Quoted 17 lines
Quoted 17 lines
Quoted 17 lines
[    9.904635] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready

chown: unrecognized option '--reference=/etc/resolv.conf'

BusyBox v1.27.2 (2018-11-05 21:16:09 UTC) multi-call binary.

Usage: chown [-Rh]... USER[:[GRP]] FILE...

chmod: unrecognized option '--reference=/etc/resolv.conf'

BusyBox v1.27.2 (2018-11-05 21:16:09 UTC) multi-call binary.

Quoted 5 lines
Quoted 5 lines
Quoted 5 lines

Usage: chmod [-R] MODE[,MODE]... FILE...

done.

Starting system message bus: [ 14.887099] random: dbus-daemon:

uninitialized urandom read (12 bytes read, 62 bits of entropy available)

Quoted 2 lines
Quoted 2 lines
Quoted 2 lines
[   14.912318] random: dbus-daemon: uninitialized urandom read (12

bytes read, 62 bits of entropy available)

Quoted 6 lines
Quoted 6 lines
Quoted 6 lines

dbus.

Starting OpenBSD Secure Shell server: sshd

[   15.393971] random: sshd: uninitialized urandom read (32 bytes

read, 65 bits of entropy available)

Quoted 96 lines
Quoted 96 lines
Quoted 96 lines

done.

Starting Xserver

Starting DHCP server:

.

starting DNS forwarder and DHCP server: dnsmasq...

X.Org X Server 1.19.6

Release Date: 2017-12-20

X Protocol Version 11, Revision 0

Build Operating System: Linux 4.15.0-38-generic x86_64

Current Operating System: Linux polycaptil-machine-am335x-evmsk 4.4.19-ge581bb1cac #1 PREEMPT Thu May 24 11:42:17 CEST 2018 armv7l

Kernel command line: console=ttyO0,115200 root=/dev/mmcblk0p3 rw

Build Date: 05 November 2018 09:33:21PM

Current version of pixman: 0.34.0

Before reporting problems, check http://wiki.x.org

to make sure that you have the latest version.

Markers: (--) probed, (**) from config file, (==) default setting,

(++) from command line, (!!) notice, (II) informational,

(WW) warning, (EE) error, (NI) not implemented, (??) unknown.

(==) Log file: "/var/log/Xorg.0.log", Time: Fri Feb 1 20:08:02 2019

(==) Using config file: "/etc/X11/xorg.conf"

(==) Using system config directory "/usr/share/X11/xorg.conf.d"

done.

Starting HOSTAP Daemon: Configuration file: /etc/hostapd.conf

nl80211: 'nl80211' generic netlink not found

Failed to initialize driver 'nl80211'

wlan0: interface state UNINITIALIZED->DISABLED

wlan0: AP-DISABLED

hostapd_free_hapd_data: Interface wlan0 wasn't started

Starting ntpd: done

Starting syslogd/klogd: done

Starting crond: OK

Poky (Yocto Project Reference Distro) 2.5
polycaptil-machine-am335x-evmsk /dev/ttyS0

polycaptil-machine-am335x-evmsk login: D-BUS per-session daemon address is:
unix:abstract=/tmp/dbus-07WuJSySeb,guid=a3e41f2692316c19766e95535c54a7 25

Size 1024x768 not found in available modes

Error: No calibratable devices found.

matchbox: Cant find a keycode for keysym 269025056

matchbox: ignoring key shortcut XF86Calendar=!$contacts

matchbox: Cant find a keycode for keysym 2809

matchbox: ignoring key shortcut telephone=!$dates

matchbox: Cant find a keycode for keysym 269025050

Quoted 8 lines
Quoted 8 lines
Quoted 8 lines

matchbox: ignoring key shortcut XF86Start=!matchbox-remote -desktop

dbus-daemon[358]: Activating service name='org.a11y.atspi.Registry' requested by ':1.0' (uid=0 pid=354 comm="matchbox-terminal ")

dbus-daemon[358]: Successfully activated service

'org.a11y.atspi.Registry'

Quoted 23 lines
Quoted 23 lines
Quoted 22 lines

SpiRegistry daemon is running with well-known name - org.a11y.atspi.Registry

[   30.662697] random: nonblocking pool is initialized

Poky (Yocto Project Reference Distro) 2.5
polycaptil-machine-am335x-evmsk /dev/ttyS0

Thank’s to take time to read my message.

N.Stanisavljevic

--
_______________________________________________
yocto mailing list
[email protected]
https://lists.yoctoproject.org/listinfo/yocto

#7 lore raw

Hello Zoran

I will try these 2 ways.

Of course, the second way is the easiest, but I will try also the first way only to see if it is possible.

I will keep you in touch if the first way can work.

Best regards,

Nikola

De : Zoran Stojsavljevic <[email protected]>
Envoyé : lundi 18 février 2019 15:21
À : Stanisavljevic <[email protected]>
Cc : Yocto Project <[email protected]>; Marc Ferland <[email protected]> Objet : Re: [yocto] yocto touchscreen

Hello Nikola,

Two things, which immediately came to my mind:

[1 - Harder way] Either to change xorg-x11-server in sumo to match at least xorg-x11-server 1.20.3;

(harder way, since few people know exact dependencies among various GFX packages, and what

and how many packages need to be also changed to make xorg-x11-server 1.20.3 to work)

[2 - Easier Way] Either to migrate YOCTO to Thud, where the correct xorg-x11-server package 1.20.3

is already fixed and set!

(easier way, since exact dependencies among various GFX packages are already set for 1.20.3)

Best Regards,

Zoran

_______

On Mon, Feb 18, 2019 at 2:48 PM Stanisavljevic <[email protected] <mailto:[email protected]> > wrote:

Thank you Zoran for trying to help me.
I tried to resolve the problem, but I didn’t succeed yet, I think I will to continue, and If after some time I find nothing, I’m going to migrate to the thud version.

I will maybe try to use Bugzilla

Nikola

De : Zoran Stojsavljevic <[email protected] <mailto:[email protected]> >
Envoyé : mardi 5 février 2019 19:28
À : Stanisavljevic <[email protected] <mailto:[email protected]> >
Cc : Yocto Project <[email protected] <mailto:[email protected]> >; [email protected] <mailto:[email protected]> Objet : Re: [yocto] yocto touchscreen

Hello Nikola,

Let us try to cut to the chase!

After reading what Marc Ferland says/writes, and looking into the following:
https://bugzilla.redhat.com/show_bug.cgi?id=1650634

I have spotted the following:

Pat Riehecky 2018-11-20 14:28:22 UTC

the bug remains with the elrepo kernels:
kernel-ml-4.19.2-1.el7.elrepo.x86_64
kernel-lt-4.4.163-1.el7.elrepo.x86_64

I never had this problem since I do not use Xorg (GFX), rather I only

use serial console from VBox VM from my BBB (pass-through).

Thus, my suggestion for you, to skip the whole mess is to rebuild your

distro in the light of YOCTO Project 2.6.1 (thud 20.0.0.1).

My best guess (then you'll inherit YOCTO kernel 4.20.x with fixed Xorg - X11).

I am using Fedora 29 on my laptop. Also from the bugzilla:

Pat Riehecky 2018-11-20 15:46:11 UTC

Bug resolved by rebuilding xorg-x11-server-1.20.3-1.fc29 [1] for 7.6.

With this in mind it appears to be an Xorg server bug rather than fbdev.

From my HP EliteBook 840 G1 Fedora 29, Xorg.0.log - February 5th, 2019.,

I have the following:

[    26.955] Kernel command line: BOOT_IMAGE=/vmlinuz-4.20.6-200.fc29.x86_64

root=/dev/mapper/fedora-root ro rd.lvm.lv <http://rd.lvm.lv> =fedora/root rd.lvm.lv <http://rd.lvm.lv> =fedora/swap rhgb

quiet LANG=en_US.UTF-8

[    26.955] Build Date: 11 January 2019  12:47:38PM
[    26.955] Build ID: xorg-x11-server 1.20.3-3.fc29
[    26.955] Current version of pixman: 0.34.0

Best Regards,
Zoran
_______

Quoted 696 lines · On Tue, Feb 5, 2019 at 2:49 PM Zoran Stojsavljevic…

Hello Nikola,

Quoted 5 lines

I created a kernel recipe with a bbappend file, and, I added the same defconfig that I used for krogoth version. The bbappend for kernel recipe concern meta-ti layer. I didn't edited defconfig file in other layers which contain a kernel recipe.

It could be some problem that Sumo does not take your bbappend file into the consideration as placed.

It could be something else, as well.

I have the same issue with my defconfig file for my Thud Beagle Bone Black (BBB) standard board. Every time I recompile my YOCTO for it for different releases, I need to import my specific defconfig. But I use complete different repos for my standard Beagle Bone Black than YOCTO BBB Poky reference distro.

Here is what I use in Thud (my bblayers.conf):

POKY_BBLAYERS_CONF_VERSION = "2"
BBPATH = "${TOPDIR}"
BBFILES ?= ""

BBLAYERS ?= " \
    /home/user/projects2/beaglebone-black/yocto-thud/meta-bbb \
    /home/user/projects2/beaglebone-black/yocto-thud/meta-openembedded/meta-networking \
    /home/user/projects2/beaglebone-black/yocto-thud/meta-openembedded/meta-oe \
    /home/user/projects2/beaglebone-black/yocto-thud/meta-openembedded/meta-python \
    /home/user/projects2/beaglebone-black/yocto-thud/meta-qt5 \
    /home/user/projects2/beaglebone-black/yocto-thud/poky/meta \
    /home/user/projects2/beaglebone-black/yocto-thud/poky/meta-poky"

There, I replace defconfig in this layer: /home/user/projects2/beaglebone-black/yocto-thud/meta-bbb with my own defconfig.

In the directory:
/home/user/projects2/beaglebone-black/yocto-thud/meta-bbb/recipes-kernel/linux/linux-stable-4.19/beaglebone

If you use only Poky repository, then you need to read the following paragraph (how to use your defconfig with Poky):

[2.3.3. Changing the Configuration] YOCTO Project Linux Development Manual
https://www.yoctoproject.org/docs/2.5/kernel-dev/kernel-dev.html#using-an-in-tree-defconfig-file
2.3.3. Changing the Configuration

I hope this will help. Please, keep us posted!

Zoran
_______

Quoted 642 lines · On Tue, Feb 5, 2019 at 10:54 AM Stanisavljevic <[email protected]…

Hy Zoran

Thank's to take time to answer

I created a kernel recipe with a bbappend file, and, I added the same defconfig that I used for krogoth version. The bbappend for kernel recipe concern meta-ti layer.
I didn't edited defconfig file in other layers which contain a kernel recipe.

I think it's a problem which concern the screen resolution, screen frequency and adc touchscreen. Something is different between the krogoth and sumo version, but I didn't find what is changed...

Xrandr show that problem is maybe around the screen resolution.
It's show the next message : "Size 1024x768 not found in available modes"
Maybe it was changed between krogoth and sumo version...but I don't know where it is indicated if sources files...

What do you think ? problem can be around the screen resolution, screen frequency and adc touchscreen ?

Nikola

-----Message d'origine-----
De : Zoran Stojsavljevic <[email protected] <mailto:[email protected]> > Envoyé : lundi 4 février 2019 17:08
À : Stanisavljevic <[email protected] <mailto:[email protected]> > Cc : Yocto Project <[email protected] <mailto:[email protected]> > Objet : Re: [yocto] yocto touchscreen

Quoted 5 lines

I built a first version of this os with version krogoth and it works fine.

Now I build a second version of this os with version sumo and the touch screen works fine during boot process but when kernel is loaded, touchscreen freeze / lock and impossible to use it.

Did you compare Krogoth kernel defconfig with Sumo kernel defconfig?

May there are some mismatches in drivers' setup between these two?

Zoran
_______

Quoted 600 lines · On Mon, Feb 4, 2019 at 12:24 PM Stanisavljevic <[email protected]…

Hy Team,

I have a problem

I buid a custom os for AM335x processor and I used yocto to do it.

I build a first version of this os with version krogoth and it work fine.

Now I build a second version of this os with version sumo and the touchscreen work fine during boot process but when kernel is loaded, touchscreen freeze / lock and impossible to use it.

The terminal is printed on the touchscreen but the screen is locked, impossible to write a command or to move the mouse to select, ….

Here is the log of boot to the user session (log got with serial communication between PC and board) :

U-Boot SPL 2017.05-00001-g041a398 (May 02 2018 - 18:36:57)

Trying to boot from MMC1

reading uboot.env

reading u-boot.img

reading u-boot.img

reading u-boot.img

reading u-boot.img

U-Boot 2017.05-00001-g041a398 (May 02 2018 - 18:36:57 +0200)

CPU : AM335X-GP rev 2.1

Model: TI AM335x EVM-SK

DRAM: 256 MiB

NAND: 0 MiB

MMC: OMAP SD/MMC: 0, OMAP SD/MMC: 1

reading uboot.env

ERROR: No USB device found

at drivers/usb/gadget/ether.c:2709/usb_ether_init()

Net: CACHE: Misaligned operation at range [8df323c0, 8df32464]

Warning: ethernet@4a100000 using MAC address from ROM

eth0: ethernet@4a100000

Hit any key to stop autoboot: 0

reading zImage

3412752 bytes read in 251 ms (13 MiB/s)

reading dtb

39733 bytes read in 12 ms (3.2 MiB/s)

## Flattened Device Tree blob at 82000000

Booting using the fdt blob at 0x82000000

Loading Device Tree to 8df19000, end 8df25b34 ... OK

Starting kernel ...

[    0.000000] Booting Linux on physical CPU 0x0
[    0.000000] Initializing cgroup subsys cpu
[    0.000000] Initializing cgroup subsys cpuacct
[    0.000000] Linux version 4.4.19-ge581bb1cac (polycaptil@polycaptil-HP-Notebook) (gcc version 5.3.0 (GCC) ) #1 PREEMPT Thu May 24 11:42:17 CEST 2018
[    0.000000] CPU: ARMv7 Processor [413fc082] revision 2 (ARMv7), cr=10c5387d
[    0.000000] CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instruction cache
[    0.000000] Machine model: TI AM335x EVM-SK
[    0.000000] cma: Reserved 48 MiB at 0x8a800000
[    0.000000] Memory policy: Data cache writeback
[    0.000000] CPU: All CPU(s) started in SVC mode.
[    0.000000] AM335X ES2.1 (sgx neon )
[    0.000000] Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 64960
[    0.000000] Kernel command line: console=ttyO0,115200 root=/dev/mmcblk0p3 rw
[    0.000000] PID hash table entries: 1024 (order: 0, 4096 bytes)
[    0.000000] Dentry cache hash table entries: 32768 (order: 5, 131072 bytes)
[    0.000000] Inode-cache hash table entries: 16384 (order: 4, 65536 bytes)
[    0.000000] Memory: 200444K/262144K available (6495K kernel code, 313K rwdata, 2368K rodata, 260K init, 265K bss, 12548K reserved, 49152K cma-reserved, 0K highmem)
[    0.000000] Virtual kernel memory layout:
[    0.000000]     vector  : 0xffff0000 - 0xffff1000   (   4 kB)
[    0.000000]     fixmap  : 0xffc00000 - 0xfff00000   (3072 kB)
[    0.000000]     vmalloc : 0xd0800000 - 0xff800000   ( 752 MB)
[    0.000000]     lowmem  : 0xc0000000 - 0xd0000000   ( 256 MB)
[    0.000000]     pkmap   : 0xbfe00000 - 0xc0000000   (   2 MB)
[    0.000000]     modules : 0xbf000000 - 0xbfe00000   (  14 MB)
[    0.000000]       .text : 0xc0008000 - 0xc08b0034   (8865 kB)
[    0.000000]       .init : 0xc08b1000 - 0xc08f2000   ( 260 kB)
[    0.000000]       .data : 0xc08f2000 - 0xc09407f0   ( 314 kB)
[    0.000000]        .bss : 0xc09407f0 - 0xc0982d58   ( 266 kB)
[    0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=1, Nodes=1
[    0.000000] Preemptible hierarchical RCU implementation.
[    0.000000]  Build-time adjustment of leaf fanout to 32.
[    0.000000] NR_IRQS:16 nr_irqs:16 16
[    0.000000] IRQ: Found an INTC at 0xfa200000 (revision 5.0) with 128 interrupts
[    0.000000] OMAP clockevent source: timer2 at 24000000 Hz
[    0.000015] sched_clock: 32 bits at 24MHz, resolution 41ns, wraps every 89478484971ns
[    0.000036] clocksource: timer1: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 79635851949 ns
[    0.000047] OMAP clocksource: timer1 at 24000000 Hz
[    0.000222] clocksource_probe: no matching clocksources found
[    0.000415] Console: colour dummy device 80x30
[    0.000442] WARNING: Your 'console=ttyO0' has been replaced by 'ttyS0'
[    0.000448] This ensures that you still see kernel messages. Please
[    0.000454] update your kernel commandline.
[    0.000473] Calibrating delay loop... 795.44 BogoMIPS (lpj=3977216)
[    0.089064] pid_max: default: 32768 minimum: 301
[    0.089193] Mount-cache hash table entries: 1024 (order: 0, 4096 bytes)
[    0.089205] Mountpoint-cache hash table entries: 1024 (order: 0, 4096 bytes)
[    0.089932] Initializing cgroup subsys io
[    0.089964] Initializing cgroup subsys memory
[    0.090005] Initializing cgroup subsys devices
[    0.090021] Initializing cgroup subsys freezer
[    0.090036] Initializing cgroup subsys perf_event
[    0.090048] Initializing cgroup subsys pids
[    0.090078] CPU: Testing write buffer coherency: ok
[    0.090499] Setting up static identity map for 0x80008200 - 0x80008258
[    0.092680] devtmpfs: initialized
[    0.105440] VFP support v0.3: implementor 41 architecture 3 part 30 variant c rev 3
[    0.120529] omap_hwmod: debugss: _wait_target_disable failed
[    0.175584] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns
[    0.179852] pinctrl core: initialized pinctrl subsystem
[    0.181216] NET: Registered protocol family 16
[    0.183420] DMA: preallocated 256 KiB pool for atomic coherent allocations
[    0.209061] cpuidle: using governor ladder
[    0.239048] cpuidle: using governor menu
[    0.243661] OMAP GPIO hardware version 0.1
[    0.254360] hw-breakpoint: debug architecture 0x4 unsupported.
[    0.297629] edma 49000000.edma: TI EDMA DMA engine driver
[    0.298606] reg-fixed-voltage fixedregulator@2: could not find pctldev for node /ocp/l4_wkup@44c00000/scm@210000/pinmux@800/pinmux_wl12xx_gpio, deferring probe
[    0.302364] omap_i2c 44e0b000.i2c: could not find pctldev for node /ocp/l4_wkup@44c00000/scm@210000/pinmux@800/pinmux_i2c0_pins, deferring probe
[    0.302525] media: Linux media interface: v0.10
[    0.302588] Linux video capture interface: v2.00
[    0.302638] pps_core: LinuxPPS API ver. 1 registered
[    0.302646] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <[email protected] <mailto:[email protected]> >
[    0.302676] PTP clock support registered
[    0.302741] EDAC MC: Ver: 3.0.0
[    0.303966] omap-mailbox 480c8000.mailbox: omap mailbox rev 0x400
[    0.304332] Advanced Linux Sound Architecture Driver Initialized.
[    0.305512] clocksource: Switched to clocksource timer1
[    0.316775] NET: Registered protocol family 2
[    0.317599] TCP established hash table entries: 2048 (order: 1, 8192 bytes)
[    0.317636] TCP bind hash table entries: 2048 (order: 1, 8192 bytes)
[    0.317663] TCP: Hash tables configured (established 2048 bind 2048)
[    0.317748] UDP hash table entries: 256 (order: 0, 4096 bytes)
[    0.317767] UDP-Lite hash table entries: 256 (order: 0, 4096 bytes)
[    0.317925] NET: Registered protocol family 1
[    0.318352] RPC: Registered named UNIX socket transport module.
[    0.318366] RPC: Registered udp transport module.
[    0.318372] RPC: Registered tcp transport module.
[    0.318379] RPC: Registered tcp NFSv4.1 backchannel transport module.
[    0.319330] hw perfevents: enabled with armv7_cortex_a8 PMU driver, 5 counters available
[    0.321392] futex hash table entries: 256 (order: -1, 3072 bytes)
[    0.329780] squashfs: version 4.0 (2009/01/31) Phillip Lougher
[    0.330717] NFS: Registering the id_resolver key type
[    0.330798] Key type id_resolver registered
[    0.330807] Key type id_legacy registered
[    0.330886] ntfs: driver 2.1.32 [Flags: R/O].
[    0.334673] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 248)
[    0.334706] io scheduler noop registered
[    0.334719] io scheduler deadline registered
[    0.334877] io scheduler cfq registered (default)
[    0.336555] pinctrl-single 44e10800.pinmux: 142 pins at pa f9e10800 size 568
[    0.339415] backlight supply power not found, using dummy regulator
[    0.402480] Serial: 8250/16550 driver, 10 ports, IRQ sharing disabled
[    0.406962] 44e09000.serial: ttyS0 at MMIO 0x44e09000 (irq = 158, base_baud = 3000000) is a 8250
[    1.017357] console [ttyS0] enabled
[    1.022206] 48022000.serial: ttyS1 at MMIO 0x48022000 (irq = 159, base_baud = 3000000) is a 8250
[    1.032273] [drm] Initialized drm 1.1.0 20060810
[    1.039564] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
[    1.046349] [drm] No driver support for vblank timestamp query.
[    1.062121] Console: switching to colour frame buffer device 60x34
[    1.070360] tilcdc 4830e000.lcdc: fb0:  frame buffer device
[    1.105531] [drm] Initialized tilcdc 1.0.0 20121205 on minor 0
[    1.118644] loop: module loaded
[    1.124253] libphy: Fixed MDIO Bus: probed
[    1.185550] davinci_mdio 4a101000.mdio: davinci mdio revision 1.6
[    1.191695] davinci_mdio 4a101000.mdio: detected phy mask fffffffe
[    1.198786] libphy: 4a101000.mdio: probed
[    1.202886] davinci_mdio 4a101000.mdio: phy[0]: device 4a101000.mdio:00, driver SMSC LAN8710/LAN8720
[    1.212890] cpsw 4a100000.ethernet: Detected MACID = a0:f6:fd:4c:a6:ba
[    1.220531] cpsw 4a100000.ethernet: cpsw: Detected MACID = c4:ed:ba:88:2a:92
[    1.229382] mousedev: PS/2 mouse device common for all mice
[    1.235845] i2c /dev entries driver
[    1.240508] cpuidle: enable-method property 'ti,am3352' found operations
[    1.248197] omap_hsmmc 48060000.mmc: Got CD GPIO
[    1.275713] pinctrl-single 44e10800.pinmux: bad data for mux pinmux_mmc2_pins
[    1.282895] pinctrl-single 44e10800.pinmux: no pins entries for pinmux_mmc2_pins
[    1.317159] ledtrig-cpu: registered to indicate activity on CPUs
[    1.326069] NET: Registered protocol family 10
[    1.332092] sit: IPv6 over IPv4 tunneling driver
[    1.337715] NET: Registered protocol family 17
[    1.342510] Key type dns_resolver registered
[    1.347095] omap_voltage_late_init: Voltage driver support not added
[    1.407145] tps65910-rtc tps65910-rtc: rtc core: registered tps65910-rtc as rtc0
[    1.415278] omap_i2c 44e0b000.i2c: bus 0 rev0.11 at 400 kHz
[    1.421665] omap_hsmmc 48060000.mmc: Got CD GPIO
[    1.426813] vmmc: supplied by vbat
[    1.466341] pinctrl-single 44e10800.pinmux: bad data for mux pinmux_mmc2_pins
[    1.474737] pinctrl-single 44e10800.pinmux: no pins entries for pinmux_mmc2_pins
[    1.513247] mmc0: host does not support reading read-only switch, assuming write-enable
[    1.523414] mmc0: new high speed SDHC card at address 0001
[    1.529635] mmcblk0: mmc0:0001 AS 3.72 GiB
[    1.535996]  mmcblk0: p1 p2 p3
[    1.595932] vdd_mpu: supplied by vbat
[    1.602167] input: gpio_buttons@0 as /devices/platform/gpio_buttons@0/input/input0
[    1.618291] tps65910-rtc tps65910-rtc: setting system clock to 2019-02-01 20:07:49 UTC (1549051669)
[    1.639394] lis3_reg: disabling
[    1.655732] ALSA device list:
[    1.658720]   No soundcards found.
[    1.678290] EXT4-fs (mmcblk0p3): couldn't mount as ext3 due to feature incompatibilities
[    1.696920] EXT4-fs (mmcblk0p3): couldn't mount as ext2 due to feature incompatibilities
[    2.183999] EXT4-fs (mmcblk0p3): recovery complete
[    2.196864] EXT4-fs (mmcblk0p3): mounted filesystem with ordered data mode. Opts: (null)
[    2.205084] VFS: Mounted root (ext4 filesystem) on device 179:3.
[    2.225670] devtmpfs: mounted
[    2.235781] Freeing unused kernel memory: 260K (c08b1000 - c08f2000)
[    2.242162] This architecture does not have kernel memory protection.

INIT: version 2.88 booting

Starting udev

[    3.090091] udevd[78]: starting version 3.2.5
[    3.106175] random: udevd: uninitialized urandom read (16 bytes read, 26 bits of entropy available)
[    3.118667] random: udevd: uninitialized urandom read (16 bytes read, 26 bits of entropy available)
[    3.128014] random: udevd: uninitialized urandom read (16 bytes read, 26 bits of entropy available)
[    3.137335] random: udevd: uninitialized urandom read (16 bytes read, 26 bits of entropy available)
[    3.218433] udevd[79]: starting eudev-3.2.5
[    3.325886] random: udevd: uninitialized urandom read (16 bytes read, 29 bits of entropy available)
[    3.346155] random: udevd: uninitialized urandom read (16 bytes read, 29 bits of entropy available)
[    4.820708] EXT4-fs (mmcblk0p3): re-mounted. Opts: data=ordered
[    5.548283] random: dd: uninitialized urandom read (512 bytes read, 43 bits of entropy available)

INIT: Entering runlevel: 5

Configuring network interfaces... [ 5.820546] net eth0: initializing cpsw version 1.12 (0)

[    5.825987] net eth0: initialized cpsw ale version 1.4
[    5.831150] net eth0: ALE Table size 1024
[    5.838581] net eth0: phy found : id is : 0x7c0f1
[    5.851838] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
[    9.896392] cpsw 4a100000.ethernet eth0: Link is Up - 100Mbps/Full - flow control rx/tx
[    9.904635] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready

chown: unrecognized option '--reference=/etc/resolv.conf'

BusyBox v1.27.2 (2018-11-05 21:16:09 UTC) multi-call binary.

Usage: chown [-Rh]... USER[:[GRP]] FILE...

chmod: unrecognized option '--reference=/etc/resolv.conf'

BusyBox v1.27.2 (2018-11-05 21:16:09 UTC) multi-call binary.

Usage: chmod [-R] MODE[,MODE]... FILE...

done.

Starting system message bus: [ 14.887099] random: dbus-daemon: uninitialized urandom read (12 bytes read, 62 bits of entropy available)

[   14.912318] random: dbus-daemon: uninitialized urandom read (12 bytes read, 62 bits of entropy available)

dbus.

Starting OpenBSD Secure Shell server: sshd

[   15.393971] random: sshd: uninitialized urandom read (32 bytes read, 65 bits of entropy available)

done.

Starting Xserver

Starting DHCP server:

.

starting DNS forwarder and DHCP server: dnsmasq...

X.Org X Server 1.19.6

Release Date: 2017-12-20

X Protocol Version 11, Revision 0

Build Operating System: Linux 4.15.0-38-generic x86_64

Current Operating System: Linux polycaptil-machine-am335x-evmsk 4.4.19-ge581bb1cac #1 PREEMPT Thu May 24 11:42:17 CEST 2018 armv7l

Kernel command line: console=ttyO0,115200 root=/dev/mmcblk0p3 rw

Build Date: 05 November 2018 09:33:21PM

Current version of pixman: 0.34.0

Before reporting problems, check http://wiki.x.org

to make sure that you have the latest version.

Markers: (--) probed, (**) from config file, (==) default setting,

(++) from command line, (!!) notice, (II) informational,

(WW) warning, (EE) error, (NI) not implemented, (??) unknown.

(==) Log file: "/var/log/Xorg.0.log", Time: Fri Feb 1 20:08:02 2019

(==) Using config file: "/etc/X11/xorg.conf"

(==) Using system config directory "/usr/share/X11/xorg.conf.d"

done.

Starting HOSTAP Daemon: Configuration file: /etc/hostapd.conf

nl80211: 'nl80211' generic netlink not found

Failed to initialize driver 'nl80211'

wlan0: interface state UNINITIALIZED->DISABLED

wlan0: AP-DISABLED

hostapd_free_hapd_data: Interface wlan0 wasn't started

Starting ntpd: done

Starting syslogd/klogd: done

Starting crond: OK

Poky (Yocto Project Reference Distro) 2.5
polycaptil-machine-am335x-evmsk /dev/ttyS0

polycaptil-machine-am335x-evmsk login: D-BUS per-session daemon address is:
unix:abstract=/tmp/dbus-07WuJSySeb,guid=a3e41f2692316c19766e95535c54a7 25

Size 1024x768 not found in available modes

Error: No calibratable devices found.

matchbox: Cant find a keycode for keysym 269025056

matchbox: ignoring key shortcut XF86Calendar=!$contacts

matchbox: Cant find a keycode for keysym 2809

matchbox: ignoring key shortcut telephone=!$dates

matchbox: Cant find a keycode for keysym 269025050

matchbox: ignoring key shortcut XF86Start=!matchbox-remote -desktop

dbus-daemon[358]: Activating service name='org.a11y.atspi.Registry' requested by ':1.0' (uid=0 pid=354 comm="matchbox-terminal ")

dbus-daemon[358]: Successfully activated service 'org.a11y.atspi.Registry'

SpiRegistry daemon is running with well-known name - org.a11y.atspi.Registry

[   30.662697] random: nonblocking pool is initialized

Poky (Yocto Project Reference Distro) 2.5
polycaptil-machine-am335x-evmsk /dev/ttyS0

Thank’s to take time to read my message.

N.Stanisavljevic

--
_______________________________________________
yocto mailing list
[email protected] <mailto:[email protected]>
https://lists.yoctoproject.org/listinfo/yocto

#8 lore raw
In reply to Zoran Stojsavljevic

Hello Zoran,

I keep you in touch about the migration from sumo to thud to solve my problem of locked touchscreen.

I migrated from sumo to thud version, but nothing changed, the problem is the same, and I have same messages on boot as sumo version.

I looked that the x server have a configuration kernel command line (if I correctly understood), here is what is written :

Kernel command line: console=ttyO0,115200 root=/dev/mmcblk0p2 rw

But the kernel command line of poky is different, here is what is configured for poky kernel command line :

Poky (Yocto Project Reference Distro) 2.6.1 am335x-evm /dev/ttyS0

For the xserver it is ttyO0 and for poky it is ttyS0, maybe there is something wrong here which do problem for the touchscreen.

I put below (at end of this mail )the text which appear during the boot.

I think xorg-x11-server package 1.20.3 was not the problem in the previous yocto version (sumo)…

Best regards

Nikola

Here is the text that appear during the boot :

root@am335x-evm:~# CCCCCCCCCCCCCCCCCCCCCCCC

U-Boot SPL 2017.05-00001-g041a398 (May 02 2018 - 18:36:57)

Trying to boot from MMC1

reading uboot.env

reading u-boot.img

reading u-boot.img

reading u-boot.img

reading u-boot.img

U-Boot 2017.05-00001-g041a398 (May 02 2018 - 18:36:57 +0200)

CPU : AM335X-GP rev 2.1

Model: TI AM335x EVM-SK

DRAM: 256 MiB

NAND: 0 MiB

MMC: OMAP SD/MMC: 0, OMAP SD/MMC: 1

reading uboot.env

ERROR: No USB device found

at drivers/usb/gadget/ether.c:2709/usb_ether_init()

Net: CACHE: Misaligned operation at range [8df323c0, 8df32464]

Warning: ethernet@4a100000 using MAC address from ROM

eth0: ethernet@4a100000

Hit any key to stop autoboot: 0

reading zImage

3412752 bytes read in 252 ms (12.9 MiB/s)

reading dtb

39733 bytes read in 12 ms (3.2 MiB/s)

## Flattened Device Tree blob at 82000000

Booting using the fdt blob at 0x82000000

Loading Device Tree to 8df19000, end 8df25b34 ... OK

Starting kernel ...

[    0.000000] Booting Linux on physical CPU 0x0
[    0.000000] Initializing cgroup subsys cpu
[    0.000000] Initializing cgroup subsys cpuacct
[    0.000000] Linux version 4.4.19-ge581bb1cac (polycaptil@polycaptil-HP-Notebook) (gcc version 5.3.0 (GCC) ) #1 PREEMPT Thu May 24 11:42:17 CEST 2018
[    0.000000] CPU: ARMv7 Processor [413fc082] revision 2 (ARMv7), cr=10c5387d
[    0.000000] CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instruction cache
[    0.000000] Machine model: TI AM335x EVM-SK
[    0.000000] cma: Reserved 48 MiB at 0x8a800000
[    0.000000] Memory policy: Data cache writeback
[    0.000000] CPU: All CPU(s) started in SVC mode.
[    0.000000] AM335X ES2.1 (sgx neon )
[    0.000000] Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 64960
[    0.000000] Kernel command line: console=ttyO0,115200 root=/dev/mmcblk0p2 rw
[    0.000000] PID hash table entries: 1024 (order: 0, 4096 bytes)
[    0.000000] Dentry cache hash table entries: 32768 (order: 5, 131072 bytes)
[    0.000000] Inode-cache hash table entries: 16384 (order: 4, 65536 bytes)
[    0.000000] Memory: 200444K/262144K available (6495K kernel code, 313K rwdata, 2368K rodata, 260K init, 265K bss, 12548K reserved, 49152K cma-reserved, 0K highmem)
[    0.000000] Virtual kernel memory layout:
[    0.000000]     vector  : 0xffff0000 - 0xffff1000   (   4 kB)
[    0.000000]     fixmap  : 0xffc00000 - 0xfff00000   (3072 kB)
[    0.000000]     vmalloc : 0xd0800000 - 0xff800000   ( 752 MB)
[    0.000000]     lowmem  : 0xc0000000 - 0xd0000000   ( 256 MB)
[    0.000000]     pkmap   : 0xbfe00000 - 0xc0000000   (   2 MB)
[    0.000000]     modules : 0xbf000000 - 0xbfe00000   (  14 MB)
[    0.000000]       .text : 0xc0008000 - 0xc08b0034   (8865 kB)
[    0.000000]       .init : 0xc08b1000 - 0xc08f2000   ( 260 kB)
[    0.000000]       .data : 0xc08f2000 - 0xc09407f0   ( 314 kB)
[    0.000000]        .bss : 0xc09407f0 - 0xc0982d58   ( 266 kB)
[    0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=1, Nodes=1
[    0.000000] Preemptible hierarchical RCU implementation.
[    0.000000]  Build-time adjustment of leaf fanout to 32.
[    0.000000] NR_IRQS:16 nr_irqs:16 16
[    0.000000] IRQ: Found an INTC at 0xfa200000 (revision 5.0) with 128 interrupts
[    0.000000] OMAP clockevent source: timer2 at 24000000 Hz
[    0.000016] sched_clock: 32 bits at 24MHz, resolution 41ns, wraps every 89478484971ns
[    0.000036] clocksource: timer1: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 79635851949 ns
[    0.000047] OMAP clocksource: timer1 at 24000000 Hz
[    0.000222] clocksource_probe: no matching clocksources found
[    0.000415] Console: colour dummy device 80x30
[    0.000441] WARNING: Your 'console=ttyO0' has been replaced by 'ttyS0'
[    0.000447] This ensures that you still see kernel messages. Please
[    0.000453] update your kernel commandline.
[    0.000473] Calibrating delay loop... 795.44 BogoMIPS (lpj=3977216)
[    0.089067] pid_max: default: 32768 minimum: 301
[    0.089198] Mount-cache hash table entries: 1024 (order: 0, 4096 bytes)
[    0.089210] Mountpoint-cache hash table entries: 1024 (order: 0, 4096 bytes)
[    0.089932] Initializing cgroup subsys io
[    0.089965] Initializing cgroup subsys memory
[    0.090003] Initializing cgroup subsys devices
[    0.090020] Initializing cgroup subsys freezer
[    0.090035] Initializing cgroup subsys perf_event
[    0.090047] Initializing cgroup subsys pids
[    0.090074] CPU: Testing write buffer coherency: ok
[    0.090499] Setting up static identity map for 0x80008200 - 0x80008258
[    0.092669] devtmpfs: initialized
[    0.105440] VFP support v0.3: implementor 41 architecture 3 part 30 variant c rev 3
[    0.120496] omap_hwmod: debugss: _wait_target_disable failed
[    0.175552] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns
[    0.179889] pinctrl core: initialized pinctrl subsystem
[    0.181246] NET: Registered protocol family 16
[    0.183446] DMA: preallocated 256 KiB pool for atomic coherent allocations
[    0.209067] cpuidle: using governor ladder
[    0.239055] cpuidle: using governor menu
[    0.243662] OMAP GPIO hardware version 0.1
[    0.254349] hw-breakpoint: debug architecture 0x4 unsupported.
[    0.297650] edma 49000000.edma: TI EDMA DMA engine driver
[    0.298630] reg-fixed-voltage fixedregulator@2: could not find pctldev for node /ocp/l4_wkup@44c00000/scm@210000/pinmux@800/pinmux_wl12xx_gpio, deferring probe
[    0.302384] omap_i2c 44e0b000.i2c: could not find pctldev for node /ocp/l4_wkup@44c00000/scm@210000/pinmux@800/pinmux_i2c0_pins, deferring probe
[    0.302543] media: Linux media interface: v0.10
[    0.302609] Linux video capture interface: v2.00
[    0.302660] pps_core: LinuxPPS API ver. 1 registered
[    0.302668] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <[email protected] <mailto:[email protected]> >
[    0.302699] PTP clock support registered
[    0.302764] EDAC MC: Ver: 3.0.0
[    0.303981] omap-mailbox 480c8000.mailbox: omap mailbox rev 0x400
[    0.304343] Advanced Linux Sound Architecture Driver Initialized.
[    0.305508] clocksource: Switched to clocksource timer1
[    0.316757] NET: Registered protocol family 2
[    0.317569] TCP established hash table entries: 2048 (order: 1, 8192 bytes)
[    0.317608] TCP bind hash table entries: 2048 (order: 1, 8192 bytes)
[    0.317636] TCP: Hash tables configured (established 2048 bind 2048)
[    0.317718] UDP hash table entries: 256 (order: 0, 4096 bytes)
[    0.317738] UDP-Lite hash table entries: 256 (order: 0, 4096 bytes)
[    0.317898] NET: Registered protocol family 1
[    0.318323] RPC: Registered named UNIX socket transport module.
[    0.318337] RPC: Registered udp transport module.
[    0.318344] RPC: Registered tcp transport module.
[    0.318350] RPC: Registered tcp NFSv4.1 backchannel transport module.
[    0.319303] hw perfevents: enabled with armv7_cortex_a8 PMU driver, 5 counters available
[    0.321370] futex hash table entries: 256 (order: -1, 3072 bytes)
[    0.329774] squashfs: version 4.0 (2009/01/31) Phillip Lougher
[    0.330714] NFS: Registering the id_resolver key type
[    0.330792] Key type id_resolver registered
[    0.330801] Key type id_legacy registered
[    0.330881] ntfs: driver 2.1.32 [Flags: R/O].
[    0.334651] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 248)
[    0.334684] io scheduler noop registered
[    0.334698] io scheduler deadline registered
[    0.334855] io scheduler cfq registered (default)
[    0.336527] pinctrl-single 44e10800.pinmux: 142 pins at pa f9e10800 size 568
[    0.339377] backlight supply power not found, using dummy regulator
[    0.402495] Serial: 8250/16550 driver, 10 ports, IRQ sharing disabled
[    0.406968] 44e09000.serial: ttyS0 at MMIO 0x44e09000 (irq = 158, base_baud = 3000000) is a 8250
[    1.017361] console [ttyS0] enabled
[    1.022188] 48022000.serial: ttyS1 at MMIO 0x48022000 (irq = 159, base_baud = 3000000) is a 8250
[    1.032233] [drm] Initialized drm 1.1.0 20060810
[    1.039551] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
[    1.046337] [drm] No driver support for vblank timestamp query.
[    1.062083] Console: switching to colour frame buffer device 60x34
[    1.070316] tilcdc 4830e000.lcdc: fb0:  frame buffer device
[    1.105532] [drm] Initialized tilcdc 1.0.0 20121205 on minor 0
[    1.118602] loop: module loaded
[    1.124221] libphy: Fixed MDIO Bus: probed
[    1.185547] davinci_mdio 4a101000.mdio: davinci mdio revision 1.6
[    1.191690] davinci_mdio 4a101000.mdio: detected phy mask fffffffe
[    1.198754] libphy: 4a101000.mdio: probed
[    1.202851] davinci_mdio 4a101000.mdio: phy[0]: device 4a101000.mdio:00, driver SMSC LAN8710/LAN8720
[    1.212830] cpsw 4a100000.ethernet: Detected MACID = a0:f6:fd:4c:a6:ba
[    1.220461] cpsw 4a100000.ethernet: cpsw: Detected MACID = c4:ed:ba:88:2a:92
[    1.229313] mousedev: PS/2 mouse device common for all mice
[    1.235792] i2c /dev entries driver
[    1.240448] cpuidle: enable-method property 'ti,am3352' found operations
[    1.248143] omap_hsmmc 48060000.mmc: Got CD GPIO
[    1.275713] pinctrl-single 44e10800.pinmux: bad data for mux pinmux_mmc2_pins
[    1.282895] pinctrl-single 44e10800.pinmux: no pins entries for pinmux_mmc2_pins
[    1.317167] ledtrig-cpu: registered to indicate activity on CPUs
[    1.326065] NET: Registered protocol family 10
[    1.332086] sit: IPv6 over IPv4 tunneling driver
[    1.337713] NET: Registered protocol family 17
[    1.342528] Key type dns_resolver registered
[    1.347114] omap_voltage_late_init: Voltage driver support not added
[    1.407191] tps65910-rtc tps65910-rtc: rtc core: registered tps65910-rtc as rtc0
[    1.415327] omap_i2c 44e0b000.i2c: bus 0 rev0.11 at 400 kHz
[    1.421710] omap_hsmmc 48060000.mmc: Got CD GPIO
[    1.426857] vmmc: supplied by vbat
[    1.466348] pinctrl-single 44e10800.pinmux: bad data for mux pinmux_mmc2_pins
[    1.474748] pinctrl-single 44e10800.pinmux: no pins entries for pinmux_mmc2_pins
[    1.513242] mmc0: host does not support reading read-only switch, assuming write-enable
[    1.523406] mmc0: new high speed SDHC card at address 0001
[    1.529619] mmcblk0: mmc0:0001 AS 3.72 GiB
[    1.535970]  mmcblk0: p1 p2 p3
[    1.595927] vdd_mpu: supplied by vbat
[    1.602118] input: gpio_buttons@0 as /devices/platform/gpio_buttons@0/input/input0
[    1.618310] tps65910-rtc tps65910-rtc: setting system clock to 2019-04-03 08:25:12 UTC (1554279912)
[    1.639397] lis3_reg: disabling
[    1.655734] ALSA device list:
[    1.658723]   No soundcards found.
[    1.678283] EXT4-fs (mmcblk0p2): couldn't mount as ext3 due to feature incompatibilities
[    1.696903] EXT4-fs (mmcblk0p2): couldn't mount as ext2 due to feature incompatibilities
[    1.792693] EXT4-fs (mmcblk0p2): recovery complete
[    1.807446] EXT4-fs (mmcblk0p2): mounted filesystem with ordered data mode. Opts: (null)
[    1.821463] VFS: Mounted root (ext4 filesystem) on device 179:2.
[    1.835669] devtmpfs: mounted
[    1.839073] Freeing unused kernel memory: 260K (c08b1000 - c08f2000)
[    1.851956] This architecture does not have kernel memory protection.

INIT: version 2.88 booting

Starting udev

[    2.513624] udevd[78]: starting version 3.2.5
[    2.527632] random: udevd: uninitialized urandom read (16 bytes read, 18 bits of entropy available)
[    2.546992] random: udevd: uninitialized urandom read (16 bytes read, 18 bits of entropy available)
[    2.566829] random: udevd: uninitialized urandom read (16 bytes read, 18 bits of entropy available)
[    2.585755] random: udevd: uninitialized urandom read (16 bytes read, 18 bits of entropy available)
[    2.668211] udevd[79]: starting eudev-3.2.5
[    3.036159] random: udevd: uninitialized urandom read (16 bytes read, 21 bits of entropy available)
[    3.061761] random: udevd: uninitialized urandom read (16 bytes read, 21 bits of entropy available)
[    4.494682] EXT4-fs (mmcblk0p2): re-mounted. Opts: data=ordered
[    5.052098] random: dd: uninitialized urandom read (512 bytes read, 34 bits of entropy available)

INIT: Entering runlevel: 5

Configuring network interfaces... [ 5.254308] net eth0: initializing cpsw version 1.12 (0)

[    5.259812] net eth0: initialized cpsw ale version 1.4
[    5.264976] net eth0: ALE Table size 1024
[    5.272411] net eth0: phy found : id is : 0x7c0f1
[    5.285702] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready

udhcpc: started, v1.29.2

udhcpc: sending discover

udhcpc: sending discover

udhcpc: sending discover

udhcpc: no lease, forking to background

done.

Starting system message bus: [ 14.793334] random: dbus-daemon: uninitialized urandom read (12 bytes read, 51 bits of entropy available)

[   14.831748] random: dbus-daemon: uninitialized urandom read (12 bytes read, 52 bits of entropy available)

dbus.

Starting Xserver

Starting syslogd/klogd:

done

X.Org X Server 1.20.1

X Protocol Version 11, Revision 0

Build Operating System: Linux 4.15.0-45-generic x86_64

Current Operating System: Linux am335x-evm 4.4.19-ge581bb1cac #1 PREEMPT Thu May 24 11:42:17 CEST 2018 armv7l

Kernel command line: console=ttyO0,115200 root=/dev/mmcblk0p2 rw

Build Date: 02 April 2019 07:35:10PM

Current version of pixman: 0.34.0

Before reporting problems, check http://wiki.x.org

to make sure that you have the latest version.

Markers: (--) probed, (**) from config file, (==) default setting,

(++) from command line, (!!) notice, (II) informational,

(WW) warning, (EE) error, (NI) not implemented, (??) unknown.

(==) Log file: "/var/log/Xorg.0.log", Time: Wed Apr 3 08:25:25 2019

(==) Using config file: "/etc/X11/xorg.conf"

(==) Using system config directory "/usr/share/X11/xorg.conf.d"

Poky (Yocto Project Reference Distro) 2.6.1 am335x-evm /dev/ttyS0

am335x-evm login: The XKEYBOARD keymap compiler (xkbcomp) reports:

Quoted 5 lines

Warning: Unsupported high keycode 372 for name <I372> ignored

X11 cannot support keycodes above 255.

This warning only shows for the first high keycode.

Errors from xkbcomp are not fatal to the X server

[   15.888959] random: dbus-daemon: uninitialized urandom read (12 bytes read, 65 bits of entropy available)

D-BUS per-session daemon address is: unix:abstract=/tmp/dbus-JjEW6Wgjtx,guid=87af020e5c6f1a7e21d449e55ca46df5

Size 1024x768 not found in available modes

Error: No calibratable devices found.

matchbox: Cant find a keycode for keysym 269025056

matchbox: ignoring key shortcut XF86Calendar=!$contacts

matchbox: Cant find a keycode for keysym 2809

matchbox: ignoring key shortcut telephone=!$dates

matchbox: Cant find a keycode for keysym 269025050

matchbox: ignoring key shortcut XF86Start=!matchbox-remote -desktop

Failed to launch bus: Failed to execute child process ?/usr/bin? (Permission denied)

(matchbox-terminal:274): dbind-WARNING **: 08:25:27.404: Error retrieving accessibility bus address: org.a11y.Bus.Error: Failed to execute child process ?/usr/bin? (Permission denied)

[   43.718127] random: nonblocking pool is initialized

De : Stanisavljevic <[email protected]>
Envoyé : lundi 18 février 2019 15:27
À : 'Zoran Stojsavljevic' <[email protected]>
Cc : 'Yocto Project' <[email protected]>; 'Marc Ferland' <[email protected]> Objet : RE: [yocto] yocto touchscreen

Hello Zoran

I will try these 2 ways.

Of course, the second way is the easiest, but I will try also the first way only to see if it is possible.

I will keep you in touch if the first way can work.

Best regards,

Nikola

De : Zoran Stojsavljevic < <mailto:[email protected]> [email protected]>
Envoyé : lundi 18 février 2019 15:21
À : Stanisavljevic < <mailto:[email protected]> [email protected]>
Cc : Yocto Project < <mailto:[email protected]> [email protected]>; Marc Ferland < <mailto:[email protected]> [email protected]> Objet : Re: [yocto] yocto touchscreen

Hello Nikola,

Two things, which immediately came to my mind:

[1 - Harder way] Either to change xorg-x11-server in sumo to match at least xorg-x11-server 1.20.3;

(harder way, since few people know exact dependencies among various GFX packages, and what

and how many packages need to be also changed to make xorg-x11-server 1.20.3 to work)

[2 - Easier Way] Either to migrate YOCTO to Thud, where the correct xorg-x11-server package 1.20.3

is already fixed and set!

(easier way, since exact dependencies among various GFX packages are already set for 1.20.3)

Best Regards,

Zoran

_______

On Mon, Feb 18, 2019 at 2:48 PM Stanisavljevic < <mailto:[email protected]> [email protected]> wrote:

Thank you Zoran for trying to help me.
I tried to resolve the problem, but I didn’t succeed yet, I think I will to continue, and If after some time I find nothing, I’m going to migrate to the thud version.

I will maybe try to use Bugzilla

Nikola

De : Zoran Stojsavljevic < <mailto:[email protected]> [email protected]>
Envoyé : mardi 5 février 2019 19:28
À : Stanisavljevic < <mailto:[email protected]> [email protected]>
Cc : Yocto Project < <mailto:[email protected]> [email protected]>; <mailto:[email protected]> [email protected] Objet : Re: [yocto] yocto touchscreen

Hello Nikola,

Let us try to cut to the chase!

After reading what Marc Ferland says/writes, and looking into the following:
<https://bugzilla.redhat.com/show_bug.cgi?id=1650634> https://bugzilla.redhat.com/show_bug.cgi?id=1650634

I have spotted the following:

Pat Riehecky 2018-11-20 14:28:22 UTC

the bug remains with the elrepo kernels:
kernel-ml-4.19.2-1.el7.elrepo.x86_64
kernel-lt-4.4.163-1.el7.elrepo.x86_64

I never had this problem since I do not use Xorg (GFX), rather I only

use serial console from VBox VM from my BBB (pass-through).

Thus, my suggestion for you, to skip the whole mess is to rebuild your

distro in the light of YOCTO Project 2.6.1 (thud 20.0.0.1).

My best guess (then you'll inherit YOCTO kernel 4.20.x with fixed Xorg - X11).

I am using Fedora 29 on my laptop. Also from the bugzilla:

Pat Riehecky 2018-11-20 15:46:11 UTC

Bug resolved by rebuilding xorg-x11-server-1.20.3-1.fc29 [1] for 7.6.

With this in mind it appears to be an Xorg server bug rather than fbdev.

From my HP EliteBook 840 G1 Fedora 29, Xorg.0.log - February 5th, 2019.,

I have the following:

[    26.955] Kernel command line: BOOT_IMAGE=/vmlinuz-4.20.6-200.fc29.x86_64

root=/dev/mapper/fedora-root ro <http://rd.lvm.lv> rd.lvm.lv=fedora/root <http://rd.lvm.lv> rd.lvm.lv=fedora/swap rhgb

quiet LANG=en_US.UTF-8

[    26.955] Build Date: 11 January 2019  12:47:38PM
[    26.955] Build ID: xorg-x11-server 1.20.3-3.fc29
[    26.955] Current version of pixman: 0.34.0

Best Regards,
Zoran
_______

Quoted 696 lines · On Tue, Feb 5, 2019 at 2:49 PM Zoran Stojsavljevic <…

Hello Nikola,

Quoted 5 lines

I created a kernel recipe with a bbappend file, and, I added the same defconfig that I used for krogoth version. The bbappend for kernel recipe concern meta-ti layer. I didn't edited defconfig file in other layers which contain a kernel recipe.

It could be some problem that Sumo does not take your bbappend file into the consideration as placed.

It could be something else, as well.

I have the same issue with my defconfig file for my Thud Beagle Bone Black (BBB) standard board. Every time I recompile my YOCTO for it for different releases, I need to import my specific defconfig. But I use complete different repos for my standard Beagle Bone Black than YOCTO BBB Poky reference distro.

Here is what I use in Thud (my bblayers.conf):

POKY_BBLAYERS_CONF_VERSION = "2"
BBPATH = "${TOPDIR}"
BBFILES ?= ""

BBLAYERS ?= " \
    /home/user/projects2/beaglebone-black/yocto-thud/meta-bbb \
    /home/user/projects2/beaglebone-black/yocto-thud/meta-openembedded/meta-networking \
    /home/user/projects2/beaglebone-black/yocto-thud/meta-openembedded/meta-oe \
    /home/user/projects2/beaglebone-black/yocto-thud/meta-openembedded/meta-python \
    /home/user/projects2/beaglebone-black/yocto-thud/meta-qt5 \
    /home/user/projects2/beaglebone-black/yocto-thud/poky/meta \
    /home/user/projects2/beaglebone-black/yocto-thud/poky/meta-poky"

There, I replace defconfig in this layer: /home/user/projects2/beaglebone-black/yocto-thud/meta-bbb with my own defconfig.

In the directory:
/home/user/projects2/beaglebone-black/yocto-thud/meta-bbb/recipes-kernel/linux/linux-stable-4.19/beaglebone

If you use only Poky repository, then you need to read the following paragraph (how to use your defconfig with Poky):

[2.3.3. Changing the Configuration] YOCTO Project Linux Development Manual
<https://www.yoctoproject.org/docs/2.5/kernel-dev/kernel-dev.html#using-an-in-tree-defconfig-file> https://www.yoctoproject.org/docs/2.5/kernel-dev/kernel-dev.html#using-an-in-tree-defconfig-file
2.3.3. Changing the Configuration

I hope this will help. Please, keep us posted!

Zoran
_______

Quoted 642 lines · On Tue, Feb 5, 2019 at 10:54 AM Stanisavljevic <…

Hy Zoran

Thank's to take time to answer

I created a kernel recipe with a bbappend file, and, I added the same defconfig that I used for krogoth version. The bbappend for kernel recipe concern meta-ti layer.
I didn't edited defconfig file in other layers which contain a kernel recipe.

I think it's a problem which concern the screen resolution, screen frequency and adc touchscreen. Something is different between the krogoth and sumo version, but I didn't find what is changed...

Xrandr show that problem is maybe around the screen resolution.
It's show the next message : "Size 1024x768 not found in available modes"
Maybe it was changed between krogoth and sumo version...but I don't know where it is indicated if sources files...

What do you think ? problem can be around the screen resolution, screen frequency and adc touchscreen ?

Nikola

-----Message d'origine-----
De : Zoran Stojsavljevic < <mailto:[email protected]> [email protected]> Envoyé : lundi 4 février 2019 17:08
À : Stanisavljevic < <mailto:[email protected]> [email protected]> Cc : Yocto Project < <mailto:[email protected]> [email protected]> Objet : Re: [yocto] yocto touchscreen

Quoted 5 lines

I built a first version of this os with version krogoth and it works fine.

Now I build a second version of this os with version sumo and the touch screen works fine during boot process but when kernel is loaded, touchscreen freeze / lock and impossible to use it.

Did you compare Krogoth kernel defconfig with Sumo kernel defconfig?

May there are some mismatches in drivers' setup between these two?

Zoran
_______

Quoted 600 lines · On Mon, Feb 4, 2019 at 12:24 PM Stanisavljevic <…

Hy Team,

I have a problem

I buid a custom os for AM335x processor and I used yocto to do it.

I build a first version of this os with version krogoth and it work fine.

Now I build a second version of this os with version sumo and the touchscreen work fine during boot process but when kernel is loaded, touchscreen freeze / lock and impossible to use it.

The terminal is printed on the touchscreen but the screen is locked, impossible to write a command or to move the mouse to select, ….

Here is the log of boot to the user session (log got with serial communication between PC and board) :

U-Boot SPL 2017.05-00001-g041a398 (May 02 2018 - 18:36:57)

Trying to boot from MMC1

reading uboot.env

reading u-boot.img

reading u-boot.img

reading u-boot.img

reading u-boot.img

U-Boot 2017.05-00001-g041a398 (May 02 2018 - 18:36:57 +0200)

CPU : AM335X-GP rev 2.1

Model: TI AM335x EVM-SK

DRAM: 256 MiB

NAND: 0 MiB

MMC: OMAP SD/MMC: 0, OMAP SD/MMC: 1

reading uboot.env

ERROR: No USB device found

at drivers/usb/gadget/ether.c:2709/usb_ether_init()

Net: CACHE: Misaligned operation at range [8df323c0, 8df32464]

Warning: ethernet@4a100000 using MAC address from ROM

eth0: ethernet@4a100000

Hit any key to stop autoboot: 0

reading zImage

3412752 bytes read in 251 ms (13 MiB/s)

reading dtb

39733 bytes read in 12 ms (3.2 MiB/s)

## Flattened Device Tree blob at 82000000

Booting using the fdt blob at 0x82000000

Loading Device Tree to 8df19000, end 8df25b34 ... OK

Starting kernel ...

[    0.000000] Booting Linux on physical CPU 0x0
[    0.000000] Initializing cgroup subsys cpu
[    0.000000] Initializing cgroup subsys cpuacct
[    0.000000] Linux version 4.4.19-ge581bb1cac (polycaptil@polycaptil-HP-Notebook) (gcc version 5.3.0 (GCC) ) #1 PREEMPT Thu May 24 11:42:17 CEST 2018
[    0.000000] CPU: ARMv7 Processor [413fc082] revision 2 (ARMv7), cr=10c5387d
[    0.000000] CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instruction cache
[    0.000000] Machine model: TI AM335x EVM-SK
[    0.000000] cma: Reserved 48 MiB at 0x8a800000
[    0.000000] Memory policy: Data cache writeback
[    0.000000] CPU: All CPU(s) started in SVC mode.
[    0.000000] AM335X ES2.1 (sgx neon )
[    0.000000] Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 64960
[    0.000000] Kernel command line: console=ttyO0,115200 root=/dev/mmcblk0p3 rw
[    0.000000] PID hash table entries: 1024 (order: 0, 4096 bytes)
[    0.000000] Dentry cache hash table entries: 32768 (order: 5, 131072 bytes)
[    0.000000] Inode-cache hash table entries: 16384 (order: 4, 65536 bytes)
[    0.000000] Memory: 200444K/262144K available (6495K kernel code, 313K rwdata, 2368K rodata, 260K init, 265K bss, 12548K reserved, 49152K cma-reserved, 0K highmem)
[    0.000000] Virtual kernel memory layout:
[    0.000000]     vector  : 0xffff0000 - 0xffff1000   (   4 kB)
[    0.000000]     fixmap  : 0xffc00000 - 0xfff00000   (3072 kB)
[    0.000000]     vmalloc : 0xd0800000 - 0xff800000   ( 752 MB)
[    0.000000]     lowmem  : 0xc0000000 - 0xd0000000   ( 256 MB)
[    0.000000]     pkmap   : 0xbfe00000 - 0xc0000000   (   2 MB)
[    0.000000]     modules : 0xbf000000 - 0xbfe00000   (  14 MB)
[    0.000000]       .text : 0xc0008000 - 0xc08b0034   (8865 kB)
[    0.000000]       .init : 0xc08b1000 - 0xc08f2000   ( 260 kB)
[    0.000000]       .data : 0xc08f2000 - 0xc09407f0   ( 314 kB)
[    0.000000]        .bss : 0xc09407f0 - 0xc0982d58   ( 266 kB)
[    0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=1, Nodes=1
[    0.000000] Preemptible hierarchical RCU implementation.
[    0.000000]  Build-time adjustment of leaf fanout to 32.
[    0.000000] NR_IRQS:16 nr_irqs:16 16
[    0.000000] IRQ: Found an INTC at 0xfa200000 (revision 5.0) with 128 interrupts
[    0.000000] OMAP clockevent source: timer2 at 24000000 Hz
[    0.000015] sched_clock: 32 bits at 24MHz, resolution 41ns, wraps every 89478484971ns
[    0.000036] clocksource: timer1: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 79635851949 ns
[    0.000047] OMAP clocksource: timer1 at 24000000 Hz
[    0.000222] clocksource_probe: no matching clocksources found
[    0.000415] Console: colour dummy device 80x30
[    0.000442] WARNING: Your 'console=ttyO0' has been replaced by 'ttyS0'
[    0.000448] This ensures that you still see kernel messages. Please
[    0.000454] update your kernel commandline.
[    0.000473] Calibrating delay loop... 795.44 BogoMIPS (lpj=3977216)
[    0.089064] pid_max: default: 32768 minimum: 301
[    0.089193] Mount-cache hash table entries: 1024 (order: 0, 4096 bytes)
[    0.089205] Mountpoint-cache hash table entries: 1024 (order: 0, 4096 bytes)
[    0.089932] Initializing cgroup subsys io
[    0.089964] Initializing cgroup subsys memory
[    0.090005] Initializing cgroup subsys devices
[    0.090021] Initializing cgroup subsys freezer
[    0.090036] Initializing cgroup subsys perf_event
[    0.090048] Initializing cgroup subsys pids
[    0.090078] CPU: Testing write buffer coherency: ok
[    0.090499] Setting up static identity map for 0x80008200 - 0x80008258
[    0.092680] devtmpfs: initialized
[    0.105440] VFP support v0.3: implementor 41 architecture 3 part 30 variant c rev 3
[    0.120529] omap_hwmod: debugss: _wait_target_disable failed
[    0.175584] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns
[    0.179852] pinctrl core: initialized pinctrl subsystem
[    0.181216] NET: Registered protocol family 16
[    0.183420] DMA: preallocated 256 KiB pool for atomic coherent allocations
[    0.209061] cpuidle: using governor ladder
[    0.239048] cpuidle: using governor menu
[    0.243661] OMAP GPIO hardware version 0.1
[    0.254360] hw-breakpoint: debug architecture 0x4 unsupported.
[    0.297629] edma 49000000.edma: TI EDMA DMA engine driver
[    0.298606] reg-fixed-voltage fixedregulator@2: could not find pctldev for node /ocp/l4_wkup@44c00000/scm@210000/pinmux@800/pinmux_wl12xx_gpio, deferring probe
[    0.302364] omap_i2c 44e0b000.i2c: could not find pctldev for node /ocp/l4_wkup@44c00000/scm@210000/pinmux@800/pinmux_i2c0_pins, deferring probe
[    0.302525] media: Linux media interface: v0.10
[    0.302588] Linux video capture interface: v2.00
[    0.302638] pps_core: LinuxPPS API ver. 1 registered
[    0.302646] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti < <mailto:[email protected]> [email protected]>
[    0.302676] PTP clock support registered
[    0.302741] EDAC MC: Ver: 3.0.0
[    0.303966] omap-mailbox 480c8000.mailbox: omap mailbox rev 0x400
[    0.304332] Advanced Linux Sound Architecture Driver Initialized.
[    0.305512] clocksource: Switched to clocksource timer1
[    0.316775] NET: Registered protocol family 2
[    0.317599] TCP established hash table entries: 2048 (order: 1, 8192 bytes)
[    0.317636] TCP bind hash table entries: 2048 (order: 1, 8192 bytes)
[    0.317663] TCP: Hash tables configured (established 2048 bind 2048)
[    0.317748] UDP hash table entries: 256 (order: 0, 4096 bytes)
[    0.317767] UDP-Lite hash table entries: 256 (order: 0, 4096 bytes)
[    0.317925] NET: Registered protocol family 1
[    0.318352] RPC: Registered named UNIX socket transport module.
[    0.318366] RPC: Registered udp transport module.
[    0.318372] RPC: Registered tcp transport module.
[    0.318379] RPC: Registered tcp NFSv4.1 backchannel transport module.
[    0.319330] hw perfevents: enabled with armv7_cortex_a8 PMU driver, 5 counters available
[    0.321392] futex hash table entries: 256 (order: -1, 3072 bytes)
[    0.329780] squashfs: version 4.0 (2009/01/31) Phillip Lougher
[    0.330717] NFS: Registering the id_resolver key type
[    0.330798] Key type id_resolver registered
[    0.330807] Key type id_legacy registered
[    0.330886] ntfs: driver 2.1.32 [Flags: R/O].
[    0.334673] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 248)
[    0.334706] io scheduler noop registered
[    0.334719] io scheduler deadline registered
[    0.334877] io scheduler cfq registered (default)
[    0.336555] pinctrl-single 44e10800.pinmux: 142 pins at pa f9e10800 size 568
[    0.339415] backlight supply power not found, using dummy regulator
[    0.402480] Serial: 8250/16550 driver, 10 ports, IRQ sharing disabled
[    0.406962] 44e09000.serial: ttyS0 at MMIO 0x44e09000 (irq = 158, base_baud = 3000000) is a 8250
[    1.017357] console [ttyS0] enabled
[    1.022206] 48022000.serial: ttyS1 at MMIO 0x48022000 (irq = 159, base_baud = 3000000) is a 8250
[    1.032273] [drm] Initialized drm 1.1.0 20060810
[    1.039564] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
[    1.046349] [drm] No driver support for vblank timestamp query.
[    1.062121] Console: switching to colour frame buffer device 60x34
[    1.070360] tilcdc 4830e000.lcdc: fb0:  frame buffer device
[    1.105531] [drm] Initialized tilcdc 1.0.0 20121205 on minor 0
[    1.118644] loop: module loaded
[    1.124253] libphy: Fixed MDIO Bus: probed
[    1.185550] davinci_mdio 4a101000.mdio: davinci mdio revision 1.6
[    1.191695] davinci_mdio 4a101000.mdio: detected phy mask fffffffe
[    1.198786] libphy: 4a101000.mdio: probed
[    1.202886] davinci_mdio 4a101000.mdio: phy[0]: device 4a101000.mdio:00, driver SMSC LAN8710/LAN8720
[    1.212890] cpsw 4a100000.ethernet: Detected MACID = a0:f6:fd:4c:a6:ba
[    1.220531] cpsw 4a100000.ethernet: cpsw: Detected MACID = c4:ed:ba:88:2a:92
[    1.229382] mousedev: PS/2 mouse device common for all mice
[    1.235845] i2c /dev entries driver
[    1.240508] cpuidle: enable-method property 'ti,am3352' found operations
[    1.248197] omap_hsmmc 48060000.mmc: Got CD GPIO
[    1.275713] pinctrl-single 44e10800.pinmux: bad data for mux pinmux_mmc2_pins
[    1.282895] pinctrl-single 44e10800.pinmux: no pins entries for pinmux_mmc2_pins
[    1.317159] ledtrig-cpu: registered to indicate activity on CPUs
[    1.326069] NET: Registered protocol family 10
[    1.332092] sit: IPv6 over IPv4 tunneling driver
[    1.337715] NET: Registered protocol family 17
[    1.342510] Key type dns_resolver registered
[    1.347095] omap_voltage_late_init: Voltage driver support not added
[    1.407145] tps65910-rtc tps65910-rtc: rtc core: registered tps65910-rtc as rtc0
[    1.415278] omap_i2c 44e0b000.i2c: bus 0 rev0.11 at 400 kHz
[    1.421665] omap_hsmmc 48060000.mmc: Got CD GPIO
[    1.426813] vmmc: supplied by vbat
[    1.466341] pinctrl-single 44e10800.pinmux: bad data for mux pinmux_mmc2_pins
[    1.474737] pinctrl-single 44e10800.pinmux: no pins entries for pinmux_mmc2_pins
[    1.513247] mmc0: host does not support reading read-only switch, assuming write-enable
[    1.523414] mmc0: new high speed SDHC card at address 0001
[    1.529635] mmcblk0: mmc0:0001 AS 3.72 GiB
[    1.535996]  mmcblk0: p1 p2 p3
[    1.595932] vdd_mpu: supplied by vbat
[    1.602167] input: gpio_buttons@0 as /devices/platform/gpio_buttons@0/input/input0
[    1.618291] tps65910-rtc tps65910-rtc: setting system clock to 2019-02-01 20:07:49 UTC (1549051669)
[    1.639394] lis3_reg: disabling
[    1.655732] ALSA device list:
[    1.658720]   No soundcards found.
[    1.678290] EXT4-fs (mmcblk0p3): couldn't mount as ext3 due to feature incompatibilities
[    1.696920] EXT4-fs (mmcblk0p3): couldn't mount as ext2 due to feature incompatibilities
[    2.183999] EXT4-fs (mmcblk0p3): recovery complete
[    2.196864] EXT4-fs (mmcblk0p3): mounted filesystem with ordered data mode. Opts: (null)
[    2.205084] VFS: Mounted root (ext4 filesystem) on device 179:3.
[    2.225670] devtmpfs: mounted
[    2.235781] Freeing unused kernel memory: 260K (c08b1000 - c08f2000)
[    2.242162] This architecture does not have kernel memory protection.

INIT: version 2.88 booting

Starting udev

[    3.090091] udevd[78]: starting version 3.2.5
[    3.106175] random: udevd: uninitialized urandom read (16 bytes read, 26 bits of entropy available)
[    3.118667] random: udevd: uninitialized urandom read (16 bytes read, 26 bits of entropy available)
[    3.128014] random: udevd: uninitialized urandom read (16 bytes read, 26 bits of entropy available)
[    3.137335] random: udevd: uninitialized urandom read (16 bytes read, 26 bits of entropy available)
[    3.218433] udevd[79]: starting eudev-3.2.5
[    3.325886] random: udevd: uninitialized urandom read (16 bytes read, 29 bits of entropy available)
[    3.346155] random: udevd: uninitialized urandom read (16 bytes read, 29 bits of entropy available)
[    4.820708] EXT4-fs (mmcblk0p3): re-mounted. Opts: data=ordered
[    5.548283] random: dd: uninitialized urandom read (512 bytes read, 43 bits of entropy available)

INIT: Entering runlevel: 5

Configuring network interfaces... [ 5.820546] net eth0: initializing cpsw version 1.12 (0)

[    5.825987] net eth0: initialized cpsw ale version 1.4
[    5.831150] net eth0: ALE Table size 1024
[    5.838581] net eth0: phy found : id is : 0x7c0f1
[    5.851838] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
[    9.896392] cpsw 4a100000.ethernet eth0: Link is Up - 100Mbps/Full - flow control rx/tx
[    9.904635] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready

chown: unrecognized option '--reference=/etc/resolv.conf'

BusyBox v1.27.2 (2018-11-05 21:16:09 UTC) multi-call binary.

Usage: chown [-Rh]... USER[:[GRP]] FILE...

chmod: unrecognized option '--reference=/etc/resolv.conf'

BusyBox v1.27.2 (2018-11-05 21:16:09 UTC) multi-call binary.

Usage: chmod [-R] MODE[,MODE]... FILE...

done.

Starting system message bus: [ 14.887099] random: dbus-daemon: uninitialized urandom read (12 bytes read, 62 bits of entropy available)

[   14.912318] random: dbus-daemon: uninitialized urandom read (12 bytes read, 62 bits of entropy available)

dbus.

Starting OpenBSD Secure Shell server: sshd

[   15.393971] random: sshd: uninitialized urandom read (32 bytes read, 65 bits of entropy available)

done.

Starting Xserver

Starting DHCP server:

.

starting DNS forwarder and DHCP server: dnsmasq...

X.Org X Server 1.19.6

Release Date: 2017-12-20

X Protocol Version 11, Revision 0

Build Operating System: Linux 4.15.0-38-generic x86_64

Current Operating System: Linux polycaptil-machine-am335x-evmsk 4.4.19-ge581bb1cac #1 PREEMPT Thu May 24 11:42:17 CEST 2018 armv7l

Kernel command line: console=ttyO0,115200 root=/dev/mmcblk0p3 rw

Build Date: 05 November 2018 09:33:21PM

Current version of pixman: 0.34.0

Before reporting problems, check <http://wiki.x.org> http://wiki.x.org

to make sure that you have the latest version.

Markers: (--) probed, (**) from config file, (==) default setting,

(++) from command line, (!!) notice, (II) informational,

(WW) warning, (EE) error, (NI) not implemented, (??) unknown.

(==) Log file: "/var/log/Xorg.0.log", Time: Fri Feb 1 20:08:02 2019

(==) Using config file: "/etc/X11/xorg.conf"

(==) Using system config directory "/usr/share/X11/xorg.conf.d"

done.

Starting HOSTAP Daemon: Configuration file: /etc/hostapd.conf

nl80211: 'nl80211' generic netlink not found

Failed to initialize driver 'nl80211'

wlan0: interface state UNINITIALIZED->DISABLED

wlan0: AP-DISABLED

hostapd_free_hapd_data: Interface wlan0 wasn't started

Starting ntpd: done

Starting syslogd/klogd: done

Starting crond: OK

Poky (Yocto Project Reference Distro) 2.5
polycaptil-machine-am335x-evmsk /dev/ttyS0

polycaptil-machine-am335x-evmsk login: D-BUS per-session daemon address is:
unix:abstract=/tmp/dbus-07WuJSySeb,guid=a3e41f2692316c19766e95535c54a7 25

Size 1024x768 not found in available modes

Error: No calibratable devices found.

matchbox: Cant find a keycode for keysym 269025056

matchbox: ignoring key shortcut XF86Calendar=!$contacts

matchbox: Cant find a keycode for keysym 2809

matchbox: ignoring key shortcut telephone=!$dates

matchbox: Cant find a keycode for keysym 269025050

matchbox: ignoring key shortcut XF86Start=!matchbox-remote -desktop

dbus-daemon[358]: Activating service name='org.a11y.atspi.Registry' requested by ':1.0' (uid=0 pid=354 comm="matchbox-terminal ")

dbus-daemon[358]: Successfully activated service 'org.a11y.atspi.Registry'

SpiRegistry daemon is running with well-known name - org.a11y.atspi.Registry

[   30.662697] random: nonblocking pool is initialized

Poky (Yocto Project Reference Distro) 2.5
polycaptil-machine-am335x-evmsk /dev/ttyS0

Thank’s to take time to read my message.

N.Stanisavljevic

--
_______________________________________________
yocto mailing list
<mailto:[email protected]> [email protected]
<https://lists.yoctoproject.org/listinfo/yocto> https://lists.yoctoproject.org/listinfo/yocto

#9 lore raw

Hello Nikola,

I did some quick analysis of your kernel boot traces, and there are the following observations made:

[1] The kernel used is:
Linux version 4.4.19-ge581bb1cac (polycaptil@polycaptil-HP-Notebook) ?!

In my case (I built YOCTO thud for BBB NOT using X11, only serial console):
Linux version 4.19.7-jumpnow (oe-user@oe-host) (gcc version 8.2.0 (GCC))

I could not explain polycaptil@polycaptil-HP-Notebook, maybe you do it for such kind of platform...
The kernel used is too old, for my taste, you did not replaced it, if you built YOCTO thud!

[2] The kernel command line:

[    0.000000] Kernel command line: console=ttyO0,115200

root=/dev/mmcblk0p2 rw

Shows that you use EMMC as holder for / tree, all good.

[3] The concern about your console: console=ttyO0,115200 Is addressed here:

[    0.000441] WARNING: Your 'console=ttyO0' has been replaced by 'ttyS0'

Later followed by:

[    0.402495] Serial: 8250/16550 driver, 10 ports, IRQ sharing disabled
[    0.406968] 44e09000.serial: ttyS0 at MMIO 0x44e09000 (irq = 158,
base_baud = 3000000) is a 8250
[    1.017361] console [ttyS0] enabled
[    1.022188] 48022000.serial: ttyS1 at MMIO 0x48022000 (irq = 159,

base_baud = 3000000) is a 8250

So, not at all worries about the console!

[4] The following traces are worrying me very much:
Starting Xserver
Starting syslogd/klogd:
done
*X.Org X Server 1.20.1*
X Protocol Version 11, Revision 0
Build Operating System: Linux 4.15.0-45-generic x86_64 *Current Operating System: Linux am335x-evm 4.4.19-ge581bb1cac* #1 PREEMPT Thu May 24 11:42:17 CEST 2018 armv7l
Kernel command line: console=ttyO0,115200 root=/dev/mmcblk0p2 rw Build Date: 02 April 2019 07:35:10PM

As Marc wrote earlier:

Quoted 1 line

Looks like: https://bugzilla.redhat.com/show_bug.cgi?id=1650634

So, as I stated before: you should have in your build:
*X.Org Server 1.20.3! This is the main problem, seems!*

Zoran
_______

Quoted 1,600 lines · Stanisavljevic

Hello Zoran,

I keep you in touch about the migration from sumo to thud to solve my problem of locked touchscreen.

I migrated from sumo to thud version, but nothing changed, the problem is the same, and I have same messages on boot as sumo version.

I looked that the x server have a configuration kernel command line (if I correctly understood), here is what is written :

Kernel command line: console=ttyO0,115200 root=/dev/mmcblk0p2 rw

But the kernel command line of poky is different, here is what is configured for poky kernel command line :

Poky (Yocto Project Reference Distro) 2.6.1 am335x-evm /dev/ttyS0

For the xserver it is ttyO0 and for poky it is ttyS0, maybe there is something wrong here which do problem for the touchscreen.

I put below (at end of this mail )the text which appear during the boot.

I think xorg-x11-server package 1.20.3 was not the problem in the previous yocto version (sumo)…

Best regards

Nikola

Here is the text that appear during the boot :

root@am335x-evm:~# CCCCCCCCCCCCCCCCCCCCCCCC

U-Boot SPL 2017.05-00001-g041a398 (May 02 2018 - 18:36:57)

Trying to boot from MMC1

reading uboot.env

reading u-boot.img

reading u-boot.img

reading u-boot.img

reading u-boot.img

U-Boot 2017.05-00001-g041a398 (May 02 2018 - 18:36:57 +0200)

CPU : AM335X-GP rev 2.1

Model: TI AM335x EVM-SK

DRAM: 256 MiB

NAND: 0 MiB

MMC: OMAP SD/MMC: 0, OMAP SD/MMC: 1

reading uboot.env

ERROR: No USB device found

at drivers/usb/gadget/ether.c:2709/usb_ether_init()

Net: CACHE: Misaligned operation at range [8df323c0, 8df32464]

Warning: ethernet@4a100000 using MAC address from ROM

eth0: ethernet@4a100000

Hit any key to stop autoboot: 0

reading zImage

3412752 bytes read in 252 ms (12.9 MiB/s)

reading dtb

39733 bytes read in 12 ms (3.2 MiB/s)

## Flattened Device Tree blob at 82000000

Booting using the fdt blob at 0x82000000

Loading Device Tree to 8df19000, end 8df25b34 ... OK

Starting kernel ...

[    0.000000] Booting Linux on physical CPU 0x0
[    0.000000] Initializing cgroup subsys cpu
[    0.000000] Initializing cgroup subsys cpuacct
[    0.000000] Linux version 4.4.19-ge581bb1cac

(polycaptil@polycaptil-HP-Notebook) (gcc version 5.3.0 (GCC) ) #1 PREEMPT Thu May 24 11:42:17 CEST 2018

[    0.000000] CPU: ARMv7 Processor [413fc082] revision 2 (ARMv7),

cr=10c5387d

[    0.000000] CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing

instruction cache

[    0.000000] Machine model: TI AM335x EVM-SK
[    0.000000] cma: Reserved 48 MiB at 0x8a800000
[    0.000000] Memory policy: Data cache writeback
[    0.000000] CPU: All CPU(s) started in SVC mode.
[    0.000000] AM335X ES2.1 (sgx neon )
[    0.000000] Built 1 zonelists in Zone order, mobility grouping on.

Total pages: 64960

[    0.000000] Kernel command line: console=ttyO0,115200

root=/dev/mmcblk0p2 rw

[    0.000000] PID hash table entries: 1024 (order: 0, 4096 bytes)
[    0.000000] Dentry cache hash table entries: 32768 (order: 5, 131072

bytes)

[    0.000000] Inode-cache hash table entries: 16384 (order: 4, 65536

bytes)

[    0.000000] Memory: 200444K/262144K available (6495K kernel code, 313K

rwdata, 2368K rodata, 260K init, 265K bss, 12548K reserved, 49152K cma-reserved, 0K highmem)

[    0.000000] Virtual kernel memory layout:
[    0.000000]     vector  : 0xffff0000 - 0xffff1000   (   4 kB)
[    0.000000]     fixmap  : 0xffc00000 - 0xfff00000   (3072 kB)
[    0.000000]     vmalloc : 0xd0800000 - 0xff800000   ( 752 MB)
[    0.000000]     lowmem  : 0xc0000000 - 0xd0000000   ( 256 MB)
[    0.000000]     pkmap   : 0xbfe00000 - 0xc0000000   (   2 MB)
[    0.000000]     modules : 0xbf000000 - 0xbfe00000   (  14 MB)
[    0.000000]       .text : 0xc0008000 - 0xc08b0034   (8865 kB)
[    0.000000]       .init : 0xc08b1000 - 0xc08f2000   ( 260 kB)
[    0.000000]       .data : 0xc08f2000 - 0xc09407f0   ( 314 kB)
[    0.000000]        .bss : 0xc09407f0 - 0xc0982d58   ( 266 kB)
[    0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=1, Nodes=1
[    0.000000] Preemptible hierarchical RCU implementation.
[    0.000000]  Build-time adjustment of leaf fanout to 32.
[    0.000000] NR_IRQS:16 nr_irqs:16 16
[    0.000000] IRQ: Found an INTC at 0xfa200000 (revision 5.0) with 128

interrupts

[    0.000000] OMAP clockevent source: timer2 at 24000000 Hz
[    0.000016] sched_clock: 32 bits at 24MHz, resolution 41ns, wraps every

89478484971ns

[    0.000036] clocksource: timer1: mask: 0xffffffff max_cycles:

0xffffffff, max_idle_ns: 79635851949 ns

[    0.000047] OMAP clocksource: timer1 at 24000000 Hz
[    0.000222] clocksource_probe: no matching clocksources found
[    0.000415] Console: colour dummy device 80x30
[    0.000441] WARNING: Your 'console=ttyO0' has been replaced by 'ttyS0'
[    0.000447] This ensures that you still see kernel messages. Please
[    0.000453] update your kernel commandline.
[    0.000473] Calibrating delay loop... 795.44 BogoMIPS (lpj=3977216)
[    0.089067] pid_max: default: 32768 minimum: 301
[    0.089198] Mount-cache hash table entries: 1024 (order: 0, 4096 bytes)
[    0.089210] Mountpoint-cache hash table entries: 1024 (order: 0, 4096

bytes)

[    0.089932] Initializing cgroup subsys io
[    0.089965] Initializing cgroup subsys memory
[    0.090003] Initializing cgroup subsys devices
[    0.090020] Initializing cgroup subsys freezer
[    0.090035] Initializing cgroup subsys perf_event
[    0.090047] Initializing cgroup subsys pids
[    0.090074] CPU: Testing write buffer coherency: ok
[    0.090499] Setting up static identity map for 0x80008200 - 0x80008258
[    0.092669] devtmpfs: initialized
[    0.105440] VFP support v0.3: implementor 41 architecture 3 part 30

variant c rev 3

[    0.120496] omap_hwmod: debugss: _wait_target_disable failed
[    0.175552] clocksource: jiffies: mask: 0xffffffff max_cycles:

0xffffffff, max_idle_ns: 19112604462750000 ns

[    0.179889] pinctrl core: initialized pinctrl subsystem
[    0.181246] NET: Registered protocol family 16
[    0.183446] DMA: preallocated 256 KiB pool for atomic coherent

allocations

[    0.209067] cpuidle: using governor ladder
[    0.239055] cpuidle: using governor menu
[    0.243662] OMAP GPIO hardware version 0.1
[    0.254349] hw-breakpoint: debug architecture 0x4 unsupported.
[    0.297650] edma 49000000.edma: TI EDMA DMA engine driver
[    0.298630] reg-fixed-voltage fixedregulator@2: could not find pctldev

for node /ocp/l4_wkup@44c00000/scm@210000/pinmux@800/pinmux_wl12xx_gpio, deferring probe

[    0.302384] omap_i2c 44e0b000.i2c: could not find pctldev for node

/ocp/l4_wkup@44c00000/scm@210000/pinmux@800/pinmux_i2c0_pins, deferring probe

[    0.302543] media: Linux media interface: v0.10
[    0.302609] Linux video capture interface: v2.00
[    0.302660] pps_core: LinuxPPS API ver. 1 registered
[    0.302668] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo

Giometti <[email protected]>

[    0.302699] PTP clock support registered
[    0.302764] EDAC MC: Ver: 3.0.0
[    0.303981] omap-mailbox 480c8000.mailbox: omap mailbox rev 0x400
[    0.304343] Advanced Linux Sound Architecture Driver Initialized.
[    0.305508] clocksource: Switched to clocksource timer1
[    0.316757] NET: Registered protocol family 2
[    0.317569] TCP established hash table entries: 2048 (order: 1, 8192

bytes)

[    0.317608] TCP bind hash table entries: 2048 (order: 1, 8192 bytes)
[    0.317636] TCP: Hash tables configured (established 2048 bind 2048)
[    0.317718] UDP hash table entries: 256 (order: 0, 4096 bytes)
[    0.317738] UDP-Lite hash table entries: 256 (order: 0, 4096 bytes)
[    0.317898] NET: Registered protocol family 1
[    0.318323] RPC: Registered named UNIX socket transport module.
[    0.318337] RPC: Registered udp transport module.
[    0.318344] RPC: Registered tcp transport module.
[    0.318350] RPC: Registered tcp NFSv4.1 backchannel transport module.
[    0.319303] hw perfevents: enabled with armv7_cortex_a8 PMU driver, 5

counters available

[    0.321370] futex hash table entries: 256 (order: -1, 3072 bytes)
[    0.329774] squashfs: version 4.0 (2009/01/31) Phillip Lougher
[    0.330714] NFS: Registering the id_resolver key type
[    0.330792] Key type id_resolver registered
[    0.330801] Key type id_legacy registered
[    0.330881] ntfs: driver 2.1.32 [Flags: R/O].
[    0.334651] Block layer SCSI generic (bsg) driver version 0.4 loaded

(major 248)

[    0.334684] io scheduler noop registered
[    0.334698] io scheduler deadline registered
[    0.334855] io scheduler cfq registered (default)
[    0.336527] pinctrl-single 44e10800.pinmux: 142 pins at pa f9e10800

size 568

[    0.339377] backlight supply power not found, using dummy regulator
[    0.402495] Serial: 8250/16550 driver, 10 ports, IRQ sharing disabled
[    0.406968] 44e09000.serial: ttyS0 at MMIO 0x44e09000 (irq = 158,

base_baud = 3000000) is a 8250

[    1.017361] console [ttyS0] enabled
[    1.022188] 48022000.serial: ttyS1 at MMIO 0x48022000 (irq = 159,

base_baud = 3000000) is a 8250

[    1.032233] [drm] Initialized drm 1.1.0 20060810
[    1.039551] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
[    1.046337] [drm] No driver support for vblank timestamp query.
[    1.062083] Console: switching to colour frame buffer device 60x34
[    1.070316] tilcdc 4830e000.lcdc: fb0:  frame buffer device
[    1.105532] [drm] Initialized tilcdc 1.0.0 20121205 on minor 0
[    1.118602] loop: module loaded
[    1.124221] libphy: Fixed MDIO Bus: probed
[    1.185547] davinci_mdio 4a101000.mdio: davinci mdio revision 1.6
[    1.191690] davinci_mdio 4a101000.mdio: detected phy mask fffffffe
[    1.198754] libphy: 4a101000.mdio: probed
[    1.202851] davinci_mdio 4a101000.mdio: phy[0]: device

4a101000.mdio:00, driver SMSC LAN8710/LAN8720

[    1.212830] cpsw 4a100000.ethernet: Detected MACID = a0:f6:fd:4c:a6:ba
[    1.220461] cpsw 4a100000.ethernet: cpsw: Detected MACID =

c4:ed:ba:88:2a:92

[    1.229313] mousedev: PS/2 mouse device common for all mice
[    1.235792] i2c /dev entries driver
[    1.240448] cpuidle: enable-method property 'ti,am3352' found operations
[    1.248143] omap_hsmmc 48060000.mmc: Got CD GPIO
[    1.275713] pinctrl-single 44e10800.pinmux: bad data for mux

pinmux_mmc2_pins

[    1.282895] pinctrl-single 44e10800.pinmux: no pins entries for

pinmux_mmc2_pins

[    1.317167] ledtrig-cpu: registered to indicate activity on CPUs
[    1.326065] NET: Registered protocol family 10
[    1.332086] sit: IPv6 over IPv4 tunneling driver
[    1.337713] NET: Registered protocol family 17
[    1.342528] Key type dns_resolver registered
[    1.347114] omap_voltage_late_init: Voltage driver support not added
[    1.407191] tps65910-rtc tps65910-rtc: rtc core: registered

tps65910-rtc as rtc0

[    1.415327] omap_i2c 44e0b000.i2c: bus 0 rev0.11 at 400 kHz
[    1.421710] omap_hsmmc 48060000.mmc: Got CD GPIO
[    1.426857] vmmc: supplied by vbat
[    1.466348] pinctrl-single 44e10800.pinmux: bad data for mux

pinmux_mmc2_pins

[    1.474748] pinctrl-single 44e10800.pinmux: no pins entries for

pinmux_mmc2_pins

[    1.513242] mmc0: host does not support reading read-only switch,

assuming write-enable

[    1.523406] mmc0: new high speed SDHC card at address 0001
[    1.529619] mmcblk0: mmc0:0001 AS 3.72 GiB
[    1.535970]  mmcblk0: p1 p2 p3
[    1.595927] vdd_mpu: supplied by vbat
[    1.602118] input: gpio_buttons@0 as /devices/platform/gpio_buttons@0

/input/input0

[    1.618310] tps65910-rtc tps65910-rtc: setting system clock to
2019-04-03 08:25:12 UTC (1554279912)
[    1.639397] lis3_reg: disabling
[    1.655734] ALSA device list:
[    1.658723]   No soundcards found.
[    1.678283] EXT4-fs (mmcblk0p2): couldn't mount as ext3 due to feature

incompatibilities

[    1.696903] EXT4-fs (mmcblk0p2): couldn't mount as ext2 due to feature

incompatibilities

[    1.792693] EXT4-fs (mmcblk0p2): recovery complete
[    1.807446] EXT4-fs (mmcblk0p2): mounted filesystem with ordered data

mode. Opts: (null)

[    1.821463] VFS: Mounted root (ext4 filesystem) on device 179:2.
[    1.835669] devtmpfs: mounted
[    1.839073] Freeing unused kernel memory: 260K (c08b1000 - c08f2000)
[    1.851956] This architecture does not have kernel memory protection.

INIT: version 2.88 booting

Starting udev

[    2.513624] udevd[78]: starting version 3.2.5
[    2.527632] random: udevd: uninitialized urandom read (16 bytes read,

18 bits of entropy available)

[    2.546992] random: udevd: uninitialized urandom read (16 bytes read,

18 bits of entropy available)

[    2.566829] random: udevd: uninitialized urandom read (16 bytes read,

18 bits of entropy available)

[    2.585755] random: udevd: uninitialized urandom read (16 bytes read,

18 bits of entropy available)

[    2.668211] udevd[79]: starting eudev-3.2.5
[    3.036159] random: udevd: uninitialized urandom read (16 bytes read,

21 bits of entropy available)

[    3.061761] random: udevd: uninitialized urandom read (16 bytes read,

21 bits of entropy available)

[    4.494682] EXT4-fs (mmcblk0p2): re-mounted. Opts: data=ordered
[    5.052098] random: dd: uninitialized urandom read (512 bytes read, 34

bits of entropy available)

INIT: Entering runlevel: 5

Configuring network interfaces... [ 5.254308] net eth0: initializing
cpsw version 1.12 (0)

[    5.259812] net eth0: initialized cpsw ale version 1.4
[    5.264976] net eth0: ALE Table size 1024
[    5.272411] net eth0: phy found : id is : 0x7c0f1
[    5.285702] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready

udhcpc: started, v1.29.2

udhcpc: sending discover

udhcpc: sending discover

udhcpc: sending discover

udhcpc: no lease, forking to background

done.

Starting system message bus: [ 14.793334] random: dbus-daemon:
uninitialized urandom read (12 bytes read, 51 bits of entropy available)

[   14.831748] random: dbus-daemon: uninitialized urandom read (12 bytes

read, 52 bits of entropy available)

dbus.

Starting Xserver

Starting syslogd/klogd:

done

X.Org X Server 1.20.1

X Protocol Version 11, Revision 0

Build Operating System: Linux 4.15.0-45-generic x86_64

Current Operating System: Linux am335x-evm 4.4.19-ge581bb1cac #1 PREEMPT Thu May 24 11:42:17 CEST 2018 armv7l

Kernel command line: console=ttyO0,115200 root=/dev/mmcblk0p2 rw

Build Date: 02 April 2019 07:35:10PM

Current version of pixman: 0.34.0

Before reporting problems, check http://wiki.x.org

to make sure that you have the latest version.

Markers: (--) probed, (**) from config file, (==) default setting,

(++) from command line, (!!) notice, (II) informational,

(WW) warning, (EE) error, (NI) not implemented, (??) unknown.

(==) Log file: "/var/log/Xorg.0.log", Time: Wed Apr 3 08:25:25 2019

(==) Using config file: "/etc/X11/xorg.conf"

(==) Using system config directory "/usr/share/X11/xorg.conf.d"

Poky (Yocto Project Reference Distro) 2.6.1 am335x-evm /dev/ttyS0

am335x-evm login: The XKEYBOARD keymap compiler (xkbcomp) reports:

Quoted 5 lines

Warning: Unsupported high keycode 372 for name <I372> ignored

X11 cannot support keycodes above 255.

This warning only shows for the first high keycode.

Errors from xkbcomp are not fatal to the X server

[   15.888959] random: dbus-daemon: uninitialized urandom read (12 bytes

read, 65 bits of entropy available)

D-BUS per-session daemon address is:
unix:abstract=/tmp/dbus-JjEW6Wgjtx,guid=87af020e5c6f1a7e21d449e55ca46df5

Size 1024x768 not found in available modes

Error: No calibratable devices found.

matchbox: Cant find a keycode for keysym 269025056

matchbox: ignoring key shortcut XF86Calendar=!$contacts

matchbox: Cant find a keycode for keysym 2809

matchbox: ignoring key shortcut telephone=!$dates

matchbox: Cant find a keycode for keysym 269025050

matchbox: ignoring key shortcut XF86Start=!matchbox-remote -desktop

Failed to launch bus: Failed to execute child process ?/usr/bin? (Permission denied)

(matchbox-terminal:274): dbind-WARNING **: 08:25:27.404: Error retrieving accessibility bus address: org.a11y.Bus.Error: Failed to execute child process ?/usr/bin? (Permission denied)

[   43.718127] random: nonblocking pool is initialized

*De :* Stanisavljevic <[email protected]> *Envoyé :* lundi 18 février 2019 15:27
*À :* 'Zoran Stojsavljevic' <[email protected]> *Cc :* 'Yocto Project' <[email protected]>; 'Marc Ferland' < [email protected]>
*Objet :* RE: [yocto] yocto touchscreen

Hello Zoran

I will try these 2 ways.

Of course, the second way is the easiest, but I will try also the first way only to see if it is possible.

I will keep you in touch if the first way can work.

Best regards,

Nikola

*De :* Zoran Stojsavljevic <[email protected]> *Envoyé :* lundi 18 février 2019 15:21
*À :* Stanisavljevic <[email protected]> *Cc :* Yocto Project <[email protected]>; Marc Ferland < [email protected]>
*Objet :* Re: [yocto] yocto touchscreen

Hello Nikola,

Two things, which immediately came to my mind:

[1 - Harder way] Either to change xorg-x11-server in sumo to match at least xorg-x11-server *1.20.3;*

(harder way, since few people know exact dependencies among various
GFX packages, and what

and how many packages need to be also changed to make
xorg-x11-server 1.20.3 to work)

[2 - Easier Way] Either to migrate YOCTO to Thud, where the correct xorg-x11-server package 1.20.3

is already fixed and set!

(easier way, since exact dependencies among various GFX packages are
already set for 1.20.3)

Best Regards,

Zoran

_______

On Mon, Feb 18, 2019 at 2:48 PM Stanisavljevic <
[email protected]> wrote:

Thank you Zoran for trying to help me.
I tried to resolve the problem, but I didn’t succeed yet, I think I will to continue, and If after some time I find nothing, I’m going to migrate to the thud version.

I will maybe try to use Bugzilla

Nikola

*De :* Zoran Stojsavljevic <[email protected]> *Envoyé :* mardi 5 février 2019 19:28
*À :* Stanisavljevic <[email protected]>
*Cc :* Yocto Project <[email protected]>; [email protected] *Objet :* Re: [yocto] yocto touchscreen

Hello Nikola,

Let us try to cut to the chase!

After reading what Marc Ferland says/writes, and looking into the following:
https://bugzilla.redhat.com/show_bug.cgi?id=1650634

I have spotted the following:

*Pat Riehecky* *2018-11-20 14:28:22 UTC*

*the bug remains with the elrepo kernels:kernel-ml-4.19.2-1.el7.elrepo.x86_64kernel-lt-4.4.163-1.el7.elrepo.x86_64*

I never had this problem since I do not use Xorg (GFX), rather I only

use serial console from VBox VM from my BBB (pass-through).

Thus, my suggestion for you, to skip the whole mess is to rebuild your

distro *in the light of YOCTO Project 2.6.1 (thud 20.0.0.1).*

My best guess (then you'll inherit YOCTO kernel 4.20.x with fixed Xorg - X11).

I am using Fedora 29 on my laptop. Also from the bugzilla:

*Pat Riehecky* *2018-11-20 15:46:11 UTC *

*Bug resolved by rebuilding xorg-x11-server-1.20.3-1.fc29 [1] for 7.6.*

*With this in mind it appears to be an Xorg server bug rather than fbdev.*

From my HP EliteBook 840 G1 Fedora 29, Xorg.0.log - February 5th, 2019.,

I have the following:

[    26.955] Kernel command line: BOOT_IMAGE=/

*vmlinuz-4.20.6-200.fc29.x86_64*

root=/dev/mapper/fedora-root ro rd.lvm.lv=fedora/root rd.lvm.lv=fedora/swap rhgb

quiet LANG=en_US.UTF-8

[    26.955] Build Date: 11 January 2019  12:47:38PM
*[    26.955] Build ID: xorg-x11-server 1.20.3-3.fc29*
[    26.955] Current version of pixman: 0.34.0

Best Regards,
Zoran
_______

Quoted 10 lines · Zoran Stojsavljevic

Hello Nikola,

Quoted 5 lines

I created a kernel recipe with a bbappend file, and, I added the same defconfig that I used for krogoth version. The bbappend for kernel recipe concern meta-ti layer. I didn't edited defconfig file in other layers which contain a kernel recipe.

It could be some problem that Sumo does not take your bbappend file into

the

Quoted 5 lines

consideration as placed.

It could be something else, as well.

I have the same issue with my defconfig file for my Thud Beagle Bone

Black (BBB)

Quoted 1 line

standard board. Every time I recompile my YOCTO for it for different

releases, I need

Quoted 1 line

to import my specific defconfig. But I use complete different repos for

my standard

Quoted 11 lines

Beagle Bone Black than YOCTO BBB Poky reference distro.

Here is what I use in Thud (my bblayers.conf):

POKY_BBLAYERS_CONF_VERSION = "2"
BBPATH = "${TOPDIR}"
BBFILES ?= ""

BBLAYERS ?= " \
    /home/user/projects2/beaglebone-black/yocto-thud/meta-bbb \

/home/user/projects2/beaglebone-black/yocto-thud/meta-openembedded/meta-networking \

Quoted 1 line

/home/user/projects2/beaglebone-black/yocto-thud/meta-openembedded/meta-oe \

Quoted 1 line

/home/user/projects2/beaglebone-black/yocto-thud/meta-openembedded/meta-python \

Quoted 5 lines
    /home/user/projects2/beaglebone-black/yocto-thud/meta-qt5 \
    /home/user/projects2/beaglebone-black/yocto-thud/poky/meta \
    /home/user/projects2/beaglebone-black/yocto-thud/poky/meta-poky"

There, I replace defconfig in this layer:

/home/user/projects2/beaglebone-black/yocto-thud/meta-bbb

Quoted 4 lines

with my own defconfig.

In the directory:

/home/user/projects2/beaglebone-black/yocto-thud/meta-bbb/recipes-kernel/linux/linux-stable-4.19/beaglebone

Quoted 2 lines

If you use only Poky repository, then you need to read the following

paragraph (how to use

Quoted 3 lines

your defconfig with Poky):

[2.3.3. Changing the Configuration] YOCTO Project Linux Development

Manual

Quoted 1 line

https://www.yoctoproject.org/docs/2.5/kernel-dev/kernel-dev.html#using-an-in-tree-defconfig-file

Quoted 9 lines

2.3.3. Changing the Configuration

I hope this will help. Please, keep us posted!

Zoran
_______

On Tue, Feb 5, 2019 at 10:54 AM Stanisavljevic <

Quoted 6 lines · [email protected]> wrote:
Quoted 6 lines

Hy Zoran

Thank's to take time to answer

I created a kernel recipe with a bbappend file, and, I added the same

defconfig that I used for krogoth version.

Quoted 2 lines
Quoted 2 lines

The bbappend for kernel recipe concern meta-ti layer.
I didn't edited defconfig file in other layers which contain a kernel

recipe.

Quoted 2 lines
Quoted 2 lines

I think it's a problem which concern the screen resolution, screen

frequency and adc touchscreen.

Quoted 1 line
Quoted 1 line

Something is different between the krogoth and sumo version, but I

didn't find what is changed...

Quoted 3 lines
Quoted 3 lines

Xrandr show that problem is maybe around the screen resolution. It's show the next message : "Size 1024x768 not found in available

modes"

Quoted 1 line
Quoted 1 line

Maybe it was changed between krogoth and sumo version...but I don't

know where it is indicated if sources files...

Quoted 2 lines
Quoted 2 lines

What do you think ? problem can be around the screen resolution, screen

frequency and adc touchscreen ?

Quoted 11 lines
Quoted 11 lines

Nikola

-----Message d'origine-----
De : Zoran Stojsavljevic <[email protected]> Envoyé : lundi 4 février 2019 17:08
À : Stanisavljevic <[email protected]> Cc : Yocto Project <[email protected]> Objet : Re: [yocto] yocto touchscreen

Quoted 1 line

I built a first version of this os with version krogoth and it works

fine.

Quoted 13 lines
Quoted 13 lines
Quoted 4 lines

Now I build a second version of this os with version sumo and the touch screen works fine during boot process but when kernel is loaded, touchscreen freeze / lock and impossible to use it.

Did you compare Krogoth kernel defconfig with Sumo kernel defconfig?

May there are some mismatches in drivers' setup between these two?

Zoran
_______

On Mon, Feb 4, 2019 at 12:24 PM Stanisavljevic <

Quoted 9 lines · [email protected]> wrote:
Quoted 9 lines
Quoted 9 lines

Hy Team,

I have a problem

Quoted 5 lines
Quoted 5 lines
Quoted 5 lines

I buid a custom os for AM335x processor and I used yocto to do it.

I build a first version of this os with version krogoth and it work

fine.

Quoted 4 lines
Quoted 4 lines
Quoted 4 lines

Now I build a second version of this os with version sumo and the

touchscreen work fine during boot process but when kernel is loaded, touchscreen freeze / lock and impossible to use it.

Quoted 2 lines
Quoted 2 lines
Quoted 2 lines

The terminal is printed on the touchscreen but the screen is locked,

impossible to write a command or to move the mouse to select, ….

Quoted 4 lines
Quoted 4 lines
Quoted 4 lines

Here is the log of boot to the user session (log got with serial

communication between PC and board) :

Quoted 73 lines
Quoted 73 lines
Quoted 73 lines

U-Boot SPL 2017.05-00001-g041a398 (May 02 2018 - 18:36:57)

Trying to boot from MMC1

reading uboot.env

reading u-boot.img

reading u-boot.img

reading u-boot.img

reading u-boot.img

U-Boot 2017.05-00001-g041a398 (May 02 2018 - 18:36:57 +0200)

CPU : AM335X-GP rev 2.1

Model: TI AM335x EVM-SK

DRAM: 256 MiB

NAND: 0 MiB

MMC: OMAP SD/MMC: 0, OMAP SD/MMC: 1

reading uboot.env

ERROR: No USB device found

at drivers/usb/gadget/ether.c:2709/usb_ether_init()

Net: CACHE: Misaligned operation at range [8df323c0, 8df32464]

Warning: ethernet@4a100000 using MAC address from ROM

eth0: ethernet@4a100000

Hit any key to stop autoboot: 0

reading zImage

3412752 bytes read in 251 ms (13 MiB/s)

reading dtb

39733 bytes read in 12 ms (3.2 MiB/s)

## Flattened Device Tree blob at 82000000

Booting using the fdt blob at 0x82000000

Loading Device Tree to 8df19000, end 8df25b34 ... OK

Starting kernel ...

Quoted 7 lines
Quoted 7 lines
Quoted 7 lines
[    0.000000] Booting Linux on physical CPU 0x0
[    0.000000] Initializing cgroup subsys cpu
[    0.000000] Initializing cgroup subsys cpuacct
[    0.000000] Linux version 4.4.19-ge581bb1cac

(polycaptil@polycaptil-HP-Notebook) (gcc version 5.3.0 (GCC) ) #1 PREEMPT Thu May 24 11:42:17 CEST 2018

Quoted 2 lines
Quoted 2 lines
Quoted 2 lines
[    0.000000] CPU: ARMv7 Processor [413fc082] revision 2 (ARMv7),

cr=10c5387d

Quoted 2 lines
Quoted 2 lines
Quoted 2 lines
[    0.000000] CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing

instruction cache

Quoted 5 lines
Quoted 5 lines
Quoted 5 lines
[    0.000000] Machine model: TI AM335x EVM-SK
[    0.000000] cma: Reserved 48 MiB at 0x8a800000
Quoted 7 lines
Quoted 7 lines
Quoted 7 lines
[    0.000000] Memory policy: Data cache writeback
[    0.000000] CPU: All CPU(s) started in SVC mode.
[    0.000000] AM335X ES2.1 (sgx neon )
[    0.000000] Built 1 zonelists in Zone order, mobility grouping

on. Total pages: 64960

Quoted 2 lines
Quoted 2 lines
Quoted 2 lines
[    0.000000] Kernel command line: console=ttyO0,115200

root=/dev/mmcblk0p3 rw

Quoted 4 lines
Quoted 4 lines
Quoted 4 lines
[    0.000000] PID hash table entries: 1024 (order: 0, 4096 bytes)
[    0.000000] Dentry cache hash table entries: 32768 (order: 5,

131072 bytes)

Quoted 2 lines
Quoted 2 lines
Quoted 2 lines
[    0.000000] Inode-cache hash table entries: 16384 (order: 4, 65536

bytes)

Quoted 2 lines
Quoted 2 lines
Quoted 2 lines
[    0.000000] Memory: 200444K/262144K available (6495K kernel code,

313K rwdata, 2368K rodata, 260K init, 265K bss, 12548K reserved, 49152K cma-reserved, 0K highmem)

Quoted 17 lines
Quoted 17 lines
Quoted 17 lines
[    0.000000] Virtual kernel memory layout:
[    0.000000]     vector  : 0xffff0000 - 0xffff1000   (   4 kB)
[    0.000000]     fixmap  : 0xffc00000 - 0xfff00000   (3072 kB)
[    0.000000]     vmalloc : 0xd0800000 - 0xff800000   ( 752 MB)
[    0.000000]     lowmem  : 0xc0000000 - 0xd0000000   ( 256 MB)
[    0.000000]     pkmap   : 0xbfe00000 - 0xc0000000   (   2 MB)
[    0.000000]     modules : 0xbf000000 - 0xbfe00000   (  14 MB)
[    0.000000]       .text : 0xc0008000 - 0xc08b0034   (8865 kB)
Quoted 7 lines
Quoted 7 lines
Quoted 7 lines
[    0.000000]       .init : 0xc08b1000 - 0xc08f2000   ( 260 kB)
[    0.000000]       .data : 0xc08f2000 - 0xc09407f0   ( 314 kB)
[    0.000000]        .bss : 0xc09407f0 - 0xc0982d58   ( 266 kB)
[    0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=1,

Nodes=1

Quoted 8 lines
Quoted 8 lines
Quoted 8 lines
[    0.000000] Preemptible hierarchical RCU implementation.
[    0.000000]  Build-time adjustment of leaf fanout to 32.
[    0.000000] NR_IRQS:16 nr_irqs:16 16
[    0.000000] IRQ: Found an INTC at 0xfa200000 (revision 5.0) with

128 interrupts

Quoted 4 lines
Quoted 4 lines
Quoted 4 lines
[    0.000000] OMAP clockevent source: timer2 at 24000000 Hz
[    0.000015] sched_clock: 32 bits at 24MHz, resolution 41ns, wraps

every 89478484971ns

Quoted 2 lines
Quoted 2 lines
Quoted 2 lines
[    0.000036] clocksource: timer1: mask: 0xffffffff max_cycles:

0xffffffff, max_idle_ns: 79635851949 ns

Quoted 8 lines
Quoted 8 lines
Quoted 8 lines
[    0.000047] OMAP clocksource: timer1 at 24000000 Hz
[    0.000222] clocksource_probe: no matching clocksources found
[    0.000415] Console: colour dummy device 80x30
[    0.000442] WARNING: Your 'console=ttyO0' has been replaced by

'ttyS0'

Quoted 10 lines
Quoted 10 lines
Quoted 10 lines
[    0.000448] This ensures that you still see kernel messages. Please
[    0.000454] update your kernel commandline.
[    0.000473] Calibrating delay loop... 795.44 BogoMIPS (lpj=3977216)
[    0.089064] pid_max: default: 32768 minimum: 301
[    0.089193] Mount-cache hash table entries: 1024 (order: 0, 4096

bytes)

Quoted 2 lines
Quoted 2 lines
Quoted 2 lines
[    0.089205] Mountpoint-cache hash table entries: 1024 (order: 0,

4096 bytes)

Quoted 9 lines
Quoted 9 lines
Quoted 9 lines
[    0.089932] Initializing cgroup subsys io
[    0.089964] Initializing cgroup subsys memory
[    0.090005] Initializing cgroup subsys devices
[    0.090021] Initializing cgroup subsys freezer
Quoted 7 lines
Quoted 7 lines
Quoted 7 lines
[    0.090036] Initializing cgroup subsys perf_event
[    0.090048] Initializing cgroup subsys pids
[    0.090078] CPU: Testing write buffer coherency: ok
[    0.090499] Setting up static identity map for 0x80008200 -

0x80008258

Quoted 4 lines
Quoted 4 lines
Quoted 4 lines
[    0.092680] devtmpfs: initialized
[    0.105440] VFP support v0.3: implementor 41 architecture 3 part

30 variant c rev 3

Quoted 4 lines
Quoted 4 lines
Quoted 4 lines
[    0.120529] omap_hwmod: debugss: _wait_target_disable failed
[    0.175584] clocksource: jiffies: mask: 0xffffffff max_cycles:

0xffffffff, max_idle_ns: 19112604462750000 ns

Quoted 6 lines
Quoted 6 lines
Quoted 6 lines
[    0.179852] pinctrl core: initialized pinctrl subsystem
[    0.181216] NET: Registered protocol family 16
[    0.183420] DMA: preallocated 256 KiB pool for atomic coherent

allocations

Quoted 5 lines
Quoted 5 lines
Quoted 5 lines
[    0.209061] cpuidle: using governor ladder
[    0.239048] cpuidle: using governor menu
Quoted 7 lines
Quoted 7 lines
Quoted 7 lines
[    0.243661] OMAP GPIO hardware version 0.1
[    0.254360] hw-breakpoint: debug architecture 0x4 unsupported.
[    0.297629] edma 49000000.edma: TI EDMA DMA engine driver
[    0.298606] reg-fixed-voltage fixedregulator@2: could not find

pctldev for node /ocp/l4_wkup@44c00000/scm@210000/pinmux@800/pinmux_wl12xx_gpio, deferring probe

Quoted 2 lines
Quoted 2 lines
Quoted 2 lines
[    0.302364] omap_i2c 44e0b000.i2c: could not find pctldev for node

/ocp/l4_wkup@44c00000/scm@210000/pinmux@800/pinmux_i2c0_pins, deferring probe

Quoted 8 lines
Quoted 8 lines
Quoted 8 lines
[    0.302525] media: Linux media interface: v0.10
[    0.302588] Linux video capture interface: v2.00
[    0.302638] pps_core: LinuxPPS API ver. 1 registered
[    0.302646] pps_core: Software ver. 5.3.6 - Copyright 2005-2007

Rodolfo Giometti <[email protected]>

Quoted 7 lines
Quoted 7 lines
Quoted 7 lines
[    0.302676] PTP clock support registered
[    0.302741] EDAC MC: Ver: 3.0.0
[    0.303966] omap-mailbox 480c8000.mailbox: omap mailbox rev 0x400
Quoted 7 lines
Quoted 7 lines
Quoted 7 lines
[    0.304332] Advanced Linux Sound Architecture Driver Initialized.
[    0.305512] clocksource: Switched to clocksource timer1
[    0.316775] NET: Registered protocol family 2
[    0.317599] TCP established hash table entries: 2048 (order: 1,

8192 bytes)

Quoted 2 lines
Quoted 2 lines
Quoted 2 lines
[    0.317636] TCP bind hash table entries: 2048 (order: 1, 8192

bytes)

Quoted 2 lines
Quoted 2 lines
Quoted 2 lines
[    0.317663] TCP: Hash tables configured (established 2048 bind

2048)

Quoted 7 lines
Quoted 7 lines
Quoted 7 lines
[    0.317748] UDP hash table entries: 256 (order: 0, 4096 bytes)
[    0.317767] UDP-Lite hash table entries: 256 (order: 0, 4096 bytes)
[    0.317925] NET: Registered protocol family 1
Quoted 7 lines
Quoted 7 lines
Quoted 7 lines
[    0.318352] RPC: Registered named UNIX socket transport module.
[    0.318366] RPC: Registered udp transport module.
[    0.318372] RPC: Registered tcp transport module.
[    0.318379] RPC: Registered tcp NFSv4.1 backchannel transport

module.

Quoted 2 lines
Quoted 2 lines
Quoted 2 lines
[    0.319330] hw perfevents: enabled with armv7_cortex_a8 PMU

driver, 5 counters available

Quoted 7 lines
Quoted 7 lines
Quoted 7 lines
[    0.321392] futex hash table entries: 256 (order: -1, 3072 bytes)
[    0.329780] squashfs: version 4.0 (2009/01/31) Phillip Lougher
[    0.330717] NFS: Registering the id_resolver key type
Quoted 7 lines
Quoted 7 lines
Quoted 7 lines
[    0.330798] Key type id_resolver registered
[    0.330807] Key type id_legacy registered
[    0.330886] ntfs: driver 2.1.32 [Flags: R/O].
[    0.334673] Block layer SCSI generic (bsg) driver version 0.4

loaded (major 248)

Quoted 8 lines
Quoted 8 lines
Quoted 8 lines
[    0.334706] io scheduler noop registered
[    0.334719] io scheduler deadline registered
[    0.334877] io scheduler cfq registered (default)
[    0.336555] pinctrl-single 44e10800.pinmux: 142 pins at pa

f9e10800 size 568

Quoted 4 lines
Quoted 4 lines
Quoted 4 lines
[    0.339415] backlight supply power not found, using dummy regulator
[    0.402480] Serial: 8250/16550 driver, 10 ports, IRQ sharing

disabled

Quoted 2 lines
Quoted 2 lines
Quoted 2 lines
[    0.406962] 44e09000.serial: ttyS0 at MMIO 0x44e09000 (irq = 158,

base_baud = 3000000) is a 8250

Quoted 4 lines
Quoted 4 lines
Quoted 4 lines
[    1.017357] console [ttyS0] enabled
[    1.022206] 48022000.serial: ttyS1 at MMIO 0x48022000 (irq = 159,

base_baud = 3000000) is a 8250

Quoted 4 lines
Quoted 4 lines
Quoted 4 lines
[    1.032273] [drm] Initialized drm 1.1.0 20060810
[    1.039564] [drm] Supports vblank timestamp caching Rev 2

(21.10.2013).

Quoted 13 lines
Quoted 13 lines
Quoted 13 lines
[    1.046349] [drm] No driver support for vblank timestamp query.
[    1.062121] Console: switching to colour frame buffer device 60x34
[    1.070360] tilcdc 4830e000.lcdc: fb0:  frame buffer device
[    1.105531] [drm] Initialized tilcdc 1.0.0 20121205 on minor 0
[    1.118644] loop: module loaded
[    1.124253] libphy: Fixed MDIO Bus: probed
Quoted 7 lines
Quoted 7 lines
Quoted 7 lines
[    1.185550] davinci_mdio 4a101000.mdio: davinci mdio revision 1.6
[    1.191695] davinci_mdio 4a101000.mdio: detected phy mask fffffffe
[    1.198786] libphy: 4a101000.mdio: probed
[    1.202886] davinci_mdio 4a101000.mdio: phy[0]: device

4a101000.mdio:00, driver SMSC LAN8710/LAN8720

Quoted 2 lines
Quoted 2 lines
Quoted 2 lines
[    1.212890] cpsw 4a100000.ethernet: Detected MACID =

a0:f6:fd:4c:a6:ba

Quoted 2 lines
Quoted 2 lines
Quoted 2 lines
[    1.220531] cpsw 4a100000.ethernet: cpsw: Detected MACID =

c4:ed:ba:88:2a:92

Quoted 6 lines
Quoted 6 lines
Quoted 6 lines
[    1.229382] mousedev: PS/2 mouse device common for all mice
[    1.235845] i2c /dev entries driver
[    1.240508] cpuidle: enable-method property 'ti,am3352' found

operations

Quoted 4 lines
Quoted 4 lines
Quoted 4 lines
[    1.248197] omap_hsmmc 48060000.mmc: Got CD GPIO
[    1.275713] pinctrl-single 44e10800.pinmux: bad data for mux

pinmux_mmc2_pins

Quoted 2 lines
Quoted 2 lines
Quoted 2 lines
[    1.282895] pinctrl-single 44e10800.pinmux: no pins entries for

pinmux_mmc2_pins

Quoted 5 lines
Quoted 5 lines
Quoted 5 lines
[    1.317159] ledtrig-cpu: registered to indicate activity on CPUs
[    1.326069] NET: Registered protocol family 10
Quoted 7 lines
Quoted 7 lines
Quoted 7 lines
[    1.332092] sit: IPv6 over IPv4 tunneling driver
[    1.337715] NET: Registered protocol family 17
[    1.342510] Key type dns_resolver registered
[    1.347095] omap_voltage_late_init: Voltage driver support not

added

Quoted 2 lines
Quoted 2 lines
Quoted 2 lines
[    1.407145] tps65910-rtc tps65910-rtc: rtc core: registered

tps65910-rtc as rtc0

Quoted 8 lines
Quoted 8 lines
Quoted 8 lines
[    1.415278] omap_i2c 44e0b000.i2c: bus 0 rev0.11 at 400 kHz
[    1.421665] omap_hsmmc 48060000.mmc: Got CD GPIO
[    1.426813] vmmc: supplied by vbat
[    1.466341] pinctrl-single 44e10800.pinmux: bad data for mux

pinmux_mmc2_pins

Quoted 2 lines
Quoted 2 lines
Quoted 2 lines
[    1.474737] pinctrl-single 44e10800.pinmux: no pins entries for

pinmux_mmc2_pins

Quoted 2 lines
Quoted 2 lines
Quoted 2 lines
[    1.513247] mmc0: host does not support reading read-only switch,

assuming write-enable

Quoted 10 lines
Quoted 10 lines
Quoted 10 lines
[    1.523414] mmc0: new high speed SDHC card at address 0001
[    1.529635] mmcblk0: mmc0:0001 AS 3.72 GiB
[    1.535996]  mmcblk0: p1 p2 p3
[    1.595932] vdd_mpu: supplied by vbat
[    1.602167] input: gpio_buttons@0 as

/devices/platform/gpio_buttons@0/input/input0

Quoted 2 lines
Quoted 2 lines
Quoted 2 lines
[    1.618291] tps65910-rtc tps65910-rtc: setting system clock to
2019-02-01 20:07:49 UTC (1549051669)
Quoted 8 lines
Quoted 8 lines
Quoted 8 lines
[    1.639394] lis3_reg: disabling
[    1.655732] ALSA device list:
[    1.658720]   No soundcards found.
[    1.678290] EXT4-fs (mmcblk0p3): couldn't mount as ext3 due to

feature incompatibilities

Quoted 2 lines
Quoted 2 lines
Quoted 2 lines
[    1.696920] EXT4-fs (mmcblk0p3): couldn't mount as ext2 due to

feature incompatibilities

Quoted 4 lines
Quoted 4 lines
Quoted 4 lines
[    2.183999] EXT4-fs (mmcblk0p3): recovery complete
[    2.196864] EXT4-fs (mmcblk0p3): mounted filesystem with ordered

data mode. Opts: (null)

Quoted 6 lines
Quoted 6 lines
Quoted 6 lines
[    2.205084] VFS: Mounted root (ext4 filesystem) on device 179:3.
[    2.225670] devtmpfs: mounted
[    2.235781] Freeing unused kernel memory: 260K (c08b1000 -

c08f2000)

Quoted 2 lines
Quoted 2 lines
Quoted 2 lines
[    2.242162] This architecture does not have kernel memory

protection.

Quoted 8 lines
Quoted 8 lines
Quoted 8 lines

INIT: version 2.88 booting

Starting udev

[    3.090091] udevd[78]: starting version 3.2.5
[    3.106175] random: udevd: uninitialized urandom read (16 bytes

read, 26 bits of entropy available)

Quoted 2 lines
Quoted 2 lines
Quoted 2 lines
[    3.118667] random: udevd: uninitialized urandom read (16 bytes

read, 26 bits of entropy available)

Quoted 2 lines
Quoted 2 lines
Quoted 2 lines
[    3.128014] random: udevd: uninitialized urandom read (16 bytes

read, 26 bits of entropy available)

Quoted 2 lines
Quoted 2 lines
Quoted 2 lines
[    3.137335] random: udevd: uninitialized urandom read (16 bytes

read, 26 bits of entropy available)

Quoted 4 lines
Quoted 4 lines
Quoted 4 lines
[    3.218433] udevd[79]: starting eudev-3.2.5
[    3.325886] random: udevd: uninitialized urandom read (16 bytes

read, 29 bits of entropy available)

Quoted 2 lines
Quoted 2 lines
Quoted 2 lines
[    3.346155] random: udevd: uninitialized urandom read (16 bytes

read, 29 bits of entropy available)

Quoted 4 lines
Quoted 4 lines
Quoted 4 lines
[    4.820708] EXT4-fs (mmcblk0p3): re-mounted. Opts: data=ordered
[    5.548283] random: dd: uninitialized urandom read (512 bytes

read, 43 bits of entropy available)

Quoted 4 lines
Quoted 4 lines
Quoted 4 lines

INIT: Entering runlevel: 5

Configuring network interfaces... [ 5.820546] net eth0:

initializing cpsw version 1.12 (0)

Quoted 10 lines
Quoted 10 lines
Quoted 10 lines
[    5.825987] net eth0: initialized cpsw ale version 1.4
[    5.831150] net eth0: ALE Table size 1024
[    5.838581] net eth0: phy found : id is : 0x7c0f1
[    5.851838] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
[    9.896392] cpsw 4a100000.ethernet eth0: Link is Up - 100Mbps/Full

- flow control rx/tx

Quoted 17 lines
Quoted 17 lines
Quoted 17 lines
[    9.904635] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready

chown: unrecognized option '--reference=/etc/resolv.conf'

BusyBox v1.27.2 (2018-11-05 21:16:09 UTC) multi-call binary.

Usage: chown [-Rh]... USER[:[GRP]] FILE...

chmod: unrecognized option '--reference=/etc/resolv.conf'

BusyBox v1.27.2 (2018-11-05 21:16:09 UTC) multi-call binary.

Quoted 5 lines
Quoted 5 lines
Quoted 5 lines

Usage: chmod [-R] MODE[,MODE]... FILE...

done.

Starting system message bus: [ 14.887099] random: dbus-daemon:

uninitialized urandom read (12 bytes read, 62 bits of entropy available)

Quoted 2 lines
Quoted 2 lines
Quoted 2 lines
[   14.912318] random: dbus-daemon: uninitialized urandom read (12

bytes read, 62 bits of entropy available)

Quoted 6 lines
Quoted 6 lines
Quoted 6 lines

dbus.

Starting OpenBSD Secure Shell server: sshd

[   15.393971] random: sshd: uninitialized urandom read (32 bytes

read, 65 bits of entropy available)

Quoted 96 lines
Quoted 96 lines
Quoted 96 lines

done.

Starting Xserver

Starting DHCP server:

.

starting DNS forwarder and DHCP server: dnsmasq...

X.Org X Server 1.19.6

Release Date: 2017-12-20

X Protocol Version 11, Revision 0

Build Operating System: Linux 4.15.0-38-generic x86_64

Current Operating System: Linux polycaptil-machine-am335x-evmsk 4.4.19-ge581bb1cac #1 PREEMPT Thu May 24 11:42:17 CEST 2018 armv7l

Kernel command line: console=ttyO0,115200 root=/dev/mmcblk0p3 rw

Build Date: 05 November 2018 09:33:21PM

Current version of pixman: 0.34.0

Before reporting problems, check http://wiki.x.org

to make sure that you have the latest version.

Markers: (--) probed, (**) from config file, (==) default setting,

(++) from command line, (!!) notice, (II) informational,

(WW) warning, (EE) error, (NI) not implemented, (??) unknown.

(==) Log file: "/var/log/Xorg.0.log", Time: Fri Feb 1 20:08:02 2019

(==) Using config file: "/etc/X11/xorg.conf"

(==) Using system config directory "/usr/share/X11/xorg.conf.d"

done.

Starting HOSTAP Daemon: Configuration file: /etc/hostapd.conf

nl80211: 'nl80211' generic netlink not found

Failed to initialize driver 'nl80211'

wlan0: interface state UNINITIALIZED->DISABLED

wlan0: AP-DISABLED

hostapd_free_hapd_data: Interface wlan0 wasn't started

Starting ntpd: done

Starting syslogd/klogd: done

Starting crond: OK

Poky (Yocto Project Reference Distro) 2.5
polycaptil-machine-am335x-evmsk /dev/ttyS0

polycaptil-machine-am335x-evmsk login: D-BUS per-session daemon address is:
unix:abstract=/tmp/dbus-07WuJSySeb,guid=a3e41f2692316c19766e95535c54a7 25

Size 1024x768 not found in available modes

Error: No calibratable devices found.

matchbox: Cant find a keycode for keysym 269025056

matchbox: ignoring key shortcut XF86Calendar=!$contacts

matchbox: Cant find a keycode for keysym 2809

matchbox: ignoring key shortcut telephone=!$dates

matchbox: Cant find a keycode for keysym 269025050

Quoted 8 lines
Quoted 8 lines
Quoted 8 lines

matchbox: ignoring key shortcut XF86Start=!matchbox-remote -desktop

dbus-daemon[358]: Activating service name='org.a11y.atspi.Registry' requested by ':1.0' (uid=0 pid=354 comm="matchbox-terminal ")

dbus-daemon[358]: Successfully activated service

'org.a11y.atspi.Registry'

Quoted 23 lines
Quoted 23 lines
Quoted 22 lines

SpiRegistry daemon is running with well-known name - org.a11y.atspi.Registry

[   30.662697] random: nonblocking pool is initialized

Poky (Yocto Project Reference Distro) 2.5
polycaptil-machine-am335x-evmsk /dev/ttyS0

Thank’s to take time to read my message.

N.Stanisavljevic

--
_______________________________________________
yocto mailing list
[email protected]
https://lists.yoctoproject.org/listinfo/yocto

#10 lore raw

Hello Zoran,

I tried to change X.org X Server version

To do this I used yocto warrior version.

When I boot the system, it’s written that x.org X Server version is to 1.20.4

But I have the same problem as before, the touchscreen is completely locked and don’t react when I touch the screen.

Do you have an other idea where the problem is coming ?

Here I copy the boot log :

U-Boot SPL 2017.05-00001-g041a398 (May 02 2018 - 18:36:57)

Trying to boot from MMC1

reading uboot.env

reading u-boot.img

reading u-boot.img

reading u-boot.img

reading u-boot.img

U-Boot 2017.05-00001-g041a398 (May 02 2018 - 18:36:57 +0200)

CPU : AM335X-GP rev 2.1

Model: TI AM335x EVM-SK

DRAM: 256 MiB

NAND: 0 MiB

MMC: OMAP SD/MMC: 0, OMAP SD/MMC: 1

reading uboot.env

ERROR: No USB device found

at drivers/usb/gadget/ether.c:2709/usb_ether_init()

Net: CACHE: Misaligned operation at range [8df323c0, 8df32464]

Warning: ethernet@4a100000 using MAC address from ROM

eth0: ethernet@4a100000

Hit any key to stop autoboot: 0

reading zImage

3412752 bytes read in 251 ms (13 MiB/s)

reading dtb

39733 bytes read in 12 ms (3.2 MiB/s)

## Flattened Device Tree blob at 82000000

Booting using the fdt blob at 0x82000000

Loading Device Tree to 8df19000, end 8df25b34 ... OK

Starting kernel ...

[    0.000000] Booting Linux on physical CPU 0x0
[    0.000000] Initializing cgroup subsys cpu
[    0.000000] Initializing cgroup subsys cpuacct
[    0.000000] Linux version 4.4.19-ge581bb1cac (polycaptil@polycaptil-HP-Notebo                                                      ok) (gcc version 5.3.0 (GCC) ) #1 PREEMPT Thu May 24 11:42:17 CEST 2018
[    0.000000] CPU: ARMv7 Processor [413fc082] revision 2 (ARMv7), cr=10c5387d
[    0.000000] CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instructio                                                      n cache
[    0.000000] Machine model: TI AM335x EVM-SK
[    0.000000] cma: Reserved 48 MiB at 0x8a800000
[    0.000000] Memory policy: Data cache writeback
[    0.000000] CPU: All CPU(s) started in SVC mode.
[    0.000000] AM335X ES2.1 (sgx neon )
[    0.000000] Built 1 zonelists in Zone order, mobility grouping on.  Total pag                                                      es: 64960
[    0.000000] Kernel command line: console=ttyO0,115200 root=/dev/mmcblk0p2 rw
[    0.000000] PID hash table entries: 1024 (order: 0, 4096 bytes)
[    0.000000] Dentry cache hash table entries: 32768 (order: 5, 131072 bytes)
[    0.000000] Inode-cache hash table entries: 16384 (order: 4, 65536 bytes)
[    0.000000] Memory: 200444K/262144K available (6495K kernel code, 313K rwdata                                                      , 2368K rodata, 260K init, 265K bss, 12548K reserved, 49152K cma-reserved, 0K hi                                                      ghmem)
[    0.000000] Virtual kernel memory layout:
[    0.000000]     vector  : 0xffff0000 - 0xffff1000   (   4 kB)
[    0.000000]     fixmap  : 0xffc00000 - 0xfff00000   (3072 kB)
[    0.000000]     vmalloc : 0xd0800000 - 0xff800000   ( 752 MB)
[    0.000000]     lowmem  : 0xc0000000 - 0xd0000000   ( 256 MB)
[    0.000000]     pkmap   : 0xbfe00000 - 0xc0000000   (   2 MB)
[    0.000000]     modules : 0xbf000000 - 0xbfe00000   (  14 MB)
[    0.000000]       .text : 0xc0008000 - 0xc08b0034   (8865 kB)
[    0.000000]       .init : 0xc08b1000 - 0xc08f2000   ( 260 kB)
[    0.000000]       .data : 0xc08f2000 - 0xc09407f0   ( 314 kB)
[    0.000000]        .bss : 0xc09407f0 - 0xc0982d58   ( 266 kB)
[    0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=1, Nodes=1
[    0.000000] Preemptible hierarchical RCU implementation.
[    0.000000]  Build-time adjustment of leaf fanout to 32.
[    0.000000] NR_IRQS:16 nr_irqs:16 16
[    0.000000] IRQ: Found an INTC at 0xfa200000 (revision 5.0) with 128 interrup                                                      ts
[    0.000000] OMAP clockevent source: timer2 at 24000000 Hz
[    0.000013] sched_clock: 32 bits at 24MHz, resolution 41ns, wraps every 89478                                                      484971ns
[    0.000034] clocksource: timer1: mask: 0xffffffff max_cycles: 0xffffffff, max                                                      _idle_ns: 79635851949 ns
[    0.000046] OMAP clocksource: timer1 at 24000000 Hz
[    0.000221] clocksource_probe: no matching clocksources found
[    0.000414] Console: colour dummy device 80x30
[    0.000440] WARNING: Your 'console=ttyO0' has been replaced by 'ttyS0'
[    0.000447] This ensures that you still see kernel messages. Please
[    0.000452] update your kernel commandline.
[    0.000471] Calibrating delay loop... 795.44 BogoMIPS (lpj=3977216)
[    0.089060] pid_max: default: 32768 minimum: 301
[    0.089190] Mount-cache hash table entries: 1024 (order: 0, 4096 bytes)
[    0.089201] Mountpoint-cache hash table entries: 1024 (order: 0, 4096 bytes)
[    0.089924] Initializing cgroup subsys io
[    0.089956] Initializing cgroup subsys memory
[    0.089996] Initializing cgroup subsys devices
[    0.090011] Initializing cgroup subsys freezer
[    0.090026] Initializing cgroup subsys perf_event
[    0.090038] Initializing cgroup subsys pids
[    0.090068] CPU: Testing write buffer coherency: ok
[    0.090493] Setting up static identity map for 0x80008200 - 0x80008258
[    0.092679] devtmpfs: initialized
[    0.105439] VFP support v0.3: implementor 41 architecture 3 part 30 variant c                                                       rev 3
[    0.120521] omap_hwmod: debugss: _wait_target_disable failed
[    0.175644] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, ma                                                      x_idle_ns: 19112604462750000 ns
[    0.179890] pinctrl core: initialized pinctrl subsystem
[    0.181243] NET: Registered protocol family 16
[    0.183450] DMA: preallocated 256 KiB pool for atomic coherent allocations
[    0.209057] cpuidle: using governor ladder
[    0.239046] cpuidle: using governor menu
[    0.243690] OMAP GPIO hardware version 0.1
[    0.254398] hw-breakpoint: debug architecture 0x4 unsupported.
[    0.297651] edma 49000000.edma: TI EDMA DMA engine driver
[    0.298633] reg-fixed-voltage fixedregulator@2: could not find pctldev for no                                                      de /ocp/l4_wkup@44c00000/scm@210000/pinmux@800/pinmux_wl12xx_gpio, deferring pro                                                      be
[    0.302387] omap_i2c 44e0b000.i2c: could not find pctldev for node /ocp/l4_wk                                                      up@44c00000/scm@210000/pinmux@800/pinmux_i2c0_pins, deferring probe
[    0.302542] media: Linux media interface: v0.10
[    0.302605] Linux video capture interface: v2.00
[    0.302656] pps_core: LinuxPPS API ver. 1 registered
[    0.302664] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giome                                                      tti <[email protected]>
[    0.302694] PTP clock support registered
[    0.302758] EDAC MC: Ver: 3.0.0
[    0.303971] omap-mailbox 480c8000.mailbox: omap mailbox rev 0x400
[    0.304334] Advanced Linux Sound Architecture Driver Initialized.
[    0.305513] clocksource: Switched to clocksource timer1
[    0.316808] NET: Registered protocol family 2
[    0.317626] TCP established hash table entries: 2048 (order: 1, 8192 bytes)
[    0.317665] TCP bind hash table entries: 2048 (order: 1, 8192 bytes)
[    0.317693] TCP: Hash tables configured (established 2048 bind 2048)
[    0.317782] UDP hash table entries: 256 (order: 0, 4096 bytes)
[    0.317803] UDP-Lite hash table entries: 256 (order: 0, 4096 bytes)
[    0.317960] NET: Registered protocol family 1
[    0.318387] RPC: Registered named UNIX socket transport module.
[    0.318402] RPC: Registered udp transport module.
[    0.318409] RPC: Registered tcp transport module.
[    0.318415] RPC: Registered tcp NFSv4.1 backchannel transport module.
[    0.319367] hw perfevents: enabled with armv7_cortex_a8 PMU driver, 5 counter                                                      s available
[    0.321439] futex hash table entries: 256 (order: -1, 3072 bytes)
[    0.329858] squashfs: version 4.0 (2009/01/31) Phillip Lougher
[    0.330796] NFS: Registering the id_resolver key type
[    0.330874] Key type id_resolver registered
[    0.330882] Key type id_legacy registered
[    0.330960] ntfs: driver 2.1.32 [Flags: R/O].
[    0.334733] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 2                                                      48)
[    0.334764] io scheduler noop registered
[    0.334778] io scheduler deadline registered
[    0.334936] io scheduler cfq registered (default)
[    0.336607] pinctrl-single 44e10800.pinmux: 142 pins at pa f9e10800 size 568
[    0.339467] backlight supply power not found, using dummy regulator
[    0.402551] Serial: 8250/16550 driver, 10 ports, IRQ sharing disabled
[    0.407008] 44e09000.serial: ttyS0 at MMIO 0x44e09000 (irq = 158, base_baud =                                                       3000000) is a 8250
[    1.017402] console [ttyS0] enabled
[    1.022241] 48022000.serial: ttyS1 at MMIO 0x48022000 (irq = 159, base_baud =                                                       3000000) is a 8250
[    1.032291] [drm] Initialized drm 1.1.0 20060810
[    1.039603] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
[    1.046388] [drm] No driver support for vblank timestamp query.
[    1.062150] Console: switching to colour frame buffer device 60x34
[    1.070379] tilcdc 4830e000.lcdc: fb0:  frame buffer device
[    1.105534] [drm] Initialized tilcdc 1.0.0 20121205 on minor 0
[    1.118627] loop: module loaded
[    1.124254] libphy: Fixed MDIO Bus: probed
[    1.185548] davinci_mdio 4a101000.mdio: davinci mdio revision 1.6
[    1.191692] davinci_mdio 4a101000.mdio: detected phy mask fffffffe
[    1.198739] libphy: 4a101000.mdio: probed
[    1.202836] davinci_mdio 4a101000.mdio: phy[0]: device 4a101000.mdio:00, driv                                                      er SMSC LAN8710/LAN8720
[    1.212833] cpsw 4a100000.ethernet: Detected MACID = a0:f6:fd:4c:a6:ba
[    1.220460] cpsw 4a100000.ethernet: cpsw: Detected MACID = c4:ed:ba:88:2a:92
[    1.229323] mousedev: PS/2 mouse device common for all mice
[    1.235803] i2c /dev entries driver
[    1.240462] cpuidle: enable-method property 'ti,am3352' found operations
[    1.248156] omap_hsmmc 48060000.mmc: Got CD GPIO
[    1.275714] pinctrl-single 44e10800.pinmux: bad data for mux pinmux_mmc2_pins
[    1.282895] pinctrl-single 44e10800.pinmux: no pins entries for pinmux_mmc2_p                                                      ins
[    1.317169] ledtrig-cpu: registered to indicate activity on CPUs
[    1.326062] NET: Registered protocol family 10
[    1.332076] sit: IPv6 over IPv4 tunneling driver
[    1.337708] NET: Registered protocol family 17
[    1.342503] Key type dns_resolver registered
[    1.347084] omap_voltage_late_init: Voltage driver support not added
[    1.407266] tps65910-rtc tps65910-rtc: rtc core: registered tps65910-rtc as r                                                      tc0
[    1.415401] omap_i2c 44e0b000.i2c: bus 0 rev0.11 at 400 kHz
[    1.421798] omap_hsmmc 48060000.mmc: Got CD GPIO
[    1.426953] vmmc: supplied by vbat
[    1.466351] pinctrl-single 44e10800.pinmux: bad data for mux pinmux_mmc2_pins
[    1.474750] pinctrl-single 44e10800.pinmux: no pins entries for pinmux_mmc2_p                                                      ins
[    1.513248] mmc0: host does not support reading read-only switch, assuming wr                                                      ite-enable
[    1.523416] mmc0: new high speed SDHC card at address 0001
[    1.529625] mmcblk0: mmc0:0001 AS 3.72 GiB
[    1.535990]  mmcblk0: p1 p2 p3
[    1.595934] vdd_mpu: supplied by vbat
[    1.602181] input: gpio_buttons@0 as /devices/platform/gpio_buttons@0/input/i                                                      nput0
[    1.618321] tps65910-rtc tps65910-rtc: setting system clock to 2019-04-11 15:                                                      41:17 UTC (1554997277)
[    1.639403] lis3_reg: disabling
[    1.655736] ALSA device list:
[    1.658725]   No soundcards found.
[    1.678270] EXT4-fs (mmcblk0p2): couldn't mount as ext3 due to feature incomp                                                      atibilities
[    1.696893] EXT4-fs (mmcblk0p2): couldn't mount as ext2 due to feature incomp                                                      atibilities
[    1.918459] EXT4-fs (mmcblk0p2): recovery complete
[    1.926817] EXT4-fs (mmcblk0p2): mounted filesystem with ordered data mode. O                                                      pts: (null)
[    1.945553] VFS: Mounted root (ext4 filesystem) on device 179:2.
[    1.951741] devtmpfs: mounted
[    1.955142] Freeing unused kernel memory: 260K (c08b1000 - c08f2000)
[    1.975513] This architecture does not have kernel memory protection.

INIT: version 2.88 booting

Starting udev

[    2.626491] udevd[78]: starting version 3.2.7
[    2.632958] random: udevd: uninitialized urandom read (16 bytes read, 19 bits                                                       of entropy available)
[    2.655617] random: udevd: uninitialized urandom read (16 bytes read, 19 bits                                                       of entropy available)
[    2.675821] random: udevd: uninitialized urandom read (16 bytes read, 20 bits                                                       of entropy available)
[    2.685085] random: udevd: uninitialized urandom read (16 bytes read, 20 bits                                                       of entropy available)
[    2.730297] udevd[78]: specified group 'kvm' unknown
[    2.798310] udevd[79]: starting eudev-3.2.7
[    3.062517] random: udevd: uninitialized urandom read (16 bytes read, 23 bits                                                       of entropy available)
[    3.095948] random: udevd: uninitialized urandom read (16 bytes read, 23 bits                                                       of entropy available)
[    3.128747] udevd[79]: specified group 'kvm' unknown
[    4.544886] EXT4-fs (mmcblk0p2): re-mounted. Opts: data=ordered
[    5.086681] random: dd: uninitialized urandom read (512 bytes read, 36 bits o                                                      f entropy available)

INIT: Entering runlevel: 5

Configuring network interfaces... [ 5.281526] net eth0: initializing cpsw ver sion 1.12 (0)

[    5.286963] net eth0: initialized cpsw ale version 1.4
[    5.292126] net eth0: ALE Table size 1024
[    5.299577] net eth0: phy found : id is : 0x7c0f1
[    5.312916] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready

udhcpc: started, v1.30.1

udhcpc: sending discover

udhcpc: sending discover

udhcpc: sending discover

udhcpc: no lease, forking to background

done.

Starting system message bus: [ 14.818015] random: dbus-daemon: uninitialized urandom read (12 bytes read, 53 bits of entropy available)

[   14.841904] random: dbus-daemon: uninitialized urandom read (12 bytes read, 53 bits of entropy available)

dbus.

Starting Xserver

Starting syslogd/klogd:

done

X.Org X Server 1.20.4

X Protocol Version 11, Revision 0

Build Operating System: Linux 4.15.0-45-generic x86_64

Current Operating System: Linux am335x-evm 4.4.19-ge581bb1cac #1 PREEMPT Thu May 24 11:42:17 CEST 2018 armv7l

Kernel command line: console=ttyO0,115200 root=/dev/mmcblk0p2 rw

Build Date: 10 April 2019 08:15:46PM

Current version of pixman: 0.38.0

Before reporting problems, check http://wiki.x.org

to make sure that you have the latest version.

Markers: (--) probed, (**) from config file, (==) default setting,

(++) from command line, (!!) notice, (II) informational,

(WW) warning, (EE) error, (NI) not implemented, (??) unknown.

(==) Log file: "/var/log/Xorg.0.log", Time: Thu Apr 11 15:41:31 2019

(==) Using config file: "/etc/X11/xorg.conf"

(==) Using system config directory "/usr/share/X11/xorg.conf.d"

Poky (Yocto Project Reference Distro) 2.6+snapshot am335x-evm /dev/ttyS0

am335x-evm login: The XKEYBOARD keymap compiler (xkbcomp) reports:

Quoted 7 lines

Warning: Unsupported high keycode 372 for name <I372> ignored

X11 cannot support keycodes above 255.

This warning only shows for the first high keycode.

Internal error:   Could not resolve keysym XF86MonBrightnessCycle

Errors from xkbcomp are not fatal to the X server

[   15.951736] random: dbus-daemon: uninitialized urandom read (12 bytes read, 67 bits of entropy available)

D-BUS per-session daemon address is: unix:abstract=/tmp/dbus-AntF8uRBJQ,guid=2087fb970fdb264af1e4e5315caf602b

Size 1024x768 not found in available modes

Error: No calibratable devices found.

matchbox: Cant find a keycode for keysym 269025056

matchbox: ignoring key shortcut XF86Calendar=!$contacts

matchbox: Cant find a keycode for keysym 2809

matchbox: ignoring key shortcut telephone=!$dates

matchbox: Cant find a keycode for keysym 269025050

matchbox: ignoring key shortcut XF86Start=!matchbox-remote -desktop

dbus-daemon[282]: Activating service name='org.a11y.atspi.Registry' requested by ':1.0' (uid=0 pid=278 comm="matchbox-terminal ")

dbus-daemon[282]: Successfully activated service 'org.a11y.atspi.Registry'

SpiRegistry daemon is running with well-known name - org.a11y.atspi.Registry

[   41.825592] random: nonblocking pool is initialized

Nikola.

De : Zoran Stojsavljevic <[email protected]>
Envoyé : lundi 8 avril 2019 08:07
À : Stanisavljevic <[email protected]>
Cc : Yocto Project <[email protected]>; Marc Ferland <[email protected]> Objet : Re: [yocto] yocto touchscreen

Hello Nikola,

I did some quick analysis of your kernel boot traces, and there are the following observations made:

[1] The kernel used is:
Linux version 4.4.19-ge581bb1cac (polycaptil@polycaptil-HP-Notebook) ?!

In my case (I built YOCTO thud for BBB NOT using X11, only serial console):
Linux version 4.19.7-jumpnow (oe-user@oe-host) (gcc version 8.2.0 (GCC))

I could not explain polycaptil@polycaptil-HP-Notebook, maybe you do it for such kind of platform... The kernel used is too old, for my taste, you did not replaced it, if you built YOCTO thud!

[2] The kernel command line:

[    0.000000] Kernel command line: console=ttyO0,115200 root=/dev/mmcblk0p2 rw

Shows that you use EMMC as holder for / tree, all good.

[3] The concern about your console: console=ttyO0,115200 Is addressed here:

[    0.000441] WARNING: Your 'console=ttyO0' has been replaced by 'ttyS0'

Later followed by:

[    0.402495] Serial: 8250/16550 driver, 10 ports, IRQ sharing disabled
[    0.406968] 44e09000.serial: ttyS0 at MMIO 0x44e09000 (irq = 158, base_baud = 3000000) is a 8250
[    1.017361] console [ttyS0] enabled
[    1.022188] 48022000.serial: ttyS1 at MMIO 0x48022000 (irq = 159, base_baud = 3000000) is a 8250

So, not at all worries about the console!

[4] The following traces are worrying me very much:

Starting Xserver
Starting syslogd/klogd:
done
X.Org X Server 1.20.1
X Protocol Version 11, Revision 0
Build Operating System: Linux 4.15.0-45-generic x86_64
Current Operating System: Linux am335x-evm 4.4.19-ge581bb1cac #1 PREEMPT Thu May 24 11:42:17 CEST 2018 armv7l Kernel command line: console=ttyO0,115200 root=/dev/mmcblk0p2 rw
Build Date: 02 April 2019 07:35:10PM

As Marc wrote earlier:

Quoted 1 line

Looks like: https://bugzilla.redhat.com/show_bug.cgi?id=1650634

So, as I stated before: you should have in your build:

X.Org Server 1.20.3! This is the main problem, seems!

Zoran

_______

On Fri, Apr 5, 2019 at 3:35 PM Stanisavljevic <[email protected] <mailto:[email protected]> > wrote:

Hello Zoran,

I keep you in touch about the migration from sumo to thud to solve my problem of locked touchscreen.

I migrated from sumo to thud version, but nothing changed, the problem is the same, and I have same messages on boot as sumo version.

I looked that the x server have a configuration kernel command line (if I correctly understood), here is what is written :

Kernel command line: console=ttyO0,115200 root=/dev/mmcblk0p2 rw

But the kernel command line of poky is different, here is what is configured for poky kernel command line :

Poky (Yocto Project Reference Distro) 2.6.1 am335x-evm /dev/ttyS0

For the xserver it is ttyO0 and for poky it is ttyS0, maybe there is something wrong here which do problem for the touchscreen.

I put below (at end of this mail )the text which appear during the boot.

I think xorg-x11-server package 1.20.3 was not the problem in the previous yocto version (sumo)…

Best regards

Nikola

Here is the text that appear during the boot :

root@am335x-evm:~# CCCCCCCCCCCCCCCCCCCCCCCC

U-Boot SPL 2017.05-00001-g041a398 (May 02 2018 - 18:36:57)

Trying to boot from MMC1

reading uboot.env

reading u-boot.img

reading u-boot.img

reading u-boot.img

reading u-boot.img

U-Boot 2017.05-00001-g041a398 (May 02 2018 - 18:36:57 +0200)

CPU : AM335X-GP rev 2.1

Model: TI AM335x EVM-SK

DRAM: 256 MiB

NAND: 0 MiB

MMC: OMAP SD/MMC: 0, OMAP SD/MMC: 1

reading uboot.env

ERROR: No USB device found

at drivers/usb/gadget/ether.c:2709/usb_ether_init()

Net: CACHE: Misaligned operation at range [8df323c0, 8df32464]

Warning: ethernet@4a100000 using MAC address from ROM

eth0: ethernet@4a100000

Hit any key to stop autoboot: 0

reading zImage

3412752 bytes read in 252 ms (12.9 MiB/s)

reading dtb

39733 bytes read in 12 ms (3.2 MiB/s)

## Flattened Device Tree blob at 82000000

Booting using the fdt blob at 0x82000000

Loading Device Tree to 8df19000, end 8df25b34 ... OK

Starting kernel ...

[    0.000000] Booting Linux on physical CPU 0x0
[    0.000000] Initializing cgroup subsys cpu
[    0.000000] Initializing cgroup subsys cpuacct
[    0.000000] Linux version 4.4.19-ge581bb1cac (polycaptil@polycaptil-HP-Notebook) (gcc version 5.3.0 (GCC) ) #1 PREEMPT Thu May 24 11:42:17 CEST 2018
[    0.000000] CPU: ARMv7 Processor [413fc082] revision 2 (ARMv7), cr=10c5387d
[    0.000000] CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instruction cache
[    0.000000] Machine model: TI AM335x EVM-SK
[    0.000000] cma: Reserved 48 MiB at 0x8a800000
[    0.000000] Memory policy: Data cache writeback
[    0.000000] CPU: All CPU(s) started in SVC mode.
[    0.000000] AM335X ES2.1 (sgx neon )
[    0.000000] Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 64960
[    0.000000] Kernel command line: console=ttyO0,115200 root=/dev/mmcblk0p2 rw
[    0.000000] PID hash table entries: 1024 (order: 0, 4096 bytes)
[    0.000000] Dentry cache hash table entries: 32768 (order: 5, 131072 bytes)
[    0.000000] Inode-cache hash table entries: 16384 (order: 4, 65536 bytes)
[    0.000000] Memory: 200444K/262144K available (6495K kernel code, 313K rwdata, 2368K rodata, 260K init, 265K bss, 12548K reserved, 49152K cma-reserved, 0K highmem)
[    0.000000] Virtual kernel memory layout:
[    0.000000]     vector  : 0xffff0000 - 0xffff1000   (   4 kB)
[    0.000000]     fixmap  : 0xffc00000 - 0xfff00000   (3072 kB)
[    0.000000]     vmalloc : 0xd0800000 - 0xff800000   ( 752 MB)
[    0.000000]     lowmem  : 0xc0000000 - 0xd0000000   ( 256 MB)
[    0.000000]     pkmap   : 0xbfe00000 - 0xc0000000   (   2 MB)
[    0.000000]     modules : 0xbf000000 - 0xbfe00000   (  14 MB)
[    0.000000]       .text : 0xc0008000 - 0xc08b0034   (8865 kB)
[    0.000000]       .init : 0xc08b1000 - 0xc08f2000   ( 260 kB)
[    0.000000]       .data : 0xc08f2000 - 0xc09407f0   ( 314 kB)
[    0.000000]        .bss : 0xc09407f0 - 0xc0982d58   ( 266 kB)
[    0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=1, Nodes=1
[    0.000000] Preemptible hierarchical RCU implementation.
[    0.000000]  Build-time adjustment of leaf fanout to 32.
[    0.000000] NR_IRQS:16 nr_irqs:16 16
[    0.000000] IRQ: Found an INTC at 0xfa200000 (revision 5.0) with 128 interrupts
[    0.000000] OMAP clockevent source: timer2 at 24000000 Hz
[    0.000016] sched_clock: 32 bits at 24MHz, resolution 41ns, wraps every 89478484971ns
[    0.000036] clocksource: timer1: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 79635851949 ns
[    0.000047] OMAP clocksource: timer1 at 24000000 Hz
[    0.000222] clocksource_probe: no matching clocksources found
[    0.000415] Console: colour dummy device 80x30
[    0.000441] WARNING: Your 'console=ttyO0' has been replaced by 'ttyS0'
[    0.000447] This ensures that you still see kernel messages. Please
[    0.000453] update your kernel commandline.
[    0.000473] Calibrating delay loop... 795.44 BogoMIPS (lpj=3977216)
[    0.089067] pid_max: default: 32768 minimum: 301
[    0.089198] Mount-cache hash table entries: 1024 (order: 0, 4096 bytes)
[    0.089210] Mountpoint-cache hash table entries: 1024 (order: 0, 4096 bytes)
[    0.089932] Initializing cgroup subsys io
[    0.089965] Initializing cgroup subsys memory
[    0.090003] Initializing cgroup subsys devices
[    0.090020] Initializing cgroup subsys freezer
[    0.090035] Initializing cgroup subsys perf_event
[    0.090047] Initializing cgroup subsys pids
[    0.090074] CPU: Testing write buffer coherency: ok
[    0.090499] Setting up static identity map for 0x80008200 - 0x80008258
[    0.092669] devtmpfs: initialized
[    0.105440] VFP support v0.3: implementor 41 architecture 3 part 30 variant c rev 3
[    0.120496] omap_hwmod: debugss: _wait_target_disable failed
[    0.175552] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns
[    0.179889] pinctrl core: initialized pinctrl subsystem
[    0.181246] NET: Registered protocol family 16
[    0.183446] DMA: preallocated 256 KiB pool for atomic coherent allocations
[    0.209067] cpuidle: using governor ladder
[    0.239055] cpuidle: using governor menu
[    0.243662] OMAP GPIO hardware version 0.1
[    0.254349] hw-breakpoint: debug architecture 0x4 unsupported.
[    0.297650] edma 49000000.edma: TI EDMA DMA engine driver
[    0.298630] reg-fixed-voltage fixedregulator@2: could not find pctldev for node /ocp/l4_wkup@44c00000/scm@210000/pinmux@800/pinmux_wl12xx_gpio, deferring probe
[    0.302384] omap_i2c 44e0b000.i2c: could not find pctldev for node /ocp/l4_wkup@44c00000/scm@210000/pinmux@800/pinmux_i2c0_pins, deferring probe
[    0.302543] media: Linux media interface: v0.10
[    0.302609] Linux video capture interface: v2.00
[    0.302660] pps_core: LinuxPPS API ver. 1 registered
[    0.302668] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <[email protected] <mailto:[email protected]> >
[    0.302699] PTP clock support registered
[    0.302764] EDAC MC: Ver: 3.0.0
[    0.303981] omap-mailbox 480c8000.mailbox: omap mailbox rev 0x400
[    0.304343] Advanced Linux Sound Architecture Driver Initialized.
[    0.305508] clocksource: Switched to clocksource timer1
[    0.316757] NET: Registered protocol family 2
[    0.317569] TCP established hash table entries: 2048 (order: 1, 8192 bytes)
[    0.317608] TCP bind hash table entries: 2048 (order: 1, 8192 bytes)
[    0.317636] TCP: Hash tables configured (established 2048 bind 2048)
[    0.317718] UDP hash table entries: 256 (order: 0, 4096 bytes)
[    0.317738] UDP-Lite hash table entries: 256 (order: 0, 4096 bytes)
[    0.317898] NET: Registered protocol family 1
[    0.318323] RPC: Registered named UNIX socket transport module.
[    0.318337] RPC: Registered udp transport module.
[    0.318344] RPC: Registered tcp transport module.
[    0.318350] RPC: Registered tcp NFSv4.1 backchannel transport module.
[    0.319303] hw perfevents: enabled with armv7_cortex_a8 PMU driver, 5 counters available
[    0.321370] futex hash table entries: 256 (order: -1, 3072 bytes)
[    0.329774] squashfs: version 4.0 (2009/01/31) Phillip Lougher
[    0.330714] NFS: Registering the id_resolver key type
[    0.330792] Key type id_resolver registered
[    0.330801] Key type id_legacy registered
[    0.330881] ntfs: driver 2.1.32 [Flags: R/O].
[    0.334651] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 248)
[    0.334684] io scheduler noop registered
[    0.334698] io scheduler deadline registered
[    0.334855] io scheduler cfq registered (default)
[    0.336527] pinctrl-single 44e10800.pinmux: 142 pins at pa f9e10800 size 568
[    0.339377] backlight supply power not found, using dummy regulator
[    0.402495] Serial: 8250/16550 driver, 10 ports, IRQ sharing disabled
[    0.406968] 44e09000.serial: ttyS0 at MMIO 0x44e09000 (irq = 158, base_baud = 3000000) is a 8250
[    1.017361] console [ttyS0] enabled
[    1.022188] 48022000.serial: ttyS1 at MMIO 0x48022000 (irq = 159, base_baud = 3000000) is a 8250
[    1.032233] [drm] Initialized drm 1.1.0 20060810
[    1.039551] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
[    1.046337] [drm] No driver support for vblank timestamp query.
[    1.062083] Console: switching to colour frame buffer device 60x34
[    1.070316] tilcdc 4830e000.lcdc: fb0:  frame buffer device
[    1.105532] [drm] Initialized tilcdc 1.0.0 20121205 on minor 0
[    1.118602] loop: module loaded
[    1.124221] libphy: Fixed MDIO Bus: probed
[    1.185547] davinci_mdio 4a101000.mdio: davinci mdio revision 1.6
[    1.191690] davinci_mdio 4a101000.mdio: detected phy mask fffffffe
[    1.198754] libphy: 4a101000.mdio: probed
[    1.202851] davinci_mdio 4a101000.mdio: phy[0]: device 4a101000.mdio:00, driver SMSC LAN8710/LAN8720
[    1.212830] cpsw 4a100000.ethernet: Detected MACID = a0:f6:fd:4c:a6:ba
[    1.220461] cpsw 4a100000.ethernet: cpsw: Detected MACID = c4:ed:ba:88:2a:92
[    1.229313] mousedev: PS/2 mouse device common for all mice
[    1.235792] i2c /dev entries driver
[    1.240448] cpuidle: enable-method property 'ti,am3352' found operations
[    1.248143] omap_hsmmc 48060000.mmc: Got CD GPIO
[    1.275713] pinctrl-single 44e10800.pinmux: bad data for mux pinmux_mmc2_pins
[    1.282895] pinctrl-single 44e10800.pinmux: no pins entries for pinmux_mmc2_pins
[    1.317167] ledtrig-cpu: registered to indicate activity on CPUs
[    1.326065] NET: Registered protocol family 10
[    1.332086] sit: IPv6 over IPv4 tunneling driver
[    1.337713] NET: Registered protocol family 17
[    1.342528] Key type dns_resolver registered
[    1.347114] omap_voltage_late_init: Voltage driver support not added
[    1.407191] tps65910-rtc tps65910-rtc: rtc core: registered tps65910-rtc as rtc0
[    1.415327] omap_i2c 44e0b000.i2c: bus 0 rev0.11 at 400 kHz
[    1.421710] omap_hsmmc 48060000.mmc: Got CD GPIO
[    1.426857] vmmc: supplied by vbat
[    1.466348] pinctrl-single 44e10800.pinmux: bad data for mux pinmux_mmc2_pins
[    1.474748] pinctrl-single 44e10800.pinmux: no pins entries for pinmux_mmc2_pins
[    1.513242] mmc0: host does not support reading read-only switch, assuming write-enable
[    1.523406] mmc0: new high speed SDHC card at address 0001
[    1.529619] mmcblk0: mmc0:0001 AS 3.72 GiB
[    1.535970]  mmcblk0: p1 p2 p3
[    1.595927] vdd_mpu: supplied by vbat
[    1.602118] input: gpio_buttons@0 as /devices/platform/gpio_buttons@0/input/input0
[    1.618310] tps65910-rtc tps65910-rtc: setting system clock to 2019-04-03 08:25:12 UTC (1554279912)
[    1.639397] lis3_reg: disabling
[    1.655734] ALSA device list:
[    1.658723]   No soundcards found.
[    1.678283] EXT4-fs (mmcblk0p2): couldn't mount as ext3 due to feature incompatibilities
[    1.696903] EXT4-fs (mmcblk0p2): couldn't mount as ext2 due to feature incompatibilities
[    1.792693] EXT4-fs (mmcblk0p2): recovery complete
[    1.807446] EXT4-fs (mmcblk0p2): mounted filesystem with ordered data mode. Opts: (null)
[    1.821463] VFS: Mounted root (ext4 filesystem) on device 179:2.
[    1.835669] devtmpfs: mounted
[    1.839073] Freeing unused kernel memory: 260K (c08b1000 - c08f2000)
[    1.851956] This architecture does not have kernel memory protection.

INIT: version 2.88 booting

Starting udev

[    2.513624] udevd[78]: starting version 3.2.5
[    2.527632] random: udevd: uninitialized urandom read (16 bytes read, 18 bits of entropy available)
[    2.546992] random: udevd: uninitialized urandom read (16 bytes read, 18 bits of entropy available)
[    2.566829] random: udevd: uninitialized urandom read (16 bytes read, 18 bits of entropy available)
[    2.585755] random: udevd: uninitialized urandom read (16 bytes read, 18 bits of entropy available)
[    2.668211] udevd[79]: starting eudev-3.2.5
[    3.036159] random: udevd: uninitialized urandom read (16 bytes read, 21 bits of entropy available)
[    3.061761] random: udevd: uninitialized urandom read (16 bytes read, 21 bits of entropy available)
[    4.494682] EXT4-fs (mmcblk0p2): re-mounted. Opts: data=ordered
[    5.052098] random: dd: uninitialized urandom read (512 bytes read, 34 bits of entropy available)

INIT: Entering runlevel: 5

Configuring network interfaces... [ 5.254308] net eth0: initializing cpsw version 1.12 (0)

[    5.259812] net eth0: initialized cpsw ale version 1.4
[    5.264976] net eth0: ALE Table size 1024
[    5.272411] net eth0: phy found : id is : 0x7c0f1
[    5.285702] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready

udhcpc: started, v1.29.2

udhcpc: sending discover

udhcpc: sending discover

udhcpc: sending discover

udhcpc: no lease, forking to background

done.

Starting system message bus: [ 14.793334] random: dbus-daemon: uninitialized urandom read (12 bytes read, 51 bits of entropy available)

[   14.831748] random: dbus-daemon: uninitialized urandom read (12 bytes read, 52 bits of entropy available)

dbus.

Starting Xserver

Starting syslogd/klogd:

done

X.Org X Server 1.20.1

X Protocol Version 11, Revision 0

Build Operating System: Linux 4.15.0-45-generic x86_64

Current Operating System: Linux am335x-evm 4.4.19-ge581bb1cac #1 PREEMPT Thu May 24 11:42:17 CEST 2018 armv7l

Kernel command line: console=ttyO0,115200 root=/dev/mmcblk0p2 rw

Build Date: 02 April 2019 07:35:10PM

Current version of pixman: 0.34.0

Before reporting problems, check http://wiki.x.org

to make sure that you have the latest version.

Markers: (--) probed, (**) from config file, (==) default setting,

(++) from command line, (!!) notice, (II) informational,

(WW) warning, (EE) error, (NI) not implemented, (??) unknown.

(==) Log file: "/var/log/Xorg.0.log", Time: Wed Apr 3 08:25:25 2019

(==) Using config file: "/etc/X11/xorg.conf"

(==) Using system config directory "/usr/share/X11/xorg.conf.d"

Poky (Yocto Project Reference Distro) 2.6.1 am335x-evm /dev/ttyS0

am335x-evm login: The XKEYBOARD keymap compiler (xkbcomp) reports:

Quoted 5 lines

Warning: Unsupported high keycode 372 for name <I372> ignored

X11 cannot support keycodes above 255.

This warning only shows for the first high keycode.

Errors from xkbcomp are not fatal to the X server

[   15.888959] random: dbus-daemon: uninitialized urandom read (12 bytes read, 65 bits of entropy available)

D-BUS per-session daemon address is: unix:abstract=/tmp/dbus-JjEW6Wgjtx,guid=87af020e5c6f1a7e21d449e55ca46df5

Size 1024x768 not found in available modes

Error: No calibratable devices found.

matchbox: Cant find a keycode for keysym 269025056

matchbox: ignoring key shortcut XF86Calendar=!$contacts

matchbox: Cant find a keycode for keysym 2809

matchbox: ignoring key shortcut telephone=!$dates

matchbox: Cant find a keycode for keysym 269025050

matchbox: ignoring key shortcut XF86Start=!matchbox-remote -desktop

Failed to launch bus: Failed to execute child process ?/usr/bin? (Permission denied)

(matchbox-terminal:274): dbind-WARNING **: 08:25:27.404: Error retrieving accessibility bus address: org.a11y.Bus.Error: Failed to execute child process ?/usr/bin? (Permission denied)

[   43.718127] random: nonblocking pool is initialized

De : Stanisavljevic <[email protected] <mailto:[email protected]> >
Envoyé : lundi 18 février 2019 15:27
À : 'Zoran Stojsavljevic' <[email protected] <mailto:[email protected]> >
Cc : 'Yocto Project' <[email protected] <mailto:[email protected]> >; 'Marc Ferland' <[email protected] <mailto:[email protected]> > Objet : RE: [yocto] yocto touchscreen

Hello Zoran

I will try these 2 ways.

Of course, the second way is the easiest, but I will try also the first way only to see if it is possible.

I will keep you in touch if the first way can work.

Best regards,

Nikola

De : Zoran Stojsavljevic < <mailto:[email protected]> [email protected]>
Envoyé : lundi 18 février 2019 15:21
À : Stanisavljevic < <mailto:[email protected]> [email protected]>
Cc : Yocto Project < <mailto:[email protected]> [email protected]>; Marc Ferland < <mailto:[email protected]> [email protected]> Objet : Re: [yocto] yocto touchscreen

Hello Nikola,

Two things, which immediately came to my mind:

[1 - Harder way] Either to change xorg-x11-server in sumo to match at least xorg-x11-server 1.20.3;

(harder way, since few people know exact dependencies among various GFX packages, and what

and how many packages need to be also changed to make xorg-x11-server 1.20.3 to work)

[2 - Easier Way] Either to migrate YOCTO to Thud, where the correct xorg-x11-server package 1.20.3

is already fixed and set!

(easier way, since exact dependencies among various GFX packages are already set for 1.20.3)

Best Regards,

Zoran

_______

On Mon, Feb 18, 2019 at 2:48 PM Stanisavljevic < <mailto:[email protected]> [email protected]> wrote:

Thank you Zoran for trying to help me.
I tried to resolve the problem, but I didn’t succeed yet, I think I will to continue, and If after some time I find nothing, I’m going to migrate to the thud version.

I will maybe try to use Bugzilla

Nikola

De : Zoran Stojsavljevic < <mailto:[email protected]> [email protected]>
Envoyé : mardi 5 février 2019 19:28
À : Stanisavljevic < <mailto:[email protected]> [email protected]>
Cc : Yocto Project < <mailto:[email protected]> [email protected]>; <mailto:[email protected]> [email protected] Objet : Re: [yocto] yocto touchscreen

Hello Nikola,

Let us try to cut to the chase!

After reading what Marc Ferland says/writes, and looking into the following:
<https://bugzilla.redhat.com/show_bug.cgi?id=1650634> https://bugzilla.redhat.com/show_bug.cgi?id=1650634

I have spotted the following:

Pat Riehecky 2018-11-20 14:28:22 UTC

the bug remains with the elrepo kernels:
kernel-ml-4.19.2-1.el7.elrepo.x86_64
kernel-lt-4.4.163-1.el7.elrepo.x86_64

I never had this problem since I do not use Xorg (GFX), rather I only

use serial console from VBox VM from my BBB (pass-through).

Thus, my suggestion for you, to skip the whole mess is to rebuild your

distro in the light of YOCTO Project 2.6.1 (thud 20.0.0.1).

My best guess (then you'll inherit YOCTO kernel 4.20.x with fixed Xorg - X11).

I am using Fedora 29 on my laptop. Also from the bugzilla:

Pat Riehecky 2018-11-20 15:46:11 UTC

Bug resolved by rebuilding xorg-x11-server-1.20.3-1.fc29 [1] for 7.6.

With this in mind it appears to be an Xorg server bug rather than fbdev.

From my HP EliteBook 840 G1 Fedora 29, Xorg.0.log - February 5th, 2019.,

I have the following:

[    26.955] Kernel command line: BOOT_IMAGE=/vmlinuz-4.20.6-200.fc29.x86_64

root=/dev/mapper/fedora-root ro <http://rd.lvm.lv> rd.lvm.lv=fedora/root <http://rd.lvm.lv> rd.lvm.lv=fedora/swap rhgb

quiet LANG=en_US.UTF-8

[    26.955] Build Date: 11 January 2019  12:47:38PM
[    26.955] Build ID: xorg-x11-server 1.20.3-3.fc29
[    26.955] Current version of pixman: 0.34.0

Best Regards,
Zoran
_______

Quoted 696 lines · On Tue, Feb 5, 2019 at 2:49 PM Zoran Stojsavljevic <…

Hello Nikola,

Quoted 5 lines

I created a kernel recipe with a bbappend file, and, I added the same defconfig that I used for krogoth version. The bbappend for kernel recipe concern meta-ti layer. I didn't edited defconfig file in other layers which contain a kernel recipe.

It could be some problem that Sumo does not take your bbappend file into the consideration as placed.

It could be something else, as well.

I have the same issue with my defconfig file for my Thud Beagle Bone Black (BBB) standard board. Every time I recompile my YOCTO for it for different releases, I need to import my specific defconfig. But I use complete different repos for my standard Beagle Bone Black than YOCTO BBB Poky reference distro.

Here is what I use in Thud (my bblayers.conf):

POKY_BBLAYERS_CONF_VERSION = "2"
BBPATH = "${TOPDIR}"
BBFILES ?= ""

BBLAYERS ?= " \
    /home/user/projects2/beaglebone-black/yocto-thud/meta-bbb \
    /home/user/projects2/beaglebone-black/yocto-thud/meta-openembedded/meta-networking \
    /home/user/projects2/beaglebone-black/yocto-thud/meta-openembedded/meta-oe \
    /home/user/projects2/beaglebone-black/yocto-thud/meta-openembedded/meta-python \
    /home/user/projects2/beaglebone-black/yocto-thud/meta-qt5 \
    /home/user/projects2/beaglebone-black/yocto-thud/poky/meta \
    /home/user/projects2/beaglebone-black/yocto-thud/poky/meta-poky"

There, I replace defconfig in this layer: /home/user/projects2/beaglebone-black/yocto-thud/meta-bbb with my own defconfig.

In the directory:
/home/user/projects2/beaglebone-black/yocto-thud/meta-bbb/recipes-kernel/linux/linux-stable-4.19/beaglebone

If you use only Poky repository, then you need to read the following paragraph (how to use your defconfig with Poky):

[2.3.3. Changing the Configuration] YOCTO Project Linux Development Manual
<https://www.yoctoproject.org/docs/2.5/kernel-dev/kernel-dev.html#using-an-in-tree-defconfig-file> https://www.yoctoproject.org/docs/2.5/kernel-dev/kernel-dev.html#using-an-in-tree-defconfig-file
2.3.3. Changing the Configuration

I hope this will help. Please, keep us posted!

Zoran
_______

Quoted 642 lines · On Tue, Feb 5, 2019 at 10:54 AM Stanisavljevic <…

Hy Zoran

Thank's to take time to answer

I created a kernel recipe with a bbappend file, and, I added the same defconfig that I used for krogoth version. The bbappend for kernel recipe concern meta-ti layer.
I didn't edited defconfig file in other layers which contain a kernel recipe.

I think it's a problem which concern the screen resolution, screen frequency and adc touchscreen. Something is different between the krogoth and sumo version, but I didn't find what is changed...

Xrandr show that problem is maybe around the screen resolution.
It's show the next message : "Size 1024x768 not found in available modes"
Maybe it was changed between krogoth and sumo version...but I don't know where it is indicated if sources files...

What do you think ? problem can be around the screen resolution, screen frequency and adc touchscreen ?

Nikola

-----Message d'origine-----
De : Zoran Stojsavljevic < <mailto:[email protected]> [email protected]> Envoyé : lundi 4 février 2019 17:08
À : Stanisavljevic < <mailto:[email protected]> [email protected]> Cc : Yocto Project < <mailto:[email protected]> [email protected]> Objet : Re: [yocto] yocto touchscreen

Quoted 5 lines

I built a first version of this os with version krogoth and it works fine.

Now I build a second version of this os with version sumo and the touch screen works fine during boot process but when kernel is loaded, touchscreen freeze / lock and impossible to use it.

Did you compare Krogoth kernel defconfig with Sumo kernel defconfig?

May there are some mismatches in drivers' setup between these two?

Zoran
_______

Quoted 600 lines · On Mon, Feb 4, 2019 at 12:24 PM Stanisavljevic <…

Hy Team,

I have a problem

I buid a custom os for AM335x processor and I used yocto to do it.

I build a first version of this os with version krogoth and it work fine.

Now I build a second version of this os with version sumo and the touchscreen work fine during boot process but when kernel is loaded, touchscreen freeze / lock and impossible to use it.

The terminal is printed on the touchscreen but the screen is locked, impossible to write a command or to move the mouse to select, ….

Here is the log of boot to the user session (log got with serial communication between PC and board) :

U-Boot SPL 2017.05-00001-g041a398 (May 02 2018 - 18:36:57)

Trying to boot from MMC1

reading uboot.env

reading u-boot.img

reading u-boot.img

reading u-boot.img

reading u-boot.img

U-Boot 2017.05-00001-g041a398 (May 02 2018 - 18:36:57 +0200)

CPU : AM335X-GP rev 2.1

Model: TI AM335x EVM-SK

DRAM: 256 MiB

NAND: 0 MiB

MMC: OMAP SD/MMC: 0, OMAP SD/MMC: 1

reading uboot.env

ERROR: No USB device found

at drivers/usb/gadget/ether.c:2709/usb_ether_init()

Net: CACHE: Misaligned operation at range [8df323c0, 8df32464]

Warning: ethernet@4a100000 using MAC address from ROM

eth0: ethernet@4a100000

Hit any key to stop autoboot: 0

reading zImage

3412752 bytes read in 251 ms (13 MiB/s)

reading dtb

39733 bytes read in 12 ms (3.2 MiB/s)

## Flattened Device Tree blob at 82000000

Booting using the fdt blob at 0x82000000

Loading Device Tree to 8df19000, end 8df25b34 ... OK

Starting kernel ...

[    0.000000] Booting Linux on physical CPU 0x0
[    0.000000] Initializing cgroup subsys cpu
[    0.000000] Initializing cgroup subsys cpuacct
[    0.000000] Linux version 4.4.19-ge581bb1cac (polycaptil@polycaptil-HP-Notebook) (gcc version 5.3.0 (GCC) ) #1 PREEMPT Thu May 24 11:42:17 CEST 2018
[    0.000000] CPU: ARMv7 Processor [413fc082] revision 2 (ARMv7), cr=10c5387d
[    0.000000] CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instruction cache
[    0.000000] Machine model: TI AM335x EVM-SK
[    0.000000] cma: Reserved 48 MiB at 0x8a800000
[    0.000000] Memory policy: Data cache writeback
[    0.000000] CPU: All CPU(s) started in SVC mode.
[    0.000000] AM335X ES2.1 (sgx neon )
[    0.000000] Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 64960
[    0.000000] Kernel command line: console=ttyO0,115200 root=/dev/mmcblk0p3 rw
[    0.000000] PID hash table entries: 1024 (order: 0, 4096 bytes)
[    0.000000] Dentry cache hash table entries: 32768 (order: 5, 131072 bytes)
[    0.000000] Inode-cache hash table entries: 16384 (order: 4, 65536 bytes)
[    0.000000] Memory: 200444K/262144K available (6495K kernel code, 313K rwdata, 2368K rodata, 260K init, 265K bss, 12548K reserved, 49152K cma-reserved, 0K highmem)
[    0.000000] Virtual kernel memory layout:
[    0.000000]     vector  : 0xffff0000 - 0xffff1000   (   4 kB)
[    0.000000]     fixmap  : 0xffc00000 - 0xfff00000   (3072 kB)
[    0.000000]     vmalloc : 0xd0800000 - 0xff800000   ( 752 MB)
[    0.000000]     lowmem  : 0xc0000000 - 0xd0000000   ( 256 MB)
[    0.000000]     pkmap   : 0xbfe00000 - 0xc0000000   (   2 MB)
[    0.000000]     modules : 0xbf000000 - 0xbfe00000   (  14 MB)
[    0.000000]       .text : 0xc0008000 - 0xc08b0034   (8865 kB)
[    0.000000]       .init : 0xc08b1000 - 0xc08f2000   ( 260 kB)
[    0.000000]       .data : 0xc08f2000 - 0xc09407f0   ( 314 kB)
[    0.000000]        .bss : 0xc09407f0 - 0xc0982d58   ( 266 kB)
[    0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=1, Nodes=1
[    0.000000] Preemptible hierarchical RCU implementation.
[    0.000000]  Build-time adjustment of leaf fanout to 32.
[    0.000000] NR_IRQS:16 nr_irqs:16 16
[    0.000000] IRQ: Found an INTC at 0xfa200000 (revision 5.0) with 128 interrupts
[    0.000000] OMAP clockevent source: timer2 at 24000000 Hz
[    0.000015] sched_clock: 32 bits at 24MHz, resolution 41ns, wraps every 89478484971ns
[    0.000036] clocksource: timer1: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 79635851949 ns
[    0.000047] OMAP clocksource: timer1 at 24000000 Hz
[    0.000222] clocksource_probe: no matching clocksources found
[    0.000415] Console: colour dummy device 80x30
[    0.000442] WARNING: Your 'console=ttyO0' has been replaced by 'ttyS0'
[    0.000448] This ensures that you still see kernel messages. Please
[    0.000454] update your kernel commandline.
[    0.000473] Calibrating delay loop... 795.44 BogoMIPS (lpj=3977216)
[    0.089064] pid_max: default: 32768 minimum: 301
[    0.089193] Mount-cache hash table entries: 1024 (order: 0, 4096 bytes)
[    0.089205] Mountpoint-cache hash table entries: 1024 (order: 0, 4096 bytes)
[    0.089932] Initializing cgroup subsys io
[    0.089964] Initializing cgroup subsys memory
[    0.090005] Initializing cgroup subsys devices
[    0.090021] Initializing cgroup subsys freezer
[    0.090036] Initializing cgroup subsys perf_event
[    0.090048] Initializing cgroup subsys pids
[    0.090078] CPU: Testing write buffer coherency: ok
[    0.090499] Setting up static identity map for 0x80008200 - 0x80008258
[    0.092680] devtmpfs: initialized
[    0.105440] VFP support v0.3: implementor 41 architecture 3 part 30 variant c rev 3
[    0.120529] omap_hwmod: debugss: _wait_target_disable failed
[    0.175584] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns
[    0.179852] pinctrl core: initialized pinctrl subsystem
[    0.181216] NET: Registered protocol family 16
[    0.183420] DMA: preallocated 256 KiB pool for atomic coherent allocations
[    0.209061] cpuidle: using governor ladder
[    0.239048] cpuidle: using governor menu
[    0.243661] OMAP GPIO hardware version 0.1
[    0.254360] hw-breakpoint: debug architecture 0x4 unsupported.
[    0.297629] edma 49000000.edma: TI EDMA DMA engine driver
[    0.298606] reg-fixed-voltage fixedregulator@2: could not find pctldev for node /ocp/l4_wkup@44c00000/scm@210000/pinmux@800/pinmux_wl12xx_gpio, deferring probe
[    0.302364] omap_i2c 44e0b000.i2c: could not find pctldev for node /ocp/l4_wkup@44c00000/scm@210000/pinmux@800/pinmux_i2c0_pins, deferring probe
[    0.302525] media: Linux media interface: v0.10
[    0.302588] Linux video capture interface: v2.00
[    0.302638] pps_core: LinuxPPS API ver. 1 registered
[    0.302646] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti < <mailto:[email protected]> [email protected]>
[    0.302676] PTP clock support registered
[    0.302741] EDAC MC: Ver: 3.0.0
[    0.303966] omap-mailbox 480c8000.mailbox: omap mailbox rev 0x400
[    0.304332] Advanced Linux Sound Architecture Driver Initialized.
[    0.305512] clocksource: Switched to clocksource timer1
[    0.316775] NET: Registered protocol family 2
[    0.317599] TCP established hash table entries: 2048 (order: 1, 8192 bytes)
[    0.317636] TCP bind hash table entries: 2048 (order: 1, 8192 bytes)
[    0.317663] TCP: Hash tables configured (established 2048 bind 2048)
[    0.317748] UDP hash table entries: 256 (order: 0, 4096 bytes)
[    0.317767] UDP-Lite hash table entries: 256 (order: 0, 4096 bytes)
[    0.317925] NET: Registered protocol family 1
[    0.318352] RPC: Registered named UNIX socket transport module.
[    0.318366] RPC: Registered udp transport module.
[    0.318372] RPC: Registered tcp transport module.
[    0.318379] RPC: Registered tcp NFSv4.1 backchannel transport module.
[    0.319330] hw perfevents: enabled with armv7_cortex_a8 PMU driver, 5 counters available
[    0.321392] futex hash table entries: 256 (order: -1, 3072 bytes)
[    0.329780] squashfs: version 4.0 (2009/01/31) Phillip Lougher
[    0.330717] NFS: Registering the id_resolver key type
[    0.330798] Key type id_resolver registered
[    0.330807] Key type id_legacy registered
[    0.330886] ntfs: driver 2.1.32 [Flags: R/O].
[    0.334673] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 248)
[    0.334706] io scheduler noop registered
[    0.334719] io scheduler deadline registered
[    0.334877] io scheduler cfq registered (default)
[    0.336555] pinctrl-single 44e10800.pinmux: 142 pins at pa f9e10800 size 568
[    0.339415] backlight supply power not found, using dummy regulator
[    0.402480] Serial: 8250/16550 driver, 10 ports, IRQ sharing disabled
[    0.406962] 44e09000.serial: ttyS0 at MMIO 0x44e09000 (irq = 158, base_baud = 3000000) is a 8250
[    1.017357] console [ttyS0] enabled
[    1.022206] 48022000.serial: ttyS1 at MMIO 0x48022000 (irq = 159, base_baud = 3000000) is a 8250
[    1.032273] [drm] Initialized drm 1.1.0 20060810
[    1.039564] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
[    1.046349] [drm] No driver support for vblank timestamp query.
[    1.062121] Console: switching to colour frame buffer device 60x34
[    1.070360] tilcdc 4830e000.lcdc: fb0:  frame buffer device
[    1.105531] [drm] Initialized tilcdc 1.0.0 20121205 on minor 0
[    1.118644] loop: module loaded
[    1.124253] libphy: Fixed MDIO Bus: probed
[    1.185550] davinci_mdio 4a101000.mdio: davinci mdio revision 1.6
[    1.191695] davinci_mdio 4a101000.mdio: detected phy mask fffffffe
[    1.198786] libphy: 4a101000.mdio: probed
[    1.202886] davinci_mdio 4a101000.mdio: phy[0]: device 4a101000.mdio:00, driver SMSC LAN8710/LAN8720
[    1.212890] cpsw 4a100000.ethernet: Detected MACID = a0:f6:fd:4c:a6:ba
[    1.220531] cpsw 4a100000.ethernet: cpsw: Detected MACID = c4:ed:ba:88:2a:92
[    1.229382] mousedev: PS/2 mouse device common for all mice
[    1.235845] i2c /dev entries driver
[    1.240508] cpuidle: enable-method property 'ti,am3352' found operations
[    1.248197] omap_hsmmc 48060000.mmc: Got CD GPIO
[    1.275713] pinctrl-single 44e10800.pinmux: bad data for mux pinmux_mmc2_pins
[    1.282895] pinctrl-single 44e10800.pinmux: no pins entries for pinmux_mmc2_pins
[    1.317159] ledtrig-cpu: registered to indicate activity on CPUs
[    1.326069] NET: Registered protocol family 10
[    1.332092] sit: IPv6 over IPv4 tunneling driver
[    1.337715] NET: Registered protocol family 17
[    1.342510] Key type dns_resolver registered
[    1.347095] omap_voltage_late_init: Voltage driver support not added
[    1.407145] tps65910-rtc tps65910-rtc: rtc core: registered tps65910-rtc as rtc0
[    1.415278] omap_i2c 44e0b000.i2c: bus 0 rev0.11 at 400 kHz
[    1.421665] omap_hsmmc 48060000.mmc: Got CD GPIO
[    1.426813] vmmc: supplied by vbat
[    1.466341] pinctrl-single 44e10800.pinmux: bad data for mux pinmux_mmc2_pins
[    1.474737] pinctrl-single 44e10800.pinmux: no pins entries for pinmux_mmc2_pins
[    1.513247] mmc0: host does not support reading read-only switch, assuming write-enable
[    1.523414] mmc0: new high speed SDHC card at address 0001
[    1.529635] mmcblk0: mmc0:0001 AS 3.72 GiB
[    1.535996]  mmcblk0: p1 p2 p3
[    1.595932] vdd_mpu: supplied by vbat
[    1.602167] input: gpio_buttons@0 as /devices/platform/gpio_buttons@0/input/input0
[    1.618291] tps65910-rtc tps65910-rtc: setting system clock to 2019-02-01 20:07:49 UTC (1549051669)
[    1.639394] lis3_reg: disabling
[    1.655732] ALSA device list:
[    1.658720]   No soundcards found.
[    1.678290] EXT4-fs (mmcblk0p3): couldn't mount as ext3 due to feature incompatibilities
[    1.696920] EXT4-fs (mmcblk0p3): couldn't mount as ext2 due to feature incompatibilities
[    2.183999] EXT4-fs (mmcblk0p3): recovery complete
[    2.196864] EXT4-fs (mmcblk0p3): mounted filesystem with ordered data mode. Opts: (null)
[    2.205084] VFS: Mounted root (ext4 filesystem) on device 179:3.
[    2.225670] devtmpfs: mounted
[    2.235781] Freeing unused kernel memory: 260K (c08b1000 - c08f2000)
[    2.242162] This architecture does not have kernel memory protection.

INIT: version 2.88 booting

Starting udev

[    3.090091] udevd[78]: starting version 3.2.5
[    3.106175] random: udevd: uninitialized urandom read (16 bytes read, 26 bits of entropy available)
[    3.118667] random: udevd: uninitialized urandom read (16 bytes read, 26 bits of entropy available)
[    3.128014] random: udevd: uninitialized urandom read (16 bytes read, 26 bits of entropy available)
[    3.137335] random: udevd: uninitialized urandom read (16 bytes read, 26 bits of entropy available)
[    3.218433] udevd[79]: starting eudev-3.2.5
[    3.325886] random: udevd: uninitialized urandom read (16 bytes read, 29 bits of entropy available)
[    3.346155] random: udevd: uninitialized urandom read (16 bytes read, 29 bits of entropy available)
[    4.820708] EXT4-fs (mmcblk0p3): re-mounted. Opts: data=ordered
[    5.548283] random: dd: uninitialized urandom read (512 bytes read, 43 bits of entropy available)

INIT: Entering runlevel: 5

Configuring network interfaces... [ 5.820546] net eth0: initializing cpsw version 1.12 (0)

[    5.825987] net eth0: initialized cpsw ale version 1.4
[    5.831150] net eth0: ALE Table size 1024
[    5.838581] net eth0: phy found : id is : 0x7c0f1
[    5.851838] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
[    9.896392] cpsw 4a100000.ethernet eth0: Link is Up - 100Mbps/Full - flow control rx/tx
[    9.904635] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready

chown: unrecognized option '--reference=/etc/resolv.conf'

BusyBox v1.27.2 (2018-11-05 21:16:09 UTC) multi-call binary.

Usage: chown [-Rh]... USER[:[GRP]] FILE...

chmod: unrecognized option '--reference=/etc/resolv.conf'

BusyBox v1.27.2 (2018-11-05 21:16:09 UTC) multi-call binary.

Usage: chmod [-R] MODE[,MODE]... FILE...

done.

Starting system message bus: [ 14.887099] random: dbus-daemon: uninitialized urandom read (12 bytes read, 62 bits of entropy available)

[   14.912318] random: dbus-daemon: uninitialized urandom read (12 bytes read, 62 bits of entropy available)

dbus.

Starting OpenBSD Secure Shell server: sshd

[   15.393971] random: sshd: uninitialized urandom read (32 bytes read, 65 bits of entropy available)

done.

Starting Xserver

Starting DHCP server:

.

starting DNS forwarder and DHCP server: dnsmasq...

X.Org X Server 1.19.6

Release Date: 2017-12-20

X Protocol Version 11, Revision 0

Build Operating System: Linux 4.15.0-38-generic x86_64

Current Operating System: Linux polycaptil-machine-am335x-evmsk 4.4.19-ge581bb1cac #1 PREEMPT Thu May 24 11:42:17 CEST 2018 armv7l

Kernel command line: console=ttyO0,115200 root=/dev/mmcblk0p3 rw

Build Date: 05 November 2018 09:33:21PM

Current version of pixman: 0.34.0

Before reporting problems, check <http://wiki.x.org> http://wiki.x.org

to make sure that you have the latest version.

Markers: (--) probed, (**) from config file, (==) default setting,

(++) from command line, (!!) notice, (II) informational,

(WW) warning, (EE) error, (NI) not implemented, (??) unknown.

(==) Log file: "/var/log/Xorg.0.log", Time: Fri Feb 1 20:08:02 2019

(==) Using config file: "/etc/X11/xorg.conf"

(==) Using system config directory "/usr/share/X11/xorg.conf.d"

done.

Starting HOSTAP Daemon: Configuration file: /etc/hostapd.conf

nl80211: 'nl80211' generic netlink not found

Failed to initialize driver 'nl80211'

wlan0: interface state UNINITIALIZED->DISABLED

wlan0: AP-DISABLED

hostapd_free_hapd_data: Interface wlan0 wasn't started

Starting ntpd: done

Starting syslogd/klogd: done

Starting crond: OK

Poky (Yocto Project Reference Distro) 2.5
polycaptil-machine-am335x-evmsk /dev/ttyS0

polycaptil-machine-am335x-evmsk login: D-BUS per-session daemon address is:
unix:abstract=/tmp/dbus-07WuJSySeb,guid=a3e41f2692316c19766e95535c54a7 25

Size 1024x768 not found in available modes

Error: No calibratable devices found.

matchbox: Cant find a keycode for keysym 269025056

matchbox: ignoring key shortcut XF86Calendar=!$contacts

matchbox: Cant find a keycode for keysym 2809

matchbox: ignoring key shortcut telephone=!$dates

matchbox: Cant find a keycode for keysym 269025050

matchbox: ignoring key shortcut XF86Start=!matchbox-remote -desktop

dbus-daemon[358]: Activating service name='org.a11y.atspi.Registry' requested by ':1.0' (uid=0 pid=354 comm="matchbox-terminal ")

dbus-daemon[358]: Successfully activated service 'org.a11y.atspi.Registry'

SpiRegistry daemon is running with well-known name - org.a11y.atspi.Registry

[   30.662697] random: nonblocking pool is initialized

Poky (Yocto Project Reference Distro) 2.5
polycaptil-machine-am335x-evmsk /dev/ttyS0

Thank’s to take time to read my message.

N.Stanisavljevic

--
_______________________________________________
yocto mailing list
<mailto:[email protected]> [email protected]
<https://lists.yoctoproject.org/listinfo/yocto> https://lists.yoctoproject.org/listinfo/yocto

#11 lore raw

Hello Nikola,

I have here one non-important suggestion, for the starters:
Please, change kernel command line:

Quoted 1 line
[    0.000000] Kernel command line: console=ttyO0,115200

root=/dev/mmcblk0p2 rw

to: *console=ttyS0*,115200 root=/dev/mmcblk0p2 rw

According to:

Quoted 4 lines
[    0.000414] Console: colour dummy device 80x30
[    0.000440] WARNING: Your 'console=ttyO0' has been replaced by 'ttyS0'
[    0.000447] This ensures that you still see kernel messages. Please
[    0.000452] update your kernel commandline.

_______

Looking into:
(==) Log file: "/var/log/Xorg.0.log", Time: Thu Apr 11 15:41:31 2019 (==) Using config file: "/etc/X11/xorg.conf"
(==) Using system config directory "/usr/share/X11/xorg.conf.d"

Poky (Yocto Project Reference Distro) 2.6+snapshot am335x-evm /dev/ttyS0

am335x-evm login: The XKEYBOARD keymap compiler (xkbcomp) reports:

Quoted 3 lines

Warning: Unsupported high keycode 372 for name <I372> ignored
X11 cannot support keycodes above 255. This warning only shows for the first high keycode.

*> Internal error: Could not resolve keysym XF86MonBrightnessCycle*

Errors from xkbcomp are not fatal to the X server

[   15.951736] random: dbus-daemon: uninitialized urandom read (12 bytes

read, 67 bits of entropy available)
D-BUS per-session daemon address is:
unix:abstract=/tmp/dbus-AntF8uRBJQ,guid=2087fb970fdb264af1e4e5315caf602b *Size 1024x768 not found in available modes*
*Error: No calibratable devices found.*
*matchbox: Cant find a keycode for keysym 269025056*
matchbox: ignoring key shortcut XF86Calendar=!$contacts *matchbox: Cant find a keycode for keysym 2809*
matchbox: ignoring key shortcut telephone=!$dates
*matchbox: Cant find a keycode for keysym 269025050*
matchbox: ignoring key shortcut XF86Start=!matchbox-remote -desktop
_______

Seems, that mode you have chosen somehow with your touch screen driver is NOT supported (messages in *RED*).

Please, could you choose something supported (800x600) and see if this will work for you (just as proof of concept/ad-hoc test)?

Maybe your driver does not support 1024x768 mode (could be!)? *And, YES, calibration mode NOT to be performed could be FATAL!*
_______

For now, it is enough suggestions for exploring and trying by you.

You should have attached to your @ log Xorg.0.log message again, for us to inspect the messages and try to determine where the failure is.

Zoran
_______

Quoted 2,324 lines · Stanisavljevic

Hello Zoran,

I tried to change X.org X Server version

To do this I used yocto warrior version.

When I boot the system, it’s written that x.org X Server version is to 1.20.4

But I have the same problem as before, the touchscreen is completely locked and don’t react when I touch the screen.

Do you have an other idea where the problem is coming ?

Here I copy the boot log :

U-Boot SPL 2017.05-00001-g041a398 (May 02 2018 - 18:36:57)

Trying to boot from MMC1

reading uboot.env

reading u-boot.img

reading u-boot.img

reading u-boot.img

reading u-boot.img

U-Boot 2017.05-00001-g041a398 (May 02 2018 - 18:36:57 +0200)

CPU : AM335X-GP rev 2.1

Model: TI AM335x EVM-SK

DRAM: 256 MiB

NAND: 0 MiB

MMC: OMAP SD/MMC: 0, OMAP SD/MMC: 1

reading uboot.env

ERROR: No USB device found

at drivers/usb/gadget/ether.c:2709/usb_ether_init()

Net: CACHE: Misaligned operation at range [8df323c0, 8df32464]

Warning: ethernet@4a100000 using MAC address from ROM

eth0: ethernet@4a100000

Hit any key to stop autoboot: 0

reading zImage

3412752 bytes read in 251 ms (13 MiB/s)

reading dtb

39733 bytes read in 12 ms (3.2 MiB/s)

## Flattened Device Tree blob at 82000000

Booting using the fdt blob at 0x82000000

Loading Device Tree to 8df19000, end 8df25b34 ... OK

Starting kernel ...

[    0.000000] Booting Linux on physical CPU 0x0
[    0.000000] Initializing cgroup subsys cpu
[    0.000000] Initializing cgroup subsys cpuacct
[    0.000000] Linux version 4.4.19-ge581bb1cac
(polycaptil@polycaptil-HP-Notebo
                     ok) (gcc version 5.3.0 (GCC) ) #1 PREEMPT Thu May 24

11:42:17 CEST 2018

[    0.000000] CPU: ARMv7 Processor [413fc082] revision 2 (ARMv7),

cr=10c5387d

[    0.000000] CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing

instructio n cache

[    0.000000] Machine model: TI AM335x EVM-SK
[    0.000000] cma: Reserved 48 MiB at 0x8a800000
[    0.000000] Memory policy: Data cache writeback
[    0.000000] CPU: All CPU(s) started in SVC mode.
[    0.000000] AM335X ES2.1 (sgx neon )
[    0.000000] Built 1 zonelists in Zone order, mobility grouping on.

Total pag es: 64960

[    0.000000] Kernel command line: console=ttyO0,115200

root=/dev/mmcblk0p2 rw

[    0.000000] PID hash table entries: 1024 (order: 0, 4096 bytes)
[    0.000000] Dentry cache hash table entries: 32768 (order: 5, 131072

bytes)

[    0.000000] Inode-cache hash table entries: 16384 (order: 4, 65536

bytes)

[    0.000000] Memory: 200444K/262144K available (6495K kernel code, 313K

rwdata , 2368K rodata,
260K init, 265K bss, 12548K reserved, 49152K cma-reserved, 0K
hi ghmem)

[    0.000000] Virtual kernel memory layout:
[    0.000000]     vector  : 0xffff0000 - 0xffff1000   (   4 kB)
[    0.000000]     fixmap  : 0xffc00000 - 0xfff00000   (3072 kB)
[    0.000000]     vmalloc : 0xd0800000 - 0xff800000   ( 752 MB)
[    0.000000]     lowmem  : 0xc0000000 - 0xd0000000   ( 256 MB)
[    0.000000]     pkmap   : 0xbfe00000 - 0xc0000000   (   2 MB)
[    0.000000]     modules : 0xbf000000 - 0xbfe00000   (  14 MB)
[    0.000000]       .text : 0xc0008000 - 0xc08b0034   (8865 kB)
[    0.000000]       .init : 0xc08b1000 - 0xc08f2000   ( 260 kB)
[    0.000000]       .data : 0xc08f2000 - 0xc09407f0   ( 314 kB)
[    0.000000]        .bss : 0xc09407f0 - 0xc0982d58   ( 266 kB)
[    0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=1, Nodes=1
[    0.000000] Preemptible hierarchical RCU implementation.
[    0.000000]  Build-time adjustment of leaf fanout to 32.
[    0.000000] NR_IRQS:16 nr_irqs:16 16
[    0.000000] IRQ: Found an INTC at 0xfa200000 (revision 5.0) with 128

interrup ts

[    0.000000] OMAP clockevent source: timer2 at 24000000 Hz
[    0.000013] sched_clock: 32 bits at 24MHz, resolution 41ns, wraps every

89478 484971ns

[    0.000034] clocksource: timer1: mask: 0xffffffff max_cycles:

0xffffffff, max
_idle_ns: 79635851949 ns

[    0.000046] OMAP clocksource: timer1 at 24000000 Hz
[    0.000221] clocksource_probe: no matching clocksources found
[    0.000414] Console: colour dummy device 80x30
[    0.000440] WARNING: Your 'console=ttyO0' has been replaced by 'ttyS0'
[    0.000447] This ensures that you still see kernel messages. Please
[    0.000452] update your kernel commandline.
[    0.000471] Calibrating delay loop... 795.44 BogoMIPS (lpj=3977216)
[    0.089060] pid_max: default: 32768 minimum: 301
[    0.089190] Mount-cache hash table entries: 1024 (order: 0, 4096 bytes)
[    0.089201] Mountpoint-cache hash table entries: 1024 (order: 0, 4096

bytes)

[    0.089924] Initializing cgroup subsys io
[    0.089956] Initializing cgroup subsys memory
[    0.089996] Initializing cgroup subsys devices
[    0.090011] Initializing cgroup subsys freezer
[    0.090026] Initializing cgroup subsys perf_event
[    0.090038] Initializing cgroup subsys pids
[    0.090068] CPU: Testing write buffer coherency: ok
[    0.090493] Setting up static identity map for 0x80008200 - 0x80008258
[    0.092679] devtmpfs: initialized
[    0.105439] VFP support v0.3: implementor 41 architecture 3 part 30

variant c rev 3

[    0.120521] omap_hwmod: debugss: _wait_target_disable failed
[    0.175644] clocksource: jiffies: mask: 0xffffffff max_cycles:

0xffffffff, ma
x_idle_ns: 19112604462750000 ns

[    0.179890] pinctrl core: initialized pinctrl subsystem
[    0.181243] NET: Registered protocol family 16
[    0.183450] DMA: preallocated 256 KiB pool for atomic coherent

allocations

[    0.209057] cpuidle: using governor ladder
[    0.239046] cpuidle: using governor menu
[    0.243690] OMAP GPIO hardware version 0.1
[    0.254398] hw-breakpoint: debug architecture 0x4 unsupported.
[    0.297651] edma 49000000.edma: TI EDMA DMA engine driver
[    0.298633] reg-fixed-voltage fixedregulator@2: could not find pctldev

for no de
/ocp/l4_wkup@44c00000/scm@210000/pinmux@800/pinmux_wl12xx_gpio, deferring
pro be

[    0.302387] omap_i2c 44e0b000.i2c: could not find pctldev for node

/ocp/l4_wk up@44c00000
/scm@210000/pinmux@800/pinmux_i2c0_pins, deferring probe

[    0.302542] media: Linux media interface: v0.10
[    0.302605] Linux video capture interface: v2.00
[    0.302656] pps_core: LinuxPPS API ver. 1 registered
[    0.302664] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo

Giome tti <
[email protected]>

[    0.302694] PTP clock support registered
[    0.302758] EDAC MC: Ver: 3.0.0
[    0.303971] omap-mailbox 480c8000.mailbox: omap mailbox rev 0x400
[    0.304334] Advanced Linux Sound Architecture Driver Initialized.
[    0.305513] clocksource: Switched to clocksource timer1
[    0.316808] NET: Registered protocol family 2
[    0.317626] TCP established hash table entries: 2048 (order: 1, 8192

bytes)

[    0.317665] TCP bind hash table entries: 2048 (order: 1, 8192 bytes)
[    0.317693] TCP: Hash tables configured (established 2048 bind 2048)
[    0.317782] UDP hash table entries: 256 (order: 0, 4096 bytes)
[    0.317803] UDP-Lite hash table entries: 256 (order: 0, 4096 bytes)
[    0.317960] NET: Registered protocol family 1
[    0.318387] RPC: Registered named UNIX socket transport module.
[    0.318402] RPC: Registered udp transport module.
[    0.318409] RPC: Registered tcp transport module.
[    0.318415] RPC: Registered tcp NFSv4.1 backchannel transport module.
[    0.319367] hw perfevents: enabled with armv7_cortex_a8 PMU driver, 5

counter s available

[    0.321439] futex hash table entries: 256 (order: -1, 3072 bytes)
[    0.329858] squashfs: version 4.0 (2009/01/31) Phillip Lougher
[    0.330796] NFS: Registering the id_resolver key type
[    0.330874] Key type id_resolver registered
[    0.330882] Key type id_legacy registered
[    0.330960] ntfs: driver 2.1.32 [Flags: R/O].
[    0.334733] Block layer SCSI generic (bsg) driver version 0.4 loaded

(major 2 48)

[    0.334764] io scheduler noop registered
[    0.334778] io scheduler deadline registered
[    0.334936] io scheduler cfq registered (default)
[    0.336607] pinctrl-single 44e10800.pinmux: 142 pins at pa f9e10800

size 568

[    0.339467] backlight supply power not found, using dummy regulator
[    0.402551] Serial: 8250/16550 driver, 10 ports, IRQ sharing disabled
[    0.407008] 44e09000.serial: ttyS0 at MMIO 0x44e09000 (irq = 158,

base_baud = 3000000)
is a 8250

[    1.017402] console [ttyS0] enabled
[    1.022241] 48022000.serial: ttyS1 at MMIO 0x48022000 (irq = 159,

base_baud = 3000000)
is a 8250

[    1.032291] [drm] Initialized drm 1.1.0 20060810
[    1.039603] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
[    1.046388] [drm] No driver support for vblank timestamp query.
[    1.062150] Console: switching to colour frame buffer device 60x34
[    1.070379] tilcdc 4830e000.lcdc: fb0:  frame buffer device
[    1.105534] [drm] Initialized tilcdc 1.0.0 20121205 on minor 0
[    1.118627] loop: module loaded
[    1.124254] libphy: Fixed MDIO Bus: probed
[    1.185548] davinci_mdio 4a101000.mdio: davinci mdio revision 1.6
[    1.191692] davinci_mdio 4a101000.mdio: detected phy mask fffffffe
[    1.198739] libphy: 4a101000.mdio: probed
[    1.202836] davinci_mdio 4a101000.mdio: phy[0]: device

4a101000.mdio:00, driv
er SMSC LAN8710/LAN8720

[    1.212833] cpsw 4a100000.ethernet: Detected MACID = a0:f6:fd:4c:a6:ba
[    1.220460] cpsw 4a100000.ethernet: cpsw: Detected MACID =

c4:ed:ba:88:2a:92

[    1.229323] mousedev: PS/2 mouse device common for all mice
[    1.235803] i2c /dev entries driver
[    1.240462] cpuidle: enable-method property 'ti,am3352' found operations
[    1.248156] omap_hsmmc 48060000.mmc: Got CD GPIO
[    1.275714] pinctrl-single 44e10800.pinmux: bad data for mux

pinmux_mmc2_pins

[    1.282895] pinctrl-single 44e10800.pinmux: no pins entries for

pinmux_mmc2_p ins

[    1.317169] ledtrig-cpu: registered to indicate activity on CPUs
[    1.326062] NET: Registered protocol family 10
[    1.332076] sit: IPv6 over IPv4 tunneling driver
[    1.337708] NET: Registered protocol family 17
[    1.342503] Key type dns_resolver registered
[    1.347084] omap_voltage_late_init: Voltage driver support not added
[    1.407266] tps65910-rtc tps65910-rtc: rtc core: registered

tps65910-rtc as r tc0

[    1.415401] omap_i2c 44e0b000.i2c: bus 0 rev0.11 at 400 kHz
[    1.421798] omap_hsmmc 48060000.mmc: Got CD GPIO
[    1.426953] vmmc: supplied by vbat
[    1.466351] pinctrl-single 44e10800.pinmux: bad data for mux

pinmux_mmc2_pins

[    1.474750] pinctrl-single 44e10800.pinmux: no pins entries for

pinmux_mmc2_p ins

[    1.513248] mmc0: host does not support reading read-only switch,

assuming wr ite-enable

[    1.523416] mmc0: new high speed SDHC card at address 0001
[    1.529625] mmcblk0: mmc0:0001 AS 3.72 GiB
[    1.535990]  mmcblk0: p1 p2 p3
[    1.595934] vdd_mpu: supplied by vbat
[    1.602181] input: gpio_buttons@0 as /devices/platform/gpio_buttons@0/input/i
                    nput0
[    1.618321] tps65910-rtc tps65910-rtc: setting system clock to

2019-04-11 15: 41:17
UTC (1554997277)

[    1.639403] lis3_reg: disabling
[    1.655736] ALSA device list:
[    1.658725]   No soundcards found.
[    1.678270] EXT4-fs (mmcblk0p2): couldn't mount as ext3 due to feature

incomp atibilities

[    1.696893] EXT4-fs (mmcblk0p2): couldn't mount as ext2 due to feature

incomp atibilities

[    1.918459] EXT4-fs (mmcblk0p2): recovery complete
[    1.926817] EXT4-fs (mmcblk0p2): mounted filesystem with ordered data

mode. O pts: (null)

[    1.945553] VFS: Mounted root (ext4 filesystem) on device 179:2.
[    1.951741] devtmpfs: mounted
[    1.955142] Freeing unused kernel memory: 260K (c08b1000 - c08f2000)
[    1.975513] This architecture does not have kernel memory protection.

INIT: version 2.88 booting

Starting udev

[    2.626491] udevd[78]: starting version 3.2.7
[    2.632958] random: udevd: uninitialized urandom read (16 bytes read,

19 bits of entropy
available)

[    2.655617] random: udevd: uninitialized urandom read (16 bytes read,

19 bits of entropy
available)

[    2.675821] random: udevd: uninitialized urandom read (16 bytes read,

20 bits of entropy
available)

[    2.685085] random: udevd: uninitialized urandom read (16 bytes read,

20 bits of entropy
available)

[    2.730297] udevd[78]: specified group 'kvm' unknown
[    2.798310] udevd[79]: starting eudev-3.2.7
[    3.062517] random: udevd: uninitialized urandom read (16 bytes read,

23 bits of entropy
available)

[    3.095948] random: udevd: uninitialized urandom read (16 bytes read,

23 bits of entropy
available)

[    3.128747] udevd[79]: specified group 'kvm' unknown
[    4.544886] EXT4-fs (mmcblk0p2): re-mounted. Opts: data=ordered
[    5.086681] random: dd: uninitialized urandom read (512 bytes read, 36

bits o f entropy
available)

INIT: Entering runlevel: 5

Configuring network interfaces... [ 5.281526] net eth0: initializing
cpsw ver sion 1.12 (0)

[    5.286963] net eth0: initialized cpsw ale version 1.4
[    5.292126] net eth0: ALE Table size 1024
[    5.299577] net eth0: phy found : id is : 0x7c0f1
[    5.312916] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready

udhcpc: started, v1.30.1

udhcpc: sending discover

udhcpc: sending discover

udhcpc: sending discover

udhcpc: no lease, forking to background

done.

Starting system message bus: [ 14.818015] random: dbus-daemon:
uninitialized urandom read (12 bytes read, 53 bits of entropy available)

[   14.841904] random: dbus-daemon: uninitialized urandom read (12 bytes

read, 53 bits of entropy available)

dbus.

Starting Xserver

Starting syslogd/klogd:

done

X.Org X Server 1.20.4

X Protocol Version 11, Revision 0

Build Operating System: Linux 4.15.0-45-generic x86_64

Current Operating System: Linux am335x-evm 4.4.19-ge581bb1cac #1 PREEMPT Thu May 24 11:42:17 CEST 2018 armv7l

Kernel command line: console=ttyO0,115200 root=/dev/mmcblk0p2 rw

Build Date: 10 April 2019 08:15:46PM

Current version of pixman: 0.38.0

Before reporting problems, check http://wiki.x.org

to make sure that you have the latest version.

Markers: (--) probed, (**) from config file, (==) default setting,

(++) from command line, (!!) notice, (II) informational,

(WW) warning, (EE) error, (NI) not implemented, (??) unknown.

(==) Log file: "/var/log/Xorg.0.log", Time: Thu Apr 11 15:41:31 2019

(==) Using config file: "/etc/X11/xorg.conf"

(==) Using system config directory "/usr/share/X11/xorg.conf.d"

Poky (Yocto Project Reference Distro) 2.6+snapshot am335x-evm /dev/ttyS0

am335x-evm login: The XKEYBOARD keymap compiler (xkbcomp) reports:

Quoted 7 lines

Warning: Unsupported high keycode 372 for name <I372> ignored

X11 cannot support keycodes above 255.

This warning only shows for the first high keycode.

Internal error:   Could not resolve keysym XF86MonBrightnessCycle

Errors from xkbcomp are not fatal to the X server

[   15.951736] random: dbus-daemon: uninitialized urandom read (12 bytes

read, 67 bits of entropy available)

D-BUS per-session daemon address is:
unix:abstract=/tmp/dbus-AntF8uRBJQ,guid=2087fb970fdb264af1e4e5315caf602b

Size 1024x768 not found in available modes

Error: No calibratable devices found.

matchbox: Cant find a keycode for keysym 269025056

matchbox: ignoring key shortcut XF86Calendar=!$contacts

matchbox: Cant find a keycode for keysym 2809

matchbox: ignoring key shortcut telephone=!$dates

matchbox: Cant find a keycode for keysym 269025050

matchbox: ignoring key shortcut XF86Start=!matchbox-remote -desktop

dbus-daemon[282]: Activating service name='org.a11y.atspi.Registry' requested by ':1.0' (uid=0 pid=278 comm="matchbox-terminal ")

dbus-daemon[282]: Successfully activated service 'org.a11y.atspi.Registry'

SpiRegistry daemon is running with well-known name - org.a11y.atspi.Registry

[   41.825592] random: nonblocking pool is initialized

Nikola.

*De :* Zoran Stojsavljevic <[email protected]> *Envoyé :* lundi 8 avril 2019 08:07
*À :* Stanisavljevic <[email protected]> *Cc :* Yocto Project <[email protected]>; Marc Ferland < [email protected]>
*Objet :* Re: [yocto] yocto touchscreen

Hello Nikola,

I did some quick analysis of your kernel boot traces, and there are the following observations made:

[1] The kernel used is:
Linux version 4.4.19-ge581bb1cac (polycaptil@polycaptil-HP-Notebook) ?!

In my case (I built YOCTO thud for BBB NOT using X11, only serial console):
Linux version 4.19.7-jumpnow (oe-user@oe-host) (gcc version 8.2.0 (GCC))

I could not explain polycaptil@polycaptil-HP-Notebook, maybe you do it for such kind of platform...
The kernel used is too old, for my taste, you did not replaced it, if you built YOCTO thud!

[2] The kernel command line:

[    0.000000] Kernel command line: console=ttyO0,115200

root=/dev/mmcblk0p2 rw

Shows that you use EMMC as holder for / tree, all good.

[3] The concern about your console: console=ttyO0,115200 Is addressed here:

[    0.000441] WARNING: Your 'console=ttyO0' has been replaced by 'ttyS0'

Later followed by:

[    0.402495] Serial: 8250/16550 driver, 10 ports, IRQ sharing disabled
[    0.406968] 44e09000.serial: ttyS0 at MMIO 0x44e09000 (irq = 158,
base_baud = 3000000) is a 8250
[    1.017361] console [ttyS0] enabled
[    1.022188] 48022000.serial: ttyS1 at MMIO 0x48022000 (irq = 159,

base_baud = 3000000) is a 8250

So, not at all worries about the console!

[4] The following traces are worrying me very much:

Starting Xserver
Starting syslogd/klogd:
done
*X.Org X Server 1.20.1*
X Protocol Version 11, Revision 0
Build Operating System: Linux 4.15.0-45-generic x86_64 *Current Operating System: Linux am335x-evm 4.4.19-ge581bb1cac* #1 PREEMPT Thu May 24 11:42:17 CEST 2018 armv7l
Kernel command line: console=ttyO0,115200 root=/dev/mmcblk0p2 rw Build Date: 02 April 2019 07:35:10PM

As Marc wrote earlier:

Quoted 1 line

Looks like: https://bugzilla.redhat.com/show_bug.cgi?id=1650634

So, as I stated before: you should have in your build:

*X.Org Server 1.20.3! This is the main problem, seems!*

Zoran

_______

On Fri, Apr 5, 2019 at 3:35 PM Stanisavljevic <
[email protected]> wrote:

Hello Zoran,

I keep you in touch about the migration from sumo to thud to solve my problem of locked touchscreen.

I migrated from sumo to thud version, but nothing changed, the problem is the same, and I have same messages on boot as sumo version.

I looked that the x server have a configuration kernel command line (if I correctly understood), here is what is written :

Kernel command line: console=ttyO0,115200 root=/dev/mmcblk0p2 rw

But the kernel command line of poky is different, here is what is configured for poky kernel command line :

Poky (Yocto Project Reference Distro) 2.6.1 am335x-evm /dev/ttyS0

For the xserver it is ttyO0 and for poky it is ttyS0, maybe there is something wrong here which do problem for the touchscreen.

I put below (at end of this mail )the text which appear during the boot.

I think xorg-x11-server package 1.20.3 was not the problem in the previous yocto version (sumo)…

Best regards

Nikola

Here is the text that appear during the boot :

root@am335x-evm:~# CCCCCCCCCCCCCCCCCCCCCCCC

U-Boot SPL 2017.05-00001-g041a398 (May 02 2018 - 18:36:57)

Trying to boot from MMC1

reading uboot.env

reading u-boot.img

reading u-boot.img

reading u-boot.img

reading u-boot.img

U-Boot 2017.05-00001-g041a398 (May 02 2018 - 18:36:57 +0200)

CPU : AM335X-GP rev 2.1

Model: TI AM335x EVM-SK

DRAM: 256 MiB

NAND: 0 MiB

MMC: OMAP SD/MMC: 0, OMAP SD/MMC: 1

reading uboot.env

ERROR: No USB device found

at drivers/usb/gadget/ether.c:2709/usb_ether_init()

Net: CACHE: Misaligned operation at range [8df323c0, 8df32464]

Warning: ethernet@4a100000 using MAC address from ROM

eth0: ethernet@4a100000

Hit any key to stop autoboot: 0

reading zImage

3412752 bytes read in 252 ms (12.9 MiB/s)

reading dtb

39733 bytes read in 12 ms (3.2 MiB/s)

## Flattened Device Tree blob at 82000000

Booting using the fdt blob at 0x82000000

Loading Device Tree to 8df19000, end 8df25b34 ... OK

Starting kernel ...

[    0.000000] Booting Linux on physical CPU 0x0
[    0.000000] Initializing cgroup subsys cpu
[    0.000000] Initializing cgroup subsys cpuacct
[    0.000000] Linux version 4.4.19-ge581bb1cac

(polycaptil@polycaptil-HP-Notebook) (gcc version 5.3.0 (GCC) ) #1 PREEMPT Thu May 24 11:42:17 CEST 2018

[    0.000000] CPU: ARMv7 Processor [413fc082] revision 2 (ARMv7),

cr=10c5387d

[    0.000000] CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing

instruction cache

[    0.000000] Machine model: TI AM335x EVM-SK
[    0.000000] cma: Reserved 48 MiB at 0x8a800000
[    0.000000] Memory policy: Data cache writeback
[    0.000000] CPU: All CPU(s) started in SVC mode.
[    0.000000] AM335X ES2.1 (sgx neon )
[    0.000000] Built 1 zonelists in Zone order, mobility grouping on.

Total pages: 64960

[    0.000000] Kernel command line: console=ttyO0,115200

root=/dev/mmcblk0p2 rw

[    0.000000] PID hash table entries: 1024 (order: 0, 4096 bytes)
[    0.000000] Dentry cache hash table entries: 32768 (order: 5, 131072

bytes)

[    0.000000] Inode-cache hash table entries: 16384 (order: 4, 65536

bytes)

[    0.000000] Memory: 200444K/262144K available (6495K kernel code, 313K

rwdata, 2368K rodata, 260K init, 265K bss, 12548K reserved, 49152K cma-reserved, 0K highmem)

[    0.000000] Virtual kernel memory layout:
[    0.000000]     vector  : 0xffff0000 - 0xffff1000   (   4 kB)
[    0.000000]     fixmap  : 0xffc00000 - 0xfff00000   (3072 kB)
[    0.000000]     vmalloc : 0xd0800000 - 0xff800000   ( 752 MB)
[    0.000000]     lowmem  : 0xc0000000 - 0xd0000000   ( 256 MB)
[    0.000000]     pkmap   : 0xbfe00000 - 0xc0000000   (   2 MB)
[    0.000000]     modules : 0xbf000000 - 0xbfe00000   (  14 MB)
[    0.000000]       .text : 0xc0008000 - 0xc08b0034   (8865 kB)
[    0.000000]       .init : 0xc08b1000 - 0xc08f2000   ( 260 kB)
[    0.000000]       .data : 0xc08f2000 - 0xc09407f0   ( 314 kB)
[    0.000000]        .bss : 0xc09407f0 - 0xc0982d58   ( 266 kB)
[    0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=1, Nodes=1
[    0.000000] Preemptible hierarchical RCU implementation.
[    0.000000]  Build-time adjustment of leaf fanout to 32.
[    0.000000] NR_IRQS:16 nr_irqs:16 16
[    0.000000] IRQ: Found an INTC at 0xfa200000 (revision 5.0) with 128

interrupts

[    0.000000] OMAP clockevent source: timer2 at 24000000 Hz
[    0.000016] sched_clock: 32 bits at 24MHz, resolution 41ns, wraps every

89478484971ns

[    0.000036] clocksource: timer1: mask: 0xffffffff max_cycles:

0xffffffff, max_idle_ns: 79635851949 ns

[    0.000047] OMAP clocksource: timer1 at 24000000 Hz
[    0.000222] clocksource_probe: no matching clocksources found
[    0.000415] Console: colour dummy device 80x30
[    0.000441] WARNING: Your 'console=ttyO0' has been replaced by 'ttyS0'
[    0.000447] This ensures that you still see kernel messages. Please
[    0.000453] update your kernel commandline.
[    0.000473] Calibrating delay loop... 795.44 BogoMIPS (lpj=3977216)
[    0.089067] pid_max: default: 32768 minimum: 301
[    0.089198] Mount-cache hash table entries: 1024 (order: 0, 4096 bytes)
[    0.089210] Mountpoint-cache hash table entries: 1024 (order: 0, 4096

bytes)

[    0.089932] Initializing cgroup subsys io
[    0.089965] Initializing cgroup subsys memory
[    0.090003] Initializing cgroup subsys devices
[    0.090020] Initializing cgroup subsys freezer
[    0.090035] Initializing cgroup subsys perf_event
[    0.090047] Initializing cgroup subsys pids
[    0.090074] CPU: Testing write buffer coherency: ok
[    0.090499] Setting up static identity map for 0x80008200 - 0x80008258
[    0.092669] devtmpfs: initialized
[    0.105440] VFP support v0.3: implementor 41 architecture 3 part 30

variant c rev 3

[    0.120496] omap_hwmod: debugss: _wait_target_disable failed
[    0.175552] clocksource: jiffies: mask: 0xffffffff max_cycles:

0xffffffff, max_idle_ns: 19112604462750000 ns

[    0.179889] pinctrl core: initialized pinctrl subsystem
[    0.181246] NET: Registered protocol family 16
[    0.183446] DMA: preallocated 256 KiB pool for atomic coherent

allocations

[    0.209067] cpuidle: using governor ladder
[    0.239055] cpuidle: using governor menu
[    0.243662] OMAP GPIO hardware version 0.1
[    0.254349] hw-breakpoint: debug architecture 0x4 unsupported.
[    0.297650] edma 49000000.edma: TI EDMA DMA engine driver
[    0.298630] reg-fixed-voltage fixedregulator@2: could not find pctldev

for node /ocp/l4_wkup@44c00000/scm@210000/pinmux@800/pinmux_wl12xx_gpio, deferring probe

[    0.302384] omap_i2c 44e0b000.i2c: could not find pctldev for node

/ocp/l4_wkup@44c00000/scm@210000/pinmux@800/pinmux_i2c0_pins, deferring probe

[    0.302543] media: Linux media interface: v0.10
[    0.302609] Linux video capture interface: v2.00
[    0.302660] pps_core: LinuxPPS API ver. 1 registered
[    0.302668] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo

Giometti <[email protected]>

[    0.302699] PTP clock support registered
[    0.302764] EDAC MC: Ver: 3.0.0
[    0.303981] omap-mailbox 480c8000.mailbox: omap mailbox rev 0x400
[    0.304343] Advanced Linux Sound Architecture Driver Initialized.
[    0.305508] clocksource: Switched to clocksource timer1
[    0.316757] NET: Registered protocol family 2
[    0.317569] TCP established hash table entries: 2048 (order: 1, 8192

bytes)

[    0.317608] TCP bind hash table entries: 2048 (order: 1, 8192 bytes)
[    0.317636] TCP: Hash tables configured (established 2048 bind 2048)
[    0.317718] UDP hash table entries: 256 (order: 0, 4096 bytes)
[    0.317738] UDP-Lite hash table entries: 256 (order: 0, 4096 bytes)
[    0.317898] NET: Registered protocol family 1
[    0.318323] RPC: Registered named UNIX socket transport module.
[    0.318337] RPC: Registered udp transport module.
[    0.318344] RPC: Registered tcp transport module.
[    0.318350] RPC: Registered tcp NFSv4.1 backchannel transport module.
[    0.319303] hw perfevents: enabled with armv7_cortex_a8 PMU driver, 5

counters available

[    0.321370] futex hash table entries: 256 (order: -1, 3072 bytes)
[    0.329774] squashfs: version 4.0 (2009/01/31) Phillip Lougher
[    0.330714] NFS: Registering the id_resolver key type
[    0.330792] Key type id_resolver registered
[    0.330801] Key type id_legacy registered
[    0.330881] ntfs: driver 2.1.32 [Flags: R/O].
[    0.334651] Block layer SCSI generic (bsg) driver version 0.4 loaded

(major 248)

[    0.334684] io scheduler noop registered
[    0.334698] io scheduler deadline registered
[    0.334855] io scheduler cfq registered (default)
[    0.336527] pinctrl-single 44e10800.pinmux: 142 pins at pa f9e10800

size 568

[    0.339377] backlight supply power not found, using dummy regulator
[    0.402495] Serial: 8250/16550 driver, 10 ports, IRQ sharing disabled
[    0.406968] 44e09000.serial: ttyS0 at MMIO 0x44e09000 (irq = 158,

base_baud = 3000000) is a 8250

[    1.017361] console [ttyS0] enabled
[    1.022188] 48022000.serial: ttyS1 at MMIO 0x48022000 (irq = 159,

base_baud = 3000000) is a 8250

[    1.032233] [drm] Initialized drm 1.1.0 20060810
[    1.039551] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
[    1.046337] [drm] No driver support for vblank timestamp query.
[    1.062083] Console: switching to colour frame buffer device 60x34
[    1.070316] tilcdc 4830e000.lcdc: fb0:  frame buffer device
[    1.105532] [drm] Initialized tilcdc 1.0.0 20121205 on minor 0
[    1.118602] loop: module loaded
[    1.124221] libphy: Fixed MDIO Bus: probed
[    1.185547] davinci_mdio 4a101000.mdio: davinci mdio revision 1.6
[    1.191690] davinci_mdio 4a101000.mdio: detected phy mask fffffffe
[    1.198754] libphy: 4a101000.mdio: probed
[    1.202851] davinci_mdio 4a101000.mdio: phy[0]: device

4a101000.mdio:00, driver SMSC LAN8710/LAN8720

[    1.212830] cpsw 4a100000.ethernet: Detected MACID = a0:f6:fd:4c:a6:ba
[    1.220461] cpsw 4a100000.ethernet: cpsw: Detected MACID =

c4:ed:ba:88:2a:92

[    1.229313] mousedev: PS/2 mouse device common for all mice
[    1.235792] i2c /dev entries driver
[    1.240448] cpuidle: enable-method property 'ti,am3352' found operations
[    1.248143] omap_hsmmc 48060000.mmc: Got CD GPIO
[    1.275713] pinctrl-single 44e10800.pinmux: bad data for mux

pinmux_mmc2_pins

[    1.282895] pinctrl-single 44e10800.pinmux: no pins entries for

pinmux_mmc2_pins

[    1.317167] ledtrig-cpu: registered to indicate activity on CPUs
[    1.326065] NET: Registered protocol family 10
[    1.332086] sit: IPv6 over IPv4 tunneling driver
[    1.337713] NET: Registered protocol family 17
[    1.342528] Key type dns_resolver registered
[    1.347114] omap_voltage_late_init: Voltage driver support not added
[    1.407191] tps65910-rtc tps65910-rtc: rtc core: registered

tps65910-rtc as rtc0

[    1.415327] omap_i2c 44e0b000.i2c: bus 0 rev0.11 at 400 kHz
[    1.421710] omap_hsmmc 48060000.mmc: Got CD GPIO
[    1.426857] vmmc: supplied by vbat
[    1.466348] pinctrl-single 44e10800.pinmux: bad data for mux

pinmux_mmc2_pins

[    1.474748] pinctrl-single 44e10800.pinmux: no pins entries for

pinmux_mmc2_pins

[    1.513242] mmc0: host does not support reading read-only switch,

assuming write-enable

[    1.523406] mmc0: new high speed SDHC card at address 0001
[    1.529619] mmcblk0: mmc0:0001 AS 3.72 GiB
[    1.535970]  mmcblk0: p1 p2 p3
[    1.595927] vdd_mpu: supplied by vbat
[    1.602118] input: gpio_buttons@0 as /devices/platform/gpio_buttons@0

/input/input0

[    1.618310] tps65910-rtc tps65910-rtc: setting system clock to
2019-04-03 08:25:12 UTC (1554279912)
[    1.639397] lis3_reg: disabling
[    1.655734] ALSA device list:
[    1.658723]   No soundcards found.
[    1.678283] EXT4-fs (mmcblk0p2): couldn't mount as ext3 due to feature

incompatibilities

[    1.696903] EXT4-fs (mmcblk0p2): couldn't mount as ext2 due to feature

incompatibilities

[    1.792693] EXT4-fs (mmcblk0p2): recovery complete
[    1.807446] EXT4-fs (mmcblk0p2): mounted filesystem with ordered data

mode. Opts: (null)

[    1.821463] VFS: Mounted root (ext4 filesystem) on device 179:2.
[    1.835669] devtmpfs: mounted
[    1.839073] Freeing unused kernel memory: 260K (c08b1000 - c08f2000)
[    1.851956] This architecture does not have kernel memory protection.

INIT: version 2.88 booting

Starting udev

[    2.513624] udevd[78]: starting version 3.2.5
[    2.527632] random: udevd: uninitialized urandom read (16 bytes read,

18 bits of entropy available)

[    2.546992] random: udevd: uninitialized urandom read (16 bytes read,

18 bits of entropy available)

[    2.566829] random: udevd: uninitialized urandom read (16 bytes read,

18 bits of entropy available)

[    2.585755] random: udevd: uninitialized urandom read (16 bytes read,

18 bits of entropy available)

[    2.668211] udevd[79]: starting eudev-3.2.5
[    3.036159] random: udevd: uninitialized urandom read (16 bytes read,

21 bits of entropy available)

[    3.061761] random: udevd: uninitialized urandom read (16 bytes read,

21 bits of entropy available)

[    4.494682] EXT4-fs (mmcblk0p2): re-mounted. Opts: data=ordered
[    5.052098] random: dd: uninitialized urandom read (512 bytes read, 34

bits of entropy available)

INIT: Entering runlevel: 5

Configuring network interfaces... [ 5.254308] net eth0: initializing
cpsw version 1.12 (0)

[    5.259812] net eth0: initialized cpsw ale version 1.4
[    5.264976] net eth0: ALE Table size 1024
[    5.272411] net eth0: phy found : id is : 0x7c0f1
[    5.285702] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready

udhcpc: started, v1.29.2

udhcpc: sending discover

udhcpc: sending discover

udhcpc: sending discover

udhcpc: no lease, forking to background

done.

Starting system message bus: [ 14.793334] random: dbus-daemon:
uninitialized urandom read (12 bytes read, 51 bits of entropy available)

[   14.831748] random: dbus-daemon: uninitialized urandom read (12 bytes

read, 52 bits of entropy available)

dbus.

Starting Xserver

Starting syslogd/klogd:

done

X.Org X Server 1.20.1

X Protocol Version 11, Revision 0

Build Operating System: Linux 4.15.0-45-generic x86_64

Current Operating System: Linux am335x-evm 4.4.19-ge581bb1cac #1 PREEMPT Thu May 24 11:42:17 CEST 2018 armv7l

Kernel command line: console=ttyO0,115200 root=/dev/mmcblk0p2 rw

Build Date: 02 April 2019 07:35:10PM

Current version of pixman: 0.34.0

Before reporting problems, check http://wiki.x.org

to make sure that you have the latest version.

Markers: (--) probed, (**) from config file, (==) default setting,

(++) from command line, (!!) notice, (II) informational,

(WW) warning, (EE) error, (NI) not implemented, (??) unknown.

(==) Log file: "/var/log/Xorg.0.log", Time: Wed Apr 3 08:25:25 2019

(==) Using config file: "/etc/X11/xorg.conf"

(==) Using system config directory "/usr/share/X11/xorg.conf.d"

Poky (Yocto Project Reference Distro) 2.6.1 am335x-evm /dev/ttyS0

am335x-evm login: The XKEYBOARD keymap compiler (xkbcomp) reports:

Quoted 5 lines

Warning: Unsupported high keycode 372 for name <I372> ignored

X11 cannot support keycodes above 255.

This warning only shows for the first high keycode.

Errors from xkbcomp are not fatal to the X server

[   15.888959] random: dbus-daemon: uninitialized urandom read (12 bytes

read, 65 bits of entropy available)

D-BUS per-session daemon address is:
unix:abstract=/tmp/dbus-JjEW6Wgjtx,guid=87af020e5c6f1a7e21d449e55ca46df5

Size 1024x768 not found in available modes

Error: No calibratable devices found.

matchbox: Cant find a keycode for keysym 269025056

matchbox: ignoring key shortcut XF86Calendar=!$contacts

matchbox: Cant find a keycode for keysym 2809

matchbox: ignoring key shortcut telephone=!$dates

matchbox: Cant find a keycode for keysym 269025050

matchbox: ignoring key shortcut XF86Start=!matchbox-remote -desktop

Failed to launch bus: Failed to execute child process ?/usr/bin? (Permission denied)

(matchbox-terminal:274): dbind-WARNING **: 08:25:27.404: Error retrieving accessibility bus address: org.a11y.Bus.Error: Failed to execute child process ?/usr/bin? (Permission denied)

[   43.718127] random: nonblocking pool is initialized

*De :* Stanisavljevic <[email protected]> *Envoyé :* lundi 18 février 2019 15:27
*À :* 'Zoran Stojsavljevic' <[email protected]> *Cc :* 'Yocto Project' <[email protected]>; 'Marc Ferland' < [email protected]>
*Objet :* RE: [yocto] yocto touchscreen

Hello Zoran

I will try these 2 ways.

Of course, the second way is the easiest, but I will try also the first way only to see if it is possible.

I will keep you in touch if the first way can work.

Best regards,

Nikola

*De :* Zoran Stojsavljevic <[email protected]> *Envoyé :* lundi 18 février 2019 15:21
*À :* Stanisavljevic <[email protected]> *Cc :* Yocto Project <[email protected]>; Marc Ferland < [email protected]>
*Objet :* Re: [yocto] yocto touchscreen

Hello Nikola,

Two things, which immediately came to my mind:

[1 - Harder way] Either to change xorg-x11-server in sumo to match at least xorg-x11-server *1.20.3;*

(harder way, since few people know exact dependencies among various
GFX packages, and what

and how many packages need to be also changed to make
xorg-x11-server 1.20.3 to work)

[2 - Easier Way] Either to migrate YOCTO to Thud, where the correct xorg-x11-server package 1.20.3

is already fixed and set!

(easier way, since exact dependencies among various GFX packages are
already set for 1.20.3)

Best Regards,

Zoran

_______

On Mon, Feb 18, 2019 at 2:48 PM Stanisavljevic <
[email protected]> wrote:

Thank you Zoran for trying to help me.
I tried to resolve the problem, but I didn’t succeed yet, I think I will to continue, and If after some time I find nothing, I’m going to migrate to the thud version.

I will maybe try to use Bugzilla

Nikola

*De :* Zoran Stojsavljevic <[email protected]> *Envoyé :* mardi 5 février 2019 19:28
*À :* Stanisavljevic <[email protected]>
*Cc :* Yocto Project <[email protected]>; [email protected] *Objet :* Re: [yocto] yocto touchscreen

Hello Nikola,

Let us try to cut to the chase!

After reading what Marc Ferland says/writes, and looking into the following:
https://bugzilla.redhat.com/show_bug.cgi?id=1650634

I have spotted the following:

*Pat Riehecky* *2018-11-20 14:28:22 UTC*

*the bug remains with the elrepo kernels:kernel-ml-4.19.2-1.el7.elrepo.x86_64kernel-lt-4.4.163-1.el7.elrepo.x86_64*

I never had this problem since I do not use Xorg (GFX), rather I only

use serial console from VBox VM from my BBB (pass-through).

Thus, my suggestion for you, to skip the whole mess is to rebuild your

distro *in the light of YOCTO Project 2.6.1 (thud 20.0.0.1).*

My best guess (then you'll inherit YOCTO kernel 4.20.x with fixed Xorg - X11).

I am using Fedora 29 on my laptop. Also from the bugzilla:

*Pat Riehecky* *2018-11-20 15:46:11 UTC *

*Bug resolved by rebuilding xorg-x11-server-1.20.3-1.fc29 [1] for 7.6.*

*With this in mind it appears to be an Xorg server bug rather than fbdev.*

From my HP EliteBook 840 G1 Fedora 29, Xorg.0.log - February 5th, 2019.,

I have the following:

[    26.955] Kernel command line: BOOT_IMAGE=/

*vmlinuz-4.20.6-200.fc29.x86_64*

root=/dev/mapper/fedora-root ro rd.lvm.lv=fedora/root rd.lvm.lv=fedora/swap rhgb

quiet LANG=en_US.UTF-8

[    26.955] Build Date: 11 January 2019  12:47:38PM
*[    26.955] Build ID: xorg-x11-server 1.20.3-3.fc29*
[    26.955] Current version of pixman: 0.34.0

Best Regards,
Zoran
_______

Quoted 10 lines · Zoran Stojsavljevic

Hello Nikola,

Quoted 5 lines

I created a kernel recipe with a bbappend file, and, I added the same defconfig that I used for krogoth version. The bbappend for kernel recipe concern meta-ti layer. I didn't edited defconfig file in other layers which contain a kernel recipe.

It could be some problem that Sumo does not take your bbappend file into

the

Quoted 5 lines

consideration as placed.

It could be something else, as well.

I have the same issue with my defconfig file for my Thud Beagle Bone

Black (BBB)

Quoted 1 line

standard board. Every time I recompile my YOCTO for it for different

releases, I need

Quoted 1 line

to import my specific defconfig. But I use complete different repos for

my standard

Quoted 11 lines

Beagle Bone Black than YOCTO BBB Poky reference distro.

Here is what I use in Thud (my bblayers.conf):

POKY_BBLAYERS_CONF_VERSION = "2"
BBPATH = "${TOPDIR}"
BBFILES ?= ""

BBLAYERS ?= " \
    /home/user/projects2/beaglebone-black/yocto-thud/meta-bbb \

/home/user/projects2/beaglebone-black/yocto-thud/meta-openembedded/meta-networking \

Quoted 1 line

/home/user/projects2/beaglebone-black/yocto-thud/meta-openembedded/meta-oe \

Quoted 1 line

/home/user/projects2/beaglebone-black/yocto-thud/meta-openembedded/meta-python \

Quoted 5 lines
    /home/user/projects2/beaglebone-black/yocto-thud/meta-qt5 \
    /home/user/projects2/beaglebone-black/yocto-thud/poky/meta \
    /home/user/projects2/beaglebone-black/yocto-thud/poky/meta-poky"

There, I replace defconfig in this layer:

/home/user/projects2/beaglebone-black/yocto-thud/meta-bbb

Quoted 4 lines

with my own defconfig.

In the directory:

/home/user/projects2/beaglebone-black/yocto-thud/meta-bbb/recipes-kernel/linux/linux-stable-4.19/beaglebone

Quoted 2 lines

If you use only Poky repository, then you need to read the following

paragraph (how to use

Quoted 3 lines

your defconfig with Poky):

[2.3.3. Changing the Configuration] YOCTO Project Linux Development

Manual

Quoted 1 line

https://www.yoctoproject.org/docs/2.5/kernel-dev/kernel-dev.html#using-an-in-tree-defconfig-file

Quoted 9 lines

2.3.3. Changing the Configuration

I hope this will help. Please, keep us posted!

Zoran
_______

On Tue, Feb 5, 2019 at 10:54 AM Stanisavljevic <

Quoted 6 lines · [email protected]> wrote:
Quoted 6 lines

Hy Zoran

Thank's to take time to answer

I created a kernel recipe with a bbappend file, and, I added the same

defconfig that I used for krogoth version.

Quoted 2 lines
Quoted 2 lines

The bbappend for kernel recipe concern meta-ti layer.
I didn't edited defconfig file in other layers which contain a kernel

recipe.

Quoted 2 lines
Quoted 2 lines

I think it's a problem which concern the screen resolution, screen

frequency and adc touchscreen.

Quoted 1 line
Quoted 1 line

Something is different between the krogoth and sumo version, but I

didn't find what is changed...

Quoted 3 lines
Quoted 3 lines

Xrandr show that problem is maybe around the screen resolution. It's show the next message : "Size 1024x768 not found in available

modes"

Quoted 1 line
Quoted 1 line

Maybe it was changed between krogoth and sumo version...but I don't

know where it is indicated if sources files...

Quoted 2 lines
Quoted 2 lines

What do you think ? problem can be around the screen resolution, screen

frequency and adc touchscreen ?

Quoted 11 lines
Quoted 11 lines

Nikola

-----Message d'origine-----
De : Zoran Stojsavljevic <[email protected]> Envoyé : lundi 4 février 2019 17:08
À : Stanisavljevic <[email protected]> Cc : Yocto Project <[email protected]> Objet : Re: [yocto] yocto touchscreen

Quoted 1 line

I built a first version of this os with version krogoth and it works

fine.

Quoted 13 lines
Quoted 13 lines
Quoted 4 lines

Now I build a second version of this os with version sumo and the touch screen works fine during boot process but when kernel is loaded, touchscreen freeze / lock and impossible to use it.

Did you compare Krogoth kernel defconfig with Sumo kernel defconfig?

May there are some mismatches in drivers' setup between these two?

Zoran
_______

On Mon, Feb 4, 2019 at 12:24 PM Stanisavljevic <

Quoted 9 lines · [email protected]> wrote:
Quoted 9 lines
Quoted 9 lines

Hy Team,

I have a problem

Quoted 5 lines
Quoted 5 lines
Quoted 5 lines

I buid a custom os for AM335x processor and I used yocto to do it.

I build a first version of this os with version krogoth and it work

fine.

Quoted 4 lines
Quoted 4 lines
Quoted 4 lines

Now I build a second version of this os with version sumo and the

touchscreen work fine during boot process but when kernel is loaded, touchscreen freeze / lock and impossible to use it.

Quoted 2 lines
Quoted 2 lines
Quoted 2 lines

The terminal is printed on the touchscreen but the screen is locked,

impossible to write a command or to move the mouse to select, ….

Quoted 4 lines
Quoted 4 lines
Quoted 4 lines

Here is the log of boot to the user session (log got with serial

communication between PC and board) :

Quoted 73 lines
Quoted 73 lines
Quoted 73 lines

U-Boot SPL 2017.05-00001-g041a398 (May 02 2018 - 18:36:57)

Trying to boot from MMC1

reading uboot.env

reading u-boot.img

reading u-boot.img

reading u-boot.img

reading u-boot.img

U-Boot 2017.05-00001-g041a398 (May 02 2018 - 18:36:57 +0200)

CPU : AM335X-GP rev 2.1

Model: TI AM335x EVM-SK

DRAM: 256 MiB

NAND: 0 MiB

MMC: OMAP SD/MMC: 0, OMAP SD/MMC: 1

reading uboot.env

ERROR: No USB device found

at drivers/usb/gadget/ether.c:2709/usb_ether_init()

Net: CACHE: Misaligned operation at range [8df323c0, 8df32464]

Warning: ethernet@4a100000 using MAC address from ROM

eth0: ethernet@4a100000

Hit any key to stop autoboot: 0

reading zImage

3412752 bytes read in 251 ms (13 MiB/s)

reading dtb

39733 bytes read in 12 ms (3.2 MiB/s)

## Flattened Device Tree blob at 82000000

Booting using the fdt blob at 0x82000000

Loading Device Tree to 8df19000, end 8df25b34 ... OK

Starting kernel ...

Quoted 7 lines
Quoted 7 lines
Quoted 7 lines
[    0.000000] Booting Linux on physical CPU 0x0
[    0.000000] Initializing cgroup subsys cpu
[    0.000000] Initializing cgroup subsys cpuacct
[    0.000000] Linux version 4.4.19-ge581bb1cac

(polycaptil@polycaptil-HP-Notebook) (gcc version 5.3.0 (GCC) ) #1 PREEMPT Thu May 24 11:42:17 CEST 2018

Quoted 2 lines
Quoted 2 lines
Quoted 2 lines
[    0.000000] CPU: ARMv7 Processor [413fc082] revision 2 (ARMv7),

cr=10c5387d

Quoted 2 lines
Quoted 2 lines
Quoted 2 lines
[    0.000000] CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing

instruction cache

Quoted 5 lines
Quoted 5 lines
Quoted 5 lines
[    0.000000] Machine model: TI AM335x EVM-SK
[    0.000000] cma: Reserved 48 MiB at 0x8a800000
Quoted 7 lines
Quoted 7 lines
Quoted 7 lines
[    0.000000] Memory policy: Data cache writeback
[    0.000000] CPU: All CPU(s) started in SVC mode.
[    0.000000] AM335X ES2.1 (sgx neon )
[    0.000000] Built 1 zonelists in Zone order, mobility grouping

on. Total pages: 64960

Quoted 2 lines
Quoted 2 lines
Quoted 2 lines
[    0.000000] Kernel command line: console=ttyO0,115200

root=/dev/mmcblk0p3 rw

Quoted 4 lines
Quoted 4 lines
Quoted 4 lines
[    0.000000] PID hash table entries: 1024 (order: 0, 4096 bytes)
[    0.000000] Dentry cache hash table entries: 32768 (order: 5,

131072 bytes)

Quoted 2 lines
Quoted 2 lines
Quoted 2 lines
[    0.000000] Inode-cache hash table entries: 16384 (order: 4, 65536

bytes)

Quoted 2 lines
Quoted 2 lines
Quoted 2 lines
[    0.000000] Memory: 200444K/262144K available (6495K kernel code,

313K rwdata, 2368K rodata, 260K init, 265K bss, 12548K reserved, 49152K cma-reserved, 0K highmem)

Quoted 17 lines
Quoted 17 lines
Quoted 17 lines
[    0.000000] Virtual kernel memory layout:
[    0.000000]     vector  : 0xffff0000 - 0xffff1000   (   4 kB)
[    0.000000]     fixmap  : 0xffc00000 - 0xfff00000   (3072 kB)
[    0.000000]     vmalloc : 0xd0800000 - 0xff800000   ( 752 MB)
[    0.000000]     lowmem  : 0xc0000000 - 0xd0000000   ( 256 MB)
[    0.000000]     pkmap   : 0xbfe00000 - 0xc0000000   (   2 MB)
[    0.000000]     modules : 0xbf000000 - 0xbfe00000   (  14 MB)
[    0.000000]       .text : 0xc0008000 - 0xc08b0034   (8865 kB)
Quoted 7 lines
Quoted 7 lines
Quoted 7 lines
[    0.000000]       .init : 0xc08b1000 - 0xc08f2000   ( 260 kB)
[    0.000000]       .data : 0xc08f2000 - 0xc09407f0   ( 314 kB)
[    0.000000]        .bss : 0xc09407f0 - 0xc0982d58   ( 266 kB)
[    0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=1,

Nodes=1

Quoted 8 lines
Quoted 8 lines
Quoted 8 lines
[    0.000000] Preemptible hierarchical RCU implementation.
[    0.000000]  Build-time adjustment of leaf fanout to 32.
[    0.000000] NR_IRQS:16 nr_irqs:16 16
[    0.000000] IRQ: Found an INTC at 0xfa200000 (revision 5.0) with

128 interrupts

Quoted 4 lines
Quoted 4 lines
Quoted 4 lines
[    0.000000] OMAP clockevent source: timer2 at 24000000 Hz
[    0.000015] sched_clock: 32 bits at 24MHz, resolution 41ns, wraps

every 89478484971ns

Quoted 2 lines
Quoted 2 lines
Quoted 2 lines
[    0.000036] clocksource: timer1: mask: 0xffffffff max_cycles:

0xffffffff, max_idle_ns: 79635851949 ns

Quoted 8 lines
Quoted 8 lines
Quoted 8 lines
[    0.000047] OMAP clocksource: timer1 at 24000000 Hz
[    0.000222] clocksource_probe: no matching clocksources found
[    0.000415] Console: colour dummy device 80x30
[    0.000442] WARNING: Your 'console=ttyO0' has been replaced by

'ttyS0'

Quoted 10 lines
Quoted 10 lines
Quoted 10 lines
[    0.000448] This ensures that you still see kernel messages. Please
[    0.000454] update your kernel commandline.
[    0.000473] Calibrating delay loop... 795.44 BogoMIPS (lpj=3977216)
[    0.089064] pid_max: default: 32768 minimum: 301
[    0.089193] Mount-cache hash table entries: 1024 (order: 0, 4096

bytes)

Quoted 2 lines
Quoted 2 lines
Quoted 2 lines
[    0.089205] Mountpoint-cache hash table entries: 1024 (order: 0,

4096 bytes)

Quoted 9 lines
Quoted 9 lines
Quoted 9 lines
[    0.089932] Initializing cgroup subsys io
[    0.089964] Initializing cgroup subsys memory
[    0.090005] Initializing cgroup subsys devices
[    0.090021] Initializing cgroup subsys freezer
Quoted 7 lines
Quoted 7 lines
Quoted 7 lines
[    0.090036] Initializing cgroup subsys perf_event
[    0.090048] Initializing cgroup subsys pids
[    0.090078] CPU: Testing write buffer coherency: ok
[    0.090499] Setting up static identity map for 0x80008200 -

0x80008258

Quoted 4 lines
Quoted 4 lines
Quoted 4 lines
[    0.092680] devtmpfs: initialized
[    0.105440] VFP support v0.3: implementor 41 architecture 3 part

30 variant c rev 3

Quoted 4 lines
Quoted 4 lines
Quoted 4 lines
[    0.120529] omap_hwmod: debugss: _wait_target_disable failed
[    0.175584] clocksource: jiffies: mask: 0xffffffff max_cycles:

0xffffffff, max_idle_ns: 19112604462750000 ns

Quoted 6 lines
Quoted 6 lines
Quoted 6 lines
[    0.179852] pinctrl core: initialized pinctrl subsystem
[    0.181216] NET: Registered protocol family 16
[    0.183420] DMA: preallocated 256 KiB pool for atomic coherent

allocations

Quoted 5 lines
Quoted 5 lines
Quoted 5 lines
[    0.209061] cpuidle: using governor ladder
[    0.239048] cpuidle: using governor menu
Quoted 7 lines
Quoted 7 lines
Quoted 7 lines
[    0.243661] OMAP GPIO hardware version 0.1
[    0.254360] hw-breakpoint: debug architecture 0x4 unsupported.
[    0.297629] edma 49000000.edma: TI EDMA DMA engine driver
[    0.298606] reg-fixed-voltage fixedregulator@2: could not find

pctldev for node /ocp/l4_wkup@44c00000/scm@210000/pinmux@800/pinmux_wl12xx_gpio, deferring probe

Quoted 2 lines
Quoted 2 lines
Quoted 2 lines
[    0.302364] omap_i2c 44e0b000.i2c: could not find pctldev for node

/ocp/l4_wkup@44c00000/scm@210000/pinmux@800/pinmux_i2c0_pins, deferring probe

Quoted 8 lines
Quoted 8 lines
Quoted 8 lines
[    0.302525] media: Linux media interface: v0.10
[    0.302588] Linux video capture interface: v2.00
[    0.302638] pps_core: LinuxPPS API ver. 1 registered
[    0.302646] pps_core: Software ver. 5.3.6 - Copyright 2005-2007

Rodolfo Giometti <[email protected]>

Quoted 7 lines
Quoted 7 lines
Quoted 7 lines
[    0.302676] PTP clock support registered
[    0.302741] EDAC MC: Ver: 3.0.0
[    0.303966] omap-mailbox 480c8000.mailbox: omap mailbox rev 0x400
Quoted 7 lines
Quoted 7 lines
Quoted 7 lines
[    0.304332] Advanced Linux Sound Architecture Driver Initialized.
[    0.305512] clocksource: Switched to clocksource timer1
[    0.316775] NET: Registered protocol family 2
[    0.317599] TCP established hash table entries: 2048 (order: 1,

8192 bytes)

Quoted 2 lines
Quoted 2 lines
Quoted 2 lines
[    0.317636] TCP bind hash table entries: 2048 (order: 1, 8192

bytes)

Quoted 2 lines
Quoted 2 lines
Quoted 2 lines
[    0.317663] TCP: Hash tables configured (established 2048 bind

2048)

Quoted 7 lines
Quoted 7 lines
Quoted 7 lines
[    0.317748] UDP hash table entries: 256 (order: 0, 4096 bytes)
[    0.317767] UDP-Lite hash table entries: 256 (order: 0, 4096 bytes)
[    0.317925] NET: Registered protocol family 1
Quoted 7 lines
Quoted 7 lines
Quoted 7 lines
[    0.318352] RPC: Registered named UNIX socket transport module.
[    0.318366] RPC: Registered udp transport module.
[    0.318372] RPC: Registered tcp transport module.
[    0.318379] RPC: Registered tcp NFSv4.1 backchannel transport

module.

Quoted 2 lines
Quoted 2 lines
Quoted 2 lines
[    0.319330] hw perfevents: enabled with armv7_cortex_a8 PMU

driver, 5 counters available

Quoted 7 lines
Quoted 7 lines
Quoted 7 lines
[    0.321392] futex hash table entries: 256 (order: -1, 3072 bytes)
[    0.329780] squashfs: version 4.0 (2009/01/31) Phillip Lougher
[    0.330717] NFS: Registering the id_resolver key type
Quoted 7 lines
Quoted 7 lines
Quoted 7 lines
[    0.330798] Key type id_resolver registered
[    0.330807] Key type id_legacy registered
[    0.330886] ntfs: driver 2.1.32 [Flags: R/O].
[    0.334673] Block layer SCSI generic (bsg) driver version 0.4

loaded (major 248)

Quoted 8 lines
Quoted 8 lines
Quoted 8 lines
[    0.334706] io scheduler noop registered
[    0.334719] io scheduler deadline registered
[    0.334877] io scheduler cfq registered (default)
[    0.336555] pinctrl-single 44e10800.pinmux: 142 pins at pa

f9e10800 size 568

Quoted 4 lines
Quoted 4 lines
Quoted 4 lines
[    0.339415] backlight supply power not found, using dummy regulator
[    0.402480] Serial: 8250/16550 driver, 10 ports, IRQ sharing

disabled

Quoted 2 lines
Quoted 2 lines
Quoted 2 lines
[    0.406962] 44e09000.serial: ttyS0 at MMIO 0x44e09000 (irq = 158,

base_baud = 3000000) is a 8250

Quoted 4 lines
Quoted 4 lines
Quoted 4 lines
[    1.017357] console [ttyS0] enabled
[    1.022206] 48022000.serial: ttyS1 at MMIO 0x48022000 (irq = 159,

base_baud = 3000000) is a 8250

Quoted 4 lines
Quoted 4 lines
Quoted 4 lines
[    1.032273] [drm] Initialized drm 1.1.0 20060810
[    1.039564] [drm] Supports vblank timestamp caching Rev 2

(21.10.2013).

Quoted 13 lines
Quoted 13 lines
Quoted 13 lines
[    1.046349] [drm] No driver support for vblank timestamp query.
[    1.062121] Console: switching to colour frame buffer device 60x34
[    1.070360] tilcdc 4830e000.lcdc: fb0:  frame buffer device
[    1.105531] [drm] Initialized tilcdc 1.0.0 20121205 on minor 0
[    1.118644] loop: module loaded
[    1.124253] libphy: Fixed MDIO Bus: probed
Quoted 7 lines
Quoted 7 lines
Quoted 7 lines
[    1.185550] davinci_mdio 4a101000.mdio: davinci mdio revision 1.6
[    1.191695] davinci_mdio 4a101000.mdio: detected phy mask fffffffe
[    1.198786] libphy: 4a101000.mdio: probed
[    1.202886] davinci_mdio 4a101000.mdio: phy[0]: device

4a101000.mdio:00, driver SMSC LAN8710/LAN8720

Quoted 2 lines
Quoted 2 lines
Quoted 2 lines
[    1.212890] cpsw 4a100000.ethernet: Detected MACID =

a0:f6:fd:4c:a6:ba

Quoted 2 lines
Quoted 2 lines
Quoted 2 lines
[    1.220531] cpsw 4a100000.ethernet: cpsw: Detected MACID =

c4:ed:ba:88:2a:92

Quoted 6 lines
Quoted 6 lines
Quoted 6 lines
[    1.229382] mousedev: PS/2 mouse device common for all mice
[    1.235845] i2c /dev entries driver
[    1.240508] cpuidle: enable-method property 'ti,am3352' found

operations

Quoted 4 lines
Quoted 4 lines
Quoted 4 lines
[    1.248197] omap_hsmmc 48060000.mmc: Got CD GPIO
[    1.275713] pinctrl-single 44e10800.pinmux: bad data for mux

pinmux_mmc2_pins

Quoted 2 lines
Quoted 2 lines
Quoted 2 lines
[    1.282895] pinctrl-single 44e10800.pinmux: no pins entries for

pinmux_mmc2_pins

Quoted 5 lines
Quoted 5 lines
Quoted 5 lines
[    1.317159] ledtrig-cpu: registered to indicate activity on CPUs
[    1.326069] NET: Registered protocol family 10
Quoted 7 lines
Quoted 7 lines
Quoted 7 lines
[    1.332092] sit: IPv6 over IPv4 tunneling driver
[    1.337715] NET: Registered protocol family 17
[    1.342510] Key type dns_resolver registered
[    1.347095] omap_voltage_late_init: Voltage driver support not

added

Quoted 2 lines
Quoted 2 lines
Quoted 2 lines
[    1.407145] tps65910-rtc tps65910-rtc: rtc core: registered

tps65910-rtc as rtc0

Quoted 8 lines
Quoted 8 lines
Quoted 8 lines
[    1.415278] omap_i2c 44e0b000.i2c: bus 0 rev0.11 at 400 kHz
[    1.421665] omap_hsmmc 48060000.mmc: Got CD GPIO
[    1.426813] vmmc: supplied by vbat
[    1.466341] pinctrl-single 44e10800.pinmux: bad data for mux

pinmux_mmc2_pins

Quoted 2 lines
Quoted 2 lines
Quoted 2 lines
[    1.474737] pinctrl-single 44e10800.pinmux: no pins entries for

pinmux_mmc2_pins

Quoted 2 lines
Quoted 2 lines
Quoted 2 lines
[    1.513247] mmc0: host does not support reading read-only switch,

assuming write-enable

Quoted 10 lines
Quoted 10 lines
Quoted 10 lines
[    1.523414] mmc0: new high speed SDHC card at address 0001
[    1.529635] mmcblk0: mmc0:0001 AS 3.72 GiB
[    1.535996]  mmcblk0: p1 p2 p3
[    1.595932] vdd_mpu: supplied by vbat
[    1.602167] input: gpio_buttons@0 as

/devices/platform/gpio_buttons@0/input/input0

Quoted 2 lines
Quoted 2 lines
Quoted 2 lines
[    1.618291] tps65910-rtc tps65910-rtc: setting system clock to
2019-02-01 20:07:49 UTC (1549051669)
Quoted 8 lines
Quoted 8 lines
Quoted 8 lines
[    1.639394] lis3_reg: disabling
[    1.655732] ALSA device list:
[    1.658720]   No soundcards found.
[    1.678290] EXT4-fs (mmcblk0p3): couldn't mount as ext3 due to

feature incompatibilities

Quoted 2 lines
Quoted 2 lines
Quoted 2 lines
[    1.696920] EXT4-fs (mmcblk0p3): couldn't mount as ext2 due to

feature incompatibilities

Quoted 4 lines
Quoted 4 lines
Quoted 4 lines
[    2.183999] EXT4-fs (mmcblk0p3): recovery complete
[    2.196864] EXT4-fs (mmcblk0p3): mounted filesystem with ordered

data mode. Opts: (null)

Quoted 6 lines
Quoted 6 lines
Quoted 6 lines
[    2.205084] VFS: Mounted root (ext4 filesystem) on device 179:3.
[    2.225670] devtmpfs: mounted
[    2.235781] Freeing unused kernel memory: 260K (c08b1000 -

c08f2000)

Quoted 2 lines
Quoted 2 lines
Quoted 2 lines
[    2.242162] This architecture does not have kernel memory

protection.

Quoted 8 lines
Quoted 8 lines
Quoted 8 lines

INIT: version 2.88 booting

Starting udev

[    3.090091] udevd[78]: starting version 3.2.5
[    3.106175] random: udevd: uninitialized urandom read (16 bytes

read, 26 bits of entropy available)

Quoted 2 lines
Quoted 2 lines
Quoted 2 lines
[    3.118667] random: udevd: uninitialized urandom read (16 bytes

read, 26 bits of entropy available)

Quoted 2 lines
Quoted 2 lines
Quoted 2 lines
[    3.128014] random: udevd: uninitialized urandom read (16 bytes

read, 26 bits of entropy available)

Quoted 2 lines
Quoted 2 lines
Quoted 2 lines
[    3.137335] random: udevd: uninitialized urandom read (16 bytes

read, 26 bits of entropy available)

Quoted 4 lines
Quoted 4 lines
Quoted 4 lines
[    3.218433] udevd[79]: starting eudev-3.2.5
[    3.325886] random: udevd: uninitialized urandom read (16 bytes

read, 29 bits of entropy available)

Quoted 2 lines
Quoted 2 lines
Quoted 2 lines
[    3.346155] random: udevd: uninitialized urandom read (16 bytes

read, 29 bits of entropy available)

Quoted 4 lines
Quoted 4 lines
Quoted 4 lines
[    4.820708] EXT4-fs (mmcblk0p3): re-mounted. Opts: data=ordered
[    5.548283] random: dd: uninitialized urandom read (512 bytes

read, 43 bits of entropy available)

Quoted 4 lines
Quoted 4 lines
Quoted 4 lines

INIT: Entering runlevel: 5

Configuring network interfaces... [ 5.820546] net eth0:

initializing cpsw version 1.12 (0)

Quoted 10 lines
Quoted 10 lines
Quoted 10 lines
[    5.825987] net eth0: initialized cpsw ale version 1.4
[    5.831150] net eth0: ALE Table size 1024
[    5.838581] net eth0: phy found : id is : 0x7c0f1
[    5.851838] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
[    9.896392] cpsw 4a100000.ethernet eth0: Link is Up - 100Mbps/Full

- flow control rx/tx

Quoted 17 lines
Quoted 17 lines
Quoted 17 lines
[    9.904635] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready

chown: unrecognized option '--reference=/etc/resolv.conf'

BusyBox v1.27.2 (2018-11-05 21:16:09 UTC) multi-call binary.

Usage: chown [-Rh]... USER[:[GRP]] FILE...

chmod: unrecognized option '--reference=/etc/resolv.conf'

BusyBox v1.27.2 (2018-11-05 21:16:09 UTC) multi-call binary.

Quoted 5 lines
Quoted 5 lines
Quoted 5 lines

Usage: chmod [-R] MODE[,MODE]... FILE...

done.

Starting system message bus: [ 14.887099] random: dbus-daemon:

uninitialized urandom read (12 bytes read, 62 bits of entropy available)

Quoted 2 lines
Quoted 2 lines
Quoted 2 lines
[   14.912318] random: dbus-daemon: uninitialized urandom read (12

bytes read, 62 bits of entropy available)

Quoted 6 lines
Quoted 6 lines
Quoted 6 lines

dbus.

Starting OpenBSD Secure Shell server: sshd

[   15.393971] random: sshd: uninitialized urandom read (32 bytes

read, 65 bits of entropy available)

Quoted 96 lines
Quoted 96 lines
Quoted 96 lines

done.

Starting Xserver

Starting DHCP server:

.

starting DNS forwarder and DHCP server: dnsmasq...

X.Org X Server 1.19.6

Release Date: 2017-12-20

X Protocol Version 11, Revision 0

Build Operating System: Linux 4.15.0-38-generic x86_64

Current Operating System: Linux polycaptil-machine-am335x-evmsk 4.4.19-ge581bb1cac #1 PREEMPT Thu May 24 11:42:17 CEST 2018 armv7l

Kernel command line: console=ttyO0,115200 root=/dev/mmcblk0p3 rw

Build Date: 05 November 2018 09:33:21PM

Current version of pixman: 0.34.0

Before reporting problems, check http://wiki.x.org

to make sure that you have the latest version.

Markers: (--) probed, (**) from config file, (==) default setting,

(++) from command line, (!!) notice, (II) informational,

(WW) warning, (EE) error, (NI) not implemented, (??) unknown.

(==) Log file: "/var/log/Xorg.0.log", Time: Fri Feb 1 20:08:02 2019

(==) Using config file: "/etc/X11/xorg.conf"

(==) Using system config directory "/usr/share/X11/xorg.conf.d"

done.

Starting HOSTAP Daemon: Configuration file: /etc/hostapd.conf

nl80211: 'nl80211' generic netlink not found

Failed to initialize driver 'nl80211'

wlan0: interface state UNINITIALIZED->DISABLED

wlan0: AP-DISABLED

hostapd_free_hapd_data: Interface wlan0 wasn't started

Starting ntpd: done

Starting syslogd/klogd: done

Starting crond: OK

Poky (Yocto Project Reference Distro) 2.5
polycaptil-machine-am335x-evmsk /dev/ttyS0

polycaptil-machine-am335x-evmsk login: D-BUS per-session daemon address is:
unix:abstract=/tmp/dbus-07WuJSySeb,guid=a3e41f2692316c19766e95535c54a7 25

Size 1024x768 not found in available modes

Error: No calibratable devices found.

matchbox: Cant find a keycode for keysym 269025056

matchbox: ignoring key shortcut XF86Calendar=!$contacts

matchbox: Cant find a keycode for keysym 2809

matchbox: ignoring key shortcut telephone=!$dates

matchbox: Cant find a keycode for keysym 269025050

Quoted 8 lines
Quoted 8 lines
Quoted 8 lines

matchbox: ignoring key shortcut XF86Start=!matchbox-remote -desktop

dbus-daemon[358]: Activating service name='org.a11y.atspi.Registry' requested by ':1.0' (uid=0 pid=354 comm="matchbox-terminal ")

dbus-daemon[358]: Successfully activated service

'org.a11y.atspi.Registry'

Quoted 23 lines
Quoted 23 lines
Quoted 22 lines

SpiRegistry daemon is running with well-known name - org.a11y.atspi.Registry

[   30.662697] random: nonblocking pool is initialized

Poky (Yocto Project Reference Distro) 2.5
polycaptil-machine-am335x-evmsk /dev/ttyS0

Thank’s to take time to read my message.

N.Stanisavljevic

--
_______________________________________________
yocto mailing list
[email protected]
https://lists.yoctoproject.org/listinfo/yocto

#12 lore raw

Hello Zoran

I tried to change screen resolution with xrandr to change the screen resolution to 480x272 (it is the screen resolution of the touchscreen) but it’s changes nothing screen resolution seems to stay to 1024x768

I defined on the device tree the screen resolution but it’s like it was not taken in account

Here is the definition of the touchscreen resolution in the device tree :

                               display-timings {

                                               480x272 {

                                                               hactive                 = <480>;

                                                               vactive                 = <272>;

                                                               hback-porch      = <43>;

                                                               hfront-porch     = <8>;

                                                               hsync-len            = <4>;

                                                               vback-porch      = <12>;

                                                               vfront-porch     = <4>;

                                                               vsync-len            = <10>;

                                                               clock-frequency = <9000000>;

                                                               hsync-active      = <0>;

                                                               vsync-active      = <0>;

                                               };

I use a DTB file from krogoth version, because, I tried to use the DTB file generated for sumo thud and warrior version but it’s didn’t work.

I only update files in rootfs partition (with developed versions) and not boot partition

While boot process is running, the splashscreen appear correctly, but immediately when the terminal session appears, the touchscreen lock.

Here is what is in Xorg.0.log

root@am335x-evm:~# cat /var/log/Xorg.0.log
[    15.212]

X.Org X Server 1.20.4

X Protocol Version 11, Revision 0

[    15.212] Build Operating System: Linux 4.15.0-45-generic x86_64
[    15.212] Current Operating System: Linux am335x-evm 4.4.19-ge581bb1cac #1 PREEMPT Thu May 24 11:42:17 CEST 2018 armv7l
[    15.213] Kernel command line: console=ttyO0,115200 root=/dev/mmcblk0p2 rw
[    15.213] Build Date: 10 April 2019  08:15:46PM
[    15.213]
[    15.213] Current version of pixman: 0.38.0
[    15.213]    Before reporting problems, check http://wiki.x.org

to make sure that you have the latest version.

[    15.213] Markers: (--) probed, (**) from config file, (==) default setting,

(++) from command line, (!!) notice, (II) informational,

(WW) warning, (EE) error, (NI) not implemented, (??) unknown.

[    15.213] (==) Log file: "/var/log/Xorg.0.log", Time: Thu Apr 11 15:51:53 2019
[    15.219] (==) Using config file: "/etc/X11/xorg.conf"
[    15.219] (==) Using system config directory "/usr/share/X11/xorg.conf.d"
[    15.235] (==) ServerLayout "Builtin Default Layout"
[    15.235] (**) |-->Screen "Builtin Default fbdev Screen 0" (0)
[    15.235] (**) |   |-->Monitor "Builtin Default Monitor"
[    15.237] (**) |   |-->Device "Builtin Default fbdev Device 0"
[    15.237] (==) Automatically adding devices
[    15.237] (==) Automatically enabling devices
[    15.237] (==) Automatically adding GPU devices
[    15.237] (==) Max clients allowed: 256, resource mask: 0x1fffff
[    15.238] (WW) The directory "/usr/share/fonts/X11/misc/" does not exist.
[    15.238]    Entry deleted from font path.
[    15.239] (WW) The directory "/usr/share/fonts/X11/TTF/" does not exist.
[    15.239]    Entry deleted from font path.
[    15.239] (WW) The directory "/usr/share/fonts/X11/OTF/" does not exist.
[    15.239]    Entry deleted from font path.
[    15.239] (WW) The directory "/usr/share/fonts/X11/Type1/" does not exist.
[    15.239]    Entry deleted from font path.
[    15.239] (WW) The directory "/usr/share/fonts/X11/100dpi/" does not exist.
[    15.239]    Entry deleted from font path.
[    15.239] (WW) The directory "/usr/share/fonts/X11/75dpi/" does not exist.
[    15.239]    Entry deleted from font path.
[    15.239] (==) FontPath set to:
[    15.239] (==) ModulePath set to "/usr/lib/xorg/modules"
[    15.239] (II) The server relies on udev to provide the list of input devices.

If no devices become available, reconfigure udev or disable AutoAddDevices.

[    15.239] (II) Loader magic: 0x7f73dd78
[    15.239] (II) Module ABI versions:
[    15.239]    X.Org ANSI C Emulation: 0.4
[    15.239]    X.Org Video Driver: 24.0
[    15.239]    X.Org XInput driver : 24.1
[    15.239]    X.Org Server Extension : 10.0
[    15.245] (II) xfree86: Adding drm device (/dev/dri/card0)
[    15.248] (II) no primary bus or device found
[    15.248]    falling back to /sys/devices/platform/ocp/4830e000.lcdc/drm/card0
[    15.249] (II) "glx" will be loaded. This was enabled by default and also specified in the config file.
[    15.249] (II) LoadModule: "extmod"
[    15.249] (II) Module "extmod" already built-in
[    15.249] (II) LoadModule: "dbe"
[    15.249] (II) Module "dbe" already built-in
[    15.249] (II) LoadModule: "glx"
[    15.261] (WW) Warning, couldn't open module glx
[    15.261] (EE) Failed to load module "glx" (module does not exist, 0)
[    15.262] (II) LoadModule: "record"
[    15.262] (II) Module "record" already built-in
[    15.262] (II) LoadModule: "dri"
[    15.262] (II) Module "dri" already built-in
[    15.262] (II) LoadModule: "fbdev"
[    15.262] (II) Loading /usr/lib/xorg/modules/drivers/fbdev_drv.so
[    15.267] (II) Module fbdev: vendor="X.Org Foundation"
[    15.267]    compiled for 1.20.4, module version = 0.5.0
[    15.267]    Module class: X.Org Video Driver
[    15.267]    ABI class: X.Org Video Driver, version 24.0
[    15.267] (II) FBDEV: driver for framebuffer: fbdev
[    15.268] (--) using VT number 3
[    15.277] (WW) Falling back to old probe method for fbdev
[    15.277] (II) Loading sub module "fbdevhw"
[    15.277] (II) LoadModule: "fbdevhw"
[    15.277] (II) Loading /usr/lib/xorg/modules/libfbdevhw.so
[    15.281] (II) Module fbdevhw: vendor="X.Org Foundation"
[    15.281]    compiled for 1.20.4, module version = 0.0.2
[    15.281]    ABI class: X.Org Video Driver, version 24.0
[    15.281] (II) FBDEV(0): using default device
[    15.282] (WW) VGA arbiter: cannot open kernel arbiter, no multi-card support
[    15.282] (II) FBDEV(0): Creating default Display subsection in Screen section

"Builtin Default fbdev Screen 0" for depth/fbbpp 24/32

[    15.282] (==) FBDEV(0): Depth 24, (==) framebuffer bpp 32
[    15.282] (==) FBDEV(0): RGB weight 888
[    15.282] (==) FBDEV(0): Default visual is TrueColor
[    15.282] (==) FBDEV(0): Using gamma correction (1.0, 1.0, 1.0)
[    15.282] (II) FBDEV(0): hardware:  (video memory: 510kB)
[    15.282] (DB) xf86MergeOutputClassOptions unsupported bus type 0
[    15.282] (II) FBDEV(0): checking modes against framebuffer device...
[    15.282] (II) FBDEV(0): checking modes against monitor...
[    15.282] (II) FBDEV(0): Virtual size is 480x272 (pitch 480)
[    15.282] (**) FBDEV(0):  Built-in mode "current"
[    15.282] (==) FBDEV(0): DPI set to (96, 96)
[    15.282] (II) Loading sub module "fb"
[    15.282] (II) LoadModule: "fb"
[    15.283] (II) Loading /usr/lib/xorg/modules/libfb.so
[    15.297] (II) Module fb: vendor="X.Org Foundation"
[    15.297]    compiled for 1.20.4, module version = 1.0.0
[    15.297]    ABI class: X.Org ANSI C Emulation, version 0.4
[    15.297] (**) FBDEV(0): using shadow framebuffer
[    15.298] (II) Loading sub module "shadow"
[    15.298] (II) LoadModule: "shadow"
[    15.298] (II) Loading /usr/lib/xorg/modules/libshadow.so
[    15.304] (II) Module shadow: vendor="X.Org Foundation"
[    15.304]    compiled for 1.20.4, module version = 1.1.0
[    15.304]    ABI class: X.Org ANSI C Emulation, version 0.4
[    15.324] (==) FBDEV(0): Backing store enabled
[    15.325] (EE) FBDEV(0): FBIOPUTCMAP: Invalid argument
[    15.325] (EE) FBDEV(0): FBIOPUTCMAP: Invalid argument
[    15.325] (EE) FBDEV(0): FBIOPUTCMAP: Invalid argument
[    15.325] (EE) FBDEV(0): FBIOPUTCMAP: Invalid argument
[    15.325] (EE) FBDEV(0): FBIOPUTCMAP: Invalid argument
[    15.325] (EE) FBDEV(0): FBIOPUTCMAP: Invalid argument
[    15.325] (EE) FBDEV(0): FBIOPUTCMAP: Invalid argument
[    15.325] (EE) FBDEV(0): FBIOPUTCMAP: Invalid argument
[    15.325] (EE) FBDEV(0): FBIOPUTCMAP: Invalid argument
[    15.325] (EE) FBDEV(0): FBIOPUTCMAP: Invalid argument
[    15.325] (EE) FBDEV(0): FBIOPUTCMAP: Invalid argument
[    15.325] (EE) FBDEV(0): FBIOPUTCMAP: Invalid argument
[    15.325] (EE) FBDEV(0): FBIOPUTCMAP: Invalid argument
[    15.325] (EE) FBDEV(0): FBIOPUTCMAP: Invalid argument
[    15.325] (EE) FBDEV(0): FBIOPUTCMAP: Invalid argument
[    15.325] (EE) FBDEV(0): FBIOPUTCMAP: Invalid argument
[    15.326] (EE) FBDEV(0): FBIOPUTCMAP: Invalid argument
[    15.326] (EE) FBDEV(0): FBIOPUTCMAP: Invalid argument
[    15.326] (EE) FBDEV(0): FBIOPUTCMAP: Invalid argument
[    15.326] (EE) FBDEV(0): FBIOPUTCMAP: Invalid argument
[    15.326] (EE) FBDEV(0): FBIOPUTCMAP: Invalid argument
[    15.326] (EE) FBDEV(0): FBIOPUTCMAP: Invalid argument
[    15.326] (EE) FBDEV(0): FBIOPUTCMAP: Invalid argument
[    15.326] (EE) FBDEV(0): FBIOPUTCMAP: Invalid argument
[    15.326] (EE) FBDEV(0): FBIOPUTCMAP: Invalid argument
[    15.326] (EE) FBDEV(0): FBIOPUTCMAP: Invalid argument
[    15.326] (EE) FBDEV(0): FBIOPUTCMAP: Invalid argument
[    15.326] (EE) FBDEV(0): FBIOPUTCMAP: Invalid argument
[    15.326] (EE) FBDEV(0): FBIOPUTCMAP: Invalid argument
[    15.326] (EE) FBDEV(0): FBIOPUTCMAP: Invalid argument
[    15.326] (EE) FBDEV(0): FBIOPUTCMAP: Invalid argument
[    15.326] (EE) FBDEV(0): FBIOPUTCMAP: Invalid argument
[    15.326] (EE) FBDEV(0): FBIOPUTCMAP: Invalid argument
[    15.326] (EE) FBDEV(0): FBIOPUTCMAP: Invalid argument
[    15.326] (EE) FBDEV(0): FBIOPUTCMAP: Invalid argument
[    15.326] (EE) FBDEV(0): FBIOPUTCMAP: Invalid argument
[    15.326] (EE) FBDEV(0): FBIOPUTCMAP: Invalid argument
[    15.326] (EE) FBDEV(0): FBIOPUTCMAP: Invalid argument
[    15.326] (EE) FBDEV(0): FBIOPUTCMAP: Invalid argument
[    15.326] (EE) FBDEV(0): FBIOPUTCMAP: Invalid argument
[    15.327] (EE) FBDEV(0): FBIOPUTCMAP: Invalid argument
[    15.327] (EE) FBDEV(0): FBIOPUTCMAP: Invalid argument
[    15.327] (EE) FBDEV(0): FBIOPUTCMAP: Invalid argument
[    15.327] (EE) FBDEV(0): FBIOPUTCMAP: Invalid argument
[    15.327] (EE) FBDEV(0): FBIOPUTCMAP: Invalid argument
[    15.327] (EE) FBDEV(0): FBIOPUTCMAP: Invalid argument
[    15.327] (EE) FBDEV(0): FBIOPUTCMAP: Invalid argument
[    15.327] (EE) FBDEV(0): FBIOPUTCMAP: Invalid argument
[    15.327] (EE) FBDEV(0): FBIOPUTCMAP: Invalid argument
[    15.327] (EE) FBDEV(0): FBIOPUTCMAP: Invalid argument
[    15.327] (EE) FBDEV(0): FBIOPUTCMAP: Invalid argument
[    15.327] (EE) FBDEV(0): FBIOPUTCMAP: Invalid argument
[    15.327] (EE) FBDEV(0): FBIOPUTCMAP: Invalid argument
[    15.327] (EE) FBDEV(0): FBIOPUTCMAP: Invalid argument
[    15.327] (EE) FBDEV(0): FBIOPUTCMAP: Invalid argument
[    15.327] (EE) FBDEV(0): FBIOPUTCMAP: Invalid argument
[    15.327] (EE) FBDEV(0): FBIOPUTCMAP: Invalid argument
[    15.327] (EE) FBDEV(0): FBIOPUTCMAP: Invalid argument
[    15.327] (EE) FBDEV(0): FBIOPUTCMAP: Invalid argument
[    15.327] (EE) FBDEV(0): FBIOPUTCMAP: Invalid argument
[    15.327] (EE) FBDEV(0): FBIOPUTCMAP: Invalid argument
[    15.327] (EE) FBDEV(0): FBIOPUTCMAP: Invalid argument
[    15.327] (EE) FBDEV(0): FBIOPUTCMAP: Invalid argument
[    15.327] (EE) FBDEV(0): FBIOPUTCMAP: Invalid argument
[    15.327] (EE) FBDEV(0): FBIOPUTCMAP: Invalid argument
[    15.328] (EE) FBDEV(0): FBIOPUTCMAP: Invalid argument
[    15.328] (EE) FBDEV(0): FBIOPUTCMAP: Invalid argument
[    15.328] (EE) FBDEV(0): FBIOPUTCMAP: Invalid argument
[    15.328] (EE) FBDEV(0): FBIOPUTCMAP: Invalid argument
[    15.328] (EE) FBDEV(0): FBIOPUTCMAP: Invalid argument
[    15.328] (EE) FBDEV(0): FBIOPUTCMAP: Invalid argument
[    15.328] (EE) FBDEV(0): FBIOPUTCMAP: Invalid argument
[    15.328] (EE) FBDEV(0): FBIOPUTCMAP: Invalid argument
[    15.328] (EE) FBDEV(0): FBIOPUTCMAP: Invalid argument
[    15.328] (EE) FBDEV(0): FBIOPUTCMAP: Invalid argument
[    15.328] (EE) FBDEV(0): FBIOPUTCMAP: Invalid argument
[    15.328] (EE) FBDEV(0): FBIOPUTCMAP: Invalid argument
[    15.328] (EE) FBDEV(0): FBIOPUTCMAP: Invalid argument
[    15.328] (EE) FBDEV(0): FBIOPUTCMAP: Invalid argument
[    15.328] (EE) FBDEV(0): FBIOPUTCMAP: Invalid argument
[    15.328] (EE) FBDEV(0): FBIOPUTCMAP: Invalid argument
[    15.328] (EE) FBDEV(0): FBIOPUTCMAP: Invalid argument
[    15.328] (EE) FBDEV(0): FBIOPUTCMAP: Invalid argument
[    15.328] (EE) FBDEV(0): FBIOPUTCMAP: Invalid argument
[    15.328] (EE) FBDEV(0): FBIOPUTCMAP: Invalid argument
[    15.328] (EE) FBDEV(0): FBIOPUTCMAP: Invalid argument
[    15.328] (EE) FBDEV(0): FBIOPUTCMAP: Invalid argument
[    15.328] (EE) FBDEV(0): FBIOPUTCMAP: Invalid argument
[    15.328] (EE) FBDEV(0): FBIOPUTCMAP: Invalid argument
[    15.328] (EE) FBDEV(0): FBIOPUTCMAP: Invalid argument
[    15.329] (EE) FBDEV(0): FBIOPUTCMAP: Invalid argument
[    15.329] (EE) FBDEV(0): FBIOPUTCMAP: Invalid argument
[    15.329] (EE) FBDEV(0): FBIOPUTCMAP: Invalid argument
[    15.329] (EE) FBDEV(0): FBIOPUTCMAP: Invalid argument
[    15.329] (EE) FBDEV(0): FBIOPUTCMAP: Invalid argument
[    15.329] (EE) FBDEV(0): FBIOPUTCMAP: Invalid argument
[    15.329] (EE) FBDEV(0): FBIOPUTCMAP: Invalid argument
[    15.329] (EE) FBDEV(0): FBIOPUTCMAP: Invalid argument
[    15.329] (EE) FBDEV(0): FBIOPUTCMAP: Invalid argument
[    15.329] (EE) FBDEV(0): FBIOPUTCMAP: Invalid argument
[    15.329] (EE) FBDEV(0): FBIOPUTCMAP: Invalid argument
[    15.329] (EE) FBDEV(0): FBIOPUTCMAP: Invalid argument
[    15.329] (EE) FBDEV(0): FBIOPUTCMAP: Invalid argument
[    15.329] (EE) FBDEV(0): FBIOPUTCMAP: Invalid argument
[    15.329] (EE) FBDEV(0): FBIOPUTCMAP: Invalid argument
[    15.329] (EE) FBDEV(0): FBIOPUTCMAP: Invalid argument
[    15.329] (EE) FBDEV(0): FBIOPUTCMAP: Invalid argument
[    15.329] (EE) FBDEV(0): FBIOPUTCMAP: Invalid argument
[    15.329] (EE) FBDEV(0): FBIOPUTCMAP: Invalid argument
[    15.329] (EE) FBDEV(0): FBIOPUTCMAP: Invalid argument
[    15.329] (EE) FBDEV(0): FBIOPUTCMAP: Invalid argument
[    15.329] (EE) FBDEV(0): FBIOPUTCMAP: Invalid argument
[    15.329] (EE) FBDEV(0): FBIOPUTCMAP: Invalid argument
[    15.329] (EE) FBDEV(0): FBIOPUTCMAP: Invalid argument
[    15.329] (EE) FBDEV(0): FBIOPUTCMAP: Invalid argument
[    15.330] (EE) FBDEV(0): FBIOPUTCMAP: Invalid argument
[    15.330] (EE) FBDEV(0): FBIOPUTCMAP: Invalid argument
[    15.330] (EE) FBDEV(0): FBIOPUTCMAP: Invalid argument
[    15.330] (EE) FBDEV(0): FBIOPUTCMAP: Invalid argument
[    15.330] (EE) FBDEV(0): FBIOPUTCMAP: Invalid argument
[    15.330] (EE) FBDEV(0): FBIOPUTCMAP: Invalid argument
[    15.330] (EE) FBDEV(0): FBIOPUTCMAP: Invalid argument
[    15.330] (EE) FBDEV(0): FBIOPUTCMAP: Invalid argument
[    15.330] (EE) FBDEV(0): FBIOPUTCMAP: Invalid argument
[    15.330] (EE) FBDEV(0): FBIOPUTCMAP: Invalid argument
[    15.330] (EE) FBDEV(0): FBIOPUTCMAP: Invalid argument
[    15.330] (EE) FBDEV(0): FBIOPUTCMAP: Invalid argument
[    15.330] (EE) FBDEV(0): FBIOPUTCMAP: Invalid argument
[    15.330] (EE) FBDEV(0): FBIOPUTCMAP: Invalid argument
[    15.330] (EE) FBDEV(0): FBIOPUTCMAP: Invalid argument
[    15.330] (EE) FBDEV(0): FBIOPUTCMAP: Invalid argument
[    15.330] (EE) FBDEV(0): FBIOPUTCMAP: Invalid argument
[    15.330] (EE) FBDEV(0): FBIOPUTCMAP: Invalid argument
[    15.330] (EE) FBDEV(0): FBIOPUTCMAP: Invalid argument
[    15.330] (EE) FBDEV(0): FBIOPUTCMAP: Invalid argument
[    15.331] (EE) FBDEV(0): FBIOPUTCMAP: Invalid argument
[    15.331] (EE) FBDEV(0): FBIOPUTCMAP: Invalid argument
[    15.331] (EE) FBDEV(0): FBIOPUTCMAP: Invalid argument
[    15.331] (EE) FBDEV(0): FBIOPUTCMAP: Invalid argument
[    15.331] (EE) FBDEV(0): FBIOPUTCMAP: Invalid argument
[    15.331] (EE) FBDEV(0): FBIOPUTCMAP: Invalid argument
[    15.331] (EE) FBDEV(0): FBIOPUTCMAP: Invalid argument
[    15.331] (EE) FBDEV(0): FBIOPUTCMAP: Invalid argument
[    15.331] (EE) FBDEV(0): FBIOPUTCMAP: Invalid argument
[    15.331] (EE) FBDEV(0): FBIOPUTCMAP: Invalid argument
[    15.331] (EE) FBDEV(0): FBIOPUTCMAP: Invalid argument
[    15.331] (EE) FBDEV(0): FBIOPUTCMAP: Invalid argument
[    15.331] (EE) FBDEV(0): FBIOPUTCMAP: Invalid argument
[    15.331] (EE) FBDEV(0): FBIOPUTCMAP: Invalid argument
[    15.331] (EE) FBDEV(0): FBIOPUTCMAP: Invalid argument
[    15.331] (EE) FBDEV(0): FBIOPUTCMAP: Invalid argument
[    15.331] (EE) FBDEV(0): FBIOPUTCMAP: Invalid argument
[    15.331] (EE) FBDEV(0): FBIOPUTCMAP: Invalid argument
[    15.331] (EE) FBDEV(0): FBIOPUTCMAP: Invalid argument
[    15.331] (EE) FBDEV(0): FBIOPUTCMAP: Invalid argument
[    15.331] (EE) FBDEV(0): FBIOPUTCMAP: Invalid argument
[    15.331] (EE) FBDEV(0): FBIOPUTCMAP: Invalid argument
[    15.331] (EE) FBDEV(0): FBIOPUTCMAP: Invalid argument
[    15.331] (EE) FBDEV(0): FBIOPUTCMAP: Invalid argument
[    15.331] (EE) FBDEV(0): FBIOPUTCMAP: Invalid argument
[    15.332] (EE) FBDEV(0): FBIOPUTCMAP: Invalid argument
[    15.332] (EE) FBDEV(0): FBIOPUTCMAP: Invalid argument
[    15.332] (EE) FBDEV(0): FBIOPUTCMAP: Invalid argument
[    15.332] (EE) FBDEV(0): FBIOPUTCMAP: Invalid argument
[    15.332] (EE) FBDEV(0): FBIOPUTCMAP: Invalid argument
[    15.332] (EE) FBDEV(0): FBIOPUTCMAP: Invalid argument
[    15.332] (EE) FBDEV(0): FBIOPUTCMAP: Invalid argument
[    15.332] (EE) FBDEV(0): FBIOPUTCMAP: Invalid argument
[    15.332] (EE) FBDEV(0): FBIOPUTCMAP: Invalid argument
[    15.332] (EE) FBDEV(0): FBIOPUTCMAP: Invalid argument
[    15.332] (EE) FBDEV(0): FBIOPUTCMAP: Invalid argument
[    15.332] (EE) FBDEV(0): FBIOPUTCMAP: Invalid argument
[    15.332] (EE) FBDEV(0): FBIOPUTCMAP: Invalid argument
[    15.332] (EE) FBDEV(0): FBIOPUTCMAP: Invalid argument
[    15.332] (EE) FBDEV(0): FBIOPUTCMAP: Invalid argument
[    15.332] (EE) FBDEV(0): FBIOPUTCMAP: Invalid argument
[    15.332] (EE) FBDEV(0): FBIOPUTCMAP: Invalid argument
[    15.332] (EE) FBDEV(0): FBIOPUTCMAP: Invalid argument
[    15.332] (EE) FBDEV(0): FBIOPUTCMAP: Invalid argument
[    15.332] (EE) FBDEV(0): FBIOPUTCMAP: Invalid argument
[    15.332] (EE) FBDEV(0): FBIOPUTCMAP: Invalid argument
[    15.332] (EE) FBDEV(0): FBIOPUTCMAP: Invalid argument
[    15.332] (EE) FBDEV(0): FBIOPUTCMAP: Invalid argument
[    15.332] (EE) FBDEV(0): FBIOPUTCMAP: Invalid argument
[    15.332] (EE) FBDEV(0): FBIOPUTCMAP: Invalid argument
[    15.333] (EE) FBDEV(0): FBIOPUTCMAP: Invalid argument
[    15.333] (EE) FBDEV(0): FBIOPUTCMAP: Invalid argument
[    15.333] (EE) FBDEV(0): FBIOPUTCMAP: Invalid argument
[    15.333] (EE) FBDEV(0): FBIOPUTCMAP: Invalid argument
[    15.333] (EE) FBDEV(0): FBIOPUTCMAP: Invalid argument
[    15.333] (EE) FBDEV(0): FBIOPUTCMAP: Invalid argument
[    15.333] (EE) FBDEV(0): FBIOPUTCMAP: Invalid argument
[    15.333] (EE) FBDEV(0): FBIOPUTCMAP: Invalid argument
[    15.333] (EE) FBDEV(0): FBIOPUTCMAP: Invalid argument
[    15.333] (EE) FBDEV(0): FBIOPUTCMAP: Invalid argument
[    15.333] (EE) FBDEV(0): FBIOPUTCMAP: Invalid argument
[    15.333] (EE) FBDEV(0): FBIOPUTCMAP: Invalid argument
[    15.333] (EE) FBDEV(0): FBIOPUTCMAP: Invalid argument
[    15.333] (EE) FBDEV(0): FBIOPUTCMAP: Invalid argument
[    15.333] (EE) FBDEV(0): FBIOPUTCMAP: Invalid argument
[    15.333] (EE) FBDEV(0): FBIOPUTCMAP: Invalid argument
[    15.333] (EE) FBDEV(0): FBIOPUTCMAP: Invalid argument
[    15.333] (EE) FBDEV(0): FBIOPUTCMAP: Invalid argument
[    15.333] (EE) FBDEV(0): FBIOPUTCMAP: Invalid argument
[    15.333] (EE) FBDEV(0): FBIOPUTCMAP: Invalid argument
[    15.333] (EE) FBDEV(0): FBIOPUTCMAP: Invalid argument
[    15.333] (EE) FBDEV(0): FBIOPUTCMAP: Invalid argument
[    15.333] (EE) FBDEV(0): FBIOPUTCMAP: Invalid argument
[    15.333] (EE) FBDEV(0): FBIOPUTCMAP: Invalid argument
[    15.334] (EE) FBDEV(0): FBIOPUTCMAP: Invalid argument
[    15.334] (EE) FBDEV(0): FBIOPUTCMAP: Invalid argument
[    15.334] (EE) FBDEV(0): FBIOPUTCMAP: Invalid argument
[    15.334] (EE) FBDEV(0): FBIOPUTCMAP: Invalid argument
[    15.334] (EE) FBDEV(0): FBIOPUTCMAP: Invalid argument
[    15.334] (EE) FBDEV(0): FBIOPUTCMAP: Invalid argument
[    15.334] (EE) FBDEV(0): FBIOPUTCMAP: Invalid argument
[    15.334] (EE) FBDEV(0): FBIOPUTCMAP: Invalid argument
[    15.334] (EE) FBDEV(0): FBIOPUTCMAP: Invalid argument
[    15.334] (EE) FBDEV(0): FBIOPUTCMAP: Invalid argument
[    15.334] (EE) FBDEV(0): FBIOPUTCMAP: Invalid argument
[    15.334] (EE) FBDEV(0): FBIOPUTCMAP: Invalid argument
[    15.334] (EE) FBDEV(0): FBIOPUTCMAP: Invalid argument
[    15.334] (EE) FBDEV(0): FBIOPUTCMAP: Invalid argument
[    15.334] (EE) FBDEV(0): FBIOPUTCMAP: Invalid argument
[    15.334] (EE) FBDEV(0): FBIOPUTCMAP: Invalid argument
[    15.334] (EE) FBDEV(0): FBIOPUTCMAP: Invalid argument
[    15.334] (EE) FBDEV(0): FBIOPUTCMAP: Invalid argument
[    15.334] (EE) FBDEV(0): FBIOPUTCMAP: Invalid argument
[    15.334] (EE) FBDEV(0): FBIOPUTCMAP: Invalid argument
[    15.334] (EE) FBDEV(0): FBIOPUTCMAP: Invalid argument
[    15.334] (EE) FBDEV(0): FBIOPUTCMAP: Invalid argument
[    15.334] (EE) FBDEV(0): FBIOPUTCMAP: Invalid argument
[    15.334] (EE) FBDEV(0): FBIOPUTCMAP: Invalid argument
[    15.334] (EE) FBDEV(0): FBIOPUTCMAP: Invalid argument
[    15.335] (EE) FBDEV(0): FBIOPUTCMAP: Invalid argument
[    15.335] (EE) FBDEV(0): FBIOPUTCMAP: Invalid argument
[    15.335] (EE) FBDEV(0): FBIOPUTCMAP: Invalid argument
[    15.335] (EE) FBDEV(0): FBIOPUTCMAP: Invalid argument
[    15.335] (EE) FBDEV(0): FBIOPUTCMAP: Invalid argument
[    15.335] (==) FBDEV(0): DPMS enabled
[    15.335] (II) Initializing extension Generic Event Extension
[    15.335] (II) Initializing extension SHAPE
[    15.335] (II) Initializing extension MIT-SHM
[    15.335] (II) Initializing extension XInputExtension
[    15.338] (II) Initializing extension XTEST
[    15.338] (II) Initializing extension BIG-REQUESTS
[    15.338] (II) Initializing extension SYNC
[    15.338] (II) Initializing extension XKEYBOARD
[    15.338] (II) Initializing extension XC-MISC
[    15.338] (II) Initializing extension XFIXES
[    15.338] (II) Initializing extension RENDER
[    15.338] (II) Initializing extension RANDR
[    15.338] (II) Initializing extension COMPOSITE
[    15.338] (II) Initializing extension DAMAGE
[    15.338] (II) Initializing extension MIT-SCREEN-SAVER
[    15.338] (II) Initializing extension DOUBLE-BUFFER
[    15.339] (II) Initializing extension DPMS
[    15.339] (II) Initializing extension Present
[    15.339] (II) Initializing extension DRI3
[    15.339] (II) Initializing extension X-Resource
[    15.339] (II) Initializing extension XVideo
[    15.339] (II) Initializing extension XVideo-MotionCompensation
[    15.339] (II) Initializing extension GLX
[    15.339] (II) Initializing extension XFree86-VidModeExtension
[    15.339] (II) Initializing extension XFree86-DGA
[    15.339] (II) Initializing extension XFree86-DRI
[    15.339] (II) Initializing extension DRI2
[    15.678] (II) config/udev: Adding input device gpio_buttons@0 (/dev/input/event0)
[    15.678] (II) No input driver specified, ignoring this device.
[    15.678] (II) This device may have been added with another device file.

root@am335x-evm:~#

here is what in xorg.conf

root@am335x-evm:~# cat /etc/X11/xorg.conf

Section "Module"

Load "extmod"

Load "dbe"

Load "glx"

Load "freetype"

Load "type1"

Load "record"

Load "dri"

EndSection

Section "Monitor"

Identifier "Builtin Default Monitor"

EndSection

Section "Device"

Identifier "Builtin Default fbdev Device 0"

Driver "fbdev"

EndSection

Section "Screen"

Identifier "Builtin Default fbdev Screen 0"

Device "Builtin Default fbdev Device 0"

Monitor "Builtin Default Monitor"

EndSection

Section "ServerLayout"

Identifier "Builtin Default Layout"

Screen "Builtin Default fbdev Screen 0"

EndSection

root@am335x-evm:~#

root@am335x-evm:~# cat /usr/share/X11/xorg.conf.d/

10-evdev.conf 10-quirks.conf 40-libinput.conf

root@am335x-evm:~# cat /usr/share/X11/xorg.conf.d/

cat: read error: Is a directory

Nikola

De : Zoran Stojsavljevic <[email protected]>
Envoyé : vendredi 12 avril 2019 06:05
À : Stanisavljevic <[email protected]>
Cc : Yocto Project <[email protected]>; Marc Ferland <[email protected]> Objet : Re: [yocto] yocto touchscreen

Hello Nikola,

I have here one non-important suggestion, for the starters:
Please, change kernel command line:

Quoted 1 line
[    0.000000] Kernel command line: console=ttyO0,115200 root=/dev/mmcblk0p2 rw

to: console=ttyS0,115200 root=/dev/mmcblk0p2 rw

According to:

Quoted 4 lines
[    0.000414] Console: colour dummy device 80x30
[    0.000440] WARNING: Your 'console=ttyO0' has been replaced by 'ttyS0'
[    0.000447] This ensures that you still see kernel messages. Please
[    0.000452] update your kernel commandline.

_______

Looking into:
(==) Log file: "/var/log/Xorg.0.log", Time: Thu Apr 11 15:41:31 2019 (==) Using config file: "/etc/X11/xorg.conf"
(==) Using system config directory "/usr/share/X11/xorg.conf.d"

Poky (Yocto Project Reference Distro) 2.6+snapshot am335x-evm /dev/ttyS0

am335x-evm login: The XKEYBOARD keymap compiler (xkbcomp) reports:

Quoted 7 lines

Warning: Unsupported high keycode 372 for name <I372> ignored

X11 cannot support keycodes above 255.

This warning only shows for the first high keycode.

Internal error:   Could not resolve keysym XF86MonBrightnessCycle

Errors from xkbcomp are not fatal to the X server

[   15.951736] random: dbus-daemon: uninitialized urandom read (12 bytes read, 67 bits of entropy available)

D-BUS per-session daemon address is: unix:abstract=/tmp/dbus-AntF8uRBJQ,guid=2087fb970fdb264af1e4e5315caf602b Size 1024x768 not found in available modes
Error: No calibratable devices found.
matchbox: Cant find a keycode for keysym 269025056
matchbox: ignoring key shortcut XF86Calendar=!$contacts
matchbox: Cant find a keycode for keysym 2809
matchbox: ignoring key shortcut telephone=!$dates
matchbox: Cant find a keycode for keysym 269025050
matchbox: ignoring key shortcut XF86Start=!matchbox-remote -desktop
_______

Seems, that mode you have chosen somehow with your touch screen

driver is NOT supported (messages in RED).

Please, could you choose something supported (800x600) and see if

this will work for you (just as proof of concept/ad-hoc test)?

Maybe your driver does not support 1024x768 mode (could be!)?

And, YES, calibration mode NOT to be performed could be FATAL!

_______

For now, it is enough suggestions for exploring and trying by you.

You should have attached to your @ log Xorg.0.log message again, for

us to inspect the messages and try to determine where the failure is.

Zoran

_______

On Thu, Apr 11, 2019 at 5:58 PM Stanisavljevic <[email protected] <mailto:[email protected]> > wrote:

Hello Zoran,

I tried to change X.org X Server version

To do this I used yocto warrior version.

When I boot the system, it’s written that x.org <http://x.org> X Server version is to 1.20.4

But I have the same problem as before, the touchscreen is completely locked and don’t react when I touch the screen.

Do you have an other idea where the problem is coming ?

Here I copy the boot log :

U-Boot SPL 2017.05-00001-g041a398 (May 02 2018 - 18:36:57)

Trying to boot from MMC1

reading uboot.env

reading u-boot.img

reading u-boot.img

reading u-boot.img

reading u-boot.img

U-Boot 2017.05-00001-g041a398 (May 02 2018 - 18:36:57 +0200)

CPU : AM335X-GP rev 2.1

Model: TI AM335x EVM-SK

DRAM: 256 MiB

NAND: 0 MiB

MMC: OMAP SD/MMC: 0, OMAP SD/MMC: 1

reading uboot.env

ERROR: No USB device found

at drivers/usb/gadget/ether.c:2709/usb_ether_init()

Net: CACHE: Misaligned operation at range [8df323c0, 8df32464]

Warning: ethernet@4a100000 using MAC address from ROM

eth0: ethernet@4a100000

Hit any key to stop autoboot: 0

reading zImage

3412752 bytes read in 251 ms (13 MiB/s)

reading dtb

39733 bytes read in 12 ms (3.2 MiB/s)

## Flattened Device Tree blob at 82000000

Booting using the fdt blob at 0x82000000

Loading Device Tree to 8df19000, end 8df25b34 ... OK

Starting kernel ...

[    0.000000] Booting Linux on physical CPU 0x0
[    0.000000] Initializing cgroup subsys cpu
[    0.000000] Initializing cgroup subsys cpuacct
[    0.000000] Linux version 4.4.19-ge581bb1cac (polycaptil@polycaptil-HP-Notebo                                                      ok) (gcc version 5.3.0 (GCC) ) #1 PREEMPT Thu May 24 11:42:17 CEST 2018
[    0.000000] CPU: ARMv7 Processor [413fc082] revision 2 (ARMv7), cr=10c5387d
[    0.000000] CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instructio                                                      n cache
[    0.000000] Machine model: TI AM335x EVM-SK
[    0.000000] cma: Reserved 48 MiB at 0x8a800000
[    0.000000] Memory policy: Data cache writeback
[    0.000000] CPU: All CPU(s) started in SVC mode.
[    0.000000] AM335X ES2.1 (sgx neon )
[    0.000000] Built 1 zonelists in Zone order, mobility grouping on.  Total pag                                                      es: 64960
[    0.000000] Kernel command line: console=ttyO0,115200 root=/dev/mmcblk0p2 rw
[    0.000000] PID hash table entries: 1024 (order: 0, 4096 bytes)
[    0.000000] Dentry cache hash table entries: 32768 (order: 5, 131072 bytes)
[    0.000000] Inode-cache hash table entries: 16384 (order: 4, 65536 bytes)
[    0.000000] Memory: 200444K/262144K available (6495K kernel code, 313K rwdata                                                      , 2368K rodata, 260K init, 265K bss, 12548K reserved, 49152K cma-reserved, 0K hi                                                      ghmem)
[    0.000000] Virtual kernel memory layout:
[    0.000000]     vector  : 0xffff0000 - 0xffff1000   (   4 kB)
[    0.000000]     fixmap  : 0xffc00000 - 0xfff00000   (3072 kB)
[    0.000000]     vmalloc : 0xd0800000 - 0xff800000   ( 752 MB)
[    0.000000]     lowmem  : 0xc0000000 - 0xd0000000   ( 256 MB)
[    0.000000]     pkmap   : 0xbfe00000 - 0xc0000000   (   2 MB)
[    0.000000]     modules : 0xbf000000 - 0xbfe00000   (  14 MB)
[    0.000000]       .text : 0xc0008000 - 0xc08b0034   (8865 kB)
[    0.000000]       .init : 0xc08b1000 - 0xc08f2000   ( 260 kB)
[    0.000000]       .data : 0xc08f2000 - 0xc09407f0   ( 314 kB)
[    0.000000]        .bss : 0xc09407f0 - 0xc0982d58   ( 266 kB)
[    0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=1, Nodes=1
[    0.000000] Preemptible hierarchical RCU implementation.
[    0.000000]  Build-time adjustment of leaf fanout to 32.
[    0.000000] NR_IRQS:16 nr_irqs:16 16
[    0.000000] IRQ: Found an INTC at 0xfa200000 (revision 5.0) with 128 interrup                                                      ts
[    0.000000] OMAP clockevent source: timer2 at 24000000 Hz
[    0.000013] sched_clock: 32 bits at 24MHz, resolution 41ns, wraps every 89478                                                      484971ns
[    0.000034] clocksource: timer1: mask: 0xffffffff max_cycles: 0xffffffff, max                                                      _idle_ns: 79635851949 ns
[    0.000046] OMAP clocksource: timer1 at 24000000 Hz
[    0.000221] clocksource_probe: no matching clocksources found
[    0.000414] Console: colour dummy device 80x30
[    0.000440] WARNING: Your 'console=ttyO0' has been replaced by 'ttyS0'
[    0.000447] This ensures that you still see kernel messages. Please
[    0.000452] update your kernel commandline.
[    0.000471] Calibrating delay loop... 795.44 BogoMIPS (lpj=3977216)
[    0.089060] pid_max: default: 32768 minimum: 301
[    0.089190] Mount-cache hash table entries: 1024 (order: 0, 4096 bytes)
[    0.089201] Mountpoint-cache hash table entries: 1024 (order: 0, 4096 bytes)
[    0.089924] Initializing cgroup subsys io
[    0.089956] Initializing cgroup subsys memory
[    0.089996] Initializing cgroup subsys devices
[    0.090011] Initializing cgroup subsys freezer
[    0.090026] Initializing cgroup subsys perf_event
[    0.090038] Initializing cgroup subsys pids
[    0.090068] CPU: Testing write buffer coherency: ok
[    0.090493] Setting up static identity map for 0x80008200 - 0x80008258
[    0.092679] devtmpfs: initialized
[    0.105439] VFP support v0.3: implementor 41 architecture 3 part 30 variant c                                                       rev 3
[    0.120521] omap_hwmod: debugss: _wait_target_disable failed
[    0.175644] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, ma                                                      x_idle_ns: 19112604462750000 ns
[    0.179890] pinctrl core: initialized pinctrl subsystem
[    0.181243] NET: Registered protocol family 16
[    0.183450] DMA: preallocated 256 KiB pool for atomic coherent allocations
[    0.209057] cpuidle: using governor ladder
[    0.239046] cpuidle: using governor menu
[    0.243690] OMAP GPIO hardware version 0.1
[    0.254398] hw-breakpoint: debug architecture 0x4 unsupported.
[    0.297651] edma 49000000.edma: TI EDMA DMA engine driver
[    0.298633] reg-fixed-voltage fixedregulator@2: could not find pctldev for no                                                      de /ocp/l4_wkup@44c00000/scm@210000/pinmux@800/pinmux_wl12xx_gpio, deferring pro                                                      be
[    0.302387] omap_i2c 44e0b000.i2c: could not find pctldev for node /ocp/l4_wk                                                      up@44c00000/scm@210000/pinmux@800/pinmux_i2c0_pins, deferring probe
[    0.302542] media: Linux media interface: v0.10
[    0.302605] Linux video capture interface: v2.00
[    0.302656] pps_core: LinuxPPS API ver. 1 registered
[    0.302664] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giome                                                      tti <[email protected] <mailto:[email protected]> >
[    0.302694] PTP clock support registered
[    0.302758] EDAC MC: Ver: 3.0.0
[    0.303971] omap-mailbox 480c8000.mailbox: omap mailbox rev 0x400
[    0.304334] Advanced Linux Sound Architecture Driver Initialized.
[    0.305513] clocksource: Switched to clocksource timer1
[    0.316808] NET: Registered protocol family 2
[    0.317626] TCP established hash table entries: 2048 (order: 1, 8192 bytes)
[    0.317665] TCP bind hash table entries: 2048 (order: 1, 8192 bytes)
[    0.317693] TCP: Hash tables configured (established 2048 bind 2048)
[    0.317782] UDP hash table entries: 256 (order: 0, 4096 bytes)
[    0.317803] UDP-Lite hash table entries: 256 (order: 0, 4096 bytes)
[    0.317960] NET: Registered protocol family 1
[    0.318387] RPC: Registered named UNIX socket transport module.
[    0.318402] RPC: Registered udp transport module.
[    0.318409] RPC: Registered tcp transport module.
[    0.318415] RPC: Registered tcp NFSv4.1 backchannel transport module.
[    0.319367] hw perfevents: enabled with armv7_cortex_a8 PMU driver, 5 counter                                                      s available
[    0.321439] futex hash table entries: 256 (order: -1, 3072 bytes)
[    0.329858] squashfs: version 4.0 (2009/01/31) Phillip Lougher
[    0.330796] NFS: Registering the id_resolver key type
[    0.330874] Key type id_resolver registered
[    0.330882] Key type id_legacy registered
[    0.330960] ntfs: driver 2.1.32 [Flags: R/O].
[    0.334733] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 2                                                      48)
[    0.334764] io scheduler noop registered
[    0.334778] io scheduler deadline registered
[    0.334936] io scheduler cfq registered (default)
[    0.336607] pinctrl-single 44e10800.pinmux: 142 pins at pa f9e10800 size 568
[    0.339467] backlight supply power not found, using dummy regulator
[    0.402551] Serial: 8250/16550 driver, 10 ports, IRQ sharing disabled
[    0.407008] 44e09000.serial: ttyS0 at MMIO 0x44e09000 (irq = 158, base_baud =                                                       3000000) is a 8250
[    1.017402] console [ttyS0] enabled
[    1.022241] 48022000.serial: ttyS1 at MMIO 0x48022000 (irq = 159, base_baud =                                                       3000000) is a 8250
[    1.032291] [drm] Initialized drm 1.1.0 20060810
[    1.039603] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
[    1.046388] [drm] No driver support for vblank timestamp query.
[    1.062150] Console: switching to colour frame buffer device 60x34
[    1.070379] tilcdc 4830e000.lcdc: fb0:  frame buffer device
[    1.105534] [drm] Initialized tilcdc 1.0.0 20121205 on minor 0
[    1.118627] loop: module loaded
[    1.124254] libphy: Fixed MDIO Bus: probed
[    1.185548] davinci_mdio 4a101000.mdio: davinci mdio revision 1.6
[    1.191692] davinci_mdio 4a101000.mdio: detected phy mask fffffffe
[    1.198739] libphy: 4a101000.mdio: probed
[    1.202836] davinci_mdio 4a101000.mdio: phy[0]: device 4a101000.mdio:00, driv                                                      er SMSC LAN8710/LAN8720
[    1.212833] cpsw 4a100000.ethernet: Detected MACID = a0:f6:fd:4c:a6:ba
[    1.220460] cpsw 4a100000.ethernet: cpsw: Detected MACID = c4:ed:ba:88:2a:92
[    1.229323] mousedev: PS/2 mouse device common for all mice
[    1.235803] i2c /dev entries driver
[    1.240462] cpuidle: enable-method property 'ti,am3352' found operations
[    1.248156] omap_hsmmc 48060000.mmc: Got CD GPIO
[    1.275714] pinctrl-single 44e10800.pinmux: bad data for mux pinmux_mmc2_pins
[    1.282895] pinctrl-single 44e10800.pinmux: no pins entries for pinmux_mmc2_p                                                      ins
[    1.317169] ledtrig-cpu: registered to indicate activity on CPUs
[    1.326062] NET: Registered protocol family 10
[    1.332076] sit: IPv6 over IPv4 tunneling driver
[    1.337708] NET: Registered protocol family 17
[    1.342503] Key type dns_resolver registered
[    1.347084] omap_voltage_late_init: Voltage driver support not added
[    1.407266] tps65910-rtc tps65910-rtc: rtc core: registered tps65910-rtc as r                                                      tc0
[    1.415401] omap_i2c 44e0b000.i2c: bus 0 rev0.11 at 400 kHz
[    1.421798] omap_hsmmc 48060000.mmc: Got CD GPIO
[    1.426953] vmmc: supplied by vbat
[    1.466351] pinctrl-single 44e10800.pinmux: bad data for mux pinmux_mmc2_pins
[    1.474750] pinctrl-single 44e10800.pinmux: no pins entries for pinmux_mmc2_p                                                      ins
[    1.513248] mmc0: host does not support reading read-only switch, assuming wr                                                      ite-enable
[    1.523416] mmc0: new high speed SDHC card at address 0001
[    1.529625] mmcblk0: mmc0:0001 AS 3.72 GiB
[    1.535990]  mmcblk0: p1 p2 p3
[    1.595934] vdd_mpu: supplied by vbat
[    1.602181] input: gpio_buttons@0 as /devices/platform/gpio_buttons@0/input/i                                                      nput0
[    1.618321] tps65910-rtc tps65910-rtc: setting system clock to 2019-04-11 15:                                                      41:17 UTC (1554997277)
[    1.639403] lis3_reg: disabling
[    1.655736] ALSA device list:
[    1.658725]   No soundcards found.
[    1.678270] EXT4-fs (mmcblk0p2): couldn't mount as ext3 due to feature incomp                                                      atibilities
[    1.696893] EXT4-fs (mmcblk0p2): couldn't mount as ext2 due to feature incomp                                                      atibilities
[    1.918459] EXT4-fs (mmcblk0p2): recovery complete
[    1.926817] EXT4-fs (mmcblk0p2): mounted filesystem with ordered data mode. O                                                      pts: (null)
[    1.945553] VFS: Mounted root (ext4 filesystem) on device 179:2.
[    1.951741] devtmpfs: mounted
[    1.955142] Freeing unused kernel memory: 260K (c08b1000 - c08f2000)
[    1.975513] This architecture does not have kernel memory protection.

INIT: version 2.88 booting

Starting udev

[    2.626491] udevd[78]: starting version 3.2.7
[    2.632958] random: udevd: uninitialized urandom read (16 bytes read, 19 bits                                                       of entropy available)
[    2.655617] random: udevd: uninitialized urandom read (16 bytes read, 19 bits                                                       of entropy available)
[    2.675821] random: udevd: uninitialized urandom read (16 bytes read, 20 bits                                                       of entropy available)
[    2.685085] random: udevd: uninitialized urandom read (16 bytes read, 20 bits                                                       of entropy available)
[    2.730297] udevd[78]: specified group 'kvm' unknown
[    2.798310] udevd[79]: starting eudev-3.2.7
[    3.062517] random: udevd: uninitialized urandom read (16 bytes read, 23 bits                                                       of entropy available)
[    3.095948] random: udevd: uninitialized urandom read (16 bytes read, 23 bits                                                       of entropy available)
[    3.128747] udevd[79]: specified group 'kvm' unknown
[    4.544886] EXT4-fs (mmcblk0p2): re-mounted. Opts: data=ordered
[    5.086681] random: dd: uninitialized urandom read (512 bytes read, 36 bits o                                                      f entropy available)

INIT: Entering runlevel: 5

Configuring network interfaces... [ 5.281526] net eth0: initializing cpsw ver sion 1.12 (0)

[    5.286963] net eth0: initialized cpsw ale version 1.4
[    5.292126] net eth0: ALE Table size 1024
[    5.299577] net eth0: phy found : id is : 0x7c0f1
[    5.312916] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready

udhcpc: started, v1.30.1

udhcpc: sending discover

udhcpc: sending discover

udhcpc: sending discover

udhcpc: no lease, forking to background

done.

Starting system message bus: [ 14.818015] random: dbus-daemon: uninitialized urandom read (12 bytes read, 53 bits of entropy available)

[   14.841904] random: dbus-daemon: uninitialized urandom read (12 bytes read, 53 bits of entropy available)

dbus.

Starting Xserver

Starting syslogd/klogd:

done

X.Org X Server 1.20.4

X Protocol Version 11, Revision 0

Build Operating System: Linux 4.15.0-45-generic x86_64

Current Operating System: Linux am335x-evm 4.4.19-ge581bb1cac #1 PREEMPT Thu May 24 11:42:17 CEST 2018 armv7l

Kernel command line: console=ttyO0,115200 root=/dev/mmcblk0p2 rw

Build Date: 10 April 2019 08:15:46PM

Current version of pixman: 0.38.0

Before reporting problems, check http://wiki.x.org

to make sure that you have the latest version.

Markers: (--) probed, (**) from config file, (==) default setting,

(++) from command line, (!!) notice, (II) informational,

(WW) warning, (EE) error, (NI) not implemented, (??) unknown.

(==) Log file: "/var/log/Xorg.0.log", Time: Thu Apr 11 15:41:31 2019

(==) Using config file: "/etc/X11/xorg.conf"

(==) Using system config directory "/usr/share/X11/xorg.conf.d"

Poky (Yocto Project Reference Distro) 2.6+snapshot am335x-evm /dev/ttyS0

am335x-evm login: The XKEYBOARD keymap compiler (xkbcomp) reports:

Quoted 7 lines

Warning: Unsupported high keycode 372 for name <I372> ignored

X11 cannot support keycodes above 255.

This warning only shows for the first high keycode.

Internal error:   Could not resolve keysym XF86MonBrightnessCycle

Errors from xkbcomp are not fatal to the X server

[   15.951736] random: dbus-daemon: uninitialized urandom read (12 bytes read, 67 bits of entropy available)

D-BUS per-session daemon address is: unix:abstract=/tmp/dbus-AntF8uRBJQ,guid=2087fb970fdb264af1e4e5315caf602b

Size 1024x768 not found in available modes

Error: No calibratable devices found.

matchbox: Cant find a keycode for keysym 269025056

matchbox: ignoring key shortcut XF86Calendar=!$contacts

matchbox: Cant find a keycode for keysym 2809

matchbox: ignoring key shortcut telephone=!$dates

matchbox: Cant find a keycode for keysym 269025050

matchbox: ignoring key shortcut XF86Start=!matchbox-remote -desktop

dbus-daemon[282]: Activating service name='org.a11y.atspi.Registry' requested by ':1.0' (uid=0 pid=278 comm="matchbox-terminal ")

dbus-daemon[282]: Successfully activated service 'org.a11y.atspi.Registry'

SpiRegistry daemon is running with well-known name - org.a11y.atspi.Registry

[   41.825592] random: nonblocking pool is initialized

Nikola.

De : Zoran Stojsavljevic <[email protected] <mailto:[email protected]> >
Envoyé : lundi 8 avril 2019 08:07
À : Stanisavljevic <[email protected] <mailto:[email protected]> >
Cc : Yocto Project <[email protected] <mailto:[email protected]> >; Marc Ferland <[email protected] <mailto:[email protected]> > Objet : Re: [yocto] yocto touchscreen

Hello Nikola,

I did some quick analysis of your kernel boot traces, and there are the following observations made:

[1] The kernel used is:
Linux version 4.4.19-ge581bb1cac (polycaptil@polycaptil-HP-Notebook) ?!

In my case (I built YOCTO thud for BBB NOT using X11, only serial console):
Linux version 4.19.7-jumpnow (oe-user@oe-host) (gcc version 8.2.0 (GCC))

I could not explain polycaptil@polycaptil-HP-Notebook, maybe you do it for such kind of platform... The kernel used is too old, for my taste, you did not replaced it, if you built YOCTO thud!

[2] The kernel command line:

[    0.000000] Kernel command line: console=ttyO0,115200 root=/dev/mmcblk0p2 rw

Shows that you use EMMC as holder for / tree, all good.

[3] The concern about your console: console=ttyO0,115200 Is addressed here:

[    0.000441] WARNING: Your 'console=ttyO0' has been replaced by 'ttyS0'

Later followed by:

[    0.402495] Serial: 8250/16550 driver, 10 ports, IRQ sharing disabled
[    0.406968] 44e09000.serial: ttyS0 at MMIO 0x44e09000 (irq = 158, base_baud = 3000000) is a 8250
[    1.017361] console [ttyS0] enabled
[    1.022188] 48022000.serial: ttyS1 at MMIO 0x48022000 (irq = 159, base_baud = 3000000) is a 8250

So, not at all worries about the console!

[4] The following traces are worrying me very much:

Starting Xserver
Starting syslogd/klogd:
done
X.Org X Server 1.20.1
X Protocol Version 11, Revision 0
Build Operating System: Linux 4.15.0-45-generic x86_64
Current Operating System: Linux am335x-evm 4.4.19-ge581bb1cac #1 PREEMPT Thu May 24 11:42:17 CEST 2018 armv7l Kernel command line: console=ttyO0,115200 root=/dev/mmcblk0p2 rw
Build Date: 02 April 2019 07:35:10PM

As Marc wrote earlier:

Quoted 1 line

Looks like: https://bugzilla.redhat.com/show_bug.cgi?id=1650634

So, as I stated before: you should have in your build:

X.Org Server 1.20.3! This is the main problem, seems!

Zoran

_______

On Fri, Apr 5, 2019 at 3:35 PM Stanisavljevic <[email protected] <mailto:[email protected]> > wrote:

Hello Zoran,

I keep you in touch about the migration from sumo to thud to solve my problem of locked touchscreen.

I migrated from sumo to thud version, but nothing changed, the problem is the same, and I have same messages on boot as sumo version.

I looked that the x server have a configuration kernel command line (if I correctly understood), here is what is written :

Kernel command line: console=ttyO0,115200 root=/dev/mmcblk0p2 rw

But the kernel command line of poky is different, here is what is configured for poky kernel command line :

Poky (Yocto Project Reference Distro) 2.6.1 am335x-evm /dev/ttyS0

For the xserver it is ttyO0 and for poky it is ttyS0, maybe there is something wrong here which do problem for the touchscreen.

I put below (at end of this mail )the text which appear during the boot.

I think xorg-x11-server package 1.20.3 was not the problem in the previous yocto version (sumo)…

Best regards

Nikola

Here is the text that appear during the boot :

root@am335x-evm:~# CCCCCCCCCCCCCCCCCCCCCCCC

U-Boot SPL 2017.05-00001-g041a398 (May 02 2018 - 18:36:57)

Trying to boot from MMC1

reading uboot.env

reading u-boot.img

reading u-boot.img

reading u-boot.img

reading u-boot.img

U-Boot 2017.05-00001-g041a398 (May 02 2018 - 18:36:57 +0200)

CPU : AM335X-GP rev 2.1

Model: TI AM335x EVM-SK

DRAM: 256 MiB

NAND: 0 MiB

MMC: OMAP SD/MMC: 0, OMAP SD/MMC: 1

reading uboot.env

ERROR: No USB device found

at drivers/usb/gadget/ether.c:2709/usb_ether_init()

Net: CACHE: Misaligned operation at range [8df323c0, 8df32464]

Warning: ethernet@4a100000 using MAC address from ROM

eth0: ethernet@4a100000

Hit any key to stop autoboot: 0

reading zImage

3412752 bytes read in 252 ms (12.9 MiB/s)

reading dtb

39733 bytes read in 12 ms (3.2 MiB/s)

## Flattened Device Tree blob at 82000000

Booting using the fdt blob at 0x82000000

Loading Device Tree to 8df19000, end 8df25b34 ... OK

Starting kernel ...

[    0.000000] Booting Linux on physical CPU 0x0
[    0.000000] Initializing cgroup subsys cpu
[    0.000000] Initializing cgroup subsys cpuacct
[    0.000000] Linux version 4.4.19-ge581bb1cac (polycaptil@polycaptil-HP-Notebook) (gcc version 5.3.0 (GCC) ) #1 PREEMPT Thu May 24 11:42:17 CEST 2018
[    0.000000] CPU: ARMv7 Processor [413fc082] revision 2 (ARMv7), cr=10c5387d
[    0.000000] CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instruction cache
[    0.000000] Machine model: TI AM335x EVM-SK
[    0.000000] cma: Reserved 48 MiB at 0x8a800000
[    0.000000] Memory policy: Data cache writeback
[    0.000000] CPU: All CPU(s) started in SVC mode.
[    0.000000] AM335X ES2.1 (sgx neon )
[    0.000000] Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 64960
[    0.000000] Kernel command line: console=ttyO0,115200 root=/dev/mmcblk0p2 rw
[    0.000000] PID hash table entries: 1024 (order: 0, 4096 bytes)
[    0.000000] Dentry cache hash table entries: 32768 (order: 5, 131072 bytes)
[    0.000000] Inode-cache hash table entries: 16384 (order: 4, 65536 bytes)
[    0.000000] Memory: 200444K/262144K available (6495K kernel code, 313K rwdata, 2368K rodata, 260K init, 265K bss, 12548K reserved, 49152K cma-reserved, 0K highmem)
[    0.000000] Virtual kernel memory layout:
[    0.000000]     vector  : 0xffff0000 - 0xffff1000   (   4 kB)
[    0.000000]     fixmap  : 0xffc00000 - 0xfff00000   (3072 kB)
[    0.000000]     vmalloc : 0xd0800000 - 0xff800000   ( 752 MB)
[    0.000000]     lowmem  : 0xc0000000 - 0xd0000000   ( 256 MB)
[    0.000000]     pkmap   : 0xbfe00000 - 0xc0000000   (   2 MB)
[    0.000000]     modules : 0xbf000000 - 0xbfe00000   (  14 MB)
[    0.000000]       .text : 0xc0008000 - 0xc08b0034   (8865 kB)
[    0.000000]       .init : 0xc08b1000 - 0xc08f2000   ( 260 kB)
[    0.000000]       .data : 0xc08f2000 - 0xc09407f0   ( 314 kB)
[    0.000000]        .bss : 0xc09407f0 - 0xc0982d58   ( 266 kB)
[    0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=1, Nodes=1
[    0.000000] Preemptible hierarchical RCU implementation.
[    0.000000]  Build-time adjustment of leaf fanout to 32.
[    0.000000] NR_IRQS:16 nr_irqs:16 16
[    0.000000] IRQ: Found an INTC at 0xfa200000 (revision 5.0) with 128 interrupts
[    0.000000] OMAP clockevent source: timer2 at 24000000 Hz
[    0.000016] sched_clock: 32 bits at 24MHz, resolution 41ns, wraps every 89478484971ns
[    0.000036] clocksource: timer1: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 79635851949 ns
[    0.000047] OMAP clocksource: timer1 at 24000000 Hz
[    0.000222] clocksource_probe: no matching clocksources found
[    0.000415] Console: colour dummy device 80x30
[    0.000441] WARNING: Your 'console=ttyO0' has been replaced by 'ttyS0'
[    0.000447] This ensures that you still see kernel messages. Please
[    0.000453] update your kernel commandline.
[    0.000473] Calibrating delay loop... 795.44 BogoMIPS (lpj=3977216)
[    0.089067] pid_max: default: 32768 minimum: 301
[    0.089198] Mount-cache hash table entries: 1024 (order: 0, 4096 bytes)
[    0.089210] Mountpoint-cache hash table entries: 1024 (order: 0, 4096 bytes)
[    0.089932] Initializing cgroup subsys io
[    0.089965] Initializing cgroup subsys memory
[    0.090003] Initializing cgroup subsys devices
[    0.090020] Initializing cgroup subsys freezer
[    0.090035] Initializing cgroup subsys perf_event
[    0.090047] Initializing cgroup subsys pids
[    0.090074] CPU: Testing write buffer coherency: ok
[    0.090499] Setting up static identity map for 0x80008200 - 0x80008258
[    0.092669] devtmpfs: initialized
[    0.105440] VFP support v0.3: implementor 41 architecture 3 part 30 variant c rev 3
[    0.120496] omap_hwmod: debugss: _wait_target_disable failed
[    0.175552] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns
[    0.179889] pinctrl core: initialized pinctrl subsystem
[    0.181246] NET: Registered protocol family 16
[    0.183446] DMA: preallocated 256 KiB pool for atomic coherent allocations
[    0.209067] cpuidle: using governor ladder
[    0.239055] cpuidle: using governor menu
[    0.243662] OMAP GPIO hardware version 0.1
[    0.254349] hw-breakpoint: debug architecture 0x4 unsupported.
[    0.297650] edma 49000000.edma: TI EDMA DMA engine driver
[    0.298630] reg-fixed-voltage fixedregulator@2: could not find pctldev for node /ocp/l4_wkup@44c00000/scm@210000/pinmux@800/pinmux_wl12xx_gpio, deferring probe
[    0.302384] omap_i2c 44e0b000.i2c: could not find pctldev for node /ocp/l4_wkup@44c00000/scm@210000/pinmux@800/pinmux_i2c0_pins, deferring probe
[    0.302543] media: Linux media interface: v0.10
[    0.302609] Linux video capture interface: v2.00
[    0.302660] pps_core: LinuxPPS API ver. 1 registered
[    0.302668] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <[email protected] <mailto:[email protected]> >
[    0.302699] PTP clock support registered
[    0.302764] EDAC MC: Ver: 3.0.0
[    0.303981] omap-mailbox 480c8000.mailbox: omap mailbox rev 0x400
[    0.304343] Advanced Linux Sound Architecture Driver Initialized.
[    0.305508] clocksource: Switched to clocksource timer1
[    0.316757] NET: Registered protocol family 2
[    0.317569] TCP established hash table entries: 2048 (order: 1, 8192 bytes)
[    0.317608] TCP bind hash table entries: 2048 (order: 1, 8192 bytes)
[    0.317636] TCP: Hash tables configured (established 2048 bind 2048)
[    0.317718] UDP hash table entries: 256 (order: 0, 4096 bytes)
[    0.317738] UDP-Lite hash table entries: 256 (order: 0, 4096 bytes)
[    0.317898] NET: Registered protocol family 1
[    0.318323] RPC: Registered named UNIX socket transport module.
[    0.318337] RPC: Registered udp transport module.
[    0.318344] RPC: Registered tcp transport module.
[    0.318350] RPC: Registered tcp NFSv4.1 backchannel transport module.
[    0.319303] hw perfevents: enabled with armv7_cortex_a8 PMU driver, 5 counters available
[    0.321370] futex hash table entries: 256 (order: -1, 3072 bytes)
[    0.329774] squashfs: version 4.0 (2009/01/31) Phillip Lougher
[    0.330714] NFS: Registering the id_resolver key type
[    0.330792] Key type id_resolver registered
[    0.330801] Key type id_legacy registered
[    0.330881] ntfs: driver 2.1.32 [Flags: R/O].
[    0.334651] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 248)
[    0.334684] io scheduler noop registered
[    0.334698] io scheduler deadline registered
[    0.334855] io scheduler cfq registered (default)
[    0.336527] pinctrl-single 44e10800.pinmux: 142 pins at pa f9e10800 size 568
[    0.339377] backlight supply power not found, using dummy regulator
[    0.402495] Serial: 8250/16550 driver, 10 ports, IRQ sharing disabled
[    0.406968] 44e09000.serial: ttyS0 at MMIO 0x44e09000 (irq = 158, base_baud = 3000000) is a 8250
[    1.017361] console [ttyS0] enabled
[    1.022188] 48022000.serial: ttyS1 at MMIO 0x48022000 (irq = 159, base_baud = 3000000) is a 8250
[    1.032233] [drm] Initialized drm 1.1.0 20060810
[    1.039551] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
[    1.046337] [drm] No driver support for vblank timestamp query.
[    1.062083] Console: switching to colour frame buffer device 60x34
[    1.070316] tilcdc 4830e000.lcdc: fb0:  frame buffer device
[    1.105532] [drm] Initialized tilcdc 1.0.0 20121205 on minor 0
[    1.118602] loop: module loaded
[    1.124221] libphy: Fixed MDIO Bus: probed
[    1.185547] davinci_mdio 4a101000.mdio: davinci mdio revision 1.6
[    1.191690] davinci_mdio 4a101000.mdio: detected phy mask fffffffe
[    1.198754] libphy: 4a101000.mdio: probed
[    1.202851] davinci_mdio 4a101000.mdio: phy[0]: device 4a101000.mdio:00, driver SMSC LAN8710/LAN8720
[    1.212830] cpsw 4a100000.ethernet: Detected MACID = a0:f6:fd:4c:a6:ba
[    1.220461] cpsw 4a100000.ethernet: cpsw: Detected MACID = c4:ed:ba:88:2a:92
[    1.229313] mousedev: PS/2 mouse device common for all mice
[    1.235792] i2c /dev entries driver
[    1.240448] cpuidle: enable-method property 'ti,am3352' found operations
[    1.248143] omap_hsmmc 48060000.mmc: Got CD GPIO
[    1.275713] pinctrl-single 44e10800.pinmux: bad data for mux pinmux_mmc2_pins
[    1.282895] pinctrl-single 44e10800.pinmux: no pins entries for pinmux_mmc2_pins
[    1.317167] ledtrig-cpu: registered to indicate activity on CPUs
[    1.326065] NET: Registered protocol family 10
[    1.332086] sit: IPv6 over IPv4 tunneling driver
[    1.337713] NET: Registered protocol family 17
[    1.342528] Key type dns_resolver registered
[    1.347114] omap_voltage_late_init: Voltage driver support not added
[    1.407191] tps65910-rtc tps65910-rtc: rtc core: registered tps65910-rtc as rtc0
[    1.415327] omap_i2c 44e0b000.i2c: bus 0 rev0.11 at 400 kHz
[    1.421710] omap_hsmmc 48060000.mmc: Got CD GPIO
[    1.426857] vmmc: supplied by vbat
[    1.466348] pinctrl-single 44e10800.pinmux: bad data for mux pinmux_mmc2_pins
[    1.474748] pinctrl-single 44e10800.pinmux: no pins entries for pinmux_mmc2_pins
[    1.513242] mmc0: host does not support reading read-only switch, assuming write-enable
[    1.523406] mmc0: new high speed SDHC card at address 0001
[    1.529619] mmcblk0: mmc0:0001 AS 3.72 GiB
[    1.535970]  mmcblk0: p1 p2 p3
[    1.595927] vdd_mpu: supplied by vbat
[    1.602118] input: gpio_buttons@0 as /devices/platform/gpio_buttons@0/input/input0
[    1.618310] tps65910-rtc tps65910-rtc: setting system clock to 2019-04-03 08:25:12 UTC (1554279912)
[    1.639397] lis3_reg: disabling
[    1.655734] ALSA device list:
[    1.658723]   No soundcards found.
[    1.678283] EXT4-fs (mmcblk0p2): couldn't mount as ext3 due to feature incompatibilities
[    1.696903] EXT4-fs (mmcblk0p2): couldn't mount as ext2 due to feature incompatibilities
[    1.792693] EXT4-fs (mmcblk0p2): recovery complete
[    1.807446] EXT4-fs (mmcblk0p2): mounted filesystem with ordered data mode. Opts: (null)
[    1.821463] VFS: Mounted root (ext4 filesystem) on device 179:2.
[    1.835669] devtmpfs: mounted
[    1.839073] Freeing unused kernel memory: 260K (c08b1000 - c08f2000)
[    1.851956] This architecture does not have kernel memory protection.

INIT: version 2.88 booting

Starting udev

[    2.513624] udevd[78]: starting version 3.2.5
[    2.527632] random: udevd: uninitialized urandom read (16 bytes read, 18 bits of entropy available)
[    2.546992] random: udevd: uninitialized urandom read (16 bytes read, 18 bits of entropy available)
[    2.566829] random: udevd: uninitialized urandom read (16 bytes read, 18 bits of entropy available)
[    2.585755] random: udevd: uninitialized urandom read (16 bytes read, 18 bits of entropy available)
[    2.668211] udevd[79]: starting eudev-3.2.5
[    3.036159] random: udevd: uninitialized urandom read (16 bytes read, 21 bits of entropy available)
[    3.061761] random: udevd: uninitialized urandom read (16 bytes read, 21 bits of entropy available)
[    4.494682] EXT4-fs (mmcblk0p2): re-mounted. Opts: data=ordered
[    5.052098] random: dd: uninitialized urandom read (512 bytes read, 34 bits of entropy available)

INIT: Entering runlevel: 5

Configuring network interfaces... [ 5.254308] net eth0: initializing cpsw version 1.12 (0)

[    5.259812] net eth0: initialized cpsw ale version 1.4
[    5.264976] net eth0: ALE Table size 1024
[    5.272411] net eth0: phy found : id is : 0x7c0f1
[    5.285702] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready

udhcpc: started, v1.29.2

udhcpc: sending discover

udhcpc: sending discover

udhcpc: sending discover

udhcpc: no lease, forking to background

done.

Starting system message bus: [ 14.793334] random: dbus-daemon: uninitialized urandom read (12 bytes read, 51 bits of entropy available)

[   14.831748] random: dbus-daemon: uninitialized urandom read (12 bytes read, 52 bits of entropy available)

dbus.

Starting Xserver

Starting syslogd/klogd:

done

X.Org X Server 1.20.1

X Protocol Version 11, Revision 0

Build Operating System: Linux 4.15.0-45-generic x86_64

Current Operating System: Linux am335x-evm 4.4.19-ge581bb1cac #1 PREEMPT Thu May 24 11:42:17 CEST 2018 armv7l

Kernel command line: console=ttyO0,115200 root=/dev/mmcblk0p2 rw

Build Date: 02 April 2019 07:35:10PM

Current version of pixman: 0.34.0

Before reporting problems, check http://wiki.x.org

to make sure that you have the latest version.

Markers: (--) probed, (**) from config file, (==) default setting,

(++) from command line, (!!) notice, (II) informational,

(WW) warning, (EE) error, (NI) not implemented, (??) unknown.

(==) Log file: "/var/log/Xorg.0.log", Time: Wed Apr 3 08:25:25 2019

(==) Using config file: "/etc/X11/xorg.conf"

(==) Using system config directory "/usr/share/X11/xorg.conf.d"

Poky (Yocto Project Reference Distro) 2.6.1 am335x-evm /dev/ttyS0

am335x-evm login: The XKEYBOARD keymap compiler (xkbcomp) reports:

Quoted 5 lines

Warning: Unsupported high keycode 372 for name <I372> ignored

X11 cannot support keycodes above 255.

This warning only shows for the first high keycode.

Errors from xkbcomp are not fatal to the X server

[   15.888959] random: dbus-daemon: uninitialized urandom read (12 bytes read, 65 bits of entropy available)

D-BUS per-session daemon address is: unix:abstract=/tmp/dbus-JjEW6Wgjtx,guid=87af020e5c6f1a7e21d449e55ca46df5

Size 1024x768 not found in available modes

Error: No calibratable devices found.

matchbox: Cant find a keycode for keysym 269025056

matchbox: ignoring key shortcut XF86Calendar=!$contacts

matchbox: Cant find a keycode for keysym 2809

matchbox: ignoring key shortcut telephone=!$dates

matchbox: Cant find a keycode for keysym 269025050

matchbox: ignoring key shortcut XF86Start=!matchbox-remote -desktop

Failed to launch bus: Failed to execute child process ?/usr/bin? (Permission denied)

(matchbox-terminal:274): dbind-WARNING **: 08:25:27.404: Error retrieving accessibility bus address: org.a11y.Bus.Error: Failed to execute child process ?/usr/bin? (Permission denied)

[   43.718127] random: nonblocking pool is initialized

De : Stanisavljevic <[email protected] <mailto:[email protected]> >
Envoyé : lundi 18 février 2019 15:27
À : 'Zoran Stojsavljevic' <[email protected] <mailto:[email protected]> >
Cc : 'Yocto Project' <[email protected] <mailto:[email protected]> >; 'Marc Ferland' <[email protected] <mailto:[email protected]> > Objet : RE: [yocto] yocto touchscreen

Hello Zoran

I will try these 2 ways.

Of course, the second way is the easiest, but I will try also the first way only to see if it is possible.

I will keep you in touch if the first way can work.

Best regards,

Nikola

De : Zoran Stojsavljevic < <mailto:[email protected]> [email protected]>
Envoyé : lundi 18 février 2019 15:21
À : Stanisavljevic < <mailto:[email protected]> [email protected]>
Cc : Yocto Project < <mailto:[email protected]> [email protected]>; Marc Ferland < <mailto:[email protected]> [email protected]> Objet : Re: [yocto] yocto touchscreen

Hello Nikola,

Two things, which immediately came to my mind:

[1 - Harder way] Either to change xorg-x11-server in sumo to match at least xorg-x11-server 1.20.3;

(harder way, since few people know exact dependencies among various GFX packages, and what

and how many packages need to be also changed to make xorg-x11-server 1.20.3 to work)

[2 - Easier Way] Either to migrate YOCTO to Thud, where the correct xorg-x11-server package 1.20.3

is already fixed and set!

(easier way, since exact dependencies among various GFX packages are already set for 1.20.3)

Best Regards,

Zoran

_______

On Mon, Feb 18, 2019 at 2:48 PM Stanisavljevic < <mailto:[email protected]> [email protected]> wrote:

Thank you Zoran for trying to help me.
I tried to resolve the problem, but I didn’t succeed yet, I think I will to continue, and If after some time I find nothing, I’m going to migrate to the thud version.

I will maybe try to use Bugzilla

Nikola

De : Zoran Stojsavljevic < <mailto:[email protected]> [email protected]>
Envoyé : mardi 5 février 2019 19:28
À : Stanisavljevic < <mailto:[email protected]> [email protected]>
Cc : Yocto Project < <mailto:[email protected]> [email protected]>; <mailto:[email protected]> [email protected] Objet : Re: [yocto] yocto touchscreen

Hello Nikola,

Let us try to cut to the chase!

After reading what Marc Ferland says/writes, and looking into the following:
<https://bugzilla.redhat.com/show_bug.cgi?id=1650634> https://bugzilla.redhat.com/show_bug.cgi?id=1650634

I have spotted the following:

Pat Riehecky 2018-11-20 14:28:22 UTC

the bug remains with the elrepo kernels:
kernel-ml-4.19.2-1.el7.elrepo.x86_64
kernel-lt-4.4.163-1.el7.elrepo.x86_64

I never had this problem since I do not use Xorg (GFX), rather I only

use serial console from VBox VM from my BBB (pass-through).

Thus, my suggestion for you, to skip the whole mess is to rebuild your

distro in the light of YOCTO Project 2.6.1 (thud 20.0.0.1).

My best guess (then you'll inherit YOCTO kernel 4.20.x with fixed Xorg - X11).

I am using Fedora 29 on my laptop. Also from the bugzilla:

Pat Riehecky 2018-11-20 15:46:11 UTC

Bug resolved by rebuilding xorg-x11-server-1.20.3-1.fc29 [1] for 7.6.

With this in mind it appears to be an Xorg server bug rather than fbdev.

From my HP EliteBook 840 G1 Fedora 29, Xorg.0.log - February 5th, 2019.,

I have the following:

[    26.955] Kernel command line: BOOT_IMAGE=/vmlinuz-4.20.6-200.fc29.x86_64

root=/dev/mapper/fedora-root ro <http://rd.lvm.lv> rd.lvm.lv=fedora/root <http://rd.lvm.lv> rd.lvm.lv=fedora/swap rhgb

quiet LANG=en_US.UTF-8

[    26.955] Build Date: 11 January 2019  12:47:38PM
[    26.955] Build ID: xorg-x11-server 1.20.3-3.fc29
[    26.955] Current version of pixman: 0.34.0

Best Regards,
Zoran
_______

Quoted 696 lines · On Tue, Feb 5, 2019 at 2:49 PM Zoran Stojsavljevic <…

Hello Nikola,

Quoted 5 lines

I created a kernel recipe with a bbappend file, and, I added the same defconfig that I used for krogoth version. The bbappend for kernel recipe concern meta-ti layer. I didn't edited defconfig file in other layers which contain a kernel recipe.

It could be some problem that Sumo does not take your bbappend file into the consideration as placed.

It could be something else, as well.

I have the same issue with my defconfig file for my Thud Beagle Bone Black (BBB) standard board. Every time I recompile my YOCTO for it for different releases, I need to import my specific defconfig. But I use complete different repos for my standard Beagle Bone Black than YOCTO BBB Poky reference distro.

Here is what I use in Thud (my bblayers.conf):

POKY_BBLAYERS_CONF_VERSION = "2"
BBPATH = "${TOPDIR}"
BBFILES ?= ""

BBLAYERS ?= " \
    /home/user/projects2/beaglebone-black/yocto-thud/meta-bbb \
    /home/user/projects2/beaglebone-black/yocto-thud/meta-openembedded/meta-networking \
    /home/user/projects2/beaglebone-black/yocto-thud/meta-openembedded/meta-oe \
    /home/user/projects2/beaglebone-black/yocto-thud/meta-openembedded/meta-python \
    /home/user/projects2/beaglebone-black/yocto-thud/meta-qt5 \
    /home/user/projects2/beaglebone-black/yocto-thud/poky/meta \
    /home/user/projects2/beaglebone-black/yocto-thud/poky/meta-poky"

There, I replace defconfig in this layer: /home/user/projects2/beaglebone-black/yocto-thud/meta-bbb with my own defconfig.

In the directory:
/home/user/projects2/beaglebone-black/yocto-thud/meta-bbb/recipes-kernel/linux/linux-stable-4.19/beaglebone

If you use only Poky repository, then you need to read the following paragraph (how to use your defconfig with Poky):

[2.3.3. Changing the Configuration] YOCTO Project Linux Development Manual
<https://www.yoctoproject.org/docs/2.5/kernel-dev/kernel-dev.html#using-an-in-tree-defconfig-file> https://www.yoctoproject.org/docs/2.5/kernel-dev/kernel-dev.html#using-an-in-tree-defconfig-file
2.3.3. Changing the Configuration

I hope this will help. Please, keep us posted!

Zoran
_______

Quoted 642 lines · On Tue, Feb 5, 2019 at 10:54 AM Stanisavljevic <…

Hy Zoran

Thank's to take time to answer

I created a kernel recipe with a bbappend file, and, I added the same defconfig that I used for krogoth version. The bbappend for kernel recipe concern meta-ti layer.
I didn't edited defconfig file in other layers which contain a kernel recipe.

I think it's a problem which concern the screen resolution, screen frequency and adc touchscreen. Something is different between the krogoth and sumo version, but I didn't find what is changed...

Xrandr show that problem is maybe around the screen resolution.
It's show the next message : "Size 1024x768 not found in available modes"
Maybe it was changed between krogoth and sumo version...but I don't know where it is indicated if sources files...

What do you think ? problem can be around the screen resolution, screen frequency and adc touchscreen ?

Nikola

-----Message d'origine-----
De : Zoran Stojsavljevic < <mailto:[email protected]> [email protected]> Envoyé : lundi 4 février 2019 17:08
À : Stanisavljevic < <mailto:[email protected]> [email protected]> Cc : Yocto Project < <mailto:[email protected]> [email protected]> Objet : Re: [yocto] yocto touchscreen

Quoted 5 lines

I built a first version of this os with version krogoth and it works fine.

Now I build a second version of this os with version sumo and the touch screen works fine during boot process but when kernel is loaded, touchscreen freeze / lock and impossible to use it.

Did you compare Krogoth kernel defconfig with Sumo kernel defconfig?

May there are some mismatches in drivers' setup between these two?

Zoran
_______

Quoted 600 lines · On Mon, Feb 4, 2019 at 12:24 PM Stanisavljevic <…

Hy Team,

I have a problem

I buid a custom os for AM335x processor and I used yocto to do it.

I build a first version of this os with version krogoth and it work fine.

Now I build a second version of this os with version sumo and the touchscreen work fine during boot process but when kernel is loaded, touchscreen freeze / lock and impossible to use it.

The terminal is printed on the touchscreen but the screen is locked, impossible to write a command or to move the mouse to select, ….

Here is the log of boot to the user session (log got with serial communication between PC and board) :

U-Boot SPL 2017.05-00001-g041a398 (May 02 2018 - 18:36:57)

Trying to boot from MMC1

reading uboot.env

reading u-boot.img

reading u-boot.img

reading u-boot.img

reading u-boot.img

U-Boot 2017.05-00001-g041a398 (May 02 2018 - 18:36:57 +0200)

CPU : AM335X-GP rev 2.1

Model: TI AM335x EVM-SK

DRAM: 256 MiB

NAND: 0 MiB

MMC: OMAP SD/MMC: 0, OMAP SD/MMC: 1

reading uboot.env

ERROR: No USB device found

at drivers/usb/gadget/ether.c:2709/usb_ether_init()

Net: CACHE: Misaligned operation at range [8df323c0, 8df32464]

Warning: ethernet@4a100000 using MAC address from ROM

eth0: ethernet@4a100000

Hit any key to stop autoboot: 0

reading zImage

3412752 bytes read in 251 ms (13 MiB/s)

reading dtb

39733 bytes read in 12 ms (3.2 MiB/s)

## Flattened Device Tree blob at 82000000

Booting using the fdt blob at 0x82000000

Loading Device Tree to 8df19000, end 8df25b34 ... OK

Starting kernel ...

[    0.000000] Booting Linux on physical CPU 0x0
[    0.000000] Initializing cgroup subsys cpu
[    0.000000] Initializing cgroup subsys cpuacct
[    0.000000] Linux version 4.4.19-ge581bb1cac (polycaptil@polycaptil-HP-Notebook) (gcc version 5.3.0 (GCC) ) #1 PREEMPT Thu May 24 11:42:17 CEST 2018
[    0.000000] CPU: ARMv7 Processor [413fc082] revision 2 (ARMv7), cr=10c5387d
[    0.000000] CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instruction cache
[    0.000000] Machine model: TI AM335x EVM-SK
[    0.000000] cma: Reserved 48 MiB at 0x8a800000
[    0.000000] Memory policy: Data cache writeback
[    0.000000] CPU: All CPU(s) started in SVC mode.
[    0.000000] AM335X ES2.1 (sgx neon )
[    0.000000] Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 64960
[    0.000000] Kernel command line: console=ttyO0,115200 root=/dev/mmcblk0p3 rw
[    0.000000] PID hash table entries: 1024 (order: 0, 4096 bytes)
[    0.000000] Dentry cache hash table entries: 32768 (order: 5, 131072 bytes)
[    0.000000] Inode-cache hash table entries: 16384 (order: 4, 65536 bytes)
[    0.000000] Memory: 200444K/262144K available (6495K kernel code, 313K rwdata, 2368K rodata, 260K init, 265K bss, 12548K reserved, 49152K cma-reserved, 0K highmem)
[    0.000000] Virtual kernel memory layout:
[    0.000000]     vector  : 0xffff0000 - 0xffff1000   (   4 kB)
[    0.000000]     fixmap  : 0xffc00000 - 0xfff00000   (3072 kB)
[    0.000000]     vmalloc : 0xd0800000 - 0xff800000   ( 752 MB)
[    0.000000]     lowmem  : 0xc0000000 - 0xd0000000   ( 256 MB)
[    0.000000]     pkmap   : 0xbfe00000 - 0xc0000000   (   2 MB)
[    0.000000]     modules : 0xbf000000 - 0xbfe00000   (  14 MB)
[    0.000000]       .text : 0xc0008000 - 0xc08b0034   (8865 kB)
[    0.000000]       .init : 0xc08b1000 - 0xc08f2000   ( 260 kB)
[    0.000000]       .data : 0xc08f2000 - 0xc09407f0   ( 314 kB)
[    0.000000]        .bss : 0xc09407f0 - 0xc0982d58   ( 266 kB)
[    0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=1, Nodes=1
[    0.000000] Preemptible hierarchical RCU implementation.
[    0.000000]  Build-time adjustment of leaf fanout to 32.
[    0.000000] NR_IRQS:16 nr_irqs:16 16
[    0.000000] IRQ: Found an INTC at 0xfa200000 (revision 5.0) with 128 interrupts
[    0.000000] OMAP clockevent source: timer2 at 24000000 Hz
[    0.000015] sched_clock: 32 bits at 24MHz, resolution 41ns, wraps every 89478484971ns
[    0.000036] clocksource: timer1: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 79635851949 ns
[    0.000047] OMAP clocksource: timer1 at 24000000 Hz
[    0.000222] clocksource_probe: no matching clocksources found
[    0.000415] Console: colour dummy device 80x30
[    0.000442] WARNING: Your 'console=ttyO0' has been replaced by 'ttyS0'
[    0.000448] This ensures that you still see kernel messages. Please
[    0.000454] update your kernel commandline.
[    0.000473] Calibrating delay loop... 795.44 BogoMIPS (lpj=3977216)
[    0.089064] pid_max: default: 32768 minimum: 301
[    0.089193] Mount-cache hash table entries: 1024 (order: 0, 4096 bytes)
[    0.089205] Mountpoint-cache hash table entries: 1024 (order: 0, 4096 bytes)
[    0.089932] Initializing cgroup subsys io
[    0.089964] Initializing cgroup subsys memory
[    0.090005] Initializing cgroup subsys devices
[    0.090021] Initializing cgroup subsys freezer
[    0.090036] Initializing cgroup subsys perf_event
[    0.090048] Initializing cgroup subsys pids
[    0.090078] CPU: Testing write buffer coherency: ok
[    0.090499] Setting up static identity map for 0x80008200 - 0x80008258
[    0.092680] devtmpfs: initialized
[    0.105440] VFP support v0.3: implementor 41 architecture 3 part 30 variant c rev 3
[    0.120529] omap_hwmod: debugss: _wait_target_disable failed
[    0.175584] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns
[    0.179852] pinctrl core: initialized pinctrl subsystem
[    0.181216] NET: Registered protocol family 16
[    0.183420] DMA: preallocated 256 KiB pool for atomic coherent allocations
[    0.209061] cpuidle: using governor ladder
[    0.239048] cpuidle: using governor menu
[    0.243661] OMAP GPIO hardware version 0.1
[    0.254360] hw-breakpoint: debug architecture 0x4 unsupported.
[    0.297629] edma 49000000.edma: TI EDMA DMA engine driver
[    0.298606] reg-fixed-voltage fixedregulator@2: could not find pctldev for node /ocp/l4_wkup@44c00000/scm@210000/pinmux@800/pinmux_wl12xx_gpio, deferring probe
[    0.302364] omap_i2c 44e0b000.i2c: could not find pctldev for node /ocp/l4_wkup@44c00000/scm@210000/pinmux@800/pinmux_i2c0_pins, deferring probe
[    0.302525] media: Linux media interface: v0.10
[    0.302588] Linux video capture interface: v2.00
[    0.302638] pps_core: LinuxPPS API ver. 1 registered
[    0.302646] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti < <mailto:[email protected]> [email protected]>
[    0.302676] PTP clock support registered
[    0.302741] EDAC MC: Ver: 3.0.0
[    0.303966] omap-mailbox 480c8000.mailbox: omap mailbox rev 0x400
[    0.304332] Advanced Linux Sound Architecture Driver Initialized.
[    0.305512] clocksource: Switched to clocksource timer1
[    0.316775] NET: Registered protocol family 2
[    0.317599] TCP established hash table entries: 2048 (order: 1, 8192 bytes)
[    0.317636] TCP bind hash table entries: 2048 (order: 1, 8192 bytes)
[    0.317663] TCP: Hash tables configured (established 2048 bind 2048)
[    0.317748] UDP hash table entries: 256 (order: 0, 4096 bytes)
[    0.317767] UDP-Lite hash table entries: 256 (order: 0, 4096 bytes)
[    0.317925] NET: Registered protocol family 1
[    0.318352] RPC: Registered named UNIX socket transport module.
[    0.318366] RPC: Registered udp transport module.
[    0.318372] RPC: Registered tcp transport module.
[    0.318379] RPC: Registered tcp NFSv4.1 backchannel transport module.
[    0.319330] hw perfevents: enabled with armv7_cortex_a8 PMU driver, 5 counters available
[    0.321392] futex hash table entries: 256 (order: -1, 3072 bytes)
[    0.329780] squashfs: version 4.0 (2009/01/31) Phillip Lougher
[    0.330717] NFS: Registering the id_resolver key type
[    0.330798] Key type id_resolver registered
[    0.330807] Key type id_legacy registered
[    0.330886] ntfs: driver 2.1.32 [Flags: R/O].
[    0.334673] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 248)
[    0.334706] io scheduler noop registered
[    0.334719] io scheduler deadline registered
[    0.334877] io scheduler cfq registered (default)
[    0.336555] pinctrl-single 44e10800.pinmux: 142 pins at pa f9e10800 size 568
[    0.339415] backlight supply power not found, using dummy regulator
[    0.402480] Serial: 8250/16550 driver, 10 ports, IRQ sharing disabled
[    0.406962] 44e09000.serial: ttyS0 at MMIO 0x44e09000 (irq = 158, base_baud = 3000000) is a 8250
[    1.017357] console [ttyS0] enabled
[    1.022206] 48022000.serial: ttyS1 at MMIO 0x48022000 (irq = 159, base_baud = 3000000) is a 8250
[    1.032273] [drm] Initialized drm 1.1.0 20060810
[    1.039564] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
[    1.046349] [drm] No driver support for vblank timestamp query.
[    1.062121] Console: switching to colour frame buffer device 60x34
[    1.070360] tilcdc 4830e000.lcdc: fb0:  frame buffer device
[    1.105531] [drm] Initialized tilcdc 1.0.0 20121205 on minor 0
[    1.118644] loop: module loaded
[    1.124253] libphy: Fixed MDIO Bus: probed
[    1.185550] davinci_mdio 4a101000.mdio: davinci mdio revision 1.6
[    1.191695] davinci_mdio 4a101000.mdio: detected phy mask fffffffe
[    1.198786] libphy: 4a101000.mdio: probed
[    1.202886] davinci_mdio 4a101000.mdio: phy[0]: device 4a101000.mdio:00, driver SMSC LAN8710/LAN8720
[    1.212890] cpsw 4a100000.ethernet: Detected MACID = a0:f6:fd:4c:a6:ba
[    1.220531] cpsw 4a100000.ethernet: cpsw: Detected MACID = c4:ed:ba:88:2a:92
[    1.229382] mousedev: PS/2 mouse device common for all mice
[    1.235845] i2c /dev entries driver
[    1.240508] cpuidle: enable-method property 'ti,am3352' found operations
[    1.248197] omap_hsmmc 48060000.mmc: Got CD GPIO
[    1.275713] pinctrl-single 44e10800.pinmux: bad data for mux pinmux_mmc2_pins
[    1.282895] pinctrl-single 44e10800.pinmux: no pins entries for pinmux_mmc2_pins
[    1.317159] ledtrig-cpu: registered to indicate activity on CPUs
[    1.326069] NET: Registered protocol family 10
[    1.332092] sit: IPv6 over IPv4 tunneling driver
[    1.337715] NET: Registered protocol family 17
[    1.342510] Key type dns_resolver registered
[    1.347095] omap_voltage_late_init: Voltage driver support not added
[    1.407145] tps65910-rtc tps65910-rtc: rtc core: registered tps65910-rtc as rtc0
[    1.415278] omap_i2c 44e0b000.i2c: bus 0 rev0.11 at 400 kHz
[    1.421665] omap_hsmmc 48060000.mmc: Got CD GPIO
[    1.426813] vmmc: supplied by vbat
[    1.466341] pinctrl-single 44e10800.pinmux: bad data for mux pinmux_mmc2_pins
[    1.474737] pinctrl-single 44e10800.pinmux: no pins entries for pinmux_mmc2_pins
[    1.513247] mmc0: host does not support reading read-only switch, assuming write-enable
[    1.523414] mmc0: new high speed SDHC card at address 0001
[    1.529635] mmcblk0: mmc0:0001 AS 3.72 GiB
[    1.535996]  mmcblk0: p1 p2 p3
[    1.595932] vdd_mpu: supplied by vbat
[    1.602167] input: gpio_buttons@0 as /devices/platform/gpio_buttons@0/input/input0
[    1.618291] tps65910-rtc tps65910-rtc: setting system clock to 2019-02-01 20:07:49 UTC (1549051669)
[    1.639394] lis3_reg: disabling
[    1.655732] ALSA device list:
[    1.658720]   No soundcards found.
[    1.678290] EXT4-fs (mmcblk0p3): couldn't mount as ext3 due to feature incompatibilities
[    1.696920] EXT4-fs (mmcblk0p3): couldn't mount as ext2 due to feature incompatibilities
[    2.183999] EXT4-fs (mmcblk0p3): recovery complete
[    2.196864] EXT4-fs (mmcblk0p3): mounted filesystem with ordered data mode. Opts: (null)
[    2.205084] VFS: Mounted root (ext4 filesystem) on device 179:3.
[    2.225670] devtmpfs: mounted
[    2.235781] Freeing unused kernel memory: 260K (c08b1000 - c08f2000)
[    2.242162] This architecture does not have kernel memory protection.

INIT: version 2.88 booting

Starting udev

[    3.090091] udevd[78]: starting version 3.2.5
[    3.106175] random: udevd: uninitialized urandom read (16 bytes read, 26 bits of entropy available)
[    3.118667] random: udevd: uninitialized urandom read (16 bytes read, 26 bits of entropy available)
[    3.128014] random: udevd: uninitialized urandom read (16 bytes read, 26 bits of entropy available)
[    3.137335] random: udevd: uninitialized urandom read (16 bytes read, 26 bits of entropy available)
[    3.218433] udevd[79]: starting eudev-3.2.5
[    3.325886] random: udevd: uninitialized urandom read (16 bytes read, 29 bits of entropy available)
[    3.346155] random: udevd: uninitialized urandom read (16 bytes read, 29 bits of entropy available)
[    4.820708] EXT4-fs (mmcblk0p3): re-mounted. Opts: data=ordered
[    5.548283] random: dd: uninitialized urandom read (512 bytes read, 43 bits of entropy available)

INIT: Entering runlevel: 5

Configuring network interfaces... [ 5.820546] net eth0: initializing cpsw version 1.12 (0)

[    5.825987] net eth0: initialized cpsw ale version 1.4
[    5.831150] net eth0: ALE Table size 1024
[    5.838581] net eth0: phy found : id is : 0x7c0f1
[    5.851838] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
[    9.896392] cpsw 4a100000.ethernet eth0: Link is Up - 100Mbps/Full - flow control rx/tx
[    9.904635] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready

chown: unrecognized option '--reference=/etc/resolv.conf'

BusyBox v1.27.2 (2018-11-05 21:16:09 UTC) multi-call binary.

Usage: chown [-Rh]... USER[:[GRP]] FILE...

chmod: unrecognized option '--reference=/etc/resolv.conf'

BusyBox v1.27.2 (2018-11-05 21:16:09 UTC) multi-call binary.

Usage: chmod [-R] MODE[,MODE]... FILE...

done.

Starting system message bus: [ 14.887099] random: dbus-daemon: uninitialized urandom read (12 bytes read, 62 bits of entropy available)

[   14.912318] random: dbus-daemon: uninitialized urandom read (12 bytes read, 62 bits of entropy available)

dbus.

Starting OpenBSD Secure Shell server: sshd

[   15.393971] random: sshd: uninitialized urandom read (32 bytes read, 65 bits of entropy available)

done.

Starting Xserver

Starting DHCP server:

.

starting DNS forwarder and DHCP server: dnsmasq...

X.Org X Server 1.19.6

Release Date: 2017-12-20

X Protocol Version 11, Revision 0

Build Operating System: Linux 4.15.0-38-generic x86_64

Current Operating System: Linux polycaptil-machine-am335x-evmsk 4.4.19-ge581bb1cac #1 PREEMPT Thu May 24 11:42:17 CEST 2018 armv7l

Kernel command line: console=ttyO0,115200 root=/dev/mmcblk0p3 rw

Build Date: 05 November 2018 09:33:21PM

Current version of pixman: 0.34.0

Before reporting problems, check <http://wiki.x.org> http://wiki.x.org

to make sure that you have the latest version.

Markers: (--) probed, (**) from config file, (==) default setting,

(++) from command line, (!!) notice, (II) informational,

(WW) warning, (EE) error, (NI) not implemented, (??) unknown.

(==) Log file: "/var/log/Xorg.0.log", Time: Fri Feb 1 20:08:02 2019

(==) Using config file: "/etc/X11/xorg.conf"

(==) Using system config directory "/usr/share/X11/xorg.conf.d"

done.

Starting HOSTAP Daemon: Configuration file: /etc/hostapd.conf

nl80211: 'nl80211' generic netlink not found

Failed to initialize driver 'nl80211'

wlan0: interface state UNINITIALIZED->DISABLED

wlan0: AP-DISABLED

hostapd_free_hapd_data: Interface wlan0 wasn't started

Starting ntpd: done

Starting syslogd/klogd: done

Starting crond: OK

Poky (Yocto Project Reference Distro) 2.5
polycaptil-machine-am335x-evmsk /dev/ttyS0

polycaptil-machine-am335x-evmsk login: D-BUS per-session daemon address is:
unix:abstract=/tmp/dbus-07WuJSySeb,guid=a3e41f2692316c19766e95535c54a7 25

Size 1024x768 not found in available modes

Error: No calibratable devices found.

matchbox: Cant find a keycode for keysym 269025056

matchbox: ignoring key shortcut XF86Calendar=!$contacts

matchbox: Cant find a keycode for keysym 2809

matchbox: ignoring key shortcut telephone=!$dates

matchbox: Cant find a keycode for keysym 269025050

matchbox: ignoring key shortcut XF86Start=!matchbox-remote -desktop

dbus-daemon[358]: Activating service name='org.a11y.atspi.Registry' requested by ':1.0' (uid=0 pid=354 comm="matchbox-terminal ")

dbus-daemon[358]: Successfully activated service 'org.a11y.atspi.Registry'

SpiRegistry daemon is running with well-known name - org.a11y.atspi.Registry

[   30.662697] random: nonblocking pool is initialized

Poky (Yocto Project Reference Distro) 2.5
polycaptil-machine-am335x-evmsk /dev/ttyS0

Thank’s to take time to read my message.

N.Stanisavljevic

--
_______________________________________________
yocto mailing list
<mailto:[email protected]> [email protected]
<https://lists.yoctoproject.org/listinfo/yocto> https://lists.yoctoproject.org/listinfo/yocto

#13 lore raw

Hello Nikola,

One friendly advise: please, for the very long boot messages use paste-bin site:
https://pastebin.com/69D1Ps1W
_______

I am not an expert on X11, but I have noticed the following:

Quoted 1 line

I use a DTB file from krogoth version, because, I tried to use the DTB

file

Quoted 1 line

generated for sumo thud and warrior version but it’s didn’t work.

This could be from the fact that you are using almost three year old kernel. Krogoth was released in 04.2016: https://wiki.yoctoproject.org/wiki/Releases
The kernel 4.4.19 was released in 08.2016:
https://www.spinics.net/lists/announce-kernel/msg01655.html

So, you are using correct krogoth DTB for the adequate 4.4.19 kernel.

I do not track all the kernel changes (I am not Greg Kroah-Hartman, and not ought to be :-) ), but there is a possibility that DTS compiler changed some formats? You need to explore this. Does the DTS compiler change the format in recent kernels for GFX (remote, but still the possibility)?

Quoted 1 line

I only update files in rootfs partition (with developed versions) and not

boot

Quoted 1 line

partition. While boot process is running, the splashscreen appear

correctly,

Quoted 1 line

but immediately when the terminal session appears, the touchscreen lock.

I assume, U-Boot keeps its own DTS file, while kernel its own. In your case, the splash screen could come out from Grub (which is part of the /boot, not changed as said), *or, perhaps, from booting of the early stage kernel.*

*If it is so, it does explain correct splash screen, since in this stage* *kernel does NOT use X11 framework, rather fbdev (very simplistic i/f).*

From the log:

Quoted 2 lines

Current Operating System: *Linux am335x-evm 4.4.19-ge581bb1cac* #1 PREEMPT Thu May 24 11:42:17 CEST 2018 armv7l

Seems that 1.20.4 X11 org. and kernel 4.4.19 I/F are not in sync (most likely)?

*My kludge/educated guess at this point will be to change the kernel to 4.20...*
*Or similar (one native to warrior release).*

Any other opinion from YOCTO mailing list?

Thank you,
Zoran
_______

Quoted 3,353 lines · Stanisavljevic

Hello Zoran

I tried to change screen resolution with xrandr to change the screen resolution to 480x272 (it is the screen resolution of the touchscreen) but it’s changes nothing screen resolution seems to stay to 1024x768

I defined on the device tree the screen resolution but it’s like it was not taken in account

Here is the definition of the touchscreen resolution in the device tree :

                               display-timings {

                                               480x272 {

hactive = <480>;

vactive = <272>;

hback-porch = <43>;

hfront-porch = <8>;

hsync-len = <4>;

vback-porch = <12>;

vfront-porch = <4>;

vsync-len = <10>;

clock-frequency = <9000000>;

hsync-active = <0>;

vsync-active = <0>;

                                               };

I use a DTB file from krogoth version, because, I tried to use the DTB file generated for sumo thud and warrior version but it’s didn’t work.

I only update files in rootfs partition (with developed versions) and not boot partition

While boot process is running, the splashscreen appear correctly, but immediately when the terminal session appears, the touchscreen lock.

Here is what is in Xorg.0.log

root@am335x-evm:~# cat /var/log/Xorg.0.log
[    15.212]

X.Org X Server 1.20.4

X Protocol Version 11, Revision 0

[    15.212] Build Operating System: Linux 4.15.0-45-generic x86_64
[    15.212] Current Operating System: Linux am335x-evm 4.4.19-ge581bb1cac

#1 PREEMPT Thu May 24 11:42:17 CEST 2018 armv7l

[    15.213] Kernel command line: console=ttyO0,115200 root=/dev/mmcblk0p2

rw

[    15.213] Build Date: 10 April 2019  08:15:46PM
[    15.213]
[    15.213] Current version of pixman: 0.38.0
[    15.213]    Before reporting problems, check http://wiki.x.org

to make sure that you have the latest version.

[    15.213] Markers: (--) probed, (**) from config file, (==) default

setting,

(++) from command line, (!!) notice, (II) informational,

(WW) warning, (EE) error, (NI) not implemented, (??) unknown.

[    15.213] (==) Log file: "/var/log/Xorg.0.log", Time: Thu Apr 11

15:51:53 2019

[    15.219] (==) Using config file: "/etc/X11/xorg.conf"
[    15.219] (==) Using system config directory

"/usr/share/X11/xorg.conf.d"

[    15.235] (==) ServerLayout "Builtin Default Layout"
[    15.235] (**) |-->Screen "Builtin Default fbdev Screen 0" (0)
[    15.235] (**) |   |-->Monitor "Builtin Default Monitor"
[    15.237] (**) |   |-->Device "Builtin Default fbdev Device 0"
[    15.237] (==) Automatically adding devices
[    15.237] (==) Automatically enabling devices
[    15.237] (==) Automatically adding GPU devices
[    15.237] (==) Max clients allowed: 256, resource mask: 0x1fffff
[    15.238] (WW) The directory "/usr/share/fonts/X11/misc/" does not

exist.

[    15.238]    Entry deleted from font path.
[    15.239] (WW) The directory "/usr/share/fonts/X11/TTF/" does not exist.
[    15.239]    Entry deleted from font path.
[    15.239] (WW) The directory "/usr/share/fonts/X11/OTF/" does not exist.
[    15.239]    Entry deleted from font path.
[    15.239] (WW) The directory "/usr/share/fonts/X11/Type1/" does not

exist.

[    15.239]    Entry deleted from font path.
[    15.239] (WW) The directory "/usr/share/fonts/X11/100dpi/" does not

exist.

[    15.239]    Entry deleted from font path.
[    15.239] (WW) The directory "/usr/share/fonts/X11/75dpi/" does not

exist.

[    15.239]    Entry deleted from font path.
[    15.239] (==) FontPath set to:
[    15.239] (==) ModulePath set to "/usr/lib/xorg/modules"
[    15.239] (II) The server relies on udev to provide the list of input

devices.

If no devices become available, reconfigure udev or disable
AutoAddDevices.

[    15.239] (II) Loader magic: 0x7f73dd78
[    15.239] (II) Module ABI versions:
[    15.239]    X.Org ANSI C Emulation: 0.4
[    15.239]    X.Org Video Driver: 24.0
[    15.239]    X.Org XInput driver : 24.1
[    15.239]    X.Org Server Extension : 10.0
[    15.245] (II) xfree86: Adding drm device (/dev/dri/card0)
[    15.248] (II) no primary bus or device found
[    15.248]    falling back to

/sys/devices/platform/ocp/4830e000.lcdc/drm/card0

[    15.249] (II) "glx" will be loaded. This was enabled by default and

also specified in the config file.

[    15.249] (II) LoadModule: "extmod"
[    15.249] (II) Module "extmod" already built-in
[    15.249] (II) LoadModule: "dbe"
[    15.249] (II) Module "dbe" already built-in
[    15.249] (II) LoadModule: "glx"
[    15.261] (WW) Warning, couldn't open module glx
[    15.261] (EE) Failed to load module "glx" (module does not exist, 0)
[    15.262] (II) LoadModule: "record"
[    15.262] (II) Module "record" already built-in
[    15.262] (II) LoadModule: "dri"
[    15.262] (II) Module "dri" already built-in
[    15.262] (II) LoadModule: "fbdev"
[    15.262] (II) Loading /usr/lib/xorg/modules/drivers/fbdev_drv.so
[    15.267] (II) Module fbdev: vendor="X.Org Foundation"
[    15.267]    compiled for 1.20.4, module version = 0.5.0
[    15.267]    Module class: X.Org Video Driver
[    15.267]    ABI class: X.Org Video Driver, version 24.0
[    15.267] (II) FBDEV: driver for framebuffer: fbdev
[    15.268] (--) using VT number 3
[    15.277] (WW) Falling back to old probe method for fbdev
[    15.277] (II) Loading sub module "fbdevhw"
[    15.277] (II) LoadModule: "fbdevhw"
[    15.277] (II) Loading /usr/lib/xorg/modules/libfbdevhw.so
[    15.281] (II) Module fbdevhw: vendor="X.Org Foundation"
[    15.281]    compiled for 1.20.4, module version = 0.0.2
[    15.281]    ABI class: X.Org Video Driver, version 24.0
[    15.281] (II) FBDEV(0): using default device
[    15.282] (WW) VGA arbiter: cannot open kernel arbiter, no multi-card

support

[    15.282] (II) FBDEV(0): Creating default Display subsection in Screen

section

"Builtin Default fbdev Screen 0" for depth/fbbpp 24/32

[    15.282] (==) FBDEV(0): Depth 24, (==) framebuffer bpp 32
[    15.282] (==) FBDEV(0): RGB weight 888
[    15.282] (==) FBDEV(0): Default visual is TrueColor
[    15.282] (==) FBDEV(0): Using gamma correction (1.0, 1.0, 1.0)
[    15.282] (II) FBDEV(0): hardware:  (video memory: 510kB)
[    15.282] (DB) xf86MergeOutputClassOptions unsupported bus type 0
[    15.282] (II) FBDEV(0): checking modes against framebuffer device...
[    15.282] (II) FBDEV(0): checking modes against monitor...
[    15.282] (II) FBDEV(0): Virtual size is 480x272 (pitch 480)
[    15.282] (**) FBDEV(0):  Built-in mode "current"
[    15.282] (==) FBDEV(0): DPI set to (96, 96)
[    15.282] (II) Loading sub module "fb"
[    15.282] (II) LoadModule: "fb"
[    15.283] (II) Loading /usr/lib/xorg/modules/libfb.so
[    15.297] (II) Module fb: vendor="X.Org Foundation"
[    15.297]    compiled for 1.20.4, module version = 1.0.0
[    15.297]    ABI class: X.Org ANSI C Emulation, version 0.4
[    15.297] (**) FBDEV(0): using shadow framebuffer
[    15.298] (II) Loading sub module "shadow"
[    15.298] (II) LoadModule: "shadow"
[    15.298] (II) Loading /usr/lib/xorg/modules/libshadow.so
[    15.304] (II) Module shadow: vendor="X.Org Foundation"
[    15.304]    compiled for 1.20.4, module version = 1.1.0
[    15.304]    ABI class: X.Org ANSI C Emulation, version 0.4
[    15.324] (==) FBDEV(0): Backing store enabled
[    15.325] (EE) FBDEV(0): FBIOPUTCMAP: Invalid argument
[    15.325] (EE) FBDEV(0): FBIOPUTCMAP: Invalid argument
[    15.325] (EE) FBDEV(0): FBIOPUTCMAP: Invalid argument
[    15.325] (EE) FBDEV(0): FBIOPUTCMAP: Invalid argument
[    15.325] (EE) FBDEV(0): FBIOPUTCMAP: Invalid argument
[    15.325] (EE) FBDEV(0): FBIOPUTCMAP: Invalid argument
[    15.325] (EE) FBDEV(0): FBIOPUTCMAP: Invalid argument
[    15.325] (EE) FBDEV(0): FBIOPUTCMAP: Invalid argument
[    15.325] (EE) FBDEV(0): FBIOPUTCMAP: Invalid argument
[    15.325] (EE) FBDEV(0): FBIOPUTCMAP: Invalid argument
[    15.325] (EE) FBDEV(0): FBIOPUTCMAP: Invalid argument
[    15.325] (EE) FBDEV(0): FBIOPUTCMAP: Invalid argument
[    15.325] (EE) FBDEV(0): FBIOPUTCMAP: Invalid argument
[    15.325] (EE) FBDEV(0): FBIOPUTCMAP: Invalid argument
[    15.325] (EE) FBDEV(0): FBIOPUTCMAP: Invalid argument
[    15.325] (EE) FBDEV(0): FBIOPUTCMAP: Invalid argument
[    15.326] (EE) FBDEV(0): FBIOPUTCMAP: Invalid argument
[    15.326] (EE) FBDEV(0): FBIOPUTCMAP: Invalid argument
[    15.326] (EE) FBDEV(0): FBIOPUTCMAP: Invalid argument
[    15.326] (EE) FBDEV(0): FBIOPUTCMAP: Invalid argument
[    15.326] (EE) FBDEV(0): FBIOPUTCMAP: Invalid argument
[    15.326] (EE) FBDEV(0): FBIOPUTCMAP: Invalid argument
[    15.326] (EE) FBDEV(0): FBIOPUTCMAP: Invalid argument
[    15.326] (EE) FBDEV(0): FBIOPUTCMAP: Invalid argument
[    15.326] (EE) FBDEV(0): FBIOPUTCMAP: Invalid argument
[    15.326] (EE) FBDEV(0): FBIOPUTCMAP: Invalid argument
[    15.326] (EE) FBDEV(0): FBIOPUTCMAP: Invalid argument
[    15.326] (EE) FBDEV(0): FBIOPUTCMAP: Invalid argument
[    15.326] (EE) FBDEV(0): FBIOPUTCMAP: Invalid argument
[    15.326] (EE) FBDEV(0): FBIOPUTCMAP: Invalid argument
[    15.326] (EE) FBDEV(0): FBIOPUTCMAP: Invalid argument
[    15.326] (EE) FBDEV(0): FBIOPUTCMAP: Invalid argument
[    15.326] (EE) FBDEV(0): FBIOPUTCMAP: Invalid argument
[    15.326] (EE) FBDEV(0): FBIOPUTCMAP: Invalid argument
[    15.326] (EE) FBDEV(0): FBIOPUTCMAP: Invalid argument
[    15.326] (EE) FBDEV(0): FBIOPUTCMAP: Invalid argument
[    15.326] (EE) FBDEV(0): FBIOPUTCMAP: Invalid argument
[    15.326] (EE) FBDEV(0): FBIOPUTCMAP: Invalid argument
[    15.326] (EE) FBDEV(0): FBIOPUTCMAP: Invalid argument
[    15.326] (EE) FBDEV(0): FBIOPUTCMAP: Invalid argument
[    15.327] (EE) FBDEV(0): FBIOPUTCMAP: Invalid argument
[    15.327] (EE) FBDEV(0): FBIOPUTCMAP: Invalid argument
[    15.327] (EE) FBDEV(0): FBIOPUTCMAP: Invalid argument
[    15.327] (EE) FBDEV(0): FBIOPUTCMAP: Invalid argument
[    15.327] (EE) FBDEV(0): FBIOPUTCMAP: Invalid argument
[    15.327] (EE) FBDEV(0): FBIOPUTCMAP: Invalid argument
[    15.327] (EE) FBDEV(0): FBIOPUTCMAP: Invalid argument
[    15.327] (EE) FBDEV(0): FBIOPUTCMAP: Invalid argument
[    15.327] (EE) FBDEV(0): FBIOPUTCMAP: Invalid argument
[    15.327] (EE) FBDEV(0): FBIOPUTCMAP: Invalid argument
[    15.327] (EE) FBDEV(0): FBIOPUTCMAP: Invalid argument
[    15.327] (EE) FBDEV(0): FBIOPUTCMAP: Invalid argument
[    15.327] (EE) FBDEV(0): FBIOPUTCMAP: Invalid argument
[    15.327] (EE) FBDEV(0): FBIOPUTCMAP: Invalid argument
[    15.327] (EE) FBDEV(0): FBIOPUTCMAP: Invalid argument
[    15.327] (EE) FBDEV(0): FBIOPUTCMAP: Invalid argument
[    15.327] (EE) FBDEV(0): FBIOPUTCMAP: Invalid argument
[    15.327] (EE) FBDEV(0): FBIOPUTCMAP: Invalid argument
[    15.327] (EE) FBDEV(0): FBIOPUTCMAP: Invalid argument
[    15.327] (EE) FBDEV(0): FBIOPUTCMAP: Invalid argument
[    15.327] (EE) FBDEV(0): FBIOPUTCMAP: Invalid argument
[    15.327] (EE) FBDEV(0): FBIOPUTCMAP: Invalid argument
[    15.327] (EE) FBDEV(0): FBIOPUTCMAP: Invalid argument
[    15.327] (EE) FBDEV(0): FBIOPUTCMAP: Invalid argument
[    15.327] (EE) FBDEV(0): FBIOPUTCMAP: Invalid argument
[    15.328] (EE) FBDEV(0): FBIOPUTCMAP: Invalid argument
[    15.328] (EE) FBDEV(0): FBIOPUTCMAP: Invalid argument
[    15.328] (EE) FBDEV(0): FBIOPUTCMAP: Invalid argument
[    15.328] (EE) FBDEV(0): FBIOPUTCMAP: Invalid argument
[    15.328] (EE) FBDEV(0): FBIOPUTCMAP: Invalid argument
[    15.328] (EE) FBDEV(0): FBIOPUTCMAP: Invalid argument
[    15.328] (EE) FBDEV(0): FBIOPUTCMAP: Invalid argument
[    15.328] (EE) FBDEV(0): FBIOPUTCMAP: Invalid argument
[    15.328] (EE) FBDEV(0): FBIOPUTCMAP: Invalid argument
[    15.328] (EE) FBDEV(0): FBIOPUTCMAP: Invalid argument
[    15.328] (EE) FBDEV(0): FBIOPUTCMAP: Invalid argument
[    15.328] (EE) FBDEV(0): FBIOPUTCMAP: Invalid argument
[    15.328] (EE) FBDEV(0): FBIOPUTCMAP: Invalid argument
[    15.328] (EE) FBDEV(0): FBIOPUTCMAP: Invalid argument
[    15.328] (EE) FBDEV(0): FBIOPUTCMAP: Invalid argument
[    15.328] (EE) FBDEV(0): FBIOPUTCMAP: Invalid argument
[    15.328] (EE) FBDEV(0): FBIOPUTCMAP: Invalid argument
[    15.328] (EE) FBDEV(0): FBIOPUTCMAP: Invalid argument
[    15.328] (EE) FBDEV(0): FBIOPUTCMAP: Invalid argument
[    15.328] (EE) FBDEV(0): FBIOPUTCMAP: Invalid argument
[    15.328] (EE) FBDEV(0): FBIOPUTCMAP: Invalid argument
[    15.328] (EE) FBDEV(0): FBIOPUTCMAP: Invalid argument
[    15.328] (EE) FBDEV(0): FBIOPUTCMAP: Invalid argument
[    15.328] (EE) FBDEV(0): FBIOPUTCMAP: Invalid argument
[    15.328] (EE) FBDEV(0): FBIOPUTCMAP: Invalid argument
[    15.329] (EE) FBDEV(0): FBIOPUTCMAP: Invalid argument
[    15.329] (EE) FBDEV(0): FBIOPUTCMAP: Invalid argument
[    15.329] (EE) FBDEV(0): FBIOPUTCMAP: Invalid argument
[    15.329] (EE) FBDEV(0): FBIOPUTCMAP: Invalid argument
[    15.329] (EE) FBDEV(0): FBIOPUTCMAP: Invalid argument
[    15.329] (EE) FBDEV(0): FBIOPUTCMAP: Invalid argument
[    15.329] (EE) FBDEV(0): FBIOPUTCMAP: Invalid argument
[    15.329] (EE) FBDEV(0): FBIOPUTCMAP: Invalid argument
[    15.329] (EE) FBDEV(0): FBIOPUTCMAP: Invalid argument
[    15.329] (EE) FBDEV(0): FBIOPUTCMAP: Invalid argument
[    15.329] (EE) FBDEV(0): FBIOPUTCMAP: Invalid argument
[    15.329] (EE) FBDEV(0): FBIOPUTCMAP: Invalid argument
[    15.329] (EE) FBDEV(0): FBIOPUTCMAP: Invalid argument
[    15.329] (EE) FBDEV(0): FBIOPUTCMAP: Invalid argument
[    15.329] (EE) FBDEV(0): FBIOPUTCMAP: Invalid argument
[    15.329] (EE) FBDEV(0): FBIOPUTCMAP: Invalid argument
[    15.329] (EE) FBDEV(0): FBIOPUTCMAP: Invalid argument
[    15.329] (EE) FBDEV(0): FBIOPUTCMAP: Invalid argument
[    15.329] (EE) FBDEV(0): FBIOPUTCMAP: Invalid argument
[    15.329] (EE) FBDEV(0): FBIOPUTCMAP: Invalid argument
[    15.329] (EE) FBDEV(0): FBIOPUTCMAP: Invalid argument
[    15.329] (EE) FBDEV(0): FBIOPUTCMAP: Invalid argument
[    15.329] (EE) FBDEV(0): FBIOPUTCMAP: Invalid argument
[    15.329] (EE) FBDEV(0): FBIOPUTCMAP: Invalid argument
[    15.329] (EE) FBDEV(0): FBIOPUTCMAP: Invalid argument
[    15.330] (EE) FBDEV(0): FBIOPUTCMAP: Invalid argument
[    15.330] (EE) FBDEV(0): FBIOPUTCMAP: Invalid argument
[    15.330] (EE) FBDEV(0): FBIOPUTCMAP: Invalid argument
[    15.330] (EE) FBDEV(0): FBIOPUTCMAP: Invalid argument
[    15.330] (EE) FBDEV(0): FBIOPUTCMAP: Invalid argument
[    15.330] (EE) FBDEV(0): FBIOPUTCMAP: Invalid argument
[    15.330] (EE) FBDEV(0): FBIOPUTCMAP: Invalid argument
[    15.330] (EE) FBDEV(0): FBIOPUTCMAP: Invalid argument
[    15.330] (EE) FBDEV(0): FBIOPUTCMAP: Invalid argument
[    15.330] (EE) FBDEV(0): FBIOPUTCMAP: Invalid argument
[    15.330] (EE) FBDEV(0): FBIOPUTCMAP: Invalid argument
[    15.330] (EE) FBDEV(0): FBIOPUTCMAP: Invalid argument
[    15.330] (EE) FBDEV(0): FBIOPUTCMAP: Invalid argument
[    15.330] (EE) FBDEV(0): FBIOPUTCMAP: Invalid argument
[    15.330] (EE) FBDEV(0): FBIOPUTCMAP: Invalid argument
[    15.330] (EE) FBDEV(0): FBIOPUTCMAP: Invalid argument
[    15.330] (EE) FBDEV(0): FBIOPUTCMAP: Invalid argument
[    15.330] (EE) FBDEV(0): FBIOPUTCMAP: Invalid argument
[    15.330] (EE) FBDEV(0): FBIOPUTCMAP: Invalid argument
[    15.330] (EE) FBDEV(0): FBIOPUTCMAP: Invalid argument
[    15.331] (EE) FBDEV(0): FBIOPUTCMAP: Invalid argument
[    15.331] (EE) FBDEV(0): FBIOPUTCMAP: Invalid argument
[    15.331] (EE) FBDEV(0): FBIOPUTCMAP: Invalid argument
[    15.331] (EE) FBDEV(0): FBIOPUTCMAP: Invalid argument
[    15.331] (EE) FBDEV(0): FBIOPUTCMAP: Invalid argument
[    15.331] (EE) FBDEV(0): FBIOPUTCMAP: Invalid argument
[    15.331] (EE) FBDEV(0): FBIOPUTCMAP: Invalid argument
[    15.331] (EE) FBDEV(0): FBIOPUTCMAP: Invalid argument
[    15.331] (EE) FBDEV(0): FBIOPUTCMAP: Invalid argument
[    15.331] (EE) FBDEV(0): FBIOPUTCMAP: Invalid argument
[    15.331] (EE) FBDEV(0): FBIOPUTCMAP: Invalid argument
[    15.331] (EE) FBDEV(0): FBIOPUTCMAP: Invalid argument
[    15.331] (EE) FBDEV(0): FBIOPUTCMAP: Invalid argument
[    15.331] (EE) FBDEV(0): FBIOPUTCMAP: Invalid argument
[    15.331] (EE) FBDEV(0): FBIOPUTCMAP: Invalid argument
[    15.331] (EE) FBDEV(0): FBIOPUTCMAP: Invalid argument
[    15.331] (EE) FBDEV(0): FBIOPUTCMAP: Invalid argument
[    15.331] (EE) FBDEV(0): FBIOPUTCMAP: Invalid argument
[    15.331] (EE) FBDEV(0): FBIOPUTCMAP: Invalid argument
[    15.331] (EE) FBDEV(0): FBIOPUTCMAP: Invalid argument
[    15.331] (EE) FBDEV(0): FBIOPUTCMAP: Invalid argument
[    15.331] (EE) FBDEV(0): FBIOPUTCMAP: Invalid argument
[    15.331] (EE) FBDEV(0): FBIOPUTCMAP: Invalid argument
[    15.331] (EE) FBDEV(0): FBIOPUTCMAP: Invalid argument
[    15.331] (EE) FBDEV(0): FBIOPUTCMAP: Invalid argument
[    15.332] (EE) FBDEV(0): FBIOPUTCMAP: Invalid argument
[    15.332] (EE) FBDEV(0): FBIOPUTCMAP: Invalid argument
[    15.332] (EE) FBDEV(0): FBIOPUTCMAP: Invalid argument
[    15.332] (EE) FBDEV(0): FBIOPUTCMAP: Invalid argument
[    15.332] (EE) FBDEV(0): FBIOPUTCMAP: Invalid argument
[    15.332] (EE) FBDEV(0): FBIOPUTCMAP: Invalid argument
[    15.332] (EE) FBDEV(0): FBIOPUTCMAP: Invalid argument
[    15.332] (EE) FBDEV(0): FBIOPUTCMAP: Invalid argument
[    15.332] (EE) FBDEV(0): FBIOPUTCMAP: Invalid argument
[    15.332] (EE) FBDEV(0): FBIOPUTCMAP: Invalid argument
[    15.332] (EE) FBDEV(0): FBIOPUTCMAP: Invalid argument
[    15.332] (EE) FBDEV(0): FBIOPUTCMAP: Invalid argument
[    15.332] (EE) FBDEV(0): FBIOPUTCMAP: Invalid argument
[    15.332] (EE) FBDEV(0): FBIOPUTCMAP: Invalid argument
[    15.332] (EE) FBDEV(0): FBIOPUTCMAP: Invalid argument
[    15.332] (EE) FBDEV(0): FBIOPUTCMAP: Invalid argument
[    15.332] (EE) FBDEV(0): FBIOPUTCMAP: Invalid argument
[    15.332] (EE) FBDEV(0): FBIOPUTCMAP: Invalid argument
[    15.332] (EE) FBDEV(0): FBIOPUTCMAP: Invalid argument
[    15.332] (EE) FBDEV(0): FBIOPUTCMAP: Invalid argument
[    15.332] (EE) FBDEV(0): FBIOPUTCMAP: Invalid argument
[    15.332] (EE) FBDEV(0): FBIOPUTCMAP: Invalid argument
[    15.332] (EE) FBDEV(0): FBIOPUTCMAP: Invalid argument
[    15.332] (EE) FBDEV(0): FBIOPUTCMAP: Invalid argument
[    15.332] (EE) FBDEV(0): FBIOPUTCMAP: Invalid argument
[    15.333] (EE) FBDEV(0): FBIOPUTCMAP: Invalid argument
[    15.333] (EE) FBDEV(0): FBIOPUTCMAP: Invalid argument
[    15.333] (EE) FBDEV(0): FBIOPUTCMAP: Invalid argument
[    15.333] (EE) FBDEV(0): FBIOPUTCMAP: Invalid argument
[    15.333] (EE) FBDEV(0): FBIOPUTCMAP: Invalid argument
[    15.333] (EE) FBDEV(0): FBIOPUTCMAP: Invalid argument
[    15.333] (EE) FBDEV(0): FBIOPUTCMAP: Invalid argument
[    15.333] (EE) FBDEV(0): FBIOPUTCMAP: Invalid argument
[    15.333] (EE) FBDEV(0): FBIOPUTCMAP: Invalid argument
[    15.333] (EE) FBDEV(0): FBIOPUTCMAP: Invalid argument
[    15.333] (EE) FBDEV(0): FBIOPUTCMAP: Invalid argument
[    15.333] (EE) FBDEV(0): FBIOPUTCMAP: Invalid argument
[    15.333] (EE) FBDEV(0): FBIOPUTCMAP: Invalid argument
[    15.333] (EE) FBDEV(0): FBIOPUTCMAP: Invalid argument
[    15.333] (EE) FBDEV(0): FBIOPUTCMAP: Invalid argument
[    15.333] (EE) FBDEV(0): FBIOPUTCMAP: Invalid argument
[    15.333] (EE) FBDEV(0): FBIOPUTCMAP: Invalid argument
[    15.333] (EE) FBDEV(0): FBIOPUTCMAP: Invalid argument
[    15.333] (EE) FBDEV(0): FBIOPUTCMAP: Invalid argument
[    15.333] (EE) FBDEV(0): FBIOPUTCMAP: Invalid argument
[    15.333] (EE) FBDEV(0): FBIOPUTCMAP: Invalid argument
[    15.333] (EE) FBDEV(0): FBIOPUTCMAP: Invalid argument
[    15.333] (EE) FBDEV(0): FBIOPUTCMAP: Invalid argument
[    15.333] (EE) FBDEV(0): FBIOPUTCMAP: Invalid argument
[    15.334] (EE) FBDEV(0): FBIOPUTCMAP: Invalid argument
[    15.334] (EE) FBDEV(0): FBIOPUTCMAP: Invalid argument
[    15.334] (EE) FBDEV(0): FBIOPUTCMAP: Invalid argument
[    15.334] (EE) FBDEV(0): FBIOPUTCMAP: Invalid argument
[    15.334] (EE) FBDEV(0): FBIOPUTCMAP: Invalid argument
[    15.334] (EE) FBDEV(0): FBIOPUTCMAP: Invalid argument
[    15.334] (EE) FBDEV(0): FBIOPUTCMAP: Invalid argument
[    15.334] (EE) FBDEV(0): FBIOPUTCMAP: Invalid argument
[    15.334] (EE) FBDEV(0): FBIOPUTCMAP: Invalid argument
[    15.334] (EE) FBDEV(0): FBIOPUTCMAP: Invalid argument
[    15.334] (EE) FBDEV(0): FBIOPUTCMAP: Invalid argument
[    15.334] (EE) FBDEV(0): FBIOPUTCMAP: Invalid argument
[    15.334] (EE) FBDEV(0): FBIOPUTCMAP: Invalid argument
[    15.334] (EE) FBDEV(0): FBIOPUTCMAP: Invalid argument
[    15.334] (EE) FBDEV(0): FBIOPUTCMAP: Invalid argument
[    15.334] (EE) FBDEV(0): FBIOPUTCMAP: Invalid argument
[    15.334] (EE) FBDEV(0): FBIOPUTCMAP: Invalid argument
[    15.334] (EE) FBDEV(0): FBIOPUTCMAP: Invalid argument
[    15.334] (EE) FBDEV(0): FBIOPUTCMAP: Invalid argument
[    15.334] (EE) FBDEV(0): FBIOPUTCMAP: Invalid argument
[    15.334] (EE) FBDEV(0): FBIOPUTCMAP: Invalid argument
[    15.334] (EE) FBDEV(0): FBIOPUTCMAP: Invalid argument
[    15.334] (EE) FBDEV(0): FBIOPUTCMAP: Invalid argument
[    15.334] (EE) FBDEV(0): FBIOPUTCMAP: Invalid argument
[    15.334] (EE) FBDEV(0): FBIOPUTCMAP: Invalid argument
[    15.335] (EE) FBDEV(0): FBIOPUTCMAP: Invalid argument
[    15.335] (EE) FBDEV(0): FBIOPUTCMAP: Invalid argument
[    15.335] (EE) FBDEV(0): FBIOPUTCMAP: Invalid argument
[    15.335] (EE) FBDEV(0): FBIOPUTCMAP: Invalid argument
[    15.335] (EE) FBDEV(0): FBIOPUTCMAP: Invalid argument
[    15.335] (==) FBDEV(0): DPMS enabled
[    15.335] (II) Initializing extension Generic Event Extension
[    15.335] (II) Initializing extension SHAPE
[    15.335] (II) Initializing extension MIT-SHM
[    15.335] (II) Initializing extension XInputExtension
[    15.338] (II) Initializing extension XTEST
[    15.338] (II) Initializing extension BIG-REQUESTS
[    15.338] (II) Initializing extension SYNC
[    15.338] (II) Initializing extension XKEYBOARD
[    15.338] (II) Initializing extension XC-MISC
[    15.338] (II) Initializing extension XFIXES
[    15.338] (II) Initializing extension RENDER
[    15.338] (II) Initializing extension RANDR
[    15.338] (II) Initializing extension COMPOSITE
[    15.338] (II) Initializing extension DAMAGE
[    15.338] (II) Initializing extension MIT-SCREEN-SAVER
[    15.338] (II) Initializing extension DOUBLE-BUFFER
[    15.339] (II) Initializing extension DPMS
[    15.339] (II) Initializing extension Present
[    15.339] (II) Initializing extension DRI3
[    15.339] (II) Initializing extension X-Resource
[    15.339] (II) Initializing extension XVideo
[    15.339] (II) Initializing extension XVideo-MotionCompensation
[    15.339] (II) Initializing extension GLX
[    15.339] (II) Initializing extension XFree86-VidModeExtension
[    15.339] (II) Initializing extension XFree86-DGA
[    15.339] (II) Initializing extension XFree86-DRI
[    15.339] (II) Initializing extension DRI2
[    15.678] (II) config/udev: Adding input device gpio_buttons@0

(/dev/input/event0)

[    15.678] (II) No input driver specified, ignoring this device.
[    15.678] (II) This device may have been added with another device file.

root@am335x-evm:~#

here is what in xorg.conf

root@am335x-evm:~# cat /etc/X11/xorg.conf

Section "Module"

Load "extmod"

Load "dbe"

Load "glx"

Load "freetype"

Load "type1"

Load "record"

Load "dri"

EndSection

Section "Monitor"

Identifier "Builtin Default Monitor"

EndSection

Section "Device"

Identifier "Builtin Default fbdev Device 0"

Driver "fbdev"

EndSection

Section "Screen"

Identifier "Builtin Default fbdev Screen 0"

Device "Builtin Default fbdev Device 0"

Monitor "Builtin Default Monitor"

EndSection

Section "ServerLayout"

Identifier "Builtin Default Layout"

Screen "Builtin Default fbdev Screen 0"

EndSection

root@am335x-evm:~#

root@am335x-evm:~# cat /usr/share/X11/xorg.conf.d/

10-evdev.conf 10-quirks.conf 40-libinput.conf

root@am335x-evm:~# cat /usr/share/X11/xorg.conf.d/

cat: read error: Is a directory

Nikola

*De :* Zoran Stojsavljevic <[email protected]> *Envoyé :* vendredi 12 avril 2019 06:05
*À :* Stanisavljevic <[email protected]> *Cc :* Yocto Project <[email protected]>; Marc Ferland < [email protected]>
*Objet :* Re: [yocto] yocto touchscreen

Hello Nikola,

I have here one non-important suggestion, for the starters:
Please, change kernel command line:

Quoted 1 line
[    0.000000] Kernel command line: console=ttyO0,115200

root=/dev/mmcblk0p2 rw

to: *console=ttyS0*,115200 root=/dev/mmcblk0p2 rw

According to:

Quoted 4 lines
[    0.000414] Console: colour dummy device 80x30
[    0.000440] WARNING: Your 'console=ttyO0' has been replaced by 'ttyS0'
[    0.000447] This ensures that you still see kernel messages. Please
[    0.000452] update your kernel commandline.

_______

Looking into:
(==) Log file: "/var/log/Xorg.0.log", Time: Thu Apr 11 15:41:31 2019 (==) Using config file: "/etc/X11/xorg.conf"
(==) Using system config directory "/usr/share/X11/xorg.conf.d"

Poky (Yocto Project Reference Distro) 2.6+snapshot am335x-evm /dev/ttyS0

am335x-evm login: The XKEYBOARD keymap compiler (xkbcomp) reports:

Quoted 5 lines

Warning: Unsupported high keycode 372 for name <I372> ignored

X11 cannot support keycodes above 255.

This warning only shows for the first high keycode.

*> Internal error: Could not resolve keysym XF86MonBrightnessCycle*

Errors from xkbcomp are not fatal to the X server

[   15.951736] random: dbus-daemon: uninitialized urandom read (12 bytes

read, 67 bits of entropy available)
D-BUS per-session daemon address is:
unix:abstract=/tmp/dbus-AntF8uRBJQ,guid=2087fb970fdb264af1e4e5315caf602b *Size 1024x768 not found in available modes*
*Error: No calibratable devices found.*
*matchbox: Cant find a keycode for keysym 269025056*
matchbox: ignoring key shortcut XF86Calendar=!$contacts *matchbox: Cant find a keycode for keysym 2809*
matchbox: ignoring key shortcut telephone=!$dates
*matchbox: Cant find a keycode for keysym 269025050*
matchbox: ignoring key shortcut XF86Start=!matchbox-remote -desktop
_______

Seems, that mode you have chosen somehow with your touch screen

driver is NOT supported (messages in *RED*).

Please, could you choose something supported (800x600) and see if

this will work for you (just as proof of concept/ad-hoc test)?

Maybe your driver does not support 1024x768 mode (could be!)?

*And, YES, calibration mode NOT to be performed could be FATAL!*

_______

For now, it is enough suggestions for exploring and trying by you.

You should have attached to your @ log Xorg.0.log message again, for

us to inspect the messages and try to determine where the failure is.

Zoran

_______

On Thu, Apr 11, 2019 at 5:58 PM Stanisavljevic <
[email protected]> wrote:

Hello Zoran,

I tried to change X.org X Server version

To do this I used yocto warrior version.

When I boot the system, it’s written that x.org X Server version is to 1.20.4

But I have the same problem as before, the touchscreen is completely locked and don’t react when I touch the screen.

Do you have an other idea where the problem is coming ?

Here I copy the boot log :

U-Boot SPL 2017.05-00001-g041a398 (May 02 2018 - 18:36:57)

Trying to boot from MMC1

reading uboot.env

reading u-boot.img

reading u-boot.img

reading u-boot.img

reading u-boot.img

U-Boot 2017.05-00001-g041a398 (May 02 2018 - 18:36:57 +0200)

CPU : AM335X-GP rev 2.1

Model: TI AM335x EVM-SK

DRAM: 256 MiB

NAND: 0 MiB

MMC: OMAP SD/MMC: 0, OMAP SD/MMC: 1

reading uboot.env

ERROR: No USB device found

at drivers/usb/gadget/ether.c:2709/usb_ether_init()

Net: CACHE: Misaligned operation at range [8df323c0, 8df32464]

Warning: ethernet@4a100000 using MAC address from ROM

eth0: ethernet@4a100000

Hit any key to stop autoboot: 0

reading zImage

3412752 bytes read in 251 ms (13 MiB/s)

reading dtb

39733 bytes read in 12 ms (3.2 MiB/s)

## Flattened Device Tree blob at 82000000

Booting using the fdt blob at 0x82000000

Loading Device Tree to 8df19000, end 8df25b34 ... OK

Starting kernel ...

[    0.000000] Booting Linux on physical CPU 0x0
[    0.000000] Initializing cgroup subsys cpu
[    0.000000] Initializing cgroup subsys cpuacct
[    0.000000] Linux version 4.4.19-ge581bb1cac
(polycaptil@polycaptil-HP-Notebo
                     ok) (gcc version 5.3.0 (GCC) ) #1 PREEMPT Thu May 24

11:42:17 CEST 2018

[    0.000000] CPU: ARMv7 Processor [413fc082] revision 2 (ARMv7),

cr=10c5387d

[    0.000000] CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing

instructio n cache

[    0.000000] Machine model: TI AM335x EVM-SK
[    0.000000] cma: Reserved 48 MiB at 0x8a800000
[    0.000000] Memory policy: Data cache writeback
[    0.000000] CPU: All CPU(s) started in SVC mode.
[    0.000000] AM335X ES2.1 (sgx neon )
[    0.000000] Built 1 zonelists in Zone order, mobility grouping on.

Total pag es: 64960

[    0.000000] Kernel command line: console=ttyO0,115200

root=/dev/mmcblk0p2 rw

[    0.000000] PID hash table entries: 1024 (order: 0, 4096 bytes)
[    0.000000] Dentry cache hash table entries: 32768 (order: 5, 131072

bytes)

[    0.000000] Inode-cache hash table entries: 16384 (order: 4, 65536

bytes)

[    0.000000] Memory: 200444K/262144K available (6495K kernel code, 313K

rwdata , 2368K rodata,
260K init, 265K bss, 12548K reserved, 49152K cma-reserved, 0K
hi ghmem)

[    0.000000] Virtual kernel memory layout:
[    0.000000]     vector  : 0xffff0000 - 0xffff1000   (   4 kB)
[    0.000000]     fixmap  : 0xffc00000 - 0xfff00000   (3072 kB)
[    0.000000]     vmalloc : 0xd0800000 - 0xff800000   ( 752 MB)
[    0.000000]     lowmem  : 0xc0000000 - 0xd0000000   ( 256 MB)
[    0.000000]     pkmap   : 0xbfe00000 - 0xc0000000   (   2 MB)
[    0.000000]     modules : 0xbf000000 - 0xbfe00000   (  14 MB)
[    0.000000]       .text : 0xc0008000 - 0xc08b0034   (8865 kB)
[    0.000000]       .init : 0xc08b1000 - 0xc08f2000   ( 260 kB)
[    0.000000]       .data : 0xc08f2000 - 0xc09407f0   ( 314 kB)
[    0.000000]        .bss : 0xc09407f0 - 0xc0982d58   ( 266 kB)
[    0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=1, Nodes=1
[    0.000000] Preemptible hierarchical RCU implementation.
[    0.000000]  Build-time adjustment of leaf fanout to 32.
[    0.000000] NR_IRQS:16 nr_irqs:16 16
[    0.000000] IRQ: Found an INTC at 0xfa200000 (revision 5.0) with 128

interrup ts

[    0.000000] OMAP clockevent source: timer2 at 24000000 Hz
[    0.000013] sched_clock: 32 bits at 24MHz, resolution 41ns, wraps every

89478 484971ns

[    0.000034] clocksource: timer1: mask: 0xffffffff max_cycles:

0xffffffff, max
_idle_ns: 79635851949 ns

[    0.000046] OMAP clocksource: timer1 at 24000000 Hz
[    0.000221] clocksource_probe: no matching clocksources found
[    0.000414] Console: colour dummy device 80x30
[    0.000440] WARNING: Your 'console=ttyO0' has been replaced by 'ttyS0'
[    0.000447] This ensures that you still see kernel messages. Please
[    0.000452] update your kernel commandline.
[    0.000471] Calibrating delay loop... 795.44 BogoMIPS (lpj=3977216)
[    0.089060] pid_max: default: 32768 minimum: 301
[    0.089190] Mount-cache hash table entries: 1024 (order: 0, 4096 bytes)
[    0.089201] Mountpoint-cache hash table entries: 1024 (order: 0, 4096

bytes)

[    0.089924] Initializing cgroup subsys io
[    0.089956] Initializing cgroup subsys memory
[    0.089996] Initializing cgroup subsys devices
[    0.090011] Initializing cgroup subsys freezer
[    0.090026] Initializing cgroup subsys perf_event
[    0.090038] Initializing cgroup subsys pids
[    0.090068] CPU: Testing write buffer coherency: ok
[    0.090493] Setting up static identity map for 0x80008200 - 0x80008258
[    0.092679] devtmpfs: initialized
[    0.105439] VFP support v0.3: implementor 41 architecture 3 part 30

variant c rev 3

[    0.120521] omap_hwmod: debugss: _wait_target_disable failed
[    0.175644] clocksource: jiffies: mask: 0xffffffff max_cycles:

0xffffffff, ma
x_idle_ns: 19112604462750000 ns

[    0.179890] pinctrl core: initialized pinctrl subsystem
[    0.181243] NET: Registered protocol family 16
[    0.183450] DMA: preallocated 256 KiB pool for atomic coherent

allocations

[    0.209057] cpuidle: using governor ladder
[    0.239046] cpuidle: using governor menu
[    0.243690] OMAP GPIO hardware version 0.1
[    0.254398] hw-breakpoint: debug architecture 0x4 unsupported.
[    0.297651] edma 49000000.edma: TI EDMA DMA engine driver
[    0.298633] reg-fixed-voltage fixedregulator@2: could not find pctldev

for no de
/ocp/l4_wkup@44c00000/scm@210000/pinmux@800/pinmux_wl12xx_gpio, deferring
pro be

[    0.302387] omap_i2c 44e0b000.i2c: could not find pctldev for node

/ocp/l4_wk up@44c00000
/scm@210000/pinmux@800/pinmux_i2c0_pins, deferring probe

[    0.302542] media: Linux media interface: v0.10
[    0.302605] Linux video capture interface: v2.00
[    0.302656] pps_core: LinuxPPS API ver. 1 registered
[    0.302664] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo

Giome tti <
[email protected]>

[    0.302694] PTP clock support registered
[    0.302758] EDAC MC: Ver: 3.0.0
[    0.303971] omap-mailbox 480c8000.mailbox: omap mailbox rev 0x400
[    0.304334] Advanced Linux Sound Architecture Driver Initialized.
[    0.305513] clocksource: Switched to clocksource timer1
[    0.316808] NET: Registered protocol family 2
[    0.317626] TCP established hash table entries: 2048 (order: 1, 8192

bytes)

[    0.317665] TCP bind hash table entries: 2048 (order: 1, 8192 bytes)
[    0.317693] TCP: Hash tables configured (established 2048 bind 2048)
[    0.317782] UDP hash table entries: 256 (order: 0, 4096 bytes)
[    0.317803] UDP-Lite hash table entries: 256 (order: 0, 4096 bytes)
[    0.317960] NET: Registered protocol family 1
[    0.318387] RPC: Registered named UNIX socket transport module.
[    0.318402] RPC: Registered udp transport module.
[    0.318409] RPC: Registered tcp transport module.
[    0.318415] RPC: Registered tcp NFSv4.1 backchannel transport module.
[    0.319367] hw perfevents: enabled with armv7_cortex_a8 PMU driver, 5

counter s available

[    0.321439] futex hash table entries: 256 (order: -1, 3072 bytes)
[    0.329858] squashfs: version 4.0 (2009/01/31) Phillip Lougher
[    0.330796] NFS: Registering the id_resolver key type
[    0.330874] Key type id_resolver registered
[    0.330882] Key type id_legacy registered
[    0.330960] ntfs: driver 2.1.32 [Flags: R/O].
[    0.334733] Block layer SCSI generic (bsg) driver version 0.4 loaded

(major 2 48)

[    0.334764] io scheduler noop registered
[    0.334778] io scheduler deadline registered
[    0.334936] io scheduler cfq registered (default)
[    0.336607] pinctrl-single 44e10800.pinmux: 142 pins at pa f9e10800

size 568

[    0.339467] backlight supply power not found, using dummy regulator
[    0.402551] Serial: 8250/16550 driver, 10 ports, IRQ sharing disabled
[    0.407008] 44e09000.serial: ttyS0 at MMIO 0x44e09000 (irq = 158,

base_baud = 3000000)
is a 8250

[    1.017402] console [ttyS0] enabled
[    1.022241] 48022000.serial: ttyS1 at MMIO 0x48022000 (irq = 159,

base_baud = 3000000)
is a 8250

[    1.032291] [drm] Initialized drm 1.1.0 20060810
[    1.039603] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
[    1.046388] [drm] No driver support for vblank timestamp query.
[    1.062150] Console: switching to colour frame buffer device 60x34
[    1.070379] tilcdc 4830e000.lcdc: fb0:  frame buffer device
[    1.105534] [drm] Initialized tilcdc 1.0.0 20121205 on minor 0
[    1.118627] loop: module loaded
[    1.124254] libphy: Fixed MDIO Bus: probed
[    1.185548] davinci_mdio 4a101000.mdio: davinci mdio revision 1.6
[    1.191692] davinci_mdio 4a101000.mdio: detected phy mask fffffffe
[    1.198739] libphy: 4a101000.mdio: probed
[    1.202836] davinci_mdio 4a101000.mdio: phy[0]: device

4a101000.mdio:00, driv
er SMSC LAN8710/LAN8720

[    1.212833] cpsw 4a100000.ethernet: Detected MACID = a0:f6:fd:4c:a6:ba
[    1.220460] cpsw 4a100000.ethernet: cpsw: Detected MACID =

c4:ed:ba:88:2a:92

[    1.229323] mousedev: PS/2 mouse device common for all mice
[    1.235803] i2c /dev entries driver
[    1.240462] cpuidle: enable-method property 'ti,am3352' found operations
[    1.248156] omap_hsmmc 48060000.mmc: Got CD GPIO
[    1.275714] pinctrl-single 44e10800.pinmux: bad data for mux

pinmux_mmc2_pins

[    1.282895] pinctrl-single 44e10800.pinmux: no pins entries for

pinmux_mmc2_p ins

[    1.317169] ledtrig-cpu: registered to indicate activity on CPUs
[    1.326062] NET: Registered protocol family 10
[    1.332076] sit: IPv6 over IPv4 tunneling driver
[    1.337708] NET: Registered protocol family 17
[    1.342503] Key type dns_resolver registered
[    1.347084] omap_voltage_late_init: Voltage driver support not added
[    1.407266] tps65910-rtc tps65910-rtc: rtc core: registered

tps65910-rtc as r tc0

[    1.415401] omap_i2c 44e0b000.i2c: bus 0 rev0.11 at 400 kHz
[    1.421798] omap_hsmmc 48060000.mmc: Got CD GPIO
[    1.426953] vmmc: supplied by vbat
[    1.466351] pinctrl-single 44e10800.pinmux: bad data for mux

pinmux_mmc2_pins

[    1.474750] pinctrl-single 44e10800.pinmux: no pins entries for

pinmux_mmc2_p ins

[    1.513248] mmc0: host does not support reading read-only switch,

assuming wr ite-enable

[    1.523416] mmc0: new high speed SDHC card at address 0001
[    1.529625] mmcblk0: mmc0:0001 AS 3.72 GiB
[    1.535990]  mmcblk0: p1 p2 p3
[    1.595934] vdd_mpu: supplied by vbat
[    1.602181] input: gpio_buttons@0 as /devices/platform/gpio_buttons@0/input/i
                    nput0
[    1.618321] tps65910-rtc tps65910-rtc: setting system clock to

2019-04-11 15: 41:17
UTC (1554997277)

[    1.639403] lis3_reg: disabling
[    1.655736] ALSA device list:
[    1.658725]   No soundcards found.
[    1.678270] EXT4-fs (mmcblk0p2): couldn't mount as ext3 due to feature

incomp atibilities

[    1.696893] EXT4-fs (mmcblk0p2): couldn't mount as ext2 due to feature

incomp atibilities

[    1.918459] EXT4-fs (mmcblk0p2): recovery complete
[    1.926817] EXT4-fs (mmcblk0p2): mounted filesystem with ordered data

mode. O pts: (null)

[    1.945553] VFS: Mounted root (ext4 filesystem) on device 179:2.
[    1.951741] devtmpfs: mounted
[    1.955142] Freeing unused kernel memory: 260K (c08b1000 - c08f2000)
[    1.975513] This architecture does not have kernel memory protection.

INIT: version 2.88 booting

Starting udev

[    2.626491] udevd[78]: starting version 3.2.7
[    2.632958] random: udevd: uninitialized urandom read (16 bytes read,

19 bits of entropy
available)

[    2.655617] random: udevd: uninitialized urandom read (16 bytes read,

19 bits of entropy
available)

[    2.675821] random: udevd: uninitialized urandom read (16 bytes read,

20 bits of entropy
available)

[    2.685085] random: udevd: uninitialized urandom read (16 bytes read,

20 bits of entropy
available)

[    2.730297] udevd[78]: specified group 'kvm' unknown
[    2.798310] udevd[79]: starting eudev-3.2.7
[    3.062517] random: udevd: uninitialized urandom read (16 bytes read,

23 bits of entropy
available)

[    3.095948] random: udevd: uninitialized urandom read (16 bytes read,

23 bits of entropy
available)

[    3.128747] udevd[79]: specified group 'kvm' unknown
[    4.544886] EXT4-fs (mmcblk0p2): re-mounted. Opts: data=ordered
[    5.086681] random: dd: uninitialized urandom read (512 bytes read, 36

bits o f entropy
available)

INIT: Entering runlevel: 5

Configuring network interfaces... [ 5.281526] net eth0: initializing
cpsw ver sion 1.12 (0)

[    5.286963] net eth0: initialized cpsw ale version 1.4
[    5.292126] net eth0: ALE Table size 1024
[    5.299577] net eth0: phy found : id is : 0x7c0f1
[    5.312916] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready

udhcpc: started, v1.30.1

udhcpc: sending discover

udhcpc: sending discover

udhcpc: sending discover

udhcpc: no lease, forking to background

done.

Starting system message bus: [ 14.818015] random: dbus-daemon:
uninitialized urandom read (12 bytes read, 53 bits of entropy available)

[   14.841904] random: dbus-daemon: uninitialized urandom read (12 bytes

read, 53 bits of entropy available)

dbus.

Starting Xserver

Starting syslogd/klogd:

done

X.Org X Server 1.20.4

X Protocol Version 11, Revision 0

Build Operating System: Linux 4.15.0-45-generic x86_64

Current Operating System: Linux am335x-evm 4.4.19-ge581bb1cac #1 PREEMPT Thu May 24 11:42:17 CEST 2018 armv7l

Kernel command line: console=ttyO0,115200 root=/dev/mmcblk0p2 rw

Build Date: 10 April 2019 08:15:46PM

Current version of pixman: 0.38.0

Before reporting problems, check http://wiki.x.org

to make sure that you have the latest version.

Markers: (--) probed, (**) from config file, (==) default setting,

(++) from command line, (!!) notice, (II) informational,

(WW) warning, (EE) error, (NI) not implemented, (??) unknown.

(==) Log file: "/var/log/Xorg.0.log", Time: Thu Apr 11 15:41:31 2019

(==) Using config file: "/etc/X11/xorg.conf"

(==) Using system config directory "/usr/share/X11/xorg.conf.d"

Poky (Yocto Project Reference Distro) 2.6+snapshot am335x-evm /dev/ttyS0

am335x-evm login: The XKEYBOARD keymap compiler (xkbcomp) reports:

Quoted 7 lines

Warning: Unsupported high keycode 372 for name <I372> ignored

X11 cannot support keycodes above 255.

This warning only shows for the first high keycode.

Internal error:   Could not resolve keysym XF86MonBrightnessCycle

Errors from xkbcomp are not fatal to the X server

[   15.951736] random: dbus-daemon: uninitialized urandom read (12 bytes

read, 67 bits of entropy available)

D-BUS per-session daemon address is:
unix:abstract=/tmp/dbus-AntF8uRBJQ,guid=2087fb970fdb264af1e4e5315caf602b

Size 1024x768 not found in available modes

Error: No calibratable devices found.

matchbox: Cant find a keycode for keysym 269025056

matchbox: ignoring key shortcut XF86Calendar=!$contacts

matchbox: Cant find a keycode for keysym 2809

matchbox: ignoring key shortcut telephone=!$dates

matchbox: Cant find a keycode for keysym 269025050

matchbox: ignoring key shortcut XF86Start=!matchbox-remote -desktop

dbus-daemon[282]: Activating service name='org.a11y.atspi.Registry' requested by ':1.0' (uid=0 pid=278 comm="matchbox-terminal ")

dbus-daemon[282]: Successfully activated service 'org.a11y.atspi.Registry'

SpiRegistry daemon is running with well-known name - org.a11y.atspi.Registry

[   41.825592] random: nonblocking pool is initialized

Nikola.

*De :* Zoran Stojsavljevic <[email protected]> *Envoyé :* lundi 8 avril 2019 08:07
*À :* Stanisavljevic <[email protected]> *Cc :* Yocto Project <[email protected]>; Marc Ferland < [email protected]>
*Objet :* Re: [yocto] yocto touchscreen

Hello Nikola,

I did some quick analysis of your kernel boot traces, and there are the following observations made:

[1] The kernel used is:
Linux version 4.4.19-ge581bb1cac (polycaptil@polycaptil-HP-Notebook) ?!

In my case (I built YOCTO thud for BBB NOT using X11, only serial console):
Linux version 4.19.7-jumpnow (oe-user@oe-host) (gcc version 8.2.0 (GCC))

I could not explain polycaptil@polycaptil-HP-Notebook, maybe you do it for such kind of platform...
The kernel used is too old, for my taste, you did not replaced it, if you built YOCTO thud!

[2] The kernel command line:

[    0.000000] Kernel command line: console=ttyO0,115200

root=/dev/mmcblk0p2 rw

Shows that you use EMMC as holder for / tree, all good.

[3] The concern about your console: console=ttyO0,115200 Is addressed here:

[    0.000441] WARNING: Your 'console=ttyO0' has been replaced by 'ttyS0'

Later followed by:

[    0.402495] Serial: 8250/16550 driver, 10 ports, IRQ sharing disabled
[    0.406968] 44e09000.serial: ttyS0 at MMIO 0x44e09000 (irq = 158,
base_baud = 3000000) is a 8250
[    1.017361] console [ttyS0] enabled
[    1.022188] 48022000.serial: ttyS1 at MMIO 0x48022000 (irq = 159,

base_baud = 3000000) is a 8250

So, not at all worries about the console!

[4] The following traces are worrying me very much:

Starting Xserver
Starting syslogd/klogd:
done
*X.Org X Server 1.20.1*
X Protocol Version 11, Revision 0
Build Operating System: Linux 4.15.0-45-generic x86_64 *Current Operating System: Linux am335x-evm 4.4.19-ge581bb1cac* #1 PREEMPT Thu May 24 11:42:17 CEST 2018 armv7l
Kernel command line: console=ttyO0,115200 root=/dev/mmcblk0p2 rw Build Date: 02 April 2019 07:35:10PM

As Marc wrote earlier:

Quoted 1 line

Looks like: https://bugzilla.redhat.com/show_bug.cgi?id=1650634

So, as I stated before: you should have in your build:

*X.Org Server 1.20.3! This is the main problem, seems!*

Zoran

_______

On Fri, Apr 5, 2019 at 3:35 PM Stanisavljevic <
[email protected]> wrote:

Hello Zoran,

I keep you in touch about the migration from sumo to thud to solve my problem of locked touchscreen.

I migrated from sumo to thud version, but nothing changed, the problem is the same, and I have same messages on boot as sumo version.

I looked that the x server have a configuration kernel command line (if I correctly understood), here is what is written :

Kernel command line: console=ttyO0,115200 root=/dev/mmcblk0p2 rw

But the kernel command line of poky is different, here is what is configured for poky kernel command line :

Poky (Yocto Project Reference Distro) 2.6.1 am335x-evm /dev/ttyS0

For the xserver it is ttyO0 and for poky it is ttyS0, maybe there is something wrong here which do problem for the touchscreen.

I put below (at end of this mail )the text which appear during the boot.

I think xorg-x11-server package 1.20.3 was not the problem in the previous yocto version (sumo)…

Best regards

Nikola

Here is the text that appear during the boot :

root@am335x-evm:~# CCCCCCCCCCCCCCCCCCCCCCCC

U-Boot SPL 2017.05-00001-g041a398 (May 02 2018 - 18:36:57)

Trying to boot from MMC1

reading uboot.env

reading u-boot.img

reading u-boot.img

reading u-boot.img

reading u-boot.img

U-Boot 2017.05-00001-g041a398 (May 02 2018 - 18:36:57 +0200)

CPU : AM335X-GP rev 2.1

Model: TI AM335x EVM-SK

DRAM: 256 MiB

NAND: 0 MiB

MMC: OMAP SD/MMC: 0, OMAP SD/MMC: 1

reading uboot.env

ERROR: No USB device found

at drivers/usb/gadget/ether.c:2709/usb_ether_init()

Net: CACHE: Misaligned operation at range [8df323c0, 8df32464]

Warning: ethernet@4a100000 using MAC address from ROM

eth0: ethernet@4a100000

Hit any key to stop autoboot: 0

reading zImage

3412752 bytes read in 252 ms (12.9 MiB/s)

reading dtb

39733 bytes read in 12 ms (3.2 MiB/s)

## Flattened Device Tree blob at 82000000

Booting using the fdt blob at 0x82000000

Loading Device Tree to 8df19000, end 8df25b34 ... OK

Starting kernel ...

[    0.000000] Booting Linux on physical CPU 0x0
[    0.000000] Initializing cgroup subsys cpu
[    0.000000] Initializing cgroup subsys cpuacct
[    0.000000] Linux version 4.4.19-ge581bb1cac

(polycaptil@polycaptil-HP-Notebook) (gcc version 5.3.0 (GCC) ) #1 PREEMPT Thu May 24 11:42:17 CEST 2018

[    0.000000] CPU: ARMv7 Processor [413fc082] revision 2 (ARMv7),

cr=10c5387d

[    0.000000] CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing

instruction cache

[    0.000000] Machine model: TI AM335x EVM-SK
[    0.000000] cma: Reserved 48 MiB at 0x8a800000
[    0.000000] Memory policy: Data cache writeback
[    0.000000] CPU: All CPU(s) started in SVC mode.
[    0.000000] AM335X ES2.1 (sgx neon )
[    0.000000] Built 1 zonelists in Zone order, mobility grouping on.

Total pages: 64960

[    0.000000] Kernel command line: console=ttyO0,115200

root=/dev/mmcblk0p2 rw

[    0.000000] PID hash table entries: 1024 (order: 0, 4096 bytes)
[    0.000000] Dentry cache hash table entries: 32768 (order: 5, 131072

bytes)

[    0.000000] Inode-cache hash table entries: 16384 (order: 4, 65536

bytes)

[    0.000000] Memory: 200444K/262144K available (6495K kernel code, 313K

rwdata, 2368K rodata, 260K init, 265K bss, 12548K reserved, 49152K cma-reserved, 0K highmem)

[    0.000000] Virtual kernel memory layout:
[    0.000000]     vector  : 0xffff0000 - 0xffff1000   (   4 kB)
[    0.000000]     fixmap  : 0xffc00000 - 0xfff00000   (3072 kB)
[    0.000000]     vmalloc : 0xd0800000 - 0xff800000   ( 752 MB)
[    0.000000]     lowmem  : 0xc0000000 - 0xd0000000   ( 256 MB)
[    0.000000]     pkmap   : 0xbfe00000 - 0xc0000000   (   2 MB)
[    0.000000]     modules : 0xbf000000 - 0xbfe00000   (  14 MB)
[    0.000000]       .text : 0xc0008000 - 0xc08b0034   (8865 kB)
[    0.000000]       .init : 0xc08b1000 - 0xc08f2000   ( 260 kB)
[    0.000000]       .data : 0xc08f2000 - 0xc09407f0   ( 314 kB)
[    0.000000]        .bss : 0xc09407f0 - 0xc0982d58   ( 266 kB)
[    0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=1, Nodes=1
[    0.000000] Preemptible hierarchical RCU implementation.
[    0.000000]  Build-time adjustment of leaf fanout to 32.
[    0.000000] NR_IRQS:16 nr_irqs:16 16
[    0.000000] IRQ: Found an INTC at 0xfa200000 (revision 5.0) with 128

interrupts

[    0.000000] OMAP clockevent source: timer2 at 24000000 Hz
[    0.000016] sched_clock: 32 bits at 24MHz, resolution 41ns, wraps every

89478484971ns

[    0.000036] clocksource: timer1: mask: 0xffffffff max_cycles:

0xffffffff, max_idle_ns: 79635851949 ns

[    0.000047] OMAP clocksource: timer1 at 24000000 Hz
[    0.000222] clocksource_probe: no matching clocksources found
[    0.000415] Console: colour dummy device 80x30
[    0.000441] WARNING: Your 'console=ttyO0' has been replaced by 'ttyS0'
[    0.000447] This ensures that you still see kernel messages. Please
[    0.000453] update your kernel commandline.
[    0.000473] Calibrating delay loop... 795.44 BogoMIPS (lpj=3977216)
[    0.089067] pid_max: default: 32768 minimum: 301
[    0.089198] Mount-cache hash table entries: 1024 (order: 0, 4096 bytes)
[    0.089210] Mountpoint-cache hash table entries: 1024 (order: 0, 4096

bytes)

[    0.089932] Initializing cgroup subsys io
[    0.089965] Initializing cgroup subsys memory
[    0.090003] Initializing cgroup subsys devices
[    0.090020] Initializing cgroup subsys freezer
[    0.090035] Initializing cgroup subsys perf_event
[    0.090047] Initializing cgroup subsys pids
[    0.090074] CPU: Testing write buffer coherency: ok
[    0.090499] Setting up static identity map for 0x80008200 - 0x80008258
[    0.092669] devtmpfs: initialized
[    0.105440] VFP support v0.3: implementor 41 architecture 3 part 30

variant c rev 3

[    0.120496] omap_hwmod: debugss: _wait_target_disable failed
[    0.175552] clocksource: jiffies: mask: 0xffffffff max_cycles:

0xffffffff, max_idle_ns: 19112604462750000 ns

[    0.179889] pinctrl core: initialized pinctrl subsystem
[    0.181246] NET: Registered protocol family 16
[    0.183446] DMA: preallocated 256 KiB pool for atomic coherent

allocations

[    0.209067] cpuidle: using governor ladder
[    0.239055] cpuidle: using governor menu
[    0.243662] OMAP GPIO hardware version 0.1
[    0.254349] hw-breakpoint: debug architecture 0x4 unsupported.
[    0.297650] edma 49000000.edma: TI EDMA DMA engine driver
[    0.298630] reg-fixed-voltage fixedregulator@2: could not find pctldev

for node /ocp/l4_wkup@44c00000/scm@210000/pinmux@800/pinmux_wl12xx_gpio, deferring probe

[    0.302384] omap_i2c 44e0b000.i2c: could not find pctldev for node

/ocp/l4_wkup@44c00000/scm@210000/pinmux@800/pinmux_i2c0_pins, deferring probe

[    0.302543] media: Linux media interface: v0.10
[    0.302609] Linux video capture interface: v2.00
[    0.302660] pps_core: LinuxPPS API ver. 1 registered
[    0.302668] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo

Giometti <[email protected]>

[    0.302699] PTP clock support registered
[    0.302764] EDAC MC: Ver: 3.0.0
[    0.303981] omap-mailbox 480c8000.mailbox: omap mailbox rev 0x400
[    0.304343] Advanced Linux Sound Architecture Driver Initialized.
[    0.305508] clocksource: Switched to clocksource timer1
[    0.316757] NET: Registered protocol family 2
[    0.317569] TCP established hash table entries: 2048 (order: 1, 8192

bytes)

[    0.317608] TCP bind hash table entries: 2048 (order: 1, 8192 bytes)
[    0.317636] TCP: Hash tables configured (established 2048 bind 2048)
[    0.317718] UDP hash table entries: 256 (order: 0, 4096 bytes)
[    0.317738] UDP-Lite hash table entries: 256 (order: 0, 4096 bytes)
[    0.317898] NET: Registered protocol family 1
[    0.318323] RPC: Registered named UNIX socket transport module.
[    0.318337] RPC: Registered udp transport module.
[    0.318344] RPC: Registered tcp transport module.
[    0.318350] RPC: Registered tcp NFSv4.1 backchannel transport module.
[    0.319303] hw perfevents: enabled with armv7_cortex_a8 PMU driver, 5

counters available

[    0.321370] futex hash table entries: 256 (order: -1, 3072 bytes)
[    0.329774] squashfs: version 4.0 (2009/01/31) Phillip Lougher
[    0.330714] NFS: Registering the id_resolver key type
[    0.330792] Key type id_resolver registered
[    0.330801] Key type id_legacy registered
[    0.330881] ntfs: driver 2.1.32 [Flags: R/O].
[    0.334651] Block layer SCSI generic (bsg) driver version 0.4 loaded

(major 248)

[    0.334684] io scheduler noop registered
[    0.334698] io scheduler deadline registered
[    0.334855] io scheduler cfq registered (default)
[    0.336527] pinctrl-single 44e10800.pinmux: 142 pins at pa f9e10800

size 568

[    0.339377] backlight supply power not found, using dummy regulator
[    0.402495] Serial: 8250/16550 driver, 10 ports, IRQ sharing disabled
[    0.406968] 44e09000.serial: ttyS0 at MMIO 0x44e09000 (irq = 158,

base_baud = 3000000) is a 8250

[    1.017361] console [ttyS0] enabled
[    1.022188] 48022000.serial: ttyS1 at MMIO 0x48022000 (irq = 159,

base_baud = 3000000) is a 8250

[    1.032233] [drm] Initialized drm 1.1.0 20060810
[    1.039551] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
[    1.046337] [drm] No driver support for vblank timestamp query.
[    1.062083] Console: switching to colour frame buffer device 60x34
[    1.070316] tilcdc 4830e000.lcdc: fb0:  frame buffer device
[    1.105532] [drm] Initialized tilcdc 1.0.0 20121205 on minor 0
[    1.118602] loop: module loaded
[    1.124221] libphy: Fixed MDIO Bus: probed
[    1.185547] davinci_mdio 4a101000.mdio: davinci mdio revision 1.6
[    1.191690] davinci_mdio 4a101000.mdio: detected phy mask fffffffe
[    1.198754] libphy: 4a101000.mdio: probed
[    1.202851] davinci_mdio 4a101000.mdio: phy[0]: device

4a101000.mdio:00, driver SMSC LAN8710/LAN8720

[    1.212830] cpsw 4a100000.ethernet: Detected MACID = a0:f6:fd:4c:a6:ba
[    1.220461] cpsw 4a100000.ethernet: cpsw: Detected MACID =

c4:ed:ba:88:2a:92

[    1.229313] mousedev: PS/2 mouse device common for all mice
[    1.235792] i2c /dev entries driver
[    1.240448] cpuidle: enable-method property 'ti,am3352' found operations
[    1.248143] omap_hsmmc 48060000.mmc: Got CD GPIO
[    1.275713] pinctrl-single 44e10800.pinmux: bad data for mux

pinmux_mmc2_pins

[    1.282895] pinctrl-single 44e10800.pinmux: no pins entries for

pinmux_mmc2_pins

[    1.317167] ledtrig-cpu: registered to indicate activity on CPUs
[    1.326065] NET: Registered protocol family 10
[    1.332086] sit: IPv6 over IPv4 tunneling driver
[    1.337713] NET: Registered protocol family 17
[    1.342528] Key type dns_resolver registered
[    1.347114] omap_voltage_late_init: Voltage driver support not added
[    1.407191] tps65910-rtc tps65910-rtc: rtc core: registered

tps65910-rtc as rtc0

[    1.415327] omap_i2c 44e0b000.i2c: bus 0 rev0.11 at 400 kHz
[    1.421710] omap_hsmmc 48060000.mmc: Got CD GPIO
[    1.426857] vmmc: supplied by vbat
[    1.466348] pinctrl-single 44e10800.pinmux: bad data for mux

pinmux_mmc2_pins

[    1.474748] pinctrl-single 44e10800.pinmux: no pins entries for

pinmux_mmc2_pins

[    1.513242] mmc0: host does not support reading read-only switch,

assuming write-enable

[    1.523406] mmc0: new high speed SDHC card at address 0001
[    1.529619] mmcblk0: mmc0:0001 AS 3.72 GiB
[    1.535970]  mmcblk0: p1 p2 p3
[    1.595927] vdd_mpu: supplied by vbat
[    1.602118] input: gpio_buttons@0 as /devices/platform/gpio_buttons@0

/input/input0

[    1.618310] tps65910-rtc tps65910-rtc: setting system clock to
2019-04-03 08:25:12 UTC (1554279912)
[    1.639397] lis3_reg: disabling
[    1.655734] ALSA device list:
[    1.658723]   No soundcards found.
[    1.678283] EXT4-fs (mmcblk0p2): couldn't mount as ext3 due to feature

incompatibilities

[    1.696903] EXT4-fs (mmcblk0p2): couldn't mount as ext2 due to feature

incompatibilities

[    1.792693] EXT4-fs (mmcblk0p2): recovery complete
[    1.807446] EXT4-fs (mmcblk0p2): mounted filesystem with ordered data

mode. Opts: (null)

[    1.821463] VFS: Mounted root (ext4 filesystem) on device 179:2.
[    1.835669] devtmpfs: mounted
[    1.839073] Freeing unused kernel memory: 260K (c08b1000 - c08f2000)
[    1.851956] This architecture does not have kernel memory protection.

INIT: version 2.88 booting

Starting udev

[    2.513624] udevd[78]: starting version 3.2.5
[    2.527632] random: udevd: uninitialized urandom read (16 bytes read,

18 bits of entropy available)

[    2.546992] random: udevd: uninitialized urandom read (16 bytes read,

18 bits of entropy available)

[    2.566829] random: udevd: uninitialized urandom read (16 bytes read,

18 bits of entropy available)

[    2.585755] random: udevd: uninitialized urandom read (16 bytes read,

18 bits of entropy available)

[    2.668211] udevd[79]: starting eudev-3.2.5
[    3.036159] random: udevd: uninitialized urandom read (16 bytes read,

21 bits of entropy available)

[    3.061761] random: udevd: uninitialized urandom read (16 bytes read,

21 bits of entropy available)

[    4.494682] EXT4-fs (mmcblk0p2): re-mounted. Opts: data=ordered
[    5.052098] random: dd: uninitialized urandom read (512 bytes read, 34

bits of entropy available)

INIT: Entering runlevel: 5

Configuring network interfaces... [ 5.254308] net eth0: initializing
cpsw version 1.12 (0)

[    5.259812] net eth0: initialized cpsw ale version 1.4
[    5.264976] net eth0: ALE Table size 1024
[    5.272411] net eth0: phy found : id is : 0x7c0f1
[    5.285702] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready

udhcpc: started, v1.29.2

udhcpc: sending discover

udhcpc: sending discover

udhcpc: sending discover

udhcpc: no lease, forking to background

done.

Starting system message bus: [ 14.793334] random: dbus-daemon:
uninitialized urandom read (12 bytes read, 51 bits of entropy available)

[   14.831748] random: dbus-daemon: uninitialized urandom read (12 bytes

read, 52 bits of entropy available)

dbus.

Starting Xserver

Starting syslogd/klogd:

done

X.Org X Server 1.20.1

X Protocol Version 11, Revision 0

Build Operating System: Linux 4.15.0-45-generic x86_64

Current Operating System: Linux am335x-evm 4.4.19-ge581bb1cac #1 PREEMPT Thu May 24 11:42:17 CEST 2018 armv7l

Kernel command line: console=ttyO0,115200 root=/dev/mmcblk0p2 rw

Build Date: 02 April 2019 07:35:10PM

Current version of pixman: 0.34.0

Before reporting problems, check http://wiki.x.org

to make sure that you have the latest version.

Markers: (--) probed, (**) from config file, (==) default setting,

(++) from command line, (!!) notice, (II) informational,

(WW) warning, (EE) error, (NI) not implemented, (??) unknown.

(==) Log file: "/var/log/Xorg.0.log", Time: Wed Apr 3 08:25:25 2019

(==) Using config file: "/etc/X11/xorg.conf"

(==) Using system config directory "/usr/share/X11/xorg.conf.d"

Poky (Yocto Project Reference Distro) 2.6.1 am335x-evm /dev/ttyS0

am335x-evm login: The XKEYBOARD keymap compiler (xkbcomp) reports:

Quoted 5 lines

Warning: Unsupported high keycode 372 for name <I372> ignored

X11 cannot support keycodes above 255.

This warning only shows for the first high keycode.

Errors from xkbcomp are not fatal to the X server

[   15.888959] random: dbus-daemon: uninitialized urandom read (12 bytes

read, 65 bits of entropy available)

D-BUS per-session daemon address is:
unix:abstract=/tmp/dbus-JjEW6Wgjtx,guid=87af020e5c6f1a7e21d449e55ca46df5

Size 1024x768 not found in available modes

Error: No calibratable devices found.

matchbox: Cant find a keycode for keysym 269025056

matchbox: ignoring key shortcut XF86Calendar=!$contacts

matchbox: Cant find a keycode for keysym 2809

matchbox: ignoring key shortcut telephone=!$dates

matchbox: Cant find a keycode for keysym 269025050

matchbox: ignoring key shortcut XF86Start=!matchbox-remote -desktop

Failed to launch bus: Failed to execute child process ?/usr/bin? (Permission denied)

(matchbox-terminal:274): dbind-WARNING **: 08:25:27.404: Error retrieving accessibility bus address: org.a11y.Bus.Error: Failed to execute child process ?/usr/bin? (Permission denied)

[   43.718127] random: nonblocking pool is initialized

*De :* Stanisavljevic <[email protected]> *Envoyé :* lundi 18 février 2019 15:27
*À :* 'Zoran Stojsavljevic' <[email protected]> *Cc :* 'Yocto Project' <[email protected]>; 'Marc Ferland' < [email protected]>
*Objet :* RE: [yocto] yocto touchscreen

Hello Zoran

I will try these 2 ways.

Of course, the second way is the easiest, but I will try also the first way only to see if it is possible.

I will keep you in touch if the first way can work.

Best regards,

Nikola

*De :* Zoran Stojsavljevic <[email protected]> *Envoyé :* lundi 18 février 2019 15:21
*À :* Stanisavljevic <[email protected]> *Cc :* Yocto Project <[email protected]>; Marc Ferland < [email protected]>
*Objet :* Re: [yocto] yocto touchscreen

Hello Nikola,

Two things, which immediately came to my mind:

[1 - Harder way] Either to change xorg-x11-server in sumo to match at least xorg-x11-server *1.20.3;*

(harder way, since few people know exact dependencies among various
GFX packages, and what

and how many packages need to be also changed to make
xorg-x11-server 1.20.3 to work)

[2 - Easier Way] Either to migrate YOCTO to Thud, where the correct xorg-x11-server package 1.20.3

is already fixed and set!

(easier way, since exact dependencies among various GFX packages are
already set for 1.20.3)

Best Regards,

Zoran

_______

On Mon, Feb 18, 2019 at 2:48 PM Stanisavljevic <
[email protected]> wrote:

Thank you Zoran for trying to help me.
I tried to resolve the problem, but I didn’t succeed yet, I think I will to continue, and If after some time I find nothing, I’m going to migrate to the thud version.

I will maybe try to use Bugzilla

Nikola

*De :* Zoran Stojsavljevic <[email protected]> *Envoyé :* mardi 5 février 2019 19:28
*À :* Stanisavljevic <[email protected]>
*Cc :* Yocto Project <[email protected]>; [email protected] *Objet :* Re: [yocto] yocto touchscreen

Hello Nikola,

Let us try to cut to the chase!

After reading what Marc Ferland says/writes, and looking into the following:
https://bugzilla.redhat.com/show_bug.cgi?id=1650634

I have spotted the following:

*Pat Riehecky* *2018-11-20 14:28:22 UTC*

*the bug remains with the elrepo kernels:kernel-ml-4.19.2-1.el7.elrepo.x86_64kernel-lt-4.4.163-1.el7.elrepo.x86_64*

I never had this problem since I do not use Xorg (GFX), rather I only

use serial console from VBox VM from my BBB (pass-through).

Thus, my suggestion for you, to skip the whole mess is to rebuild your

distro *in the light of YOCTO Project 2.6.1 (thud 20.0.0.1).*

My best guess (then you'll inherit YOCTO kernel 4.20.x with fixed Xorg - X11).

I am using Fedora 29 on my laptop. Also from the bugzilla:

*Pat Riehecky* *2018-11-20 15:46:11 UTC *

*Bug resolved by rebuilding xorg-x11-server-1.20.3-1.fc29 [1] for 7.6.*

*With this in mind it appears to be an Xorg server bug rather than fbdev.*

From my HP EliteBook 840 G1 Fedora 29, Xorg.0.log - February 5th, 2019.,

I have the following:

[    26.955] Kernel command line: BOOT_IMAGE=/

*vmlinuz-4.20.6-200.fc29.x86_64*

root=/dev/mapper/fedora-root ro rd.lvm.lv=fedora/root rd.lvm.lv=fedora/swap rhgb

quiet LANG=en_US.UTF-8

[    26.955] Build Date: 11 January 2019  12:47:38PM
*[    26.955] Build ID: xorg-x11-server 1.20.3-3.fc29*
[    26.955] Current version of pixman: 0.34.0

Best Regards,
Zoran
_______

Quoted 10 lines · Zoran Stojsavljevic

Hello Nikola,

Quoted 5 lines

I created a kernel recipe with a bbappend file, and, I added the same defconfig that I used for krogoth version. The bbappend for kernel recipe concern meta-ti layer. I didn't edited defconfig file in other layers which contain a kernel recipe.

It could be some problem that Sumo does not take your bbappend file into

the

Quoted 5 lines

consideration as placed.

It could be something else, as well.

I have the same issue with my defconfig file for my Thud Beagle Bone

Black (BBB)

Quoted 1 line

standard board. Every time I recompile my YOCTO for it for different

releases, I need

Quoted 1 line

to import my specific defconfig. But I use complete different repos for

my standard

Quoted 11 lines

Beagle Bone Black than YOCTO BBB Poky reference distro.

Here is what I use in Thud (my bblayers.conf):

POKY_BBLAYERS_CONF_VERSION = "2"
BBPATH = "${TOPDIR}"
BBFILES ?= ""

BBLAYERS ?= " \
    /home/user/projects2/beaglebone-black/yocto-thud/meta-bbb \

/home/user/projects2/beaglebone-black/yocto-thud/meta-openembedded/meta-networking \

Quoted 1 line

/home/user/projects2/beaglebone-black/yocto-thud/meta-openembedded/meta-oe \

Quoted 1 line

/home/user/projects2/beaglebone-black/yocto-thud/meta-openembedded/meta-python \

Quoted 5 lines
    /home/user/projects2/beaglebone-black/yocto-thud/meta-qt5 \
    /home/user/projects2/beaglebone-black/yocto-thud/poky/meta \
    /home/user/projects2/beaglebone-black/yocto-thud/poky/meta-poky"

There, I replace defconfig in this layer:

/home/user/projects2/beaglebone-black/yocto-thud/meta-bbb

Quoted 4 lines

with my own defconfig.

In the directory:

/home/user/projects2/beaglebone-black/yocto-thud/meta-bbb/recipes-kernel/linux/linux-stable-4.19/beaglebone

Quoted 2 lines

If you use only Poky repository, then you need to read the following

paragraph (how to use

Quoted 3 lines

your defconfig with Poky):

[2.3.3. Changing the Configuration] YOCTO Project Linux Development

Manual

Quoted 1 line

https://www.yoctoproject.org/docs/2.5/kernel-dev/kernel-dev.html#using-an-in-tree-defconfig-file

Quoted 9 lines

2.3.3. Changing the Configuration

I hope this will help. Please, keep us posted!

Zoran
_______

On Tue, Feb 5, 2019 at 10:54 AM Stanisavljevic <

Quoted 6 lines · [email protected]> wrote:
Quoted 6 lines

Hy Zoran

Thank's to take time to answer

I created a kernel recipe with a bbappend file, and, I added the same

defconfig that I used for krogoth version.

Quoted 2 lines
Quoted 2 lines

The bbappend for kernel recipe concern meta-ti layer.
I didn't edited defconfig file in other layers which contain a kernel

recipe.

Quoted 2 lines
Quoted 2 lines

I think it's a problem which concern the screen resolution, screen

frequency and adc touchscreen.

Quoted 1 line
Quoted 1 line

Something is different between the krogoth and sumo version, but I

didn't find what is changed...

Quoted 3 lines
Quoted 3 lines

Xrandr show that problem is maybe around the screen resolution. It's show the next message : "Size 1024x768 not found in available

modes"

Quoted 1 line
Quoted 1 line

Maybe it was changed between krogoth and sumo version...but I don't

know where it is indicated if sources files...

Quoted 2 lines
Quoted 2 lines

What do you think ? problem can be around the screen resolution, screen

frequency and adc touchscreen ?

Quoted 11 lines
Quoted 11 lines

Nikola

-----Message d'origine-----
De : Zoran Stojsavljevic <[email protected]> Envoyé : lundi 4 février 2019 17:08
À : Stanisavljevic <[email protected]> Cc : Yocto Project <[email protected]> Objet : Re: [yocto] yocto touchscreen

Quoted 1 line

I built a first version of this os with version krogoth and it works

fine.

Quoted 13 lines
Quoted 13 lines
Quoted 4 lines

Now I build a second version of this os with version sumo and the touch screen works fine during boot process but when kernel is loaded, touchscreen freeze / lock and impossible to use it.

Did you compare Krogoth kernel defconfig with Sumo kernel defconfig?

May there are some mismatches in drivers' setup between these two?

Zoran
_______

On Mon, Feb 4, 2019 at 12:24 PM Stanisavljevic <

Quoted 9 lines · [email protected]> wrote:
Quoted 9 lines
Quoted 9 lines

Hy Team,

I have a problem

Quoted 5 lines
Quoted 5 lines
Quoted 5 lines

I buid a custom os for AM335x processor and I used yocto to do it.

I build a first version of this os with version krogoth and it work

fine.

Quoted 4 lines
Quoted 4 lines
Quoted 4 lines

Now I build a second version of this os with version sumo and the

touchscreen work fine during boot process but when kernel is loaded, touchscreen freeze / lock and impossible to use it.

Quoted 2 lines
Quoted 2 lines
Quoted 2 lines

The terminal is printed on the touchscreen but the screen is locked,

impossible to write a command or to move the mouse to select, ….

Quoted 4 lines
Quoted 4 lines
Quoted 4 lines

Here is the log of boot to the user session (log got with serial

communication between PC and board) :

Quoted 73 lines
Quoted 73 lines
Quoted 73 lines

U-Boot SPL 2017.05-00001-g041a398 (May 02 2018 - 18:36:57)

Trying to boot from MMC1

reading uboot.env

reading u-boot.img

reading u-boot.img

reading u-boot.img

reading u-boot.img

U-Boot 2017.05-00001-g041a398 (May 02 2018 - 18:36:57 +0200)

CPU : AM335X-GP rev 2.1

Model: TI AM335x EVM-SK

DRAM: 256 MiB

NAND: 0 MiB

MMC: OMAP SD/MMC: 0, OMAP SD/MMC: 1

reading uboot.env

ERROR: No USB device found

at drivers/usb/gadget/ether.c:2709/usb_ether_init()

Net: CACHE: Misaligned operation at range [8df323c0, 8df32464]

Warning: ethernet@4a100000 using MAC address from ROM

eth0: ethernet@4a100000

Hit any key to stop autoboot: 0

reading zImage

3412752 bytes read in 251 ms (13 MiB/s)

reading dtb

39733 bytes read in 12 ms (3.2 MiB/s)

## Flattened Device Tree blob at 82000000

Booting using the fdt blob at 0x82000000

Loading Device Tree to 8df19000, end 8df25b34 ... OK

Starting kernel ...

Quoted 7 lines
Quoted 7 lines
Quoted 7 lines
[    0.000000] Booting Linux on physical CPU 0x0
[    0.000000] Initializing cgroup subsys cpu
[    0.000000] Initializing cgroup subsys cpuacct
[    0.000000] Linux version 4.4.19-ge581bb1cac

(polycaptil@polycaptil-HP-Notebook) (gcc version 5.3.0 (GCC) ) #1 PREEMPT Thu May 24 11:42:17 CEST 2018

Quoted 2 lines
Quoted 2 lines
Quoted 2 lines
[    0.000000] CPU: ARMv7 Processor [413fc082] revision 2 (ARMv7),

cr=10c5387d

Quoted 2 lines
Quoted 2 lines
Quoted 2 lines
[    0.000000] CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing

instruction cache

Quoted 5 lines
Quoted 5 lines
Quoted 5 lines
[    0.000000] Machine model: TI AM335x EVM-SK
[    0.000000] cma: Reserved 48 MiB at 0x8a800000
Quoted 7 lines
Quoted 7 lines
Quoted 7 lines
[    0.000000] Memory policy: Data cache writeback
[    0.000000] CPU: All CPU(s) started in SVC mode.
[    0.000000] AM335X ES2.1 (sgx neon )
[    0.000000] Built 1 zonelists in Zone order, mobility grouping

on. Total pages: 64960

Quoted 2 lines
Quoted 2 lines
Quoted 2 lines
[    0.000000] Kernel command line: console=ttyO0,115200

root=/dev/mmcblk0p3 rw

Quoted 4 lines
Quoted 4 lines
Quoted 4 lines
[    0.000000] PID hash table entries: 1024 (order: 0, 4096 bytes)
[    0.000000] Dentry cache hash table entries: 32768 (order: 5,

131072 bytes)

Quoted 2 lines
Quoted 2 lines
Quoted 2 lines
[    0.000000] Inode-cache hash table entries: 16384 (order: 4, 65536

bytes)

Quoted 2 lines
Quoted 2 lines
Quoted 2 lines
[    0.000000] Memory: 200444K/262144K available (6495K kernel code,

313K rwdata, 2368K rodata, 260K init, 265K bss, 12548K reserved, 49152K cma-reserved, 0K highmem)

Quoted 17 lines
Quoted 17 lines
Quoted 17 lines
[    0.000000] Virtual kernel memory layout:
[    0.000000]     vector  : 0xffff0000 - 0xffff1000   (   4 kB)
[    0.000000]     fixmap  : 0xffc00000 - 0xfff00000   (3072 kB)
[    0.000000]     vmalloc : 0xd0800000 - 0xff800000   ( 752 MB)
[    0.000000]     lowmem  : 0xc0000000 - 0xd0000000   ( 256 MB)
[    0.000000]     pkmap   : 0xbfe00000 - 0xc0000000   (   2 MB)
[    0.000000]     modules : 0xbf000000 - 0xbfe00000   (  14 MB)
[    0.000000]       .text : 0xc0008000 - 0xc08b0034   (8865 kB)
Quoted 7 lines
Quoted 7 lines
Quoted 7 lines
[    0.000000]       .init : 0xc08b1000 - 0xc08f2000   ( 260 kB)
[    0.000000]       .data : 0xc08f2000 - 0xc09407f0   ( 314 kB)
[    0.000000]        .bss : 0xc09407f0 - 0xc0982d58   ( 266 kB)
[    0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=1,

Nodes=1

Quoted 8 lines
Quoted 8 lines
Quoted 8 lines
[    0.000000] Preemptible hierarchical RCU implementation.
[    0.000000]  Build-time adjustment of leaf fanout to 32.
[    0.000000] NR_IRQS:16 nr_irqs:16 16
[    0.000000] IRQ: Found an INTC at 0xfa200000 (revision 5.0) with

128 interrupts

Quoted 4 lines
Quoted 4 lines
Quoted 4 lines
[    0.000000] OMAP clockevent source: timer2 at 24000000 Hz
[    0.000015] sched_clock: 32 bits at 24MHz, resolution 41ns, wraps

every 89478484971ns

Quoted 2 lines
Quoted 2 lines
Quoted 2 lines
[    0.000036] clocksource: timer1: mask: 0xffffffff max_cycles:

0xffffffff, max_idle_ns: 79635851949 ns

Quoted 8 lines
Quoted 8 lines
Quoted 8 lines
[    0.000047] OMAP clocksource: timer1 at 24000000 Hz
[    0.000222] clocksource_probe: no matching clocksources found
[    0.000415] Console: colour dummy device 80x30
[    0.000442] WARNING: Your 'console=ttyO0' has been replaced by

'ttyS0'

Quoted 10 lines
Quoted 10 lines
Quoted 10 lines
[    0.000448] This ensures that you still see kernel messages. Please
[    0.000454] update your kernel commandline.
[    0.000473] Calibrating delay loop... 795.44 BogoMIPS (lpj=3977216)
[    0.089064] pid_max: default: 32768 minimum: 301
[    0.089193] Mount-cache hash table entries: 1024 (order: 0, 4096

bytes)

Quoted 2 lines
Quoted 2 lines
Quoted 2 lines
[    0.089205] Mountpoint-cache hash table entries: 1024 (order: 0,

4096 bytes)

Quoted 9 lines
Quoted 9 lines
Quoted 9 lines
[    0.089932] Initializing cgroup subsys io
[    0.089964] Initializing cgroup subsys memory
[    0.090005] Initializing cgroup subsys devices
[    0.090021] Initializing cgroup subsys freezer
Quoted 7 lines
Quoted 7 lines
Quoted 7 lines
[    0.090036] Initializing cgroup subsys perf_event
[    0.090048] Initializing cgroup subsys pids
[    0.090078] CPU: Testing write buffer coherency: ok
[    0.090499] Setting up static identity map for 0x80008200 -

0x80008258

Quoted 4 lines
Quoted 4 lines
Quoted 4 lines
[    0.092680] devtmpfs: initialized
[    0.105440] VFP support v0.3: implementor 41 architecture 3 part

30 variant c rev 3

Quoted 4 lines
Quoted 4 lines
Quoted 4 lines
[    0.120529] omap_hwmod: debugss: _wait_target_disable failed
[    0.175584] clocksource: jiffies: mask: 0xffffffff max_cycles:

0xffffffff, max_idle_ns: 19112604462750000 ns

Quoted 6 lines
Quoted 6 lines
Quoted 6 lines
[    0.179852] pinctrl core: initialized pinctrl subsystem
[    0.181216] NET: Registered protocol family 16
[    0.183420] DMA: preallocated 256 KiB pool for atomic coherent

allocations

Quoted 5 lines
Quoted 5 lines
Quoted 5 lines
[    0.209061] cpuidle: using governor ladder
[    0.239048] cpuidle: using governor menu
Quoted 7 lines
Quoted 7 lines
Quoted 7 lines
[    0.243661] OMAP GPIO hardware version 0.1
[    0.254360] hw-breakpoint: debug architecture 0x4 unsupported.
[    0.297629] edma 49000000.edma: TI EDMA DMA engine driver
[    0.298606] reg-fixed-voltage fixedregulator@2: could not find

pctldev for node /ocp/l4_wkup@44c00000/scm@210000/pinmux@800/pinmux_wl12xx_gpio, deferring probe

Quoted 2 lines
Quoted 2 lines
Quoted 2 lines
[    0.302364] omap_i2c 44e0b000.i2c: could not find pctldev for node

/ocp/l4_wkup@44c00000/scm@210000/pinmux@800/pinmux_i2c0_pins, deferring probe

Quoted 8 lines
Quoted 8 lines
Quoted 8 lines
[    0.302525] media: Linux media interface: v0.10
[    0.302588] Linux video capture interface: v2.00
[    0.302638] pps_core: LinuxPPS API ver. 1 registered
[    0.302646] pps_core: Software ver. 5.3.6 - Copyright 2005-2007

Rodolfo Giometti <[email protected]>

Quoted 7 lines
Quoted 7 lines
Quoted 7 lines
[    0.302676] PTP clock support registered
[    0.302741] EDAC MC: Ver: 3.0.0
[    0.303966] omap-mailbox 480c8000.mailbox: omap mailbox rev 0x400
Quoted 7 lines
Quoted 7 lines
Quoted 7 lines
[    0.304332] Advanced Linux Sound Architecture Driver Initialized.
[    0.305512] clocksource: Switched to clocksource timer1
[    0.316775] NET: Registered protocol family 2
[    0.317599] TCP established hash table entries: 2048 (order: 1,

8192 bytes)

Quoted 2 lines
Quoted 2 lines
Quoted 2 lines
[    0.317636] TCP bind hash table entries: 2048 (order: 1, 8192

bytes)

Quoted 2 lines
Quoted 2 lines
Quoted 2 lines
[    0.317663] TCP: Hash tables configured (established 2048 bind

2048)

Quoted 7 lines
Quoted 7 lines
Quoted 7 lines
[    0.317748] UDP hash table entries: 256 (order: 0, 4096 bytes)
[    0.317767] UDP-Lite hash table entries: 256 (order: 0, 4096 bytes)
[    0.317925] NET: Registered protocol family 1
Quoted 7 lines
Quoted 7 lines
Quoted 7 lines
[    0.318352] RPC: Registered named UNIX socket transport module.
[    0.318366] RPC: Registered udp transport module.
[    0.318372] RPC: Registered tcp transport module.
[    0.318379] RPC: Registered tcp NFSv4.1 backchannel transport

module.

Quoted 2 lines
Quoted 2 lines
Quoted 2 lines
[    0.319330] hw perfevents: enabled with armv7_cortex_a8 PMU

driver, 5 counters available

Quoted 7 lines
Quoted 7 lines
Quoted 7 lines
[    0.321392] futex hash table entries: 256 (order: -1, 3072 bytes)
[    0.329780] squashfs: version 4.0 (2009/01/31) Phillip Lougher
[    0.330717] NFS: Registering the id_resolver key type
Quoted 7 lines
Quoted 7 lines
Quoted 7 lines
[    0.330798] Key type id_resolver registered
[    0.330807] Key type id_legacy registered
[    0.330886] ntfs: driver 2.1.32 [Flags: R/O].
[    0.334673] Block layer SCSI generic (bsg) driver version 0.4

loaded (major 248)

Quoted 8 lines
Quoted 8 lines
Quoted 8 lines
[    0.334706] io scheduler noop registered
[    0.334719] io scheduler deadline registered
[    0.334877] io scheduler cfq registered (default)
[    0.336555] pinctrl-single 44e10800.pinmux: 142 pins at pa

f9e10800 size 568

Quoted 4 lines
Quoted 4 lines
Quoted 4 lines
[    0.339415] backlight supply power not found, using dummy regulator
[    0.402480] Serial: 8250/16550 driver, 10 ports, IRQ sharing

disabled

Quoted 2 lines
Quoted 2 lines
Quoted 2 lines
[    0.406962] 44e09000.serial: ttyS0 at MMIO 0x44e09000 (irq = 158,

base_baud = 3000000) is a 8250

Quoted 4 lines
Quoted 4 lines
Quoted 4 lines
[    1.017357] console [ttyS0] enabled
[    1.022206] 48022000.serial: ttyS1 at MMIO 0x48022000 (irq = 159,

base_baud = 3000000) is a 8250

Quoted 4 lines
Quoted 4 lines
Quoted 4 lines
[    1.032273] [drm] Initialized drm 1.1.0 20060810
[    1.039564] [drm] Supports vblank timestamp caching Rev 2

(21.10.2013).

Quoted 13 lines
Quoted 13 lines
Quoted 13 lines
[    1.046349] [drm] No driver support for vblank timestamp query.
[    1.062121] Console: switching to colour frame buffer device 60x34
[    1.070360] tilcdc 4830e000.lcdc: fb0:  frame buffer device
[    1.105531] [drm] Initialized tilcdc 1.0.0 20121205 on minor 0
[    1.118644] loop: module loaded
[    1.124253] libphy: Fixed MDIO Bus: probed
Quoted 7 lines
Quoted 7 lines
Quoted 7 lines
[    1.185550] davinci_mdio 4a101000.mdio: davinci mdio revision 1.6
[    1.191695] davinci_mdio 4a101000.mdio: detected phy mask fffffffe
[    1.198786] libphy: 4a101000.mdio: probed
[    1.202886] davinci_mdio 4a101000.mdio: phy[0]: device

4a101000.mdio:00, driver SMSC LAN8710/LAN8720

Quoted 2 lines
Quoted 2 lines
Quoted 2 lines
[    1.212890] cpsw 4a100000.ethernet: Detected MACID =

a0:f6:fd:4c:a6:ba

Quoted 2 lines
Quoted 2 lines
Quoted 2 lines
[    1.220531] cpsw 4a100000.ethernet: cpsw: Detected MACID =

c4:ed:ba:88:2a:92

Quoted 6 lines
Quoted 6 lines
Quoted 6 lines
[    1.229382] mousedev: PS/2 mouse device common for all mice
[    1.235845] i2c /dev entries driver
[    1.240508] cpuidle: enable-method property 'ti,am3352' found

operations

Quoted 4 lines
Quoted 4 lines
Quoted 4 lines
[    1.248197] omap_hsmmc 48060000.mmc: Got CD GPIO
[    1.275713] pinctrl-single 44e10800.pinmux: bad data for mux

pinmux_mmc2_pins

Quoted 2 lines
Quoted 2 lines
Quoted 2 lines
[    1.282895] pinctrl-single 44e10800.pinmux: no pins entries for

pinmux_mmc2_pins

Quoted 5 lines
Quoted 5 lines
Quoted 5 lines
[    1.317159] ledtrig-cpu: registered to indicate activity on CPUs
[    1.326069] NET: Registered protocol family 10
Quoted 7 lines
Quoted 7 lines
Quoted 7 lines
[    1.332092] sit: IPv6 over IPv4 tunneling driver
[    1.337715] NET: Registered protocol family 17
[    1.342510] Key type dns_resolver registered
[    1.347095] omap_voltage_late_init: Voltage driver support not

added

Quoted 2 lines
Quoted 2 lines
Quoted 2 lines
[    1.407145] tps65910-rtc tps65910-rtc: rtc core: registered

tps65910-rtc as rtc0

Quoted 8 lines
Quoted 8 lines
Quoted 8 lines
[    1.415278] omap_i2c 44e0b000.i2c: bus 0 rev0.11 at 400 kHz
[    1.421665] omap_hsmmc 48060000.mmc: Got CD GPIO
[    1.426813] vmmc: supplied by vbat
[    1.466341] pinctrl-single 44e10800.pinmux: bad data for mux

pinmux_mmc2_pins

Quoted 2 lines
Quoted 2 lines
Quoted 2 lines
[    1.474737] pinctrl-single 44e10800.pinmux: no pins entries for

pinmux_mmc2_pins

Quoted 2 lines
Quoted 2 lines
Quoted 2 lines
[    1.513247] mmc0: host does not support reading read-only switch,

assuming write-enable

Quoted 10 lines
Quoted 10 lines
Quoted 10 lines
[    1.523414] mmc0: new high speed SDHC card at address 0001
[    1.529635] mmcblk0: mmc0:0001 AS 3.72 GiB
[    1.535996]  mmcblk0: p1 p2 p3
[    1.595932] vdd_mpu: supplied by vbat
[    1.602167] input: gpio_buttons@0 as

/devices/platform/gpio_buttons@0/input/input0

Quoted 2 lines
Quoted 2 lines
Quoted 2 lines
[    1.618291] tps65910-rtc tps65910-rtc: setting system clock to
2019-02-01 20:07:49 UTC (1549051669)
Quoted 8 lines
Quoted 8 lines
Quoted 8 lines
[    1.639394] lis3_reg: disabling
[    1.655732] ALSA device list:
[    1.658720]   No soundcards found.
[    1.678290] EXT4-fs (mmcblk0p3): couldn't mount as ext3 due to

feature incompatibilities

Quoted 2 lines
Quoted 2 lines
Quoted 2 lines
[    1.696920] EXT4-fs (mmcblk0p3): couldn't mount as ext2 due to

feature incompatibilities

Quoted 4 lines
Quoted 4 lines
Quoted 4 lines
[    2.183999] EXT4-fs (mmcblk0p3): recovery complete
[    2.196864] EXT4-fs (mmcblk0p3): mounted filesystem with ordered

data mode. Opts: (null)

Quoted 6 lines
Quoted 6 lines
Quoted 6 lines
[    2.205084] VFS: Mounted root (ext4 filesystem) on device 179:3.
[    2.225670] devtmpfs: mounted
[    2.235781] Freeing unused kernel memory: 260K (c08b1000 -

c08f2000)

Quoted 2 lines
Quoted 2 lines
Quoted 2 lines
[    2.242162] This architecture does not have kernel memory

protection.

Quoted 8 lines
Quoted 8 lines
Quoted 8 lines

INIT: version 2.88 booting

Starting udev

[    3.090091] udevd[78]: starting version 3.2.5
[    3.106175] random: udevd: uninitialized urandom read (16 bytes

read, 26 bits of entropy available)

Quoted 2 lines
Quoted 2 lines
Quoted 2 lines
[    3.118667] random: udevd: uninitialized urandom read (16 bytes

read, 26 bits of entropy available)

Quoted 2 lines
Quoted 2 lines
Quoted 2 lines
[    3.128014] random: udevd: uninitialized urandom read (16 bytes

read, 26 bits of entropy available)

Quoted 2 lines
Quoted 2 lines
Quoted 2 lines
[    3.137335] random: udevd: uninitialized urandom read (16 bytes

read, 26 bits of entropy available)

Quoted 4 lines
Quoted 4 lines
Quoted 4 lines
[    3.218433] udevd[79]: starting eudev-3.2.5
[    3.325886] random: udevd: uninitialized urandom read (16 bytes

read, 29 bits of entropy available)

Quoted 2 lines
Quoted 2 lines
Quoted 2 lines
[    3.346155] random: udevd: uninitialized urandom read (16 bytes

read, 29 bits of entropy available)

Quoted 4 lines
Quoted 4 lines
Quoted 4 lines
[    4.820708] EXT4-fs (mmcblk0p3): re-mounted. Opts: data=ordered
[    5.548283] random: dd: uninitialized urandom read (512 bytes

read, 43 bits of entropy available)

Quoted 4 lines
Quoted 4 lines
Quoted 4 lines

INIT: Entering runlevel: 5

Configuring network interfaces... [ 5.820546] net eth0:

initializing cpsw version 1.12 (0)

Quoted 10 lines
Quoted 10 lines
Quoted 10 lines
[    5.825987] net eth0: initialized cpsw ale version 1.4
[    5.831150] net eth0: ALE Table size 1024
[    5.838581] net eth0: phy found : id is : 0x7c0f1
[    5.851838] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
[    9.896392] cpsw 4a100000.ethernet eth0: Link is Up - 100Mbps/Full

- flow control rx/tx

Quoted 17 lines
Quoted 17 lines
Quoted 17 lines
[    9.904635] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready

chown: unrecognized option '--reference=/etc/resolv.conf'

BusyBox v1.27.2 (2018-11-05 21:16:09 UTC) multi-call binary.

Usage: chown [-Rh]... USER[:[GRP]] FILE...

chmod: unrecognized option '--reference=/etc/resolv.conf'

BusyBox v1.27.2 (2018-11-05 21:16:09 UTC) multi-call binary.

Quoted 5 lines
Quoted 5 lines
Quoted 5 lines

Usage: chmod [-R] MODE[,MODE]... FILE...

done.

Starting system message bus: [ 14.887099] random: dbus-daemon:

uninitialized urandom read (12 bytes read, 62 bits of entropy available)

Quoted 2 lines
Quoted 2 lines
Quoted 2 lines
[   14.912318] random: dbus-daemon: uninitialized urandom read (12

bytes read, 62 bits of entropy available)

Quoted 6 lines
Quoted 6 lines
Quoted 6 lines

dbus.

Starting OpenBSD Secure Shell server: sshd

[   15.393971] random: sshd: uninitialized urandom read (32 bytes

read, 65 bits of entropy available)

Quoted 96 lines
Quoted 96 lines
Quoted 96 lines

done.

Starting Xserver

Starting DHCP server:

.

starting DNS forwarder and DHCP server: dnsmasq...

X.Org X Server 1.19.6

Release Date: 2017-12-20

X Protocol Version 11, Revision 0

Build Operating System: Linux 4.15.0-38-generic x86_64

Current Operating System: Linux polycaptil-machine-am335x-evmsk 4.4.19-ge581bb1cac #1 PREEMPT Thu May 24 11:42:17 CEST 2018 armv7l

Kernel command line: console=ttyO0,115200 root=/dev/mmcblk0p3 rw

Build Date: 05 November 2018 09:33:21PM

Current version of pixman: 0.34.0

Before reporting problems, check http://wiki.x.org

to make sure that you have the latest version.

Markers: (--) probed, (**) from config file, (==) default setting,

(++) from command line, (!!) notice, (II) informational,

(WW) warning, (EE) error, (NI) not implemented, (??) unknown.

(==) Log file: "/var/log/Xorg.0.log", Time: Fri Feb 1 20:08:02 2019

(==) Using config file: "/etc/X11/xorg.conf"

(==) Using system config directory "/usr/share/X11/xorg.conf.d"

done.

Starting HOSTAP Daemon: Configuration file: /etc/hostapd.conf

nl80211: 'nl80211' generic netlink not found

Failed to initialize driver 'nl80211'

wlan0: interface state UNINITIALIZED->DISABLED

wlan0: AP-DISABLED

hostapd_free_hapd_data: Interface wlan0 wasn't started

Starting ntpd: done

Starting syslogd/klogd: done

Starting crond: OK

Poky (Yocto Project Reference Distro) 2.5
polycaptil-machine-am335x-evmsk /dev/ttyS0

polycaptil-machine-am335x-evmsk login: D-BUS per-session daemon address is:
unix:abstract=/tmp/dbus-07WuJSySeb,guid=a3e41f2692316c19766e95535c54a7 25

Size 1024x768 not found in available modes

Error: No calibratable devices found.

matchbox: Cant find a keycode for keysym 269025056

matchbox: ignoring key shortcut XF86Calendar=!$contacts

matchbox: Cant find a keycode for keysym 2809

matchbox: ignoring key shortcut telephone=!$dates

matchbox: Cant find a keycode for keysym 269025050

Quoted 8 lines
Quoted 8 lines
Quoted 8 lines

matchbox: ignoring key shortcut XF86Start=!matchbox-remote -desktop

dbus-daemon[358]: Activating service name='org.a11y.atspi.Registry' requested by ':1.0' (uid=0 pid=354 comm="matchbox-terminal ")

dbus-daemon[358]: Successfully activated service

'org.a11y.atspi.Registry'

Quoted 23 lines
Quoted 23 lines
Quoted 22 lines

SpiRegistry daemon is running with well-known name - org.a11y.atspi.Registry

[   30.662697] random: nonblocking pool is initialized

Poky (Yocto Project Reference Distro) 2.5
polycaptil-machine-am335x-evmsk /dev/ttyS0

Thank’s to take time to read my message.

N.Stanisavljevic

--
_______________________________________________
yocto mailing list
[email protected]
https://lists.yoctoproject.org/listinfo/yocto

#14 lore raw
In reply to Stanisavljevic
Quoted 30 lines · Stanisavljevic

Hy Team,

I have a problem

I buid a custom os for AM335x processor and I used yocto to do it.

I build a first version of this os with version krogoth and it work fine.

Now I build a second version of this os with version sumo and the touchscreen work fine during boot process but when kernel is loaded, touchscreen freeze / lock and impossible to use it.

The terminal is printed on the touchscreen but the screen is locked, impossible to write a command or to move the mouse to select, ….

Here is the log of boot to the user session (log got with serial communication between PC and board) :

...

Quoted 29 lines

X.Org X Server 1.19.6

Release Date: 2017-12-20

X Protocol Version 11, Revision 0

Build Operating System: Linux 4.15.0-38-generic x86_64

Current Operating System: Linux polycaptil-machine-am335x-evmsk 4.4.19-ge581bb1cac #1 PREEMPT Thu May 24 11:42:17 CEST 2018 armv7l

Kernel command line: console=ttyO0,115200 root=/dev/mmcblk0p3 rw

Build Date: 05 November 2018 09:33:21PM

Current version of pixman: 0.34.0

Before reporting problems, check http://wiki.x.org

to make sure that you have the latest version.

Markers: (--) probed, (**) from config file, (==) default setting,

(++) from command line, (!!) notice, (II) informational,

(WW) warning, (EE) error, (NI) not implemented, (??) unknown.

Quoted 8 lines

(==) Log file: "/var/log/Xorg.0.log", Time: Fri Feb 1 20:08:02 2019

(==) Using config file: "/etc/X11/xorg.conf"

(==) Using system config directory "/usr/share/X11/xorg.conf.d"

done.

Please post the full /var/log/Xorg.log.

Marc

#15 lore raw

Hy Marc,

Here is the log file attached in this mail.

Nikola

De : Marc Ferland <[email protected]> Envoyé : mardi 5 février 2019 16:10
À : Stanisavljevic <[email protected]> Cc : Yocto discussion list <[email protected]> Objet : Re: [yocto] yocto touchscreen

On Mon, Feb 4, 2019 at 6:17 AM Stanisavljevic <[email protected] <mailto:[email protected]> > wrote:

Hy Team,

I have a problem

I buid a custom os for AM335x processor and I used yocto to do it.

I build a first version of this os with version krogoth and it work fine.

Now I build a second version of this os with version sumo and the touchscreen work fine during boot process but when kernel is loaded, touchscreen freeze / lock and impossible to use it.

The terminal is printed on the touchscreen but the screen is locked, impossible to write a command or to move the mouse to select, ….

Here is the log of boot to the user session (log got with serial communication between PC and board) :

...

X.Org X Server 1.19.6

Release Date: 2017-12-20

X Protocol Version 11, Revision 0

Build Operating System: Linux 4.15.0-38-generic x86_64

Current Operating System: Linux polycaptil-machine-am335x-evmsk 4.4.19-ge581bb1cac #1 PREEMPT Thu May 24 11:42:17 CEST 2018 armv7l

Kernel command line: console=ttyO0,115200 root=/dev/mmcblk0p3 rw

Build Date: 05 November 2018 09:33:21PM

Current version of pixman: 0.34.0

Before reporting problems, check http://wiki.x.org

to make sure that you have the latest version.

Markers: (--) probed, (**) from config file, (==) default setting,

(++) from command line, (!!) notice, (II) informational,

(WW) warning, (EE) error, (NI) not implemented, (??) unknown.

(==) Log file: "/var/log/Xorg.0.log", Time: Fri Feb 1 20:08:02 2019

(==) Using config file: "/etc/X11/xorg.conf"

(==) Using system config directory "/usr/share/X11/xorg.conf.d"

done.

Please post the full /var/log/Xorg.log.

Marc

[     9.597] 
X.Org X Server 1.19.6
Release Date: 2017-12-20
[     9.598] X Protocol Version 11, Revision 0
[     9.598] Build Operating System: Linux 4.15.0-43-generic x86_64 
[     9.598] Current Operating System: Linux polycaptil-machine-am335x-evmsk 4.4.19-ge581bb1cac #1 PREEMPT Thu May 24 11:42:17 CEST 2018 armv7l
[     9.598] Kernel command line: console=ttyO0,115200 root=/dev/mmcblk0p3 rw
[     9.598] Build Date: 04 February 2019  04:11:39PM
[     9.598]  
[     9.598] Current version of pixman: 0.34.0
[     9.598] 	Before reporting problems, check http://wiki.x.org
	to make sure that you have the latest version.
[     9.598] Markers: (--) probed, (**) from config file, (==) default setting,
	(++) from command line, (!!) notice, (II) informational,
	(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
[     9.599] (==) Log file: "/var/log/Xorg.0.log", Time: Tue Feb  5 15:13:43 2019
[     9.612] (==) Using config file: "/etc/X11/xorg.conf"
[     9.612] (==) Using system config directory "/usr/share/X11/xorg.conf.d"
[     9.625] (==) ServerLayout "Builtin Default Layout"
[     9.626] (**) |-->Screen "Builtin Default fbdev Screen 0" (0)
[     9.626] (**) |   |-->Monitor "Builtin Default Monitor"
[     9.626] (**) |   |-->Device "Builtin Default fbdev Device 0"
[     9.626] (==) Automatically adding devices
[     9.627] (==) Automatically enabling devices
[     9.627] (==) Automatically adding GPU devices
[     9.627] (==) Max clients allowed: 256, resource mask: 0x1fffff
[     9.629] (WW) The directory "/usr/share/fonts/X11/misc/" does not exist.
[     9.629] 	Entry deleted from font path.
[     9.629] (WW) The directory "/usr/share/fonts/X11/TTF/" does not exist.
[     9.629] 	Entry deleted from font path.
[     9.629] (WW) The directory "/usr/share/fonts/X11/OTF/" does not exist.
[     9.629] 	Entry deleted from font path.
[     9.629] (WW) The directory "/usr/share/fonts/X11/Type1/" does not exist.
[     9.629] 	Entry deleted from font path.
[     9.629] (WW) The directory "/usr/share/fonts/X11/100dpi/" does not exist.
[     9.629] 	Entry deleted from font path.
[     9.629] (WW) The directory "/usr/share/fonts/X11/75dpi/" does not exist.
[     9.629] 	Entry deleted from font path.
[     9.629] (==) FontPath set to:
[     9.629] (==) ModulePath set to "/usr/lib/xorg/modules"
[     9.629] (II) The server relies on udev to provide the list of input devices.
	If no devices become available, reconfigure udev or disable AutoAddDevices.
[     9.631] (II) Loader magic: 0x1c3d18
[     9.631] (II) Module ABI versions:
[     9.631] 	X.Org ANSI C Emulation: 0.4
[     9.631] 	X.Org Video Driver: 23.0
[     9.631] 	X.Org XInput driver : 24.1
[     9.631] 	X.Org Server Extension : 10.0
[     9.633] (II) xfree86: Adding drm device (/dev/dri/card0)
[     9.634] (II) no primary bus or device found
[     9.634] 	falling back to /sys/devices/platform/ocp/4830e000.lcdc/drm/card0
[     9.634] (II) "glx" will be loaded. This was enabled by default and also specified in the config file.
[     9.634] (II) LoadModule: "extmod"
[     9.636] (II) Module "extmod" already built-in
[     9.636] (II) LoadModule: "dbe"
[     9.636] (II) Module "dbe" already built-in
[     9.636] (II) LoadModule: "glx"
[     9.644] (WW) Warning, couldn't open module glx
[     9.644] (II) UnloadModule: "glx"
[     9.644] (II) Unloading glx
[     9.644] (EE) Failed to load module "glx" (module does not exist, 0)
[     9.644] (II) LoadModule: "record"
[     9.644] (II) Module "record" already built-in
[     9.644] (II) LoadModule: "dri"
[     9.644] (II) Module "dri" already built-in
[     9.644] (II) LoadModule: "fbdev"
[     9.645] (II) Loading /usr/lib/xorg/modules/drivers/fbdev_drv.so
[     9.650] (II) Module fbdev: vendor="X.Org Foundation"
[     9.650] 	compiled for 1.19.6, module version = 0.4.4
[     9.650] 	Module class: X.Org Video Driver
[     9.650] 	ABI class: X.Org Video Driver, version 23.0
[     9.650] (II) FBDEV: driver for framebuffer: fbdev
[     9.650] (--) using VT number 3
[     9.660] (WW) Falling back to old probe method for fbdev
[     9.660] (II) Loading sub module "fbdevhw"
[     9.660] (II) LoadModule: "fbdevhw"
[     9.661] (II) Loading /usr/lib/xorg/modules/libfbdevhw.so
[     9.666] (II) Module fbdevhw: vendor="X.Org Foundation"
[     9.667] 	compiled for 1.19.6, module version = 0.0.2
[     9.667] 	ABI class: X.Org Video Driver, version 23.0
[     9.667] (II) FBDEV(0): using default device
[     9.667] (WW) VGA arbiter: cannot open kernel arbiter, no multi-card support
[     9.667] (II) FBDEV(0): Creating default Display subsection in Screen section
	"Builtin Default fbdev Screen 0" for depth/fbbpp 24/32
[     9.667] (==) FBDEV(0): Depth 24, (==) framebuffer bpp 32
[     9.667] (==) FBDEV(0): RGB weight 888
[     9.667] (==) FBDEV(0): Default visual is TrueColor
[     9.668] (==) FBDEV(0): Using gamma correction (1.0, 1.0, 1.0)
[     9.668] (II) FBDEV(0): hardware:  (video memory: 510kB)
[     9.668] (II) FBDEV(0): checking modes against framebuffer device...
[     9.668] (II) FBDEV(0): checking modes against monitor...
[     9.668] (--) FBDEV(0): Virtual size is 480x272 (pitch 480)
[     9.668] (**) FBDEV(0):  Built-in mode "current"
[     9.668] (==) FBDEV(0): DPI set to (96, 96)
[     9.668] (II) Loading sub module "fb"
[     9.668] (II) LoadModule: "fb"
[     9.669] (II) Loading /usr/lib/xorg/modules/libfb.so
[     9.691] (II) Module fb: vendor="X.Org Foundation"
[     9.691] 	compiled for 1.19.6, module version = 1.0.0
[     9.691] 	ABI class: X.Org ANSI C Emulation, version 0.4
[     9.691] (**) FBDEV(0): using shadow framebuffer
[     9.691] (II) Loading sub module "shadow"
[     9.691] (II) LoadModule: "shadow"
[     9.692] (II) Loading /usr/lib/xorg/modules/libshadow.so
[     9.697] (II) Module shadow: vendor="X.Org Foundation"
[     9.698] 	compiled for 1.19.6, module version = 1.1.0
[     9.698] 	ABI class: X.Org ANSI C Emulation, version 0.4
[     9.698] (==) Depth 24 pixmap format is 32 bpp
[     9.727] (==) FBDEV(0): Backing store enabled
[     9.728] (EE) FBDEV(0): FBIOPUTCMAP: Invalid argument
[     9.728] (EE) FBDEV(0): FBIOPUTCMAP: Invalid argument
[     9.728] (EE) FBDEV(0): FBIOPUTCMAP: Invalid argument
[     9.728] (EE) FBDEV(0): FBIOPUTCMAP: Invalid argument
[     9.728] (EE) FBDEV(0): FBIOPUTCMAP: Invalid argument
[     9.728] (EE) FBDEV(0): FBIOPUTCMAP: Invalid argument
[     9.728] (EE) FBDEV(0): FBIOPUTCMAP: Invalid argument
[     9.728] (EE) FBDEV(0): FBIOPUTCMAP: Invalid argument
[     9.728] (EE) FBDEV(0): FBIOPUTCMAP: Invalid argument
[     9.728] (EE) FBDEV(0): FBIOPUTCMAP: Invalid argument
[     9.728] (EE) FBDEV(0): FBIOPUTCMAP: Invalid argument
[     9.728] (EE) FBDEV(0): FBIOPUTCMAP: Invalid argument
[     9.728] (EE) FBDEV(0): FBIOPUTCMAP: Invalid argument
[     9.728] (EE) FBDEV(0): FBIOPUTCMAP: Invalid argument
[     9.728] (EE) FBDEV(0): FBIOPUTCMAP: Invalid argument
[     9.728] (EE) FBDEV(0): FBIOPUTCMAP: Invalid argument
[     9.728] (EE) FBDEV(0): FBIOPUTCMAP: Invalid argument
[     9.728] (EE) FBDEV(0): FBIOPUTCMAP: Invalid argument
[     9.729] (EE) FBDEV(0): FBIOPUTCMAP: Invalid argument
[     9.729] (EE) FBDEV(0): FBIOPUTCMAP: Invalid argument
[     9.729] (EE) FBDEV(0): FBIOPUTCMAP: Invalid argument
[     9.729] (EE) FBDEV(0): FBIOPUTCMAP: Invalid argument
[     9.729] (EE) FBDEV(0): FBIOPUTCMAP: Invalid argument
[     9.729] (EE) FBDEV(0): FBIOPUTCMAP: Invalid argument
[     9.729] (EE) FBDEV(0): FBIOPUTCMAP: Invalid argument
[     9.729] (EE) FBDEV(0): FBIOPUTCMAP: Invalid argument
[     9.729] (EE) FBDEV(0): FBIOPUTCMAP: Invalid argument
[     9.729] (EE) FBDEV(0): FBIOPUTCMAP: Invalid argument
[     9.729] (EE) FBDEV(0): FBIOPUTCMAP: Invalid argument
[     9.729] (EE) FBDEV(0): FBIOPUTCMAP: Invalid argument
[     9.729] (EE) FBDEV(0): FBIOPUTCMAP: Invalid argument
[     9.729] (EE) FBDEV(0): FBIOPUTCMAP: Invalid argument
[     9.729] (EE) FBDEV(0): FBIOPUTCMAP: Invalid argument
[     9.729] (EE) FBDEV(0): FBIOPUTCMAP: Invalid argument
[     9.729] (EE) FBDEV(0): FBIOPUTCMAP: Invalid argument
[     9.729] (EE) FBDEV(0): FBIOPUTCMAP: Invalid argument
[     9.729] (EE) FBDEV(0): FBIOPUTCMAP: Invalid argument
[     9.729] (EE) FBDEV(0): FBIOPUTCMAP: Invalid argument
[     9.729] (EE) FBDEV(0): FBIOPUTCMAP: Invalid argument
[     9.730] (EE) FBDEV(0): FBIOPUTCMAP: Invalid argument
[     9.730] (EE) FBDEV(0): FBIOPUTCMAP: Invalid argument
[     9.730] (EE) FBDEV(0): FBIOPUTCMAP: Invalid argument
[     9.730] (EE) FBDEV(0): FBIOPUTCMAP: Invalid argument
[     9.730] (EE) FBDEV(0): FBIOPUTCMAP: Invalid argument
[     9.730] (EE) FBDEV(0): FBIOPUTCMAP: Invalid argument
[     9.730] (EE) FBDEV(0): FBIOPUTCMAP: Invalid argument
[     9.730] (EE) FBDEV(0): FBIOPUTCMAP: Invalid argument
[     9.730] (EE) FBDEV(0): FBIOPUTCMAP: Invalid argument
[     9.730] (EE) FBDEV(0): FBIOPUTCMAP: Invalid argument
[     9.730] (EE) FBDEV(0): FBIOPUTCMAP: Invalid argument
[     9.730] (EE) FBDEV(0): FBIOPUTCMAP: Invalid argument
[     9.730] (EE) FBDEV(0): FBIOPUTCMAP: Invalid argument
[     9.730] (EE) FBDEV(0): FBIOPUTCMAP: Invalid argument
[     9.730] (EE) FBDEV(0): FBIOPUTCMAP: Invalid argument
[     9.730] (EE) FBDEV(0): FBIOPUTCMAP: Invalid argument
[     9.730] (EE) FBDEV(0): FBIOPUTCMAP: Invalid argument
[     9.730] (EE) FBDEV(0): FBIOPUTCMAP: Invalid argument
[     9.730] (EE) FBDEV(0): FBIOPUTCMAP: Invalid argument
[     9.730] (EE) FBDEV(0): FBIOPUTCMAP: Invalid argument
[     9.730] (EE) FBDEV(0): FBIOPUTCMAP: Invalid argument
[     9.731] (EE) FBDEV(0): FBIOPUTCMAP: Invalid argument
[     9.731] (EE) FBDEV(0): FBIOPUTCMAP: Invalid argument
[     9.731] (EE) FBDEV(0): FBIOPUTCMAP: Invalid argument
[     9.731] (EE) FBDEV(0): FBIOPUTCMAP: Invalid argument
[     9.731] (EE) FBDEV(0): FBIOPUTCMAP: Invalid argument
[     9.731] (EE) FBDEV(0): FBIOPUTCMAP: Invalid argument
[     9.731] (EE) FBDEV(0): FBIOPUTCMAP: Invalid argument
[     9.731] (EE) FBDEV(0): FBIOPUTCMAP: Invalid argument
[     9.731] (EE) FBDEV(0): FBIOPUTCMAP: Invalid argument
[     9.731] (EE) FBDEV(0): FBIOPUTCMAP: Invalid argument
[     9.731] (EE) FBDEV(0): FBIOPUTCMAP: Invalid argument
[     9.731] (EE) FBDEV(0): FBIOPUTCMAP: Invalid argument
[     9.731] (EE) FBDEV(0): FBIOPUTCMAP: Invalid argument
[     9.731] (EE) FBDEV(0): FBIOPUTCMAP: Invalid argument
[     9.731] (EE) FBDEV(0): FBIOPUTCMAP: Invalid argument
[     9.731] (EE) FBDEV(0): FBIOPUTCMAP: Invalid argument
[     9.731] (EE) FBDEV(0): FBIOPUTCMAP: Invalid argument
[     9.731] (EE) FBDEV(0): FBIOPUTCMAP: Invalid argument
[     9.731] (EE) FBDEV(0): FBIOPUTCMAP: Invalid argument
[     9.731] (EE) FBDEV(0): FBIOPUTCMAP: Invalid argument
[     9.731] (EE) FBDEV(0): FBIOPUTCMAP: Invalid argument
[     9.731] (EE) FBDEV(0): FBIOPUTCMAP: Invalid argument
[     9.731] (EE) FBDEV(0): FBIOPUTCMAP: Invalid argument
[     9.732] (EE) FBDEV(0): FBIOPUTCMAP: Invalid argument
[     9.732] (EE) FBDEV(0): FBIOPUTCMAP: Invalid argument
[     9.732] (EE) FBDEV(0): FBIOPUTCMAP: Invalid argument
[     9.732] (EE) FBDEV(0): FBIOPUTCMAP: Invalid argument
[     9.732] (EE) FBDEV(0): FBIOPUTCMAP: Invalid argument
[     9.732] (EE) FBDEV(0): FBIOPUTCMAP: Invalid argument
[     9.732] (EE) FBDEV(0): FBIOPUTCMAP: Invalid argument
[     9.732] (EE) FBDEV(0): FBIOPUTCMAP: Invalid argument
[     9.732] (EE) FBDEV(0): FBIOPUTCMAP: Invalid argument
[     9.732] (EE) FBDEV(0): FBIOPUTCMAP: Invalid argument
[     9.732] (EE) FBDEV(0): FBIOPUTCMAP: Invalid argument
[     9.732] (EE) FBDEV(0): FBIOPUTCMAP: Invalid argument
[     9.732] (EE) FBDEV(0): FBIOPUTCMAP: Invalid argument
[     9.732] (EE) FBDEV(0): FBIOPUTCMAP: Invalid argument
[     9.732] (EE) FBDEV(0): FBIOPUTCMAP: Invalid argument
[     9.732] (EE) FBDEV(0): FBIOPUTCMAP: Invalid argument
[     9.732] (EE) FBDEV(0): FBIOPUTCMAP: Invalid argument
[     9.732] (EE) FBDEV(0): FBIOPUTCMAP: Invalid argument
[     9.732] (EE) FBDEV(0): FBIOPUTCMAP: Invalid argument
[     9.732] (EE) FBDEV(0): FBIOPUTCMAP: Invalid argument
[     9.732] (EE) FBDEV(0): FBIOPUTCMAP: Invalid argument
[     9.732] (EE) FBDEV(0): FBIOPUTCMAP: Invalid argument
[     9.732] (EE) FBDEV(0): FBIOPUTCMAP: Invalid argument
[     9.733] (EE) FBDEV(0): FBIOPUTCMAP: Invalid argument
[     9.733] (EE) FBDEV(0): FBIOPUTCMAP: Invalid argument
[     9.733] (EE) FBDEV(0): FBIOPUTCMAP: Invalid argument
[     9.733] (EE) FBDEV(0): FBIOPUTCMAP: Invalid argument
[     9.733] (EE) FBDEV(0): FBIOPUTCMAP: Invalid argument
[     9.733] (EE) FBDEV(0): FBIOPUTCMAP: Invalid argument
[     9.733] (EE) FBDEV(0): FBIOPUTCMAP: Invalid argument
[     9.733] (EE) FBDEV(0): FBIOPUTCMAP: Invalid argument
[     9.733] (EE) FBDEV(0): FBIOPUTCMAP: Invalid argument
[     9.733] (EE) FBDEV(0): FBIOPUTCMAP: Invalid argument
[     9.733] (EE) FBDEV(0): FBIOPUTCMAP: Invalid argument
[     9.733] (EE) FBDEV(0): FBIOPUTCMAP: Invalid argument
[     9.733] (EE) FBDEV(0): FBIOPUTCMAP: Invalid argument
[     9.733] (EE) FBDEV(0): FBIOPUTCMAP: Invalid argument
[     9.733] (EE) FBDEV(0): FBIOPUTCMAP: Invalid argument
[     9.733] (EE) FBDEV(0): FBIOPUTCMAP: Invalid argument
[     9.733] (EE) FBDEV(0): FBIOPUTCMAP: Invalid argument
[     9.733] (EE) FBDEV(0): FBIOPUTCMAP: Invalid argument
[     9.733] (EE) FBDEV(0): FBIOPUTCMAP: Invalid argument
[     9.733] (EE) FBDEV(0): FBIOPUTCMAP: Invalid argument
[     9.733] (EE) FBDEV(0): FBIOPUTCMAP: Invalid argument
[     9.733] (EE) FBDEV(0): FBIOPUTCMAP: Invalid argument
[     9.734] (EE) FBDEV(0): FBIOPUTCMAP: Invalid argument
[     9.734] (EE) FBDEV(0): FBIOPUTCMAP: Invalid argument
[     9.734] (EE) FBDEV(0): FBIOPUTCMAP: Invalid argument
[     9.734] (EE) FBDEV(0): FBIOPUTCMAP: Invalid argument
[     9.734] (EE) FBDEV(0): FBIOPUTCMAP: Invalid argument
[     9.734] (EE) FBDEV(0): FBIOPUTCMAP: Invalid argument
[     9.734] (EE) FBDEV(0): FBIOPUTCMAP: Invalid argument
[     9.734] (EE) FBDEV(0): FBIOPUTCMAP: Invalid argument
[     9.734] (EE) FBDEV(0): FBIOPUTCMAP: Invalid argument
[     9.734] (EE) FBDEV(0): FBIOPUTCMAP: Invalid argument
[     9.734] (EE) FBDEV(0): FBIOPUTCMAP: Invalid argument
[     9.734] (EE) FBDEV(0): FBIOPUTCMAP: Invalid argument
[     9.734] (EE) FBDEV(0): FBIOPUTCMAP: Invalid argument
[     9.734] (EE) FBDEV(0): FBIOPUTCMAP: Invalid argument
[     9.734] (EE) FBDEV(0): FBIOPUTCMAP: Invalid argument
[     9.734] (EE) FBDEV(0): FBIOPUTCMAP: Invalid argument
[     9.734] (EE) FBDEV(0): FBIOPUTCMAP: Invalid argument
[     9.734] (EE) FBDEV(0): FBIOPUTCMAP: Invalid argument
[     9.734] (EE) FBDEV(0): FBIOPUTCMAP: Invalid argument
[     9.734] (EE) FBDEV(0): FBIOPUTCMAP: Invalid argument
[     9.734] (EE) FBDEV(0): FBIOPUTCMAP: Invalid argument
[     9.734] (EE) FBDEV(0): FBIOPUTCMAP: Invalid argument
[     9.734] (EE) FBDEV(0): FBIOPUTCMAP: Invalid argument
[     9.735] (EE) FBDEV(0): FBIOPUTCMAP: Invalid argument
[     9.735] (EE) FBDEV(0): FBIOPUTCMAP: Invalid argument
[     9.735] (EE) FBDEV(0): FBIOPUTCMAP: Invalid argument
[     9.735] (EE) FBDEV(0): FBIOPUTCMAP: Invalid argument
[     9.735] (EE) FBDEV(0): FBIOPUTCMAP: Invalid argument
[     9.735] (EE) FBDEV(0): FBIOPUTCMAP: Invalid argument
[     9.735] (EE) FBDEV(0): FBIOPUTCMAP: Invalid argument
[     9.735] (EE) FBDEV(0): FBIOPUTCMAP: Invalid argument
[     9.735] (EE) FBDEV(0): FBIOPUTCMAP: Invalid argument
[     9.735] (EE) FBDEV(0): FBIOPUTCMAP: Invalid argument
[     9.735] (EE) FBDEV(0): FBIOPUTCMAP: Invalid argument
[     9.735] (EE) FBDEV(0): FBIOPUTCMAP: Invalid argument
[     9.735] (EE) FBDEV(0): FBIOPUTCMAP: Invalid argument
[     9.735] (EE) FBDEV(0): FBIOPUTCMAP: Invalid argument
[     9.735] (EE) FBDEV(0): FBIOPUTCMAP: Invalid argument
[     9.735] (EE) FBDEV(0): FBIOPUTCMAP: Invalid argument
[     9.735] (EE) FBDEV(0): FBIOPUTCMAP: Invalid argument
[     9.735] (EE) FBDEV(0): FBIOPUTCMAP: Invalid argument
[     9.735] (EE) FBDEV(0): FBIOPUTCMAP: Invalid argument
[     9.735] (EE) FBDEV(0): FBIOPUTCMAP: Invalid argument
[     9.735] (EE) FBDEV(0): FBIOPUTCMAP: Invalid argument
[     9.735] (EE) FBDEV(0): FBIOPUTCMAP: Invalid argument
[     9.735] (EE) FBDEV(0): FBIOPUTCMAP: Invalid argument
[     9.736] (EE) FBDEV(0): FBIOPUTCMAP: Invalid argument
[     9.736] (EE) FBDEV(0): FBIOPUTCMAP: Invalid argument
[     9.736] (EE) FBDEV(0): FBIOPUTCMAP: Invalid argument
[     9.736] (EE) FBDEV(0): FBIOPUTCMAP: Invalid argument
[     9.736] (EE) FBDEV(0): FBIOPUTCMAP: Invalid argument
[     9.736] (EE) FBDEV(0): FBIOPUTCMAP: Invalid argument
[     9.736] (EE) FBDEV(0): FBIOPUTCMAP: Invalid argument
[     9.736] (EE) FBDEV(0): FBIOPUTCMAP: Invalid argument
[     9.736] (EE) FBDEV(0): FBIOPUTCMAP: Invalid argument
[     9.736] (EE) FBDEV(0): FBIOPUTCMAP: Invalid argument
[     9.736] (EE) FBDEV(0): FBIOPUTCMAP: Invalid argument
[     9.736] (EE) FBDEV(0): FBIOPUTCMAP: Invalid argument
[     9.736] (EE) FBDEV(0): FBIOPUTCMAP: Invalid argument
[     9.736] (EE) FBDEV(0): FBIOPUTCMAP: Invalid argument
[     9.736] (EE) FBDEV(0): FBIOPUTCMAP: Invalid argument
[     9.736] (EE) FBDEV(0): FBIOPUTCMAP: Invalid argument
[     9.736] (EE) FBDEV(0): FBIOPUTCMAP: Invalid argument
[     9.736] (EE) FBDEV(0): FBIOPUTCMAP: Invalid argument
[     9.736] (EE) FBDEV(0): FBIOPUTCMAP: Invalid argument
[     9.736] (EE) FBDEV(0): FBIOPUTCMAP: Invalid argument
[     9.737] (EE) FBDEV(0): FBIOPUTCMAP: Invalid argument
[     9.737] (EE) FBDEV(0): FBIOPUTCMAP: Invalid argument
[     9.737] (EE) FBDEV(0): FBIOPUTCMAP: Invalid argument
[     9.737] (EE) FBDEV(0): FBIOPUTCMAP: Invalid argument
[     9.737] (EE) FBDEV(0): FBIOPUTCMAP: Invalid argument
[     9.737] (EE) FBDEV(0): FBIOPUTCMAP: Invalid argument
[     9.737] (EE) FBDEV(0): FBIOPUTCMAP: Invalid argument
[     9.737] (EE) FBDEV(0): FBIOPUTCMAP: Invalid argument
[     9.737] (EE) FBDEV(0): FBIOPUTCMAP: Invalid argument
[     9.737] (EE) FBDEV(0): FBIOPUTCMAP: Invalid argument
[     9.737] (EE) FBDEV(0): FBIOPUTCMAP: Invalid argument
[     9.737] (EE) FBDEV(0): FBIOPUTCMAP: Invalid argument
[     9.737] (EE) FBDEV(0): FBIOPUTCMAP: Invalid argument
[     9.737] (EE) FBDEV(0): FBIOPUTCMAP: Invalid argument
[     9.737] (EE) FBDEV(0): FBIOPUTCMAP: Invalid argument
[     9.737] (EE) FBDEV(0): FBIOPUTCMAP: Invalid argument
[     9.737] (EE) FBDEV(0): FBIOPUTCMAP: Invalid argument
[     9.737] (EE) FBDEV(0): FBIOPUTCMAP: Invalid argument
[     9.737] (EE) FBDEV(0): FBIOPUTCMAP: Invalid argument
[     9.737] (EE) FBDEV(0): FBIOPUTCMAP: Invalid argument
[     9.737] (EE) FBDEV(0): FBIOPUTCMAP: Invalid argument
[     9.737] (EE) FBDEV(0): FBIOPUTCMAP: Invalid argument
[     9.737] (EE) FBDEV(0): FBIOPUTCMAP: Invalid argument
[     9.738] (EE) FBDEV(0): FBIOPUTCMAP: Invalid argument
[     9.738] (EE) FBDEV(0): FBIOPUTCMAP: Invalid argument
[     9.738] (EE) FBDEV(0): FBIOPUTCMAP: Invalid argument
[     9.738] (EE) FBDEV(0): FBIOPUTCMAP: Invalid argument
[     9.738] (EE) FBDEV(0): FBIOPUTCMAP: Invalid argument
[     9.738] (EE) FBDEV(0): FBIOPUTCMAP: Invalid argument
[     9.738] (EE) FBDEV(0): FBIOPUTCMAP: Invalid argument
[     9.738] (EE) FBDEV(0): FBIOPUTCMAP: Invalid argument
[     9.738] (EE) FBDEV(0): FBIOPUTCMAP: Invalid argument
[     9.738] (EE) FBDEV(0): FBIOPUTCMAP: Invalid argument
[     9.738] (EE) FBDEV(0): FBIOPUTCMAP: Invalid argument
[     9.738] (EE) FBDEV(0): FBIOPUTCMAP: Invalid argument
[     9.738] (EE) FBDEV(0): FBIOPUTCMAP: Invalid argument
[     9.738] (EE) FBDEV(0): FBIOPUTCMAP: Invalid argument
[     9.738] (EE) FBDEV(0): FBIOPUTCMAP: Invalid argument
[     9.738] (EE) FBDEV(0): FBIOPUTCMAP: Invalid argument
[     9.738] (EE) FBDEV(0): FBIOPUTCMAP: Invalid argument
[     9.738] (EE) FBDEV(0): FBIOPUTCMAP: Invalid argument
[     9.738] (EE) FBDEV(0): FBIOPUTCMAP: Invalid argument
[     9.738] (EE) FBDEV(0): FBIOPUTCMAP: Invalid argument
[     9.738] (EE) FBDEV(0): FBIOPUTCMAP: Invalid argument
[     9.738] (EE) FBDEV(0): FBIOPUTCMAP: Invalid argument
[     9.739] (==) FBDEV(0): DPMS enabled
[     9.740] (==) RandR enabled
[    10.064] (II) config/udev: Adding input device gpio_buttons@0 (/dev/input/event0)
[    10.065] (II) No input driver specified, ignoring this device.
[    10.065] (II) This device may have been added with another device file.
[    10.066] (II) config/udev: Adding input device (unnamed) (/dev/ttyS0)
[    10.066] (II) No input driver specified, ignoring this device.
[    10.066] (II) This device may have been added with another device file.
[    10.067] (II) config/udev: Adding input device (unnamed) (/dev/ttyS1)
[    10.067] (II) No input driver specified, ignoring this device.
[    10.067] (II) This device may have been added with another device file.
[    10.069] (II) config/udev: Adding input device (unnamed) (/dev/ttyS2)
[    10.069] (II) No input driver specified, ignoring this device.
[    10.069] (II) This device may have been added with another device file.
[    10.070] (II) config/udev: Adding input device (unnamed) (/dev/ttyS3)
[    10.070] (II) No input driver specified, ignoring this device.
[    10.070] (II) This device may have been added with another device file.
[    10.071] (II) config/udev: Adding input device (unnamed) (/dev/ttyS4)
[    10.071] (II) No input driver specified, ignoring this device.
[    10.071] (II) This device may have been added with another device file.
[    10.072] (II) config/udev: Adding input device (unnamed) (/dev/ttyS5)
[    10.072] (II) No input driver specified, ignoring this device.
[    10.072] (II) This device may have been added with another device file.
[    10.072] (II) config/udev: Adding input device (unnamed) (/dev/ttyS6)
[    10.073] (II) No input driver specified, ignoring this device.
[    10.073] (II) This device may have been added with another device file.
[    10.073] (II) config/udev: Adding input device (unnamed) (/dev/ttyS7)
[    10.073] (II) No input driver specified, ignoring this device.
[    10.074] (II) This device may have been added with another device file.
[    10.074] (II) config/udev: Adding input device (unnamed) (/dev/ttyS8)
[    10.074] (II) No input driver specified, ignoring this device.
[    10.074] (II) This device may have been added with another device file.
[    10.075] (II) config/udev: Adding input device (unnamed) (/dev/ttyS9)
[    10.075] (II) No input driver specified, ignoring this device.
[    10.075] (II) This device may have been added with another device file.
[    10.076] (II) config/udev: Adding input device (unnamed) (/dev/input/mice)
[    10.076] (II) No input driver specified, ignoring this device.
[    10.076] (II) This device may have been added with another device file.
[    10.076] (II) config/udev: Adding input device (unnamed) (/dev/console)
[    10.076] (II) No input driver specified, ignoring this device.
[    10.076] (II) This device may have been added with another device file.
[    10.077] (II) config/udev: Adding input device (unnamed) (/dev/ptmx)
[    10.077] (II) No input driver specified, ignoring this device.
[    10.077] (II) This device may have been added with another device file.
[    10.077] (II) config/udev: Adding input device (unnamed) (/dev/ptya0)
[    10.077] (II) No input driver specified, ignoring this device.
[    10.078] (II) This device may have been added with another device file.
[    10.078] (II) config/udev: Adding input device (unnamed) (/dev/ptya1)
[    10.078] (II) No input driver specified, ignoring this device.
[    10.078] (II) This device may have been added with another device file.
[    10.078] (II) config/udev: Adding input device (unnamed) (/dev/ptya2)
[    10.079] (II) No input driver specified, ignoring this device.
[    10.079] (II) This device may have been added with another device file.
[    10.079] (II) config/udev: Adding input device (unnamed) (/dev/ptya3)
[    10.079] (II) No input driver specified, ignoring this device.
[    10.079] (II) This device may have been added with another device file.
[    10.080] (II) config/udev: Adding input device (unnamed) (/dev/ptya4)
[    10.080] (II) No input driver specified, ignoring this device.
[    10.080] (II) This device may have been added with another device file.
[    10.080] (II) config/udev: Adding input device (unnamed) (/dev/ptya5)
[    10.080] (II) No input driver specified, ignoring this device.
[    10.080] (II) This device may have been added with another device file.
[    10.081] (II) config/udev: Adding input device (unnamed) (/dev/ptya6)
[    10.081] (II) No input driver specified, ignoring this device.
[    10.081] (II) This device may have been added with another device file.
[    10.081] (II) config/udev: Adding input device (unnamed) (/dev/ptya7)
[    10.082] (II) No input driver specified, ignoring this device.
[    10.082] (II) This device may have been added with another device file.
[    10.082] (II) config/udev: Adding input device (unnamed) (/dev/ptya8)
[    10.082] (II) No input driver specified, ignoring this device.
[    10.082] (II) This device may have been added with another device file.
[    10.083] (II) config/udev: Adding input device (unnamed) (/dev/ptya9)
[    10.083] (II) No input driver specified, ignoring this device.
[    10.083] (II) This device may have been added with another device file.
[    10.083] (II) config/udev: Adding input device (unnamed) (/dev/ptyaa)
[    10.083] (II) No input driver specified, ignoring this device.
[    10.083] (II) This device may have been added with another device file.
[    10.084] (II) config/udev: Adding input device (unnamed) (/dev/ptyab)
[    10.084] (II) No input driver specified, ignoring this device.
[    10.084] (II) This device may have been added with another device file.
[    10.084] (II) config/udev: Adding input device (unnamed) (/dev/ptyac)
[    10.084] (II) No input driver specified, ignoring this device.
[    10.084] (II) This device may have been added with another device file.
[    10.085] (II) config/udev: Adding input device (unnamed) (/dev/ptyad)
[    10.085] (II) No input driver specified, ignoring this device.
[    10.085] (II) This device may have been added with another device file.
[    10.085] (II) config/udev: Adding input device (unnamed) (/dev/ptyae)
[    10.085] (II) No input driver specified, ignoring this device.
[    10.085] (II) This device may have been added with another device file.
[    10.086] (II) config/udev: Adding input device (unnamed) (/dev/ptyaf)
[    10.086] (II) No input driver specified, ignoring this device.
[    10.086] (II) This device may have been added with another device file.
[    10.086] (II) config/udev: Adding input device (unnamed) (/dev/ptyb0)
[    10.086] (II) No input driver specified, ignoring this device.
[    10.086] (II) This device may have been added with another device file.
[    10.087] (II) config/udev: Adding input device (unnamed) (/dev/ptyb1)
[    10.087] (II) No input driver specified, ignoring this device.
[    10.087] (II) This device may have been added with another device file.
[    10.087] (II) config/udev: Adding input device (unnamed) (/dev/ptyb2)
[    10.087] (II) No input driver specified, ignoring this device.
[    10.087] (II) This device may have been added with another device file.
[    10.088] (II) config/udev: Adding input device (unnamed) (/dev/ptyb3)
[    10.088] (II) No input driver specified, ignoring this device.
[    10.088] (II) This device may have been added with another device file.
[    10.088] (II) config/udev: Adding input device (unnamed) (/dev/ptyb4)
[    10.088] (II) No input driver specified, ignoring this device.
[    10.088] (II) This device may have been added with another device file.
[    10.089] (II) config/udev: Adding input device (unnamed) (/dev/ptyb5)
[    10.089] (II) No input driver specified, ignoring this device.
[    10.089] (II) This device may have been added with another device file.
[    10.089] (II) config/udev: Adding input device (unnamed) (/dev/ptyb6)
[    10.089] (II) No input driver specified, ignoring this device.
[    10.090] (II) This device may have been added with another device file.
[    10.090] (II) config/udev: Adding input device (unnamed) (/dev/ptyb7)
[    10.091] (II) No input driver specified, ignoring this device.
[    10.091] (II) This device may have been added with another device file.
[    10.091] (II) config/udev: Adding input device (unnamed) (/dev/ptyb8)
[    10.091] (II) No input driver specified, ignoring this device.
[    10.091] (II) This device may have been added with another device file.
[    10.092] (II) config/udev: Adding input device (unnamed) (/dev/ptyb9)
[    10.092] (II) No input driver specified, ignoring this device.
[    10.092] (II) This device may have been added with another device file.
[    10.092] (II) config/udev: Adding input device (unnamed) (/dev/ptyba)
[    10.092] (II) No input driver specified, ignoring this device.
[    10.092] (II) This device may have been added with another device file.
[    10.093] (II) config/udev: Adding input device (unnamed) (/dev/ptybb)
[    10.093] (II) No input driver specified, ignoring this device.
[    10.093] (II) This device may have been added with another device file.
[    10.093] (II) config/udev: Adding input device (unnamed) (/dev/ptybc)
[    10.093] (II) No input driver specified, ignoring this device.
[    10.093] (II) This device may have been added with another device file.
[    10.094] (II) config/udev: Adding input device (unnamed) (/dev/ptybd)
[    10.094] (II) No input driver specified, ignoring this device.
[    10.094] (II) This device may have been added with another device file.
[    10.094] (II) config/udev: Adding input device (unnamed) (/dev/ptybe)
[    10.094] (II) No input driver specified, ignoring this device.
[    10.094] (II) This device may have been added with another device file.
[    10.095] (II) config/udev: Adding input device (unnamed) (/dev/ptybf)
[    10.095] (II) No input driver specified, ignoring this device.
[    10.095] (II) This device may have been added with another device file.
[    10.095] (II) config/udev: Adding input device (unnamed) (/dev/ptyc0)
[    10.096] (II) No input driver specified, ignoring this device.
[    10.096] (II) This device may have been added with another device file.
[    10.096] (II) config/udev: Adding input device (unnamed) (/dev/ptyc1)
[    10.096] (II) No input driver specified, ignoring this device.
[    10.096] (II) This device may have been added with another device file.
[    10.096] (II) config/udev: Adding input device (unnamed) (/dev/ptyc2)
[    10.097] (II) No input driver specified, ignoring this device.
[    10.097] (II) This device may have been added with another device file.
[    10.097] (II) config/udev: Adding input device (unnamed) (/dev/ptyc3)
[    10.097] (II) No input driver specified, ignoring this device.
[    10.097] (II) This device may have been added with another device file.
[    10.098] (II) config/udev: Adding input device (unnamed) (/dev/ptyc4)
[    10.098] (II) No input driver specified, ignoring this device.
[    10.098] (II) This device may have been added with another device file.
[    10.098] (II) config/udev: Adding input device (unnamed) (/dev/ptyc5)
[    10.098] (II) No input driver specified, ignoring this device.
[    10.098] (II) This device may have been added with another device file.
[    10.099] (II) config/udev: Adding input device (unnamed) (/dev/ptyc6)
[    10.099] (II) No input driver specified, ignoring this device.
[    10.099] (II) This device may have been added with another device file.
[    10.099] (II) config/udev: Adding input device (unnamed) (/dev/ptyc7)
[    10.099] (II) No input driver specified, ignoring this device.
[    10.099] (II) This device may have been added with another device file.
[    10.100] (II) config/udev: Adding input device (unnamed) (/dev/ptyc8)
[    10.100] (II) No input driver specified, ignoring this device.
[    10.100] (II) This device may have been added with another device file.
[    10.101] (II) config/udev: Adding input device (unnamed) (/dev/ptyc9)
[    10.101] (II) No input driver specified, ignoring this device.
[    10.101] (II) This device may have been added with another device file.
[    10.101] (II) config/udev: Adding input device (unnamed) (/dev/ptyca)
[    10.101] (II) No input driver specified, ignoring this device.
[    10.101] (II) This device may have been added with another device file.
[    10.102] (II) config/udev: Adding input device (unnamed) (/dev/ptycb)
[    10.102] (II) No input driver specified, ignoring this device.
[    10.102] (II) This device may have been added with another device file.
[    10.102] (II) config/udev: Adding input device (unnamed) (/dev/ptycc)
[    10.102] (II) No input driver specified, ignoring this device.
[    10.102] (II) This device may have been added with another device file.
[    10.103] (II) config/udev: Adding input device (unnamed) (/dev/ptycd)
[    10.103] (II) No input driver specified, ignoring this device.
[    10.103] (II) This device may have been added with another device file.
[    10.103] (II) config/udev: Adding input device (unnamed) (/dev/ptyce)
[    10.103] (II) No input driver specified, ignoring this device.
[    10.103] (II) This device may have been added with another device file.
[    10.104] (II) config/udev: Adding input device (unnamed) (/dev/ptycf)
[    10.104] (II) No input driver specified, ignoring this device.
[    10.104] (II) This device may have been added with another device file.
[    10.104] (II) config/udev: Adding input device (unnamed) (/dev/ptyd0)
[    10.104] (II) No input driver specified, ignoring this device.
[    10.104] (II) This device may have been added with another device file.
[    10.105] (II) config/udev: Adding input device (unnamed) (/dev/ptyd1)
[    10.105] (II) No input driver specified, ignoring this device.
[    10.105] (II) This device may have been added with another device file.
[    10.105] (II) config/udev: Adding input device (unnamed) (/dev/ptyd2)
[    10.105] (II) No input driver specified, ignoring this device.
[    10.106] (II) This device may have been added with another device file.
[    10.106] (II) config/udev: Adding input device (unnamed) (/dev/ptyd3)
[    10.106] (II) No input driver specified, ignoring this device.
[    10.106] (II) This device may have been added with another device file.
[    10.106] (II) config/udev: Adding input device (unnamed) (/dev/ptyd4)
[    10.107] (II) No input driver specified, ignoring this device.
[    10.107] (II) This device may have been added with another device file.
[    10.107] (II) config/udev: Adding input device (unnamed) (/dev/ptyd5)
[    10.107] (II) No input driver specified, ignoring this device.
[    10.107] (II) This device may have been added with another device file.
[    10.108] (II) config/udev: Adding input device (unnamed) (/dev/ptyd6)
[    10.108] (II) No input driver specified, ignoring this device.
[    10.108] (II) This device may have been added with another device file.
[    10.108] (II) config/udev: Adding input device (unnamed) (/dev/ptyd7)
[    10.108] (II) No input driver specified, ignoring this device.
[    10.108] (II) This device may have been added with another device file.
[    10.109] (II) config/udev: Adding input device (unnamed) (/dev/ptyd8)
[    10.109] (II) No input driver specified, ignoring this device.
[    10.109] (II) This device may have been added with another device file.
[    10.109] (II) config/udev: Adding input device (unnamed) (/dev/ptyd9)
[    10.109] (II) No input driver specified, ignoring this device.
[    10.109] (II) This device may have been added with another device file.
[    10.110] (II) config/udev: Adding input device (unnamed) (/dev/ptyda)
[    10.110] (II) No input driver specified, ignoring this device.
[    10.110] (II) This device may have been added with another device file.
[    10.111] (II) config/udev: Adding input device (unnamed) (/dev/ptydb)
[    10.111] (II) No input driver specified, ignoring this device.
[    10.111] (II) This device may have been added with another device file.
[    10.111] (II) config/udev: Adding input device (unnamed) (/dev/ptydc)
[    10.111] (II) No input driver specified, ignoring this device.
[    10.111] (II) This device may have been added with another device file.
[    10.112] (II) config/udev: Adding input device (unnamed) (/dev/ptydd)
[    10.112] (II) No input driver specified, ignoring this device.
[    10.112] (II) This device may have been added with another device file.
[    10.112] (II) config/udev: Adding input device (unnamed) (/dev/ptyde)
[    10.113] (II) No input driver specified, ignoring this device.
[    10.113] (II) This device may have been added with another device file.
[    10.113] (II) config/udev: Adding input device (unnamed) (/dev/ptydf)
[    10.113] (II) No input driver specified, ignoring this device.
[    10.113] (II) This device may have been added with another device file.
[    10.114] (II) config/udev: Adding input device (unnamed) (/dev/ptye0)
[    10.114] (II) No input driver specified, ignoring this device.
[    10.114] (II) This device may have been added with another device file.
[    10.114] (II) config/udev: Adding input device (unnamed) (/dev/ptye1)
[    10.114] (II) No input driver specified, ignoring this device.
[    10.114] (II) This device may have been added with another device file.
[    10.115] (II) config/udev: Adding input device (unnamed) (/dev/ptye2)
[    10.115] (II) No input driver specified, ignoring this device.
[    10.115] (II) This device may have been added with another device file.
[    10.115] (II) config/udev: Adding input device (unnamed) (/dev/ptye3)
[    10.115] (II) No input driver specified, ignoring this device.
[    10.115] (II) This device may have been added with another device file.
[    10.116] (II) config/udev: Adding input device (unnamed) (/dev/ptye4)
[    10.116] (II) No input driver specified, ignoring this device.
[    10.116] (II) This device may have been added with another device file.
[    10.116] (II) config/udev: Adding input device (unnamed) (/dev/ptye5)
[    10.116] (II) No input driver specified, ignoring this device.
[    10.116] (II) This device may have been added with another device file.
[    10.117] (II) config/udev: Adding input device (unnamed) (/dev/ptye6)
[    10.117] (II) No input driver specified, ignoring this device.
[    10.117] (II) This device may have been added with another device file.
[    10.117] (II) config/udev: Adding input device (unnamed) (/dev/ptye7)
[    10.117] (II) No input driver specified, ignoring this device.
[    10.117] (II) This device may have been added with another device file.
[    10.118] (II) config/udev: Adding input device (unnamed) (/dev/ptye8)
[    10.118] (II) No input driver specified, ignoring this device.
[    10.118] (II) This device may have been added with another device file.
[    10.118] (II) config/udev: Adding input device (unnamed) (/dev/ptye9)
[    10.118] (II) No input driver specified, ignoring this device.
[    10.118] (II) This device may have been added with another device file.
[    10.119] (II) config/udev: Adding input device (unnamed) (/dev/ptyea)
[    10.119] (II) No input driver specified, ignoring this device.
[    10.119] (II) This device may have been added with another device file.
[    10.119] (II) config/udev: Adding input device (unnamed) (/dev/ptyeb)
[    10.119] (II) No input driver specified, ignoring this device.
[    10.119] (II) This device may have been added with another device file.
[    10.120] (II) config/udev: Adding input device (unnamed) (/dev/ptyec)
[    10.120] (II) No input driver specified, ignoring this device.
[    10.120] (II) This device may have been added with another device file.
[    10.121] (II) config/udev: Adding input device (unnamed) (/dev/ptyed)
[    10.121] (II) No input driver specified, ignoring this device.
[    10.121] (II) This device may have been added with another device file.
[    10.121] (II) config/udev: Adding input device (unnamed) (/dev/ptyee)
[    10.121] (II) No input driver specified, ignoring this device.
[    10.121] (II) This device may have been added with another device file.
[    10.122] (II) config/udev: Adding input device (unnamed) (/dev/ptyef)
[    10.122] (II) No input driver specified, ignoring this device.
[    10.122] (II) This device may have been added with another device file.
[    10.122] (II) config/udev: Adding input device (unnamed) (/dev/ptyp0)
[    10.122] (II) No input driver specified, ignoring this device.
[    10.122] (II) This device may have been added with another device file.
[    10.123] (II) config/udev: Adding input device (unnamed) (/dev/ptyp1)
[    10.123] (II) No input driver specified, ignoring this device.
[    10.123] (II) This device may have been added with another device file.
[    10.123] (II) config/udev: Adding input device (unnamed) (/dev/ptyp2)
[    10.124] (II) No input driver specified, ignoring this device.
[    10.124] (II) This device may have been added with another device file.
[    10.124] (II) config/udev: Adding input device (unnamed) (/dev/ptyp3)
[    10.124] (II) No input driver specified, ignoring this device.
[    10.124] (II) This device may have been added with another device file.
[    10.125] (II) config/udev: Adding input device (unnamed) (/dev/ptyp4)
[    10.125] (II) No input driver specified, ignoring this device.
[    10.125] (II) This device may have been added with another device file.
[    10.125] (II) config/udev: Adding input device (unnamed) (/dev/ptyp5)
[    10.125] (II) No input driver specified, ignoring this device.
[    10.125] (II) This device may have been added with another device file.
[    10.126] (II) config/udev: Adding input device (unnamed) (/dev/ptyp6)
[    10.126] (II) No input driver specified, ignoring this device.
[    10.126] (II) This device may have been added with another device file.
[    10.126] (II) config/udev: Adding input device (unnamed) (/dev/ptyp7)
[    10.126] (II) No input driver specified, ignoring this device.
[    10.126] (II) This device may have been added with another device file.
[    10.127] (II) config/udev: Adding input device (unnamed) (/dev/ptyp8)
[    10.127] (II) No input driver specified, ignoring this device.
[    10.127] (II) This device may have been added with another device file.
[    10.128] (II) config/udev: Adding input device (unnamed) (/dev/ptyp9)
[    10.128] (II) No input driver specified, ignoring this device.
[    10.128] (II) This device may have been added with another device file.
[    10.128] (II) config/udev: Adding input device (unnamed) (/dev/ptypa)
[    10.128] (II) No input driver specified, ignoring this device.
[    10.128] (II) This device may have been added with another device file.
[    10.129] (II) config/udev: Adding input device (unnamed) (/dev/ptypb)
[    10.129] (II) No input driver specified, ignoring this device.
[    10.129] (II) This device may have been added with another device file.
[    10.129] (II) config/udev: Adding input device (unnamed) (/dev/ptypc)
[    10.129] (II) No input driver specified, ignoring this device.
[    10.129] (II) This device may have been added with another device file.
[    10.130] (II) config/udev: Adding input device (unnamed) (/dev/ptypd)
[    10.130] (II) No input driver specified, ignoring this device.
[    10.130] (II) This device may have been added with another device file.
[    10.131] (II) config/udev: Adding input device (unnamed) (/dev/ptype)
[    10.131] (II) No input driver specified, ignoring this device.
[    10.131] (II) This device may have been added with another device file.
[    10.131] (II) config/udev: Adding input device (unnamed) (/dev/ptypf)
[    10.131] (II) No input driver specified, ignoring this device.
[    10.131] (II) This device may have been added with another device file.
[    10.132] (II) config/udev: Adding input device (unnamed) (/dev/ptyq0)
[    10.132] (II) No input driver specified, ignoring this device.
[    10.132] (II) This device may have been added with another device file.
[    10.132] (II) config/udev: Adding input device (unnamed) (/dev/ptyq1)
[    10.132] (II) No input driver specified, ignoring this device.
[    10.132] (II) This device may have been added with another device file.
[    10.133] (II) config/udev: Adding input device (unnamed) (/dev/ptyq2)
[    10.133] (II) No input driver specified, ignoring this device.
[    10.133] (II) This device may have been added with another device file.
[    10.133] (II) config/udev: Adding input device (unnamed) (/dev/ptyq3)
[    10.133] (II) No input driver specified, ignoring this device.
[    10.133] (II) This device may have been added with another device file.
[    10.134] (II) config/udev: Adding input device (unnamed) (/dev/ptyq4)
[    10.134] (II) No input driver specified, ignoring this device.
[    10.134] (II) This device may have been added with another device file.
[    10.134] (II) config/udev: Adding input device (unnamed) (/dev/ptyq5)
[    10.134] (II) No input driver specified, ignoring this device.
[    10.135] (II) This device may have been added with another device file.
[    10.135] (II) config/udev: Adding input device (unnamed) (/dev/ptyq6)
[    10.135] (II) No input driver specified, ignoring this device.
[    10.135] (II) This device may have been added with another device file.
[    10.136] (II) config/udev: Adding input device (unnamed) (/dev/ptyq7)
[    10.136] (II) No input driver specified, ignoring this device.
[    10.136] (II) This device may have been added with another device file.
[    10.136] (II) config/udev: Adding input device (unnamed) (/dev/ptyq8)
[    10.136] (II) No input driver specified, ignoring this device.
[    10.136] (II) This device may have been added with another device file.
[    10.137] (II) config/udev: Adding input device (unnamed) (/dev/ptyq9)
[    10.137] (II) No input driver specified, ignoring this device.
[    10.137] (II) This device may have been added with another device file.
[    10.137] (II) config/udev: Adding input device (unnamed) (/dev/ptyqa)
[    10.137] (II) No input driver specified, ignoring this device.
[    10.137] (II) This device may have been added with another device file.
[    10.138] (II) config/udev: Adding input device (unnamed) (/dev/ptyqb)
[    10.138] (II) No input driver specified, ignoring this device.
[    10.138] (II) This device may have been added with another device file.
[    10.138] (II) config/udev: Adding input device (unnamed) (/dev/ptyqc)
[    10.138] (II) No input driver specified, ignoring this device.
[    10.138] (II) This device may have been added with another device file.
[    10.139] (II) config/udev: Adding input device (unnamed) (/dev/ptyqd)
[    10.139] (II) No input driver specified, ignoring this device.
[    10.139] (II) This device may have been added with another device file.
[    10.139] (II) config/udev: Adding input device (unnamed) (/dev/ptyqe)
[    10.139] (II) No input driver specified, ignoring this device.
[    10.139] (II) This device may have been added with another device file.
[    10.140] (II) config/udev: Adding input device (unnamed) (/dev/ptyqf)
[    10.140] (II) No input driver specified, ignoring this device.
[    10.140] (II) This device may have been added with another device file.
[    10.141] (II) config/udev: Adding input device (unnamed) (/dev/ptyr0)
[    10.141] (II) No input driver specified, ignoring this device.
[    10.141] (II) This device may have been added with another device file.
[    10.141] (II) config/udev: Adding input device (unnamed) (/dev/ptyr1)
[    10.141] (II) No input driver specified, ignoring this device.
[    10.141] (II) This device may have been added with another device file.
[    10.142] (II) config/udev: Adding input device (unnamed) (/dev/ptyr2)
[    10.142] (II) No input driver specified, ignoring this device.
[    10.142] (II) This device may have been added with another device file.
[    10.142] (II) config/udev: Adding input device (unnamed) (/dev/ptyr3)
[    10.142] (II) No input driver specified, ignoring this device.
[    10.142] (II) This device may have been added with another device file.
[    10.143] (II) config/udev: Adding input device (unnamed) (/dev/ptyr4)
[    10.143] (II) No input driver specified, ignoring this device.
[    10.143] (II) This device may have been added with another device file.
[    10.143] (II) config/udev: Adding input device (unnamed) (/dev/ptyr5)
[    10.143] (II) No input driver specified, ignoring this device.
[    10.143] (II) This device may have been added with another device file.
[    10.144] (II) config/udev: Adding input device (unnamed) (/dev/ptyr6)
[    10.144] (II) No input driver specified, ignoring this device.
[    10.144] (II) This device may have been added with another device file.
[    10.145] (II) config/udev: Adding input device (unnamed) (/dev/ptyr7)
[    10.145] (II) No input driver specified, ignoring this device.
[    10.145] (II) This device may have been added with another device file.
[    10.145] (II) config/udev: Adding input device (unnamed) (/dev/ptyr8)
[    10.145] (II) No input driver specified, ignoring this device.
[    10.145] (II) This device may have been added with another device file.
[    10.146] (II) config/udev: Adding input device (unnamed) (/dev/ptyr9)
[    10.146] (II) No input driver specified, ignoring this device.
[    10.146] (II) This device may have been added with another device file.
[    10.146] (II) config/udev: Adding input device (unnamed) (/dev/ptyra)
[    10.147] (II) No input driver specified, ignoring this device.
[    10.147] (II) This device may have been added with another device file.
[    10.147] (II) config/udev: Adding input device (unnamed) (/dev/ptyrb)
[    10.147] (II) No input driver specified, ignoring this device.
[    10.147] (II) This device may have been added with another device file.
[    10.148] (II) config/udev: Adding input device (unnamed) (/dev/ptyrc)
[    10.148] (II) No input driver specified, ignoring this device.
[    10.148] (II) This device may have been added with another device file.
[    10.148] (II) config/udev: Adding input device (unnamed) (/dev/ptyrd)
[    10.148] (II) No input driver specified, ignoring this device.
[    10.148] (II) This device may have been added with another device file.
[    10.149] (II) config/udev: Adding input device (unnamed) (/dev/ptyre)
[    10.149] (II) No input driver specified, ignoring this device.
[    10.149] (II) This device may have been added with another device file.
[    10.149] (II) config/udev: Adding input device (unnamed) (/dev/ptyrf)
[    10.149] (II) No input driver specified, ignoring this device.
[    10.149] (II) This device may have been added with another device file.
[    10.150] (II) config/udev: Adding input device (unnamed) (/dev/ptys0)
[    10.150] (II) No input driver specified, ignoring this device.
[    10.150] (II) This device may have been added with another device file.
[    10.151] (II) config/udev: Adding input device (unnamed) (/dev/ptys1)
[    10.151] (II) No input driver specified, ignoring this device.
[    10.151] (II) This device may have been added with another device file.
[    10.151] (II) config/udev: Adding input device (unnamed) (/dev/ptys2)
[    10.151] (II) No input driver specified, ignoring this device.
[    10.151] (II) This device may have been added with another device file.
[    10.152] (II) config/udev: Adding input device (unnamed) (/dev/ptys3)
[    10.152] (II) No input driver specified, ignoring this device.
[    10.152] (II) This device may have been added with another device file.
[    10.152] (II) config/udev: Adding input device (unnamed) (/dev/ptys4)
[    10.153] (II) No input driver specified, ignoring this device.
[    10.153] (II) This device may have been added with another device file.
[    10.153] (II) config/udev: Adding input device (unnamed) (/dev/ptys5)
[    10.153] (II) No input driver specified, ignoring this device.
[    10.153] (II) This device may have been added with another device file.
[    10.153] (II) config/udev: Adding input device (unnamed) (/dev/ptys6)
[    10.154] (II) No input driver specified, ignoring this device.
[    10.154] (II) This device may have been added with another device file.
[    10.154] (II) config/udev: Adding input device (unnamed) (/dev/ptys7)
[    10.154] (II) No input driver specified, ignoring this device.
[    10.154] (II) This device may have been added with another device file.
[    10.155] (II) config/udev: Adding input device (unnamed) (/dev/ptys8)
[    10.155] (II) No input driver specified, ignoring this device.
[    10.155] (II) This device may have been added with another device file.
[    10.155] (II) config/udev: Adding input device (unnamed) (/dev/ptys9)
[    10.155] (II) No input driver specified, ignoring this device.
[    10.155] (II) This device may have been added with another device file.
[    10.156] (II) config/udev: Adding input device (unnamed) (/dev/ptysa)
[    10.156] (II) No input driver specified, ignoring this device.
[    10.156] (II) This device may have been added with another device file.
[    10.156] (II) config/udev: Adding input device (unnamed) (/dev/ptysb)
[    10.156] (II) No input driver specified, ignoring this device.
[    10.156] (II) This device may have been added with another device file.
[    10.157] (II) config/udev: Adding input device (unnamed) (/dev/ptysc)
[    10.157] (II) No input driver specified, ignoring this device.
[    10.157] (II) This device may have been added with another device file.
[    10.157] (II) config/udev: Adding input device (unnamed) (/dev/ptysd)
[    10.157] (II) No input driver specified, ignoring this device.
[    10.157] (II) This device may have been added with another device file.
[    10.158] (II) config/udev: Adding input device (unnamed) (/dev/ptyse)
[    10.158] (II) No input driver specified, ignoring this device.
[    10.158] (II) This device may have been added with another device file.
[    10.158] (II) config/udev: Adding input device (unnamed) (/dev/ptysf)
[    10.158] (II) No input driver specified, ignoring this device.
[    10.158] (II) This device may have been added with another device file.
[    10.159] (II) config/udev: Adding input device (unnamed) (/dev/ptyt0)
[    10.159] (II) No input driver specified, ignoring this device.
[    10.159] (II) This device may have been added with another device file.
[    10.159] (II) config/udev: Adding input device (unnamed) (/dev/ptyt1)
[    10.159] (II) No input driver specified, ignoring this device.
[    10.159] (II) This device may have been added with another device file.
[    10.160] (II) config/udev: Adding input device (unnamed) (/dev/ptyt2)
[    10.160] (II) No input driver specified, ignoring this device.
[    10.160] (II) This device may have been added with another device file.
[    10.161] (II) config/udev: Adding input device (unnamed) (/dev/ptyt3)
[    10.161] (II) No input driver specified, ignoring this device.
[    10.161] (II) This device may have been added with another device file.
[    10.161] (II) config/udev: Adding input device (unnamed) (/dev/ptyt4)
[    10.162] (II) No input driver specified, ignoring this device.
[    10.162] (II) This device may have been added with another device file.
[    10.162] (II) config/udev: Adding input device (unnamed) (/dev/ptyt5)
[    10.162] (II) No input driver specified, ignoring this device.
[    10.162] (II) This device may have been added with another device file.
[    10.163] (II) config/udev: Adding input device (unnamed) (/dev/ptyt6)
[    10.163] (II) No input driver specified, ignoring this device.
[    10.163] (II) This device may have been added with another device file.
[    10.163] (II) config/udev: Adding input device (unnamed) (/dev/ptyt7)
[    10.163] (II) No input driver specified, ignoring this device.
[    10.163] (II) This device may have been added with another device file.
[    10.164] (II) config/udev: Adding input device (unnamed) (/dev/ptyt8)
[    10.164] (II) No input driver specified, ignoring this device.
[    10.164] (II) This device may have been added with another device file.
[    10.164] (II) config/udev: Adding input device (unnamed) (/dev/ptyt9)
[    10.164] (II) No input driver specified, ignoring this device.
[    10.164] (II) This device may have been added with another device file.
[    10.165] (II) config/udev: Adding input device (unnamed) (/dev/ptyta)
[    10.165] (II) No input driver specified, ignoring this device.
[    10.165] (II) This device may have been added with another device file.
[    10.165] (II) config/udev: Adding input device (unnamed) (/dev/ptytb)
[    10.165] (II) No input driver specified, ignoring this device.
[    10.165] (II) This device may have been added with another device file.
[    10.166] (II) config/udev: Adding input device (unnamed) (/dev/ptytc)
[    10.166] (II) No input driver specified, ignoring this device.
[    10.166] (II) This device may have been added with another device file.
[    10.166] (II) config/udev: Adding input device (unnamed) (/dev/ptytd)
[    10.166] (II) No input driver specified, ignoring this device.
[    10.166] (II) This device may have been added with another device file.
[    10.167] (II) config/udev: Adding input device (unnamed) (/dev/ptyte)
[    10.167] (II) No input driver specified, ignoring this device.
[    10.167] (II) This device may have been added with another device file.
[    10.167] (II) config/udev: Adding input device (unnamed) (/dev/ptytf)
[    10.167] (II) No input driver specified, ignoring this device.
[    10.168] (II) This device may have been added with another device file.
[    10.168] (II) config/udev: Adding input device (unnamed) (/dev/ptyu0)
[    10.168] (II) No input driver specified, ignoring this device.
[    10.168] (II) This device may have been added with another device file.
[    10.168] (II) config/udev: Adding input device (unnamed) (/dev/ptyu1)
[    10.169] (II) No input driver specified, ignoring this device.
[    10.169] (II) This device may have been added with another device file.
[    10.169] (II) config/udev: Adding input device (unnamed) (/dev/ptyu2)
[    10.169] (II) No input driver specified, ignoring this device.
[    10.169] (II) This device may have been added with another device file.
[    10.170] (II) config/udev: Adding input device (unnamed) (/dev/ptyu3)
[    10.170] (II) No input driver specified, ignoring this device.
[    10.170] (II) This device may have been added with another device file.
[    10.170] (II) config/udev: Adding input device (unnamed) (/dev/ptyu4)
[    10.171] (II) No input driver specified, ignoring this device.
[    10.171] (II) This device may have been added with another device file.
[    10.171] (II) config/udev: Adding input device (unnamed) (/dev/ptyu5)
[    10.171] (II) No input driver specified, ignoring this device.
[    10.171] (II) This device may have been added with another device file.
[    10.172] (II) config/udev: Adding input device (unnamed) (/dev/ptyu6)
[    10.172] (II) No input driver specified, ignoring this device.
[    10.172] (II) This device may have been added with another device file.
[    10.172] (II) config/udev: Adding input device (unnamed) (/dev/ptyu7)
[    10.172] (II) No input driver specified, ignoring this device.
[    10.172] (II) This device may have been added with another device file.
[    10.173] (II) config/udev: Adding input device (unnamed) (/dev/ptyu8)
[    10.173] (II) No input driver specified, ignoring this device.
[    10.173] (II) This device may have been added with another device file.
[    10.173] (II) config/udev: Adding input device (unnamed) (/dev/ptyu9)
[    10.173] (II) No input driver specified, ignoring this device.
[    10.173] (II) This device may have been added with another device file.
[    10.174] (II) config/udev: Adding input device (unnamed) (/dev/ptyua)
[    10.174] (II) No input driver specified, ignoring this device.
[    10.174] (II) This device may have been added with another device file.
[    10.174] (II) config/udev: Adding input device (unnamed) (/dev/ptyub)
[    10.174] (II) No input driver specified, ignoring this device.
[    10.174] (II) This device may have been added with another device file.
[    10.175] (II) config/udev: Adding input device (unnamed) (/dev/ptyuc)
[    10.175] (II) No input driver specified, ignoring this device.
[    10.175] (II) This device may have been added with another device file.
[    10.175] (II) config/udev: Adding input device (unnamed) (/dev/ptyud)
[    10.175] (II) No input driver specified, ignoring this device.
[    10.175] (II) This device may have been added with another device file.
[    10.176] (II) config/udev: Adding input device (unnamed) (/dev/ptyue)
[    10.176] (II) No input driver specified, ignoring this device.
[    10.176] (II) This device may have been added with another device file.
[    10.176] (II) config/udev: Adding input device (unnamed) (/dev/ptyuf)
[    10.176] (II) No input driver specified, ignoring this device.
[    10.176] (II) This device may have been added with another device file.
[    10.177] (II) config/udev: Adding input device (unnamed) (/dev/ptyv0)
[    10.177] (II) No input driver specified, ignoring this device.
[    10.177] (II) This device may have been added with another device file.
[    10.177] (II) config/udev: Adding input device (unnamed) (/dev/ptyv1)
[    10.177] (II) No input driver specified, ignoring this device.
[    10.178] (II) This device may have been added with another device file.
[    10.178] (II) config/udev: Adding input device (unnamed) (/dev/ptyv2)
[    10.178] (II) No input driver specified, ignoring this device.
[    10.178] (II) This device may have been added with another device file.
[    10.178] (II) config/udev: Adding input device (unnamed) (/dev/ptyv3)
[    10.179] (II) No input driver specified, ignoring this device.
[    10.179] (II) This device may have been added with another device file.
[    10.179] (II) config/udev: Adding input device (unnamed) (/dev/ptyv4)
[    10.179] (II) No input driver specified, ignoring this device.
[    10.179] (II) This device may have been added with another device file.
[    10.180] (II) config/udev: Adding input device (unnamed) (/dev/ptyv5)
[    10.180] (II) No input driver specified, ignoring this device.
[    10.180] (II) This device may have been added with another device file.
[    10.181] (II) config/udev: Adding input device (unnamed) (/dev/ptyv6)
[    10.181] (II) No input driver specified, ignoring this device.
[    10.181] (II) This device may have been added with another device file.
[    10.181] (II) config/udev: Adding input device (unnamed) (/dev/ptyv7)
[    10.181] (II) No input driver specified, ignoring this device.
[    10.181] (II) This device may have been added with another device file.
[    10.182] (II) config/udev: Adding input device (unnamed) (/dev/ptyv8)
[    10.182] (II) No input driver specified, ignoring this device.
[    10.182] (II) This device may have been added with another device file.
[    10.182] (II) config/udev: Adding input device (unnamed) (/dev/ptyv9)
[    10.182] (II) No input driver specified, ignoring this device.
[    10.182] (II) This device may have been added with another device file.
[    10.183] (II) config/udev: Adding input device (unnamed) (/dev/ptyva)
[    10.183] (II) No input driver specified, ignoring this device.
[    10.183] (II) This device may have been added with another device file.
[    10.183] (II) config/udev: Adding input device (unnamed) (/dev/ptyvb)
[    10.183] (II) No input driver specified, ignoring this device.
[    10.183] (II) This device may have been added with another device file.
[    10.184] (II) config/udev: Adding input device (unnamed) (/dev/ptyvc)
[    10.184] (II) No input driver specified, ignoring this device.
[    10.184] (II) This device may have been added with another device file.
[    10.184] (II) config/udev: Adding input device (unnamed) (/dev/ptyvd)
[    10.184] (II) No input driver specified, ignoring this device.
[    10.184] (II) This device may have been added with another device file.
[    10.185] (II) config/udev: Adding input device (unnamed) (/dev/ptyve)
[    10.185] (II) No input driver specified, ignoring this device.
[    10.185] (II) This device may have been added with another device file.
[    10.185] (II) config/udev: Adding input device (unnamed) (/dev/ptyvf)
[    10.185] (II) No input driver specified, ignoring this device.
[    10.186] (II) This device may have been added with another device file.
[    10.186] (II) config/udev: Adding input device (unnamed) (/dev/ptyw0)
[    10.186] (II) No input driver specified, ignoring this device.
[    10.186] (II) This device may have been added with another device file.
[    10.186] (II) config/udev: Adding input device (unnamed) (/dev/ptyw1)
[    10.187] (II) No input driver specified, ignoring this device.
[    10.187] (II) This device may have been added with another device file.
[    10.187] (II) config/udev: Adding input device (unnamed) (/dev/ptyw2)
[    10.187] (II) No input driver specified, ignoring this device.
[    10.187] (II) This device may have been added with another device file.
[    10.188] (II) config/udev: Adding input device (unnamed) (/dev/ptyw3)
[    10.188] (II) No input driver specified, ignoring this device.
[    10.188] (II) This device may have been added with another device file.
[    10.188] (II) config/udev: Adding input device (unnamed) (/dev/ptyw4)
[    10.188] (II) No input driver specified, ignoring this device.
[    10.188] (II) This device may have been added with another device file.
[    10.189] (II) config/udev: Adding input device (unnamed) (/dev/ptyw5)
[    10.189] (II) No input driver specified, ignoring this device.
[    10.189] (II) This device may have been added with another device file.
[    10.189] (II) config/udev: Adding input device (unnamed) (/dev/ptyw6)
[    10.189] (II) No input driver specified, ignoring this device.
[    10.189] (II) This device may have been added with another device file.
[    10.190] (II) config/udev: Adding input device (unnamed) (/dev/ptyw7)
[    10.190] (II) No input driver specified, ignoring this device.
[    10.190] (II) This device may have been added with another device file.
[    10.191] (II) config/udev: Adding input device (unnamed) (/dev/ptyw8)
[    10.191] (II) No input driver specified, ignoring this device.
[    10.191] (II) This device may have been added with another device file.
[    10.191] (II) config/udev: Adding input device (unnamed) (/dev/ptyw9)
[    10.191] (II) No input driver specified, ignoring this device.
[    10.191] (II) This device may have been added with another device file.
[    10.192] (II) config/udev: Adding input device (unnamed) (/dev/ptywa)
[    10.192] (II) No input driver specified, ignoring this device.
[    10.192] (II) This device may have been added with another device file.
[    10.192] (II) config/udev: Adding input device (unnamed) (/dev/ptywb)
[    10.192] (II) No input driver specified, ignoring this device.
[    10.192] (II) This device may have been added with another device file.
[    10.193] (II) config/udev: Adding input device (unnamed) (/dev/ptywc)
[    10.193] (II) No input driver specified, ignoring this device.
[    10.193] (II) This device may have been added with another device file.
[    10.193] (II) config/udev: Adding input device (unnamed) (/dev/ptywd)
[    10.193] (II) No input driver specified, ignoring this device.
[    10.193] (II) This device may have been added with another device file.
[    10.194] (II) config/udev: Adding input device (unnamed) (/dev/ptywe)
[    10.194] (II) No input driver specified, ignoring this device.
[    10.194] (II) This device may have been added with another device file.
[    10.194] (II) config/udev: Adding input device (unnamed) (/dev/ptywf)
[    10.194] (II) No input driver specified, ignoring this device.
[    10.194] (II) This device may have been added with another device file.
[    10.195] (II) config/udev: Adding input device (unnamed) (/dev/ptyx0)
[    10.195] (II) No input driver specified, ignoring this device.
[    10.195] (II) This device may have been added with another device file.
[    10.195] (II) config/udev: Adding input device (unnamed) (/dev/ptyx1)
[    10.195] (II) No input driver specified, ignoring this device.
[    10.196] (II) This device may have been added with another device file.
[    10.196] (II) config/udev: Adding input device (unnamed) (/dev/ptyx2)
[    10.196] (II) No input driver specified, ignoring this device.
[    10.196] (II) This device may have been added with another device file.
[    10.196] (II) config/udev: Adding input device (unnamed) (/dev/ptyx3)
[    10.197] (II) No input driver specified, ignoring this device.
[    10.197] (II) This device may have been added with another device file.
[    10.197] (II) config/udev: Adding input device (unnamed) (/dev/ptyx4)
[    10.197] (II) No input driver specified, ignoring this device.
[    10.197] (II) This device may have been added with another device file.
[    10.198] (II) config/udev: Adding input device (unnamed) (/dev/ptyx5)
[    10.198] (II) No input driver specified, ignoring this device.
[    10.198] (II) This device may have been added with another device file.
[    10.198] (II) config/udev: Adding input device (unnamed) (/dev/ptyx6)
[    10.198] (II) No input driver specified, ignoring this device.
[    10.198] (II) This device may have been added with another device file.
[    10.199] (II) config/udev: Adding input device (unnamed) (/dev/ptyx7)
[    10.199] (II) No input driver specified, ignoring this device.
[    10.199] (II) This device may have been added with another device file.
[    10.199] (II) config/udev: Adding input device (unnamed) (/dev/ptyx8)
[    10.199] (II) No input driver specified, ignoring this device.
[    10.199] (II) This device may have been added with another device file.
[    10.200] (II) config/udev: Adding input device (unnamed) (/dev/ptyx9)
[    10.200] (II) No input driver specified, ignoring this device.
[    10.200] (II) This device may have been added with another device file.
[    10.201] (II) config/udev: Adding input device (unnamed) (/dev/ptyxa)
[    10.201] (II) No input driver specified, ignoring this device.
[    10.201] (II) This device may have been added with another device file.
[    10.201] (II) config/udev: Adding input device (unnamed) (/dev/ptyxb)
[    10.201] (II) No input driver specified, ignoring this device.
[    10.201] (II) This device may have been added with another device file.
[    10.202] (II) config/udev: Adding input device (unnamed) (/dev/ptyxc)
[    10.202] (II) No input driver specified, ignoring this device.
[    10.202] (II) This device may have been added with another device file.
[    10.202] (II) config/udev: Adding input device (unnamed) (/dev/ptyxd)
[    10.202] (II) No input driver specified, ignoring this device.
[    10.202] (II) This device may have been added with another device file.
[    10.203] (II) config/udev: Adding input device (unnamed) (/dev/ptyxe)
[    10.203] (II) No input driver specified, ignoring this device.
[    10.203] (II) This device may have been added with another device file.
[    10.203] (II) config/udev: Adding input device (unnamed) (/dev/ptyxf)
[    10.203] (II) No input driver specified, ignoring this device.
[    10.204] (II) This device may have been added with another device file.
[    10.204] (II) config/udev: Adding input device (unnamed) (/dev/ptyy0)
[    10.204] (II) No input driver specified, ignoring this device.
[    10.204] (II) This device may have been added with another device file.
[    10.204] (II) config/udev: Adding input device (unnamed) (/dev/ptyy1)
[    10.205] (II) No input driver specified, ignoring this device.
[    10.205] (II) This device may have been added with another device file.
[    10.205] (II) config/udev: Adding input device (unnamed) (/dev/ptyy2)
[    10.205] (II) No input driver specified, ignoring this device.
[    10.205] (II) This device may have been added with another device file.
[    10.206] (II) config/udev: Adding input device (unnamed) (/dev/ptyy3)
[    10.206] (II) No input driver specified, ignoring this device.
[    10.206] (II) This device may have been added with another device file.
[    10.206] (II) config/udev: Adding input device (unnamed) (/dev/ptyy4)
[    10.206] (II) No input driver specified, ignoring this device.
[    10.206] (II) This device may have been added with another device file.
[    10.207] (II) config/udev: Adding input device (unnamed) (/dev/ptyy5)
[    10.207] (II) No input driver specified, ignoring this device.
[    10.207] (II) This device may have been added with another device file.
[    10.207] (II) config/udev: Adding input device (unnamed) (/dev/ptyy6)
[    10.207] (II) No input driver specified, ignoring this device.
[    10.207] (II) This device may have been added with another device file.
[    10.208] (II) config/udev: Adding input device (unnamed) (/dev/ptyy7)
[    10.208] (II) No input driver specified, ignoring this device.
[    10.208] (II) This device may have been added with another device file.
[    10.208] (II) config/udev: Adding input device (unnamed) (/dev/ptyy8)
[    10.208] (II) No input driver specified, ignoring this device.
[    10.208] (II) This device may have been added with another device file.
[    10.209] (II) config/udev: Adding input device (unnamed) (/dev/ptyy9)
[    10.209] (II) No input driver specified, ignoring this device.
[    10.209] (II) This device may have been added with another device file.
[    10.209] (II) config/udev: Adding input device (unnamed) (/dev/ptyya)
[    10.209] (II) No input driver specified, ignoring this device.
[    10.209] (II) This device may have been added with another device file.
[    10.210] (II) config/udev: Adding input device (unnamed) (/dev/ptyyb)
[    10.210] (II) No input driver specified, ignoring this device.
[    10.210] (II) This device may have been added with another device file.
[    10.211] (II) config/udev: Adding input device (unnamed) (/dev/ptyyc)
[    10.211] (II) No input driver specified, ignoring this device.
[    10.211] (II) This device may have been added with another device file.
[    10.211] (II) config/udev: Adding input device (unnamed) (/dev/ptyyd)
[    10.211] (II) No input driver specified, ignoring this device.
[    10.211] (II) This device may have been added with another device file.
[    10.212] (II) config/udev: Adding input device (unnamed) (/dev/ptyye)
[    10.212] (II) No input driver specified, ignoring this device.
[    10.212] (II) This device may have been added with another device file.
[    10.212] (II) config/udev: Adding input device (unnamed) (/dev/ptyyf)
[    10.212] (II) No input driver specified, ignoring this device.
[    10.212] (II) This device may have been added with another device file.
[    10.213] (II) config/udev: Adding input device (unnamed) (/dev/ptyz0)
[    10.213] (II) No input driver specified, ignoring this device.
[    10.213] (II) This device may have been added with another device file.
[    10.213] (II) config/udev: Adding input device (unnamed) (/dev/ptyz1)
[    10.213] (II) No input driver specified, ignoring this device.
[    10.214] (II) This device may have been added with another device file.
[    10.214] (II) config/udev: Adding input device (unnamed) (/dev/ptyz2)
[    10.214] (II) No input driver specified, ignoring this device.
[    10.214] (II) This device may have been added with another device file.
[    10.215] (II) config/udev: Adding input device (unnamed) (/dev/ptyz3)
[    10.215] (II) No input driver specified, ignoring this device.
[    10.215] (II) This device may have been added with another device file.
[    10.215] (II) config/udev: Adding input device (unnamed) (/dev/ptyz4)
[    10.215] (II) No input driver specified, ignoring this device.
[    10.215] (II) This device may have been added with another device file.
[    10.216] (II) config/udev: Adding input device (unnamed) (/dev/ptyz5)
[    10.216] (II) No input driver specified, ignoring this device.
[    10.216] (II) This device may have been added with another device file.
[    10.216] (II) config/udev: Adding input device (unnamed) (/dev/ptyz6)
[    10.216] (II) No input driver specified, ignoring this device.
[    10.216] (II) This device may have been added with another device file.
[    10.217] (II) config/udev: Adding input device (unnamed) (/dev/ptyz7)
[    10.217] (II) No input driver specified, ignoring this device.
[    10.217] (II) This device may have been added with another device file.
[    10.217] (II) config/udev: Adding input device (unnamed) (/dev/ptyz8)
[    10.217] (II) No input driver specified, ignoring this device.
[    10.217] (II) This device may have been added with another device file.
[    10.218] (II) config/udev: Adding input device (unnamed) (/dev/ptyz9)
[    10.218] (II) No input driver specified, ignoring this device.
[    10.218] (II) This device may have been added with another device file.
[    10.218] (II) config/udev: Adding input device (unnamed) (/dev/ptyza)
[    10.218] (II) No input driver specified, ignoring this device.
[    10.218] (II) This device may have been added with another device file.
[    10.219] (II) config/udev: Adding input device (unnamed) (/dev/ptyzb)
[    10.219] (II) No input driver specified, ignoring this device.
[    10.219] (II) This device may have been added with another device file.
[    10.219] (II) config/udev: Adding input device (unnamed) (/dev/ptyzc)
[    10.219] (II) No input driver specified, ignoring this device.
[    10.220] (II) This device may have been added with another device file.
[    10.220] (II) config/udev: Adding input device (unnamed) (/dev/ptyzd)
[    10.220] (II) No input driver specified, ignoring this device.
[    10.220] (II) This device may have been added with another device file.
[    10.221] (II) config/udev: Adding input device (unnamed) (/dev/ptyze)
[    10.221] (II) No input driver specified, ignoring this device.
[    10.221] (II) This device may have been added with another device file.
[    10.221] (II) config/udev: Adding input device (unnamed) (/dev/ptyzf)
[    10.222] (II) No input driver specified, ignoring this device.
[    10.222] (II) This device may have been added with another device file.
[    10.222] (II) config/udev: Adding input device (unnamed) (/dev/tty)
[    10.222] (II) No input driver specified, ignoring this device.
[    10.222] (II) This device may have been added with another device file.
[    10.223] (II) config/udev: Adding input device (unnamed) (/dev/tty0)
[    10.223] (II) No input driver specified, ignoring this device.
[    10.223] (II) This device may have been added with another device file.
[    10.223] (II) config/udev: Adding input device (unnamed) (/dev/tty1)
[    10.223] (II) No input driver specified, ignoring this device.
[    10.223] (II) This device may have been added with another device file.
[    10.224] (II) config/udev: Adding input device (unnamed) (/dev/tty10)
[    10.224] (II) No input driver specified, ignoring this device.
[    10.224] (II) This device may have been added with another device file.
[    10.224] (II) config/udev: Adding input device (unnamed) (/dev/tty11)
[    10.224] (II) No input driver specified, ignoring this device.
[    10.224] (II) This device may have been added with another device file.
[    10.225] (II) config/udev: Adding input device (unnamed) (/dev/tty12)
[    10.225] (II) No input driver specified, ignoring this device.
[    10.225] (II) This device may have been added with another device file.
[    10.225] (II) config/udev: Adding input device (unnamed) (/dev/tty13)
[    10.225] (II) No input driver specified, ignoring this device.
[    10.225] (II) This device may have been added with another device file.
[    10.226] (II) config/udev: Adding input device (unnamed) (/dev/tty14)
[    10.226] (II) No input driver specified, ignoring this device.
[    10.226] (II) This device may have been added with another device file.
[    10.226] (II) config/udev: Adding input device (unnamed) (/dev/tty15)
[    10.226] (II) No input driver specified, ignoring this device.
[    10.226] (II) This device may have been added with another device file.
[    10.227] (II) config/udev: Adding input device (unnamed) (/dev/tty16)
[    10.227] (II) No input driver specified, ignoring this device.
[    10.227] (II) This device may have been added with another device file.
[    10.227] (II) config/udev: Adding input device (unnamed) (/dev/tty17)
[    10.227] (II) No input driver specified, ignoring this device.
[    10.227] (II) This device may have been added with another device file.
[    10.228] (II) config/udev: Adding input device (unnamed) (/dev/tty18)
[    10.228] (II) No input driver specified, ignoring this device.
[    10.228] (II) This device may have been added with another device file.
[    10.228] (II) config/udev: Adding input device (unnamed) (/dev/tty19)
[    10.228] (II) No input driver specified, ignoring this device.
[    10.228] (II) This device may have been added with another device file.
[    10.229] (II) config/udev: Adding input device (unnamed) (/dev/tty2)
[    10.229] (II) No input driver specified, ignoring this device.
[    10.229] (II) This device may have been added with another device file.
[    10.229] (II) config/udev: Adding input device (unnamed) (/dev/tty20)
[    10.229] (II) No input driver specified, ignoring this device.
[    10.229] (II) This device may have been added with another device file.
[    10.230] (II) config/udev: Adding input device (unnamed) (/dev/tty21)
[    10.230] (II) No input driver specified, ignoring this device.
[    10.230] (II) This device may have been added with another device file.
[    10.231] (II) config/udev: Adding input device (unnamed) (/dev/tty22)
[    10.231] (II) No input driver specified, ignoring this device.
[    10.231] (II) This device may have been added with another device file.
[    10.231] (II) config/udev: Adding input device (unnamed) (/dev/tty23)
[    10.231] (II) No input driver specified, ignoring this device.
[    10.232] (II) This device may have been added with another device file.
[    10.232] (II) config/udev: Adding input device (unnamed) (/dev/tty24)
[    10.232] (II) No input driver specified, ignoring this device.
[    10.232] (II) This device may have been added with another device file.
[    10.233] (II) config/udev: Adding input device (unnamed) (/dev/tty25)
[    10.233] (II) No input driver specified, ignoring this device.
[    10.233] (II) This device may have been added with another device file.
[    10.233] (II) config/udev: Adding input device (unnamed) (/dev/tty26)
[    10.233] (II) No input driver specified, ignoring this device.
[    10.233] (II) This device may have been added with another device file.
[    10.234] (II) config/udev: Adding input device (unnamed) (/dev/tty27)
[    10.234] (II) No input driver specified, ignoring this device.
[    10.234] (II) This device may have been added with another device file.
[    10.234] (II) config/udev: Adding input device (unnamed) (/dev/tty28)
[    10.234] (II) No input driver specified, ignoring this device.
[    10.234] (II) This device may have been added with another device file.
[    10.235] (II) config/udev: Adding input device (unnamed) (/dev/tty29)
[    10.235] (II) No input driver specified, ignoring this device.
[    10.235] (II) This device may have been added with another device file.
[    10.235] (II) config/udev: Adding input device (unnamed) (/dev/tty3)
[    10.235] (II) No input driver specified, ignoring this device.
[    10.235] (II) This device may have been added with another device file.
[    10.236] (II) config/udev: Adding input device (unnamed) (/dev/tty30)
[    10.236] (II) No input driver specified, ignoring this device.
[    10.236] (II) This device may have been added with another device file.
[    10.236] (II) config/udev: Adding input device (unnamed) (/dev/tty31)
[    10.236] (II) No input driver specified, ignoring this device.
[    10.236] (II) This device may have been added with another device file.
[    10.237] (II) config/udev: Adding input device (unnamed) (/dev/tty32)
[    10.237] (II) No input driver specified, ignoring this device.
[    10.237] (II) This device may have been added with another device file.
[    10.237] (II) config/udev: Adding input device (unnamed) (/dev/tty33)
[    10.237] (II) No input driver specified, ignoring this device.
[    10.238] (II) This device may have been added with another device file.
[    10.238] (II) config/udev: Adding input device (unnamed) (/dev/tty34)
[    10.238] (II) No input driver specified, ignoring this device.
[    10.238] (II) This device may have been added with another device file.
[    10.238] (II) config/udev: Adding input device (unnamed) (/dev/tty35)
[    10.239] (II) No input driver specified, ignoring this device.
[    10.239] (II) This device may have been added with another device file.
[    10.239] (II) config/udev: Adding input device (unnamed) (/dev/tty36)
[    10.239] (II) No input driver specified, ignoring this device.
[    10.239] (II) This device may have been added with another device file.
[    10.240] (II) config/udev: Adding input device (unnamed) (/dev/tty37)
[    10.240] (II) No input driver specified, ignoring this device.
[    10.240] (II) This device may have been added with another device file.
[    10.240] (II) config/udev: Adding input device (unnamed) (/dev/tty38)
[    10.240] (II) No input driver specified, ignoring this device.
[    10.240] (II) This device may have been added with another device file.
[    10.241] (II) config/udev: Adding input device (unnamed) (/dev/tty39)
[    10.241] (II) No input driver specified, ignoring this device.
[    10.241] (II) This device may have been added with another device file.
[    10.242] (II) config/udev: Adding input device (unnamed) (/dev/tty4)
[    10.242] (II) No input driver specified, ignoring this device.
[    10.242] (II) This device may have been added with another device file.
[    10.242] (II) config/udev: Adding input device (unnamed) (/dev/tty40)
[    10.242] (II) No input driver specified, ignoring this device.
[    10.242] (II) This device may have been added with another device file.
[    10.243] (II) config/udev: Adding input device (unnamed) (/dev/tty41)
[    10.243] (II) No input driver specified, ignoring this device.
[    10.243] (II) This device may have been added with another device file.
[    10.243] (II) config/udev: Adding input device (unnamed) (/dev/tty42)
[    10.243] (II) No input driver specified, ignoring this device.
[    10.243] (II) This device may have been added with another device file.
[    10.244] (II) config/udev: Adding input device (unnamed) (/dev/tty43)
[    10.244] (II) No input driver specified, ignoring this device.
[    10.244] (II) This device may have been added with another device file.
[    10.244] (II) config/udev: Adding input device (unnamed) (/dev/tty44)
[    10.244] (II) No input driver specified, ignoring this device.
[    10.244] (II) This device may have been added with another device file.
[    10.245] (II) config/udev: Adding input device (unnamed) (/dev/tty45)
[    10.245] (II) No input driver specified, ignoring this device.
[    10.245] (II) This device may have been added with another device file.
[    10.245] (II) config/udev: Adding input device (unnamed) (/dev/tty46)
[    10.245] (II) No input driver specified, ignoring this device.
[    10.245] (II) This device may have been added with another device file.
[    10.246] (II) config/udev: Adding input device (unnamed) (/dev/tty47)
[    10.246] (II) No input driver specified, ignoring this device.
[    10.246] (II) This device may have been added with another device file.
[    10.246] (II) config/udev: Adding input device (unnamed) (/dev/tty48)
[    10.246] (II) No input driver specified, ignoring this device.
[    10.246] (II) This device may have been added with another device file.
[    10.247] (II) config/udev: Adding input device (unnamed) (/dev/tty49)
[    10.247] (II) No input driver specified, ignoring this device.
[    10.247] (II) This device may have been added with another device file.
[    10.247] (II) config/udev: Adding input device (unnamed) (/dev/tty5)
[    10.247] (II) No input driver specified, ignoring this device.
[    10.247] (II) This device may have been added with another device file.
[    10.248] (II) config/udev: Adding input device (unnamed) (/dev/tty50)
[    10.248] (II) No input driver specified, ignoring this device.
[    10.248] (II) This device may have been added with another device file.
[    10.248] (II) config/udev: Adding input device (unnamed) (/dev/tty51)
[    10.248] (II) No input driver specified, ignoring this device.
[    10.249] (II) This device may have been added with another device file.
[    10.249] (II) config/udev: Adding input device (unnamed) (/dev/tty52)
[    10.249] (II) No input driver specified, ignoring this device.
[    10.249] (II) This device may have been added with another device file.
[    10.249] (II) config/udev: Adding input device (unnamed) (/dev/tty53)
[    10.250] (II) No input driver specified, ignoring this device.
[    10.250] (II) This device may have been added with another device file.
[    10.250] (II) config/udev: Adding input device (unnamed) (/dev/tty54)
[    10.251] (II) No input driver specified, ignoring this device.
[    10.251] (II) This device may have been added with another device file.
[    10.251] (II) config/udev: Adding input device (unnamed) (/dev/tty55)
[    10.251] (II) No input driver specified, ignoring this device.
[    10.251] (II) This device may have been added with another device file.
[    10.252] (II) config/udev: Adding input device (unnamed) (/dev/tty56)
[    10.252] (II) No input driver specified, ignoring this device.
[    10.252] (II) This device may have been added with another device file.
[    10.252] (II) config/udev: Adding input device (unnamed) (/dev/tty57)
[    10.252] (II) No input driver specified, ignoring this device.
[    10.252] (II) This device may have been added with another device file.
[    10.253] (II) config/udev: Adding input device (unnamed) (/dev/tty58)
[    10.253] (II) No input driver specified, ignoring this device.
[    10.253] (II) This device may have been added with another device file.
[    10.253] (II) config/udev: Adding input device (unnamed) (/dev/tty59)
[    10.253] (II) No input driver specified, ignoring this device.
[    10.253] (II) This device may have been added with another device file.
[    10.254] (II) config/udev: Adding input device (unnamed) (/dev/tty6)
[    10.254] (II) No input driver specified, ignoring this device.
[    10.254] (II) This device may have been added with another device file.
[    10.254] (II) config/udev: Adding input device (unnamed) (/dev/tty60)
[    10.254] (II) No input driver specified, ignoring this device.
[    10.254] (II) This device may have been added with another device file.
[    10.255] (II) config/udev: Adding input device (unnamed) (/dev/tty61)
[    10.255] (II) No input driver specified, ignoring this device.
[    10.255] (II) This device may have been added with another device file.
[    10.255] (II) config/udev: Adding input device (unnamed) (/dev/tty62)
[    10.255] (II) No input driver specified, ignoring this device.
[    10.255] (II) This device may have been added with another device file.
[    10.256] (II) config/udev: Adding input device (unnamed) (/dev/tty63)
[    10.256] (II) No input driver specified, ignoring this device.
[    10.256] (II) This device may have been added with another device file.
[    10.256] (II) config/udev: Adding input device (unnamed) (/dev/tty7)
[    10.256] (II) No input driver specified, ignoring this device.
[    10.256] (II) This device may have been added with another device file.
[    10.257] (II) config/udev: Adding input device (unnamed) (/dev/tty8)
[    10.257] (II) No input driver specified, ignoring this device.
[    10.257] (II) This device may have been added with another device file.
[    10.257] (II) config/udev: Adding input device (unnamed) (/dev/tty9)
[    10.258] (II) No input driver specified, ignoring this device.
[    10.258] (II) This device may have been added with another device file.
[    10.258] (II) config/udev: Adding input device (unnamed) (/dev/ttya0)
[    10.258] (II) No input driver specified, ignoring this device.
[    10.258] (II) This device may have been added with another device file.
[    10.259] (II) config/udev: Adding input device (unnamed) (/dev/ttya1)
[    10.259] (II) No input driver specified, ignoring this device.
[    10.259] (II) This device may have been added with another device file.
[    10.259] (II) config/udev: Adding input device (unnamed) (/dev/ttya2)
[    10.259] (II) No input driver specified, ignoring this device.
[    10.259] (II) This device may have been added with another device file.
[    10.260] (II) config/udev: Adding input device (unnamed) (/dev/ttya3)
[    10.260] (II) No input driver specified, ignoring this device.
[    10.260] (II) This device may have been added with another device file.
[    10.260] (II) config/udev: Adding input device (unnamed) (/dev/ttya4)
[    10.261] (II) No input driver specified, ignoring this device.
[    10.261] (II) This device may have been added with another device file.
[    10.261] (II) config/udev: Adding input device (unnamed) (/dev/ttya5)
[    10.261] (II) No input driver specified, ignoring this device.
[    10.261] (II) This device may have been added with another device file.
[    10.262] (II) config/udev: Adding input device (unnamed) (/dev/ttya6)
[    10.262] (II) No input driver specified, ignoring this device.
[    10.262] (II) This device may have been added with another device file.
[    10.262] (II) config/udev: Adding input device (unnamed) (/dev/ttya7)
[    10.262] (II) No input driver specified, ignoring this device.
[    10.262] (II) This device may have been added with another device file.
[    10.263] (II) config/udev: Adding input device (unnamed) (/dev/ttya8)
[    10.263] (II) No input driver specified, ignoring this device.
[    10.263] (II) This device may have been added with another device file.
[    10.263] (II) config/udev: Adding input device (unnamed) (/dev/ttya9)
[    10.263] (II) No input driver specified, ignoring this device.
[    10.263] (II) This device may have been added with another device file.
[    10.264] (II) config/udev: Adding input device (unnamed) (/dev/ttyaa)
[    10.264] (II) No input driver specified, ignoring this device.
[    10.264] (II) This device may have been added with another device file.
[    10.264] (II) config/udev: Adding input device (unnamed) (/dev/ttyab)
[    10.264] (II) No input driver specified, ignoring this device.
[    10.264] (II) This device may have been added with another device file.
[    10.265] (II) config/udev: Adding input device (unnamed) (/dev/ttyac)
[    10.265] (II) No input driver specified, ignoring this device.
[    10.265] (II) This device may have been added with another device file.
[    10.265] (II) config/udev: Adding input device (unnamed) (/dev/ttyad)
[    10.265] (II) No input driver specified, ignoring this device.
[    10.265] (II) This device may have been added with another device file.
[    10.266] (II) config/udev: Adding input device (unnamed) (/dev/ttyae)
[    10.266] (II) No input driver specified, ignoring this device.
[    10.266] (II) This device may have been added with another device file.
[    10.266] (II) config/udev: Adding input device (unnamed) (/dev/ttyaf)
[    10.266] (II) No input driver specified, ignoring this device.
[    10.266] (II) This device may have been added with another device file.
[    10.267] (II) config/udev: Adding input device (unnamed) (/dev/ttyb0)
[    10.267] (II) No input driver specified, ignoring this device.
[    10.267] (II) This device may have been added with another device file.
[    10.267] (II) config/udev: Adding input device (unnamed) (/dev/ttyb1)
[    10.268] (II) No input driver specified, ignoring this device.
[    10.268] (II) This device may have been added with another device file.
[    10.268] (II) config/udev: Adding input device (unnamed) (/dev/ttyb2)
[    10.268] (II) No input driver specified, ignoring this device.
[    10.268] (II) This device may have been added with another device file.
[    10.269] (II) config/udev: Adding input device (unnamed) (/dev/ttyb3)
[    10.269] (II) No input driver specified, ignoring this device.
[    10.269] (II) This device may have been added with another device file.
[    10.269] (II) config/udev: Adding input device (unnamed) (/dev/ttyb4)
[    10.269] (II) No input driver specified, ignoring this device.
[    10.269] (II) This device may have been added with another device file.
[    10.270] (II) config/udev: Adding input device (unnamed) (/dev/ttyb5)
[    10.270] (II) No input driver specified, ignoring this device.
[    10.270] (II) This device may have been added with another device file.
[    10.271] (II) config/udev: Adding input device (unnamed) (/dev/ttyb6)
[    10.271] (II) No input driver specified, ignoring this device.
[    10.271] (II) This device may have been added with another device file.
[    10.271] (II) config/udev: Adding input device (unnamed) (/dev/ttyb7)
[    10.271] (II) No input driver specified, ignoring this device.
[    10.271] (II) This device may have been added with another device file.
[    10.272] (II) config/udev: Adding input device (unnamed) (/dev/ttyb8)
[    10.272] (II) No input driver specified, ignoring this device.
[    10.272] (II) This device may have been added with another device file.
[    10.272] (II) config/udev: Adding input device (unnamed) (/dev/ttyb9)
[    10.272] (II) No input driver specified, ignoring this device.
[    10.272] (II) This device may have been added with another device file.
[    10.273] (II) config/udev: Adding input device (unnamed) (/dev/ttyba)
[    10.273] (II) No input driver specified, ignoring this device.
[    10.273] (II) This device may have been added with another device file.
[    10.273] (II) config/udev: Adding input device (unnamed) (/dev/ttybb)
[    10.273] (II) No input driver specified, ignoring this device.
[    10.273] (II) This device may have been added with another device file.
[    10.274] (II) config/udev: Adding input device (unnamed) (/dev/ttybc)
[    10.274] (II) No input driver specified, ignoring this device.
[    10.274] (II) This device may have been added with another device file.
[    10.274] (II) config/udev: Adding input device (unnamed) (/dev/ttybd)
[    10.274] (II) No input driver specified, ignoring this device.
[    10.274] (II) This device may have been added with another device file.
[    10.275] (II) config/udev: Adding input device (unnamed) (/dev/ttybe)
[    10.275] (II) No input driver specified, ignoring this device.
[    10.275] (II) This device may have been added with another device file.
[    10.275] (II) config/udev: Adding input device (unnamed) (/dev/ttybf)
[    10.276] (II) No input driver specified, ignoring this device.
[    10.276] (II) This device may have been added with another device file.
[    10.276] (II) config/udev: Adding input device (unnamed) (/dev/ttyc0)
[    10.276] (II) No input driver specified, ignoring this device.
[    10.276] (II) This device may have been added with another device file.
[    10.277] (II) config/udev: Adding input device (unnamed) (/dev/ttyc1)
[    10.277] (II) No input driver specified, ignoring this device.
[    10.277] (II) This device may have been added with another device file.
[    10.277] (II) config/udev: Adding input device (unnamed) (/dev/ttyc2)
[    10.277] (II) No input driver specified, ignoring this device.
[    10.277] (II) This device may have been added with another device file.
[    10.278] (II) config/udev: Adding input device (unnamed) (/dev/ttyc3)
[    10.278] (II) No input driver specified, ignoring this device.
[    10.278] (II) This device may have been added with another device file.
[    10.278] (II) config/udev: Adding input device (unnamed) (/dev/ttyc4)
[    10.278] (II) No input driver specified, ignoring this device.
[    10.278] (II) This device may have been added with another device file.
[    10.279] (II) config/udev: Adding input device (unnamed) (/dev/ttyc5)
[    10.279] (II) No input driver specified, ignoring this device.
[    10.279] (II) This device may have been added with another device file.
[    10.279] (II) config/udev: Adding input device (unnamed) (/dev/ttyc6)
[    10.279] (II) No input driver specified, ignoring this device.
[    10.279] (II) This device may have been added with another device file.
[    10.280] (II) config/udev: Adding input device (unnamed) (/dev/ttyc7)
[    10.280] (II) No input driver specified, ignoring this device.
[    10.280] (II) This device may have been added with another device file.
[    10.281] (II) config/udev: Adding input device (unnamed) (/dev/ttyc8)
[    10.281] (II) No input driver specified, ignoring this device.
[    10.281] (II) This device may have been added with another device file.
[    10.281] (II) config/udev: Adding input device (unnamed) (/dev/ttyc9)
[    10.281] (II) No input driver specified, ignoring this device.
[    10.281] (II) This device may have been added with another device file.
[    10.282] (II) config/udev: Adding input device (unnamed) (/dev/ttyca)
[    10.282] (II) No input driver specified, ignoring this device.
[    10.282] (II) This device may have been added with another device file.
[    10.282] (II) config/udev: Adding input device (unnamed) (/dev/ttycb)
[    10.282] (II) No input driver specified, ignoring this device.
[    10.282] (II) This device may have been added with another device file.
[    10.283] (II) config/udev: Adding input device (unnamed) (/dev/ttycc)
[    10.283] (II) No input driver specified, ignoring this device.
[    10.283] (II) This device may have been added with another device file.
[    10.283] (II) config/udev: Adding input device (unnamed) (/dev/ttycd)
[    10.283] (II) No input driver specified, ignoring this device.
[    10.283] (II) This device may have been added with another device file.
[    10.284] (II) config/udev: Adding input device (unnamed) (/dev/ttyce)
[    10.284] (II) No input driver specified, ignoring this device.
[    10.284] (II) This device may have been added with another device file.
[    10.284] (II) config/udev: Adding input device (unnamed) (/dev/ttycf)
[    10.284] (II) No input driver specified, ignoring this device.
[    10.284] (II) This device may have been added with another device file.
[    10.285] (II) config/udev: Adding input device (unnamed) (/dev/ttyd0)
[    10.285] (II) No input driver specified, ignoring this device.
[    10.285] (II) This device may have been added with another device file.
[    10.286] (II) config/udev: Adding input device (unnamed) (/dev/ttyd1)
[    10.286] (II) No input driver specified, ignoring this device.
[    10.286] (II) This device may have been added with another device file.
[    10.286] (II) config/udev: Adding input device (unnamed) (/dev/ttyd2)
[    10.286] (II) No input driver specified, ignoring this device.
[    10.286] (II) This device may have been added with another device file.
[    10.287] (II) config/udev: Adding input device (unnamed) (/dev/ttyd3)
[    10.287] (II) No input driver specified, ignoring this device.
[    10.287] (II) This device may have been added with another device file.
[    10.287] (II) config/udev: Adding input device (unnamed) (/dev/ttyd4)
[    10.287] (II) No input driver specified, ignoring this device.
[    10.287] (II) This device may have been added with another device file.
[    10.288] (II) config/udev: Adding input device (unnamed) (/dev/ttyd5)
[    10.288] (II) No input driver specified, ignoring this device.
[    10.288] (II) This device may have been added with another device file.
[    10.288] (II) config/udev: Adding input device (unnamed) (/dev/ttyd6)
[    10.288] (II) No input driver specified, ignoring this device.
[    10.288] (II) This device may have been added with another device file.
[    10.289] (II) config/udev: Adding input device (unnamed) (/dev/ttyd7)
[    10.289] (II) No input driver specified, ignoring this device.
[    10.289] (II) This device may have been added with another device file.
[    10.289] (II) config/udev: Adding input device (unnamed) (/dev/ttyd8)
[    10.289] (II) No input driver specified, ignoring this device.
[    10.289] (II) This device may have been added with another device file.
[    10.290] (II) config/udev: Adding input device (unnamed) (/dev/ttyd9)
[    10.290] (II) No input driver specified, ignoring this device.
[    10.290] (II) This device may have been added with another device file.
[    10.291] (II) config/udev: Adding input device (unnamed) (/dev/ttyda)
[    10.291] (II) No input driver specified, ignoring this device.
[    10.291] (II) This device may have been added with another device file.
[    10.291] (II) config/udev: Adding input device (unnamed) (/dev/ttydb)
[    10.291] (II) No input driver specified, ignoring this device.
[    10.291] (II) This device may have been added with another device file.
[    10.292] (II) config/udev: Adding input device (unnamed) (/dev/ttydc)
[    10.292] (II) No input driver specified, ignoring this device.
[    10.292] (II) This device may have been added with another device file.
[    10.292] (II) config/udev: Adding input device (unnamed) (/dev/ttydd)
[    10.292] (II) No input driver specified, ignoring this device.
[    10.292] (II) This device may have been added with another device file.
[    10.293] (II) config/udev: Adding input device (unnamed) (/dev/ttyde)
[    10.293] (II) No input driver specified, ignoring this device.
[    10.293] (II) This device may have been added with another device file.
[    10.293] (II) config/udev: Adding input device (unnamed) (/dev/ttydf)
[    10.294] (II) No input driver specified, ignoring this device.
[    10.294] (II) This device may have been added with another device file.
[    10.294] (II) config/udev: Adding input device (unnamed) (/dev/ttye0)
[    10.294] (II) No input driver specified, ignoring this device.
[    10.294] (II) This device may have been added with another device file.
[    10.295] (II) config/udev: Adding input device (unnamed) (/dev/ttye1)
[    10.295] (II) No input driver specified, ignoring this device.
[    10.295] (II) This device may have been added with another device file.
[    10.295] (II) config/udev: Adding input device (unnamed) (/dev/ttye2)
[    10.295] (II) No input driver specified, ignoring this device.
[    10.295] (II) This device may have been added with another device file.
[    10.296] (II) config/udev: Adding input device (unnamed) (/dev/ttye3)
[    10.296] (II) No input driver specified, ignoring this device.
[    10.296] (II) This device may have been added with another device file.
[    10.296] (II) config/udev: Adding input device (unnamed) (/dev/ttye4)
[    10.296] (II) No input driver specified, ignoring this device.
[    10.296] (II) This device may have been added with another device file.
[    10.297] (II) config/udev: Adding input device (unnamed) (/dev/ttye5)
[    10.297] (II) No input driver specified, ignoring this device.
[    10.297] (II) This device may have been added with another device file.
[    10.297] (II) config/udev: Adding input device (unnamed) (/dev/ttye6)
[    10.297] (II) No input driver specified, ignoring this device.
[    10.297] (II) This device may have been added with another device file.
[    10.298] (II) config/udev: Adding input device (unnamed) (/dev/ttye7)
[    10.298] (II) No input driver specified, ignoring this device.
[    10.298] (II) This device may have been added with another device file.
[    10.298] (II) config/udev: Adding input device (unnamed) (/dev/ttye8)
[    10.298] (II) No input driver specified, ignoring this device.
[    10.298] (II) This device may have been added with another device file.
[    10.299] (II) config/udev: Adding input device (unnamed) (/dev/ttye9)
[    10.299] (II) No input driver specified, ignoring this device.
[    10.299] (II) This device may have been added with another device file.
[    10.299] (II) config/udev: Adding input device (unnamed) (/dev/ttyea)
[    10.299] (II) No input driver specified, ignoring this device.
[    10.300] (II) This device may have been added with another device file.
[    10.300] (II) config/udev: Adding input device (unnamed) (/dev/ttyeb)
[    10.300] (II) No input driver specified, ignoring this device.
[    10.300] (II) This device may have been added with another device file.
[    10.301] (II) config/udev: Adding input device (unnamed) (/dev/ttyec)
[    10.301] (II) No input driver specified, ignoring this device.
[    10.301] (II) This device may have been added with another device file.
[    10.301] (II) config/udev: Adding input device (unnamed) (/dev/ttyed)
[    10.301] (II) No input driver specified, ignoring this device.
[    10.302] (II) This device may have been added with another device file.
[    10.302] (II) config/udev: Adding input device (unnamed) (/dev/ttyee)
[    10.302] (II) No input driver specified, ignoring this device.
[    10.302] (II) This device may have been added with another device file.
[    10.302] (II) config/udev: Adding input device (unnamed) (/dev/ttyef)
[    10.303] (II) No input driver specified, ignoring this device.
[    10.303] (II) This device may have been added with another device file.
[    10.303] (II) config/udev: Adding input device (unnamed) (/dev/ttyp0)
[    10.303] (II) No input driver specified, ignoring this device.
[    10.303] (II) This device may have been added with another device file.
[    10.304] (II) config/udev: Adding input device (unnamed) (/dev/ttyp1)
[    10.304] (II) No input driver specified, ignoring this device.
[    10.304] (II) This device may have been added with another device file.
[    10.304] (II) config/udev: Adding input device (unnamed) (/dev/ttyp2)
[    10.304] (II) No input driver specified, ignoring this device.
[    10.304] (II) This device may have been added with another device file.
[    10.305] (II) config/udev: Adding input device (unnamed) (/dev/ttyp3)
[    10.305] (II) No input driver specified, ignoring this device.
[    10.305] (II) This device may have been added with another device file.
[    10.305] (II) config/udev: Adding input device (unnamed) (/dev/ttyp4)
[    10.305] (II) No input driver specified, ignoring this device.
[    10.305] (II) This device may have been added with another device file.
[    10.306] (II) config/udev: Adding input device (unnamed) (/dev/ttyp5)
[    10.306] (II) No input driver specified, ignoring this device.
[    10.306] (II) This device may have been added with another device file.
[    10.306] (II) config/udev: Adding input device (unnamed) (/dev/ttyp6)
[    10.306] (II) No input driver specified, ignoring this device.
[    10.306] (II) This device may have been added with another device file.
[    10.307] (II) config/udev: Adding input device (unnamed) (/dev/ttyp7)
[    10.307] (II) No input driver specified, ignoring this device.
[    10.307] (II) This device may have been added with another device file.
[    10.307] (II) config/udev: Adding input device (unnamed) (/dev/ttyp8)
[    10.307] (II) No input driver specified, ignoring this device.
[    10.308] (II) This device may have been added with another device file.
[    10.308] (II) config/udev: Adding input device (unnamed) (/dev/ttyp9)
[    10.308] (II) No input driver specified, ignoring this device.
[    10.308] (II) This device may have been added with another device file.
[    10.308] (II) config/udev: Adding input device (unnamed) (/dev/ttypa)
[    10.309] (II) No input driver specified, ignoring this device.
[    10.309] (II) This device may have been added with another device file.
[    10.309] (II) config/udev: Adding input device (unnamed) (/dev/ttypb)
[    10.309] (II) No input driver specified, ignoring this device.
[    10.309] (II) This device may have been added with another device file.
[    10.310] (II) config/udev: Adding input device (unnamed) (/dev/ttypc)
[    10.310] (II) No input driver specified, ignoring this device.
[    10.310] (II) This device may have been added with another device file.
[    10.310] (II) config/udev: Adding input device (unnamed) (/dev/ttypd)
[    10.311] (II) No input driver specified, ignoring this device.
[    10.311] (II) This device may have been added with another device file.
[    10.311] (II) config/udev: Adding input device (unnamed) (/dev/ttype)
[    10.311] (II) No input driver specified, ignoring this device.
[    10.311] (II) This device may have been added with another device file.
[    10.312] (II) config/udev: Adding input device (unnamed) (/dev/ttypf)
[    10.312] (II) No input driver specified, ignoring this device.
[    10.312] (II) This device may have been added with another device file.
[    10.312] (II) config/udev: Adding input device (unnamed) (/dev/ttyq0)
[    10.312] (II) No input driver specified, ignoring this device.
[    10.312] (II) This device may have been added with another device file.
[    10.313] (II) config/udev: Adding input device (unnamed) (/dev/ttyq1)
[    10.313] (II) No input driver specified, ignoring this device.
[    10.313] (II) This device may have been added with another device file.
[    10.313] (II) config/udev: Adding input device (unnamed) (/dev/ttyq2)
[    10.313] (II) No input driver specified, ignoring this device.
[    10.313] (II) This device may have been added with another device file.
[    10.314] (II) config/udev: Adding input device (unnamed) (/dev/ttyq3)
[    10.314] (II) No input driver specified, ignoring this device.
[    10.314] (II) This device may have been added with another device file.
[    10.314] (II) config/udev: Adding input device (unnamed) (/dev/ttyq4)
[    10.314] (II) No input driver specified, ignoring this device.
[    10.314] (II) This device may have been added with another device file.
[    10.315] (II) config/udev: Adding input device (unnamed) (/dev/ttyq5)
[    10.315] (II) No input driver specified, ignoring this device.
[    10.315] (II) This device may have been added with another device file.
[    10.315] (II) config/udev: Adding input device (unnamed) (/dev/ttyq6)
[    10.315] (II) No input driver specified, ignoring this device.
[    10.315] (II) This device may have been added with another device file.
[    10.316] (II) config/udev: Adding input device (unnamed) (/dev/ttyq7)
[    10.316] (II) No input driver specified, ignoring this device.
[    10.316] (II) This device may have been added with another device file.
[    10.316] (II) config/udev: Adding input device (unnamed) (/dev/ttyq8)
[    10.316] (II) No input driver specified, ignoring this device.
[    10.316] (II) This device may have been added with another device file.
[    10.317] (II) config/udev: Adding input device (unnamed) (/dev/ttyq9)
[    10.317] (II) No input driver specified, ignoring this device.
[    10.317] (II) This device may have been added with another device file.
[    10.317] (II) config/udev: Adding input device (unnamed) (/dev/ttyqa)
[    10.317] (II) No input driver specified, ignoring this device.
[    10.318] (II) This device may have been added with another device file.
[    10.318] (II) config/udev: Adding input device (unnamed) (/dev/ttyqb)
[    10.318] (II) No input driver specified, ignoring this device.
[    10.318] (II) This device may have been added with another device file.
[    10.318] (II) config/udev: Adding input device (unnamed) (/dev/ttyqc)
[    10.319] (II) No input driver specified, ignoring this device.
[    10.319] (II) This device may have been added with another device file.
[    10.319] (II) config/udev: Adding input device (unnamed) (/dev/ttyqd)
[    10.319] (II) No input driver specified, ignoring this device.
[    10.319] (II) This device may have been added with another device file.
[    10.319] (II) config/udev: Adding input device (unnamed) (/dev/ttyqe)
[    10.320] (II) No input driver specified, ignoring this device.
[    10.320] (II) This device may have been added with another device file.
[    10.320] (II) config/udev: Adding input device (unnamed) (/dev/ttyqf)
[    10.320] (II) No input driver specified, ignoring this device.
[    10.321] (II) This device may have been added with another device file.
[    10.321] (II) config/udev: Adding input device (unnamed) (/dev/ttyr0)
[    10.321] (II) No input driver specified, ignoring this device.
[    10.321] (II) This device may have been added with another device file.
[    10.322] (II) config/udev: Adding input device (unnamed) (/dev/ttyr1)
[    10.322] (II) No input driver specified, ignoring this device.
[    10.322] (II) This device may have been added with another device file.
[    10.322] (II) config/udev: Adding input device (unnamed) (/dev/ttyr2)
[    10.322] (II) No input driver specified, ignoring this device.
[    10.322] (II) This device may have been added with another device file.
[    10.323] (II) config/udev: Adding input device (unnamed) (/dev/ttyr3)
[    10.323] (II) No input driver specified, ignoring this device.
[    10.323] (II) This device may have been added with another device file.
[    10.323] (II) config/udev: Adding input device (unnamed) (/dev/ttyr4)
[    10.323] (II) No input driver specified, ignoring this device.
[    10.323] (II) This device may have been added with another device file.
[    10.324] (II) config/udev: Adding input device (unnamed) (/dev/ttyr5)
[    10.324] (II) No input driver specified, ignoring this device.
[    10.324] (II) This device may have been added with another device file.
[    10.324] (II) config/udev: Adding input device (unnamed) (/dev/ttyr6)
[    10.324] (II) No input driver specified, ignoring this device.
[    10.324] (II) This device may have been added with another device file.
[    10.325] (II) config/udev: Adding input device (unnamed) (/dev/ttyr7)
[    10.325] (II) No input driver specified, ignoring this device.
[    10.325] (II) This device may have been added with another device file.
[    10.325] (II) config/udev: Adding input device (unnamed) (/dev/ttyr8)
[    10.325] (II) No input driver specified, ignoring this device.
[    10.325] (II) This device may have been added with another device file.
[    10.326] (II) config/udev: Adding input device (unnamed) (/dev/ttyr9)
[    10.326] (II) No input driver specified, ignoring this device.
[    10.326] (II) This device may have been added with another device file.
[    10.326] (II) config/udev: Adding input device (unnamed) (/dev/ttyra)
[    10.327] (II) No input driver specified, ignoring this device.
[    10.327] (II) This device may have been added with another device file.
[    10.327] (II) config/udev: Adding input device (unnamed) (/dev/ttyrb)
[    10.327] (II) No input driver specified, ignoring this device.
[    10.327] (II) This device may have been added with another device file.
[    10.328] (II) config/udev: Adding input device (unnamed) (/dev/ttyrc)
[    10.328] (II) No input driver specified, ignoring this device.
[    10.328] (II) This device may have been added with another device file.
[    10.328] (II) config/udev: Adding input device (unnamed) (/dev/ttyrd)
[    10.328] (II) No input driver specified, ignoring this device.
[    10.328] (II) This device may have been added with another device file.
[    10.329] (II) config/udev: Adding input device (unnamed) (/dev/ttyre)
[    10.329] (II) No input driver specified, ignoring this device.
[    10.329] (II) This device may have been added with another device file.
[    10.329] (II) config/udev: Adding input device (unnamed) (/dev/ttyrf)
[    10.329] (II) No input driver specified, ignoring this device.
[    10.329] (II) This device may have been added with another device file.
[    10.330] (II) config/udev: Adding input device (unnamed) (/dev/ttys0)
[    10.330] (II) No input driver specified, ignoring this device.
[    10.330] (II) This device may have been added with another device file.
[    10.331] (II) config/udev: Adding input device (unnamed) (/dev/ttys1)
[    10.331] (II) No input driver specified, ignoring this device.
[    10.331] (II) This device may have been added with another device file.
[    10.331] (II) config/udev: Adding input device (unnamed) (/dev/ttys2)
[    10.331] (II) No input driver specified, ignoring this device.
[    10.331] (II) This device may have been added with another device file.
[    10.332] (II) config/udev: Adding input device (unnamed) (/dev/ttys3)
[    10.332] (II) No input driver specified, ignoring this device.
[    10.332] (II) This device may have been added with another device file.
[    10.332] (II) config/udev: Adding input device (unnamed) (/dev/ttys4)
[    10.332] (II) No input driver specified, ignoring this device.
[    10.332] (II) This device may have been added with another device file.
[    10.333] (II) config/udev: Adding input device (unnamed) (/dev/ttys5)
[    10.333] (II) No input driver specified, ignoring this device.
[    10.333] (II) This device may have been added with another device file.
[    10.333] (II) config/udev: Adding input device (unnamed) (/dev/ttys6)
[    10.333] (II) No input driver specified, ignoring this device.
[    10.333] (II) This device may have been added with another device file.
[    10.334] (II) config/udev: Adding input device (unnamed) (/dev/ttys7)
[    10.334] (II) No input driver specified, ignoring this device.
[    10.334] (II) This device may have been added with another device file.
[    10.334] (II) config/udev: Adding input device (unnamed) (/dev/ttys8)
[    10.334] (II) No input driver specified, ignoring this device.
[    10.334] (II) This device may have been added with another device file.
[    10.335] (II) config/udev: Adding input device (unnamed) (/dev/ttys9)
[    10.335] (II) No input driver specified, ignoring this device.
[    10.335] (II) This device may have been added with another device file.
[    10.335] (II) config/udev: Adding input device (unnamed) (/dev/ttysa)
[    10.335] (II) No input driver specified, ignoring this device.
[    10.335] (II) This device may have been added with another device file.
[    10.336] (II) config/udev: Adding input device (unnamed) (/dev/ttysb)
[    10.336] (II) No input driver specified, ignoring this device.
[    10.336] (II) This device may have been added with another device file.
[    10.336] (II) config/udev: Adding input device (unnamed) (/dev/ttysc)
[    10.336] (II) No input driver specified, ignoring this device.
[    10.337] (II) This device may have been added with another device file.
[    10.337] (II) config/udev: Adding input device (unnamed) (/dev/ttysd)
[    10.337] (II) No input driver specified, ignoring this device.
[    10.337] (II) This device may have been added with another device file.
[    10.337] (II) config/udev: Adding input device (unnamed) (/dev/ttyse)
[    10.338] (II) No input driver specified, ignoring this device.
[    10.338] (II) This device may have been added with another device file.
[    10.338] (II) config/udev: Adding input device (unnamed) (/dev/ttysf)
[    10.338] (II) No input driver specified, ignoring this device.
[    10.338] (II) This device may have been added with another device file.
[    10.339] (II) config/udev: Adding input device (unnamed) (/dev/ttyt0)
[    10.339] (II) No input driver specified, ignoring this device.
[    10.339] (II) This device may have been added with another device file.
[    10.339] (II) config/udev: Adding input device (unnamed) (/dev/ttyt1)
[    10.339] (II) No input driver specified, ignoring this device.
[    10.339] (II) This device may have been added with another device file.
[    10.341] (II) config/udev: Adding input device (unnamed) (/dev/ttyt2)
[    10.341] (II) No input driver specified, ignoring this device.
[    10.341] (II) This device may have been added with another device file.
[    10.341] (II) config/udev: Adding input device (unnamed) (/dev/ttyt3)
[    10.341] (II) No input driver specified, ignoring this device.
[    10.341] (II) This device may have been added with another device file.
[    10.342] (II) config/udev: Adding input device (unnamed) (/dev/ttyt4)
[    10.342] (II) No input driver specified, ignoring this device.
[    10.342] (II) This device may have been added with another device file.
[    10.342] (II) config/udev: Adding input device (unnamed) (/dev/ttyt5)
[    10.342] (II) No input driver specified, ignoring this device.
[    10.343] (II) This device may have been added with another device file.
[    10.343] (II) config/udev: Adding input device (unnamed) (/dev/ttyt6)
[    10.343] (II) No input driver specified, ignoring this device.
[    10.343] (II) This device may have been added with another device file.
[    10.343] (II) config/udev: Adding input device (unnamed) (/dev/ttyt7)
[    10.344] (II) No input driver specified, ignoring this device.
[    10.344] (II) This device may have been added with another device file.
[    10.344] (II) config/udev: Adding input device (unnamed) (/dev/ttyt8)
[    10.344] (II) No input driver specified, ignoring this device.
[    10.344] (II) This device may have been added with another device file.
[    10.345] (II) config/udev: Adding input device (unnamed) (/dev/ttyt9)
[    10.345] (II) No input driver specified, ignoring this device.
[    10.345] (II) This device may have been added with another device file.
[    10.345] (II) config/udev: Adding input device (unnamed) (/dev/ttyta)
[    10.345] (II) No input driver specified, ignoring this device.
[    10.345] (II) This device may have been added with another device file.
[    10.346] (II) config/udev: Adding input device (unnamed) (/dev/ttytb)
[    10.346] (II) No input driver specified, ignoring this device.
[    10.346] (II) This device may have been added with another device file.
[    10.346] (II) config/udev: Adding input device (unnamed) (/dev/ttytc)
[    10.346] (II) No input driver specified, ignoring this device.
[    10.346] (II) This device may have been added with another device file.
[    10.347] (II) config/udev: Adding input device (unnamed) (/dev/ttytd)
[    10.347] (II) No input driver specified, ignoring this device.
[    10.347] (II) This device may have been added with another device file.
[    10.347] (II) config/udev: Adding input device (unnamed) (/dev/ttyte)
[    10.347] (II) No input driver specified, ignoring this device.
[    10.347] (II) This device may have been added with another device file.
[    10.348] (II) config/udev: Adding input device (unnamed) (/dev/ttytf)
[    10.348] (II) No input driver specified, ignoring this device.
[    10.348] (II) This device may have been added with another device file.
[    10.348] (II) config/udev: Adding input device (unnamed) (/dev/ttyu0)
[    10.348] (II) No input driver specified, ignoring this device.
[    10.348] (II) This device may have been added with another device file.
[    10.349] (II) config/udev: Adding input device (unnamed) (/dev/ttyu1)
[    10.349] (II) No input driver specified, ignoring this device.
[    10.349] (II) This device may have been added with another device file.
[    10.349] (II) config/udev: Adding input device (unnamed) (/dev/ttyu2)
[    10.349] (II) No input driver specified, ignoring this device.
[    10.349] (II) This device may have been added with another device file.
[    10.350] (II) config/udev: Adding input device (unnamed) (/dev/ttyu3)
[    10.350] (II) No input driver specified, ignoring this device.
[    10.350] (II) This device may have been added with another device file.
[    10.351] (II) config/udev: Adding input device (unnamed) (/dev/ttyu4)
[    10.351] (II) No input driver specified, ignoring this device.
[    10.351] (II) This device may have been added with another device file.
[    10.351] (II) config/udev: Adding input device (unnamed) (/dev/ttyu5)
[    10.351] (II) No input driver specified, ignoring this device.
[    10.351] (II) This device may have been added with another device file.
[    10.352] (II) config/udev: Adding input device (unnamed) (/dev/ttyu6)
[    10.352] (II) No input driver specified, ignoring this device.
[    10.352] (II) This device may have been added with another device file.
[    10.352] (II) config/udev: Adding input device (unnamed) (/dev/ttyu7)
[    10.352] (II) No input driver specified, ignoring this device.
[    10.352] (II) This device may have been added with another device file.
[    10.353] (II) config/udev: Adding input device (unnamed) (/dev/ttyu8)
[    10.353] (II) No input driver specified, ignoring this device.
[    10.353] (II) This device may have been added with another device file.
[    10.353] (II) config/udev: Adding input device (unnamed) (/dev/ttyu9)
[    10.354] (II) No input driver specified, ignoring this device.
[    10.354] (II) This device may have been added with another device file.
[    10.354] (II) config/udev: Adding input device (unnamed) (/dev/ttyua)
[    10.354] (II) No input driver specified, ignoring this device.
[    10.354] (II) This device may have been added with another device file.
[    10.354] (II) config/udev: Adding input device (unnamed) (/dev/ttyub)
[    10.355] (II) No input driver specified, ignoring this device.
[    10.355] (II) This device may have been added with another device file.
[    10.355] (II) config/udev: Adding input device (unnamed) (/dev/ttyuc)
[    10.355] (II) No input driver specified, ignoring this device.
[    10.355] (II) This device may have been added with another device file.
[    10.356] (II) config/udev: Adding input device (unnamed) (/dev/ttyud)
[    10.356] (II) No input driver specified, ignoring this device.
[    10.356] (II) This device may have been added with another device file.
[    10.356] (II) config/udev: Adding input device (unnamed) (/dev/ttyue)
[    10.356] (II) No input driver specified, ignoring this device.
[    10.356] (II) This device may have been added with another device file.
[    10.357] (II) config/udev: Adding input device (unnamed) (/dev/ttyuf)
[    10.357] (II) No input driver specified, ignoring this device.
[    10.357] (II) This device may have been added with another device file.
[    10.357] (II) config/udev: Adding input device (unnamed) (/dev/ttyv0)
[    10.357] (II) No input driver specified, ignoring this device.
[    10.357] (II) This device may have been added with another device file.
[    10.358] (II) config/udev: Adding input device (unnamed) (/dev/ttyv1)
[    10.358] (II) No input driver specified, ignoring this device.
[    10.358] (II) This device may have been added with another device file.
[    10.358] (II) config/udev: Adding input device (unnamed) (/dev/ttyv2)
[    10.358] (II) No input driver specified, ignoring this device.
[    10.359] (II) This device may have been added with another device file.
[    10.359] (II) config/udev: Adding input device (unnamed) (/dev/ttyv3)
[    10.359] (II) No input driver specified, ignoring this device.
[    10.359] (II) This device may have been added with another device file.
[    10.359] (II) config/udev: Adding input device (unnamed) (/dev/ttyv4)
[    10.360] (II) No input driver specified, ignoring this device.
[    10.360] (II) This device may have been added with another device file.
[    10.360] (II) config/udev: Adding input device (unnamed) (/dev/ttyv5)
[    10.360] (II) No input driver specified, ignoring this device.
[    10.360] (II) This device may have been added with another device file.
[    10.361] (II) config/udev: Adding input device (unnamed) (/dev/ttyv6)
[    10.361] (II) No input driver specified, ignoring this device.
[    10.361] (II) This device may have been added with another device file.
[    10.361] (II) config/udev: Adding input device (unnamed) (/dev/ttyv7)
[    10.362] (II) No input driver specified, ignoring this device.
[    10.362] (II) This device may have been added with another device file.
[    10.362] (II) config/udev: Adding input device (unnamed) (/dev/ttyv8)
[    10.362] (II) No input driver specified, ignoring this device.
[    10.362] (II) This device may have been added with another device file.
[    10.363] (II) config/udev: Adding input device (unnamed) (/dev/ttyv9)
[    10.363] (II) No input driver specified, ignoring this device.
[    10.363] (II) This device may have been added with another device file.
[    10.363] (II) config/udev: Adding input device (unnamed) (/dev/ttyva)
[    10.363] (II) No input driver specified, ignoring this device.
[    10.363] (II) This device may have been added with another device file.
[    10.364] (II) config/udev: Adding input device (unnamed) (/dev/ttyvb)
[    10.364] (II) No input driver specified, ignoring this device.
[    10.364] (II) This device may have been added with another device file.
[    10.364] (II) config/udev: Adding input device (unnamed) (/dev/ttyvc)
[    10.364] (II) No input driver specified, ignoring this device.
[    10.364] (II) This device may have been added with another device file.
[    10.365] (II) config/udev: Adding input device (unnamed) (/dev/ttyvd)
[    10.365] (II) No input driver specified, ignoring this device.
[    10.365] (II) This device may have been added with another device file.
[    10.365] (II) config/udev: Adding input device (unnamed) (/dev/ttyve)
[    10.365] (II) No input driver specified, ignoring this device.
[    10.365] (II) This device may have been added with another device file.
[    10.366] (II) config/udev: Adding input device (unnamed) (/dev/ttyvf)
[    10.366] (II) No input driver specified, ignoring this device.
[    10.366] (II) This device may have been added with another device file.
[    10.366] (II) config/udev: Adding input device (unnamed) (/dev/ttyw0)
[    10.366] (II) No input driver specified, ignoring this device.
[    10.366] (II) This device may have been added with another device file.
[    10.367] (II) config/udev: Adding input device (unnamed) (/dev/ttyw1)
[    10.367] (II) No input driver specified, ignoring this device.
[    10.367] (II) This device may have been added with another device file.
[    10.367] (II) config/udev: Adding input device (unnamed) (/dev/ttyw2)
[    10.367] (II) No input driver specified, ignoring this device.
[    10.367] (II) This device may have been added with another device file.
[    10.368] (II) config/udev: Adding input device (unnamed) (/dev/ttyw3)
[    10.368] (II) No input driver specified, ignoring this device.
[    10.368] (II) This device may have been added with another device file.
[    10.368] (II) config/udev: Adding input device (unnamed) (/dev/ttyw4)
[    10.368] (II) No input driver specified, ignoring this device.
[    10.368] (II) This device may have been added with another device file.
[    10.369] (II) config/udev: Adding input device (unnamed) (/dev/ttyw5)
[    10.369] (II) No input driver specified, ignoring this device.
[    10.369] (II) This device may have been added with another device file.
[    10.369] (II) config/udev: Adding input device (unnamed) (/dev/ttyw6)
[    10.370] (II) No input driver specified, ignoring this device.
[    10.370] (II) This device may have been added with another device file.
[    10.370] (II) config/udev: Adding input device (unnamed) (/dev/ttyw7)
[    10.370] (II) No input driver specified, ignoring this device.
[    10.370] (II) This device may have been added with another device file.
[    10.371] (II) config/udev: Adding input device (unnamed) (/dev/ttyw8)
[    10.371] (II) No input driver specified, ignoring this device.
[    10.371] (II) This device may have been added with another device file.
[    10.371] (II) config/udev: Adding input device (unnamed) (/dev/ttyw9)
[    10.371] (II) No input driver specified, ignoring this device.
[    10.372] (II) This device may have been added with another device file.
[    10.372] (II) config/udev: Adding input device (unnamed) (/dev/ttywa)
[    10.372] (II) No input driver specified, ignoring this device.
[    10.372] (II) This device may have been added with another device file.
[    10.372] (II) config/udev: Adding input device (unnamed) (/dev/ttywb)
[    10.373] (II) No input driver specified, ignoring this device.
[    10.373] (II) This device may have been added with another device file.
[    10.373] (II) config/udev: Adding input device (unnamed) (/dev/ttywc)
[    10.373] (II) No input driver specified, ignoring this device.
[    10.373] (II) This device may have been added with another device file.
[    10.374] (II) config/udev: Adding input device (unnamed) (/dev/ttywd)
[    10.374] (II) No input driver specified, ignoring this device.
[    10.374] (II) This device may have been added with another device file.
[    10.374] (II) config/udev: Adding input device (unnamed) (/dev/ttywe)
[    10.374] (II) No input driver specified, ignoring this device.
[    10.374] (II) This device may have been added with another device file.
[    10.375] (II) config/udev: Adding input device (unnamed) (/dev/ttywf)
[    10.375] (II) No input driver specified, ignoring this device.
[    10.375] (II) This device may have been added with another device file.
[    10.375] (II) config/udev: Adding input device (unnamed) (/dev/ttyx0)
[    10.375] (II) No input driver specified, ignoring this device.
[    10.375] (II) This device may have been added with another device file.
[    10.376] (II) config/udev: Adding input device (unnamed) (/dev/ttyx1)
[    10.376] (II) No input driver specified, ignoring this device.
[    10.376] (II) This device may have been added with another device file.
[    10.376] (II) config/udev: Adding input device (unnamed) (/dev/ttyx2)
[    10.376] (II) No input driver specified, ignoring this device.
[    10.376] (II) This device may have been added with another device file.
[    10.377] (II) config/udev: Adding input device (unnamed) (/dev/ttyx3)
[    10.377] (II) No input driver specified, ignoring this device.
[    10.377] (II) This device may have been added with another device file.
[    10.377] (II) config/udev: Adding input device (unnamed) (/dev/ttyx4)
[    10.377] (II) No input driver specified, ignoring this device.
[    10.378] (II) This device may have been added with another device file.
[    10.378] (II) config/udev: Adding input device (unnamed) (/dev/ttyx5)
[    10.378] (II) No input driver specified, ignoring this device.
[    10.378] (II) This device may have been added with another device file.
[    10.378] (II) config/udev: Adding input device (unnamed) (/dev/ttyx6)
[    10.379] (II) No input driver specified, ignoring this device.
[    10.379] (II) This device may have been added with another device file.
[    10.379] (II) config/udev: Adding input device (unnamed) (/dev/ttyx7)
[    10.379] (II) No input driver specified, ignoring this device.
[    10.379] (II) This device may have been added with another device file.
[    10.380] (II) config/udev: Adding input device (unnamed) (/dev/ttyx8)
[    10.380] (II) No input driver specified, ignoring this device.
[    10.380] (II) This device may have been added with another device file.
[    10.380] (II) config/udev: Adding input device (unnamed) (/dev/ttyx9)
[    10.381] (II) No input driver specified, ignoring this device.
[    10.381] (II) This device may have been added with another device file.
[    10.381] (II) config/udev: Adding input device (unnamed) (/dev/ttyxa)
[    10.381] (II) No input driver specified, ignoring this device.
[    10.381] (II) This device may have been added with another device file.
[    10.382] (II) config/udev: Adding input device (unnamed) (/dev/ttyxb)
[    10.382] (II) No input driver specified, ignoring this device.
[    10.382] (II) This device may have been added with another device file.
[    10.382] (II) config/udev: Adding input device (unnamed) (/dev/ttyxc)
[    10.382] (II) No input driver specified, ignoring this device.
[    10.382] (II) This device may have been added with another device file.
[    10.383] (II) config/udev: Adding input device (unnamed) (/dev/ttyxd)
[    10.383] (II) No input driver specified, ignoring this device.
[    10.383] (II) This device may have been added with another device file.
[    10.383] (II) config/udev: Adding input device (unnamed) (/dev/ttyxe)
[    10.383] (II) No input driver specified, ignoring this device.
[    10.383] (II) This device may have been added with another device file.
[    10.384] (II) config/udev: Adding input device (unnamed) (/dev/ttyxf)
[    10.384] (II) No input driver specified, ignoring this device.
[    10.384] (II) This device may have been added with another device file.
[    10.384] (II) config/udev: Adding input device (unnamed) (/dev/ttyy0)
[    10.384] (II) No input driver specified, ignoring this device.
[    10.384] (II) This device may have been added with another device file.
[    10.385] (II) config/udev: Adding input device (unnamed) (/dev/ttyy1)
[    10.385] (II) No input driver specified, ignoring this device.
[    10.385] (II) This device may have been added with another device file.
[    10.385] (II) config/udev: Adding input device (unnamed) (/dev/ttyy2)
[    10.385] (II) No input driver specified, ignoring this device.
[    10.385] (II) This device may have been added with another device file.
[    10.386] (II) config/udev: Adding input device (unnamed) (/dev/ttyy3)
[    10.386] (II) No input driver specified, ignoring this device.
[    10.386] (II) This device may have been added with another device file.
[    10.386] (II) config/udev: Adding input device (unnamed) (/dev/ttyy4)
[    10.386] (II) No input driver specified, ignoring this device.
[    10.386] (II) This device may have been added with another device file.
[    10.387] (II) config/udev: Adding input device (unnamed) (/dev/ttyy5)
[    10.387] (II) No input driver specified, ignoring this device.
[    10.387] (II) This device may have been added with another device file.
[    10.387] (II) config/udev: Adding input device (unnamed) (/dev/ttyy6)
[    10.387] (II) No input driver specified, ignoring this device.
[    10.387] (II) This device may have been added with another device file.
[    10.388] (II) config/udev: Adding input device (unnamed) (/dev/ttyy7)
[    10.388] (II) No input driver specified, ignoring this device.
[    10.388] (II) This device may have been added with another device file.
[    10.388] (II) config/udev: Adding input device (unnamed) (/dev/ttyy8)
[    10.389] (II) No input driver specified, ignoring this device.
[    10.389] (II) This device may have been added with another device file.
[    10.389] (II) config/udev: Adding input device (unnamed) (/dev/ttyy9)
[    10.389] (II) No input driver specified, ignoring this device.
[    10.389] (II) This device may have been added with another device file.
[    10.390] (II) config/udev: Adding input device (unnamed) (/dev/ttyya)
[    10.390] (II) No input driver specified, ignoring this device.
[    10.390] (II) This device may have been added with another device file.
[    10.390] (II) config/udev: Adding input device (unnamed) (/dev/ttyyb)
[    10.391] (II) No input driver specified, ignoring this device.
[    10.391] (II) This device may have been added with another device file.
[    10.391] (II) config/udev: Adding input device (unnamed) (/dev/ttyyc)
[    10.391] (II) No input driver specified, ignoring this device.
[    10.391] (II) This device may have been added with another device file.
[    10.392] (II) config/udev: Adding input device (unnamed) (/dev/ttyyd)
[    10.392] (II) No input driver specified, ignoring this device.
[    10.392] (II) This device may have been added with another device file.
[    10.392] (II) config/udev: Adding input device (unnamed) (/dev/ttyye)
[    10.392] (II) No input driver specified, ignoring this device.
[    10.392] (II) This device may have been added with another device file.
[    10.393] (II) config/udev: Adding input device (unnamed) (/dev/ttyyf)
[    10.393] (II) No input driver specified, ignoring this device.
[    10.393] (II) This device may have been added with another device file.
[    10.393] (II) config/udev: Adding input device (unnamed) (/dev/ttyz0)
[    10.393] (II) No input driver specified, ignoring this device.
[    10.393] (II) This device may have been added with another device file.
[    10.394] (II) config/udev: Adding input device (unnamed) (/dev/ttyz1)
[    10.394] (II) No input driver specified, ignoring this device.
[    10.394] (II) This device may have been added with another device file.
[    10.394] (II) config/udev: Adding input device (unnamed) (/dev/ttyz2)
[    10.394] (II) No input driver specified, ignoring this device.
[    10.394] (II) This device may have been added with another device file.
[    10.395] (II) config/udev: Adding input device (unnamed) (/dev/ttyz3)
[    10.395] (II) No input driver specified, ignoring this device.
[    10.395] (II) This device may have been added with another device file.
[    10.395] (II) config/udev: Adding input device (unnamed) (/dev/ttyz4)
[    10.395] (II) No input driver specified, ignoring this device.
[    10.396] (II) This device may have been added with another device file.
[    10.396] (II) config/udev: Adding input device (unnamed) (/dev/ttyz5)
[    10.396] (II) No input driver specified, ignoring this device.
[    10.396] (II) This device may have been added with another device file.
[    10.396] (II) config/udev: Adding input device (unnamed) (/dev/ttyz6)
[    10.397] (II) No input driver specified, ignoring this device.
[    10.397] (II) This device may have been added with another device file.
[    10.397] (II) config/udev: Adding input device (unnamed) (/dev/ttyz7)
[    10.397] (II) No input driver specified, ignoring this device.
[    10.397] (II) This device may have been added with another device file.
[    10.398] (II) config/udev: Adding input device (unnamed) (/dev/ttyz8)
[    10.398] (II) No input driver specified, ignoring this device.
[    10.398] (II) This device may have been added with another device file.
[    10.398] (II) config/udev: Adding input device (unnamed) (/dev/ttyz9)
[    10.398] (II) No input driver specified, ignoring this device.
[    10.398] (II) This device may have been added with another device file.
[    10.399] (II) config/udev: Adding input device (unnamed) (/dev/ttyza)
[    10.399] (II) No input driver specified, ignoring this device.
[    10.399] (II) This device may have been added with another device file.
[    10.399] (II) config/udev: Adding input device (unnamed) (/dev/ttyzb)
[    10.399] (II) No input driver specified, ignoring this device.
[    10.399] (II) This device may have been added with another device file.
[    10.400] (II) config/udev: Adding input device (unnamed) (/dev/ttyzc)
[    10.400] (II) No input driver specified, ignoring this device.
[    10.400] (II) This device may have been added with another device file.
[    10.401] (II) config/udev: Adding input device (unnamed) (/dev/ttyzd)
[    10.401] (II) No input driver specified, ignoring this device.
[    10.401] (II) This device may have been added with another device file.
[    10.401] (II) config/udev: Adding input device (unnamed) (/dev/ttyze)
[    10.401] (II) No input driver specified, ignoring this device.
[    10.401] (II) This device may have been added with another device file.
[    10.402] (II) config/udev: Adding input device (unnamed) (/dev/ttyzf)
[    10.402] (II) No input driver specified, ignoring this device.
[    10.402] (II) This device may have been added with another device file.
#16 lore raw

Looks like: https://bugzilla.redhat.com/show_bug.cgi?id=1650634

Good luck!

Quoted 98 lines · Stanisavljevic

Hy Marc,

Here is the log file attached in this mail.

Nikola

*De :* Marc Ferland <[email protected]> *Envoyé :* mardi 5 février 2019 16:10
*À :* Stanisavljevic <[email protected]> *Cc :* Yocto discussion list <[email protected]> *Objet :* Re: [yocto] yocto touchscreen

On Mon, Feb 4, 2019 at 6:17 AM Stanisavljevic <
[email protected]> wrote:

Hy Team,

I have a problem

I buid a custom os for AM335x processor and I used yocto to do it.

I build a first version of this os with version krogoth and it work fine.

Now I build a second version of this os with version sumo and the touchscreen work fine during boot process but when kernel is loaded, touchscreen freeze / lock and impossible to use it.

The terminal is printed on the touchscreen but the screen is locked, impossible to write a command or to move the mouse to select, ….

Here is the log of boot to the user session (log got with serial communication between PC and board) :

...

X.Org X Server 1.19.6

Release Date: 2017-12-20

X Protocol Version 11, Revision 0

Build Operating System: Linux 4.15.0-38-generic x86_64

Current Operating System: Linux polycaptil-machine-am335x-evmsk 4.4.19-ge581bb1cac #1 PREEMPT Thu May 24 11:42:17 CEST 2018 armv7l

Kernel command line: console=ttyO0,115200 root=/dev/mmcblk0p3 rw

Build Date: 05 November 2018 09:33:21PM

Current version of pixman: 0.34.0

Before reporting problems, check http://wiki.x.org

to make sure that you have the latest version.

Markers: (--) probed, (**) from config file, (==) default setting,

(++) from command line, (!!) notice, (II) informational,

(WW) warning, (EE) error, (NI) not implemented, (??) unknown.

(==) Log file: "/var/log/Xorg.0.log", Time: Fri Feb 1 20:08:02 2019

(==) Using config file: "/etc/X11/xorg.conf"

(==) Using system config directory "/usr/share/X11/xorg.conf.d"

done.

Please post the full /var/log/Xorg.log.

Marc